Release status - open patches, pull requests etc.
Hi everybody,
as you are probably aware of, we have only 4 more days with an open merge window left (the merge window for 1.3.3 is open until Mar 31, 23:59:59 MET).
I think I have now applied (or rejected) all patches I felt responsible for myself, i. e. which (in my opinion) don't fall into the domain of some custodian.
Please come forward now if you have submitted any patches that should go into 1.3.3 but are not in the master branch yet.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If programming was easy, they wouldn't need something as complicated
as a human being to do it, now would they?
- L. Wall & R. L. Schwartz, _Programming Perl_Quoted 6 lines · Wolfgang Denk
Hi everybody,
as you are probably aware of, we have only 4 more days with an open merge window left (the merge window for 1.3.3 is open until Mar 31, 23:59:59 MET).
Quoted 6 lines
I think I have now applied (or rejected) all patches I felt responsible for myself, i. e. which (in my opinion) don't fall into the domain of some custodian.
Please come forward now if you have submitted any patches that should go into 1.3.3 but are not in the master branch yet.
I don't know Peter's planning, and yes, as it is ARM, Wolfgang you are not responsible for it. But it would be nice if we still can get
[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38505
in.
Many thanks
Dirk
Dear Dirk,
Quoted 4 lines · in message <[email protected]> you wrote:
Quoted 3 lines
Please come forward now if you have submitted any patches that should go into 1.3.3 but are not in the master branch yet.
Quoted 8 lines
I don't know Peter's planning, and yes, as it is ARM, Wolfgang you are not responsible for it. But it would be nice if we still can get
[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38505
in.
I would like to see this go in, too. It's been discussed long enough by now...
Peter, can you already estimate what you manage to get in befoire the merge window closes?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It would be illogical to kill without reason -- Spock, "Journey to Babel", stardate 3842.4
Quoted 26 lines
-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de]
Sent: 27 March 2008 22:16
To: Dirk Behme
Cc: Peter Pearse; u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Release status - open patches, pull requests etc.Dear Dirk,
Quoted 5 lines · in message <[email protected]> you wrote:
Quoted 3 lines
Please come forward now if you have submitted any patches that should go into 1.3.3 but are not in the master branch yet.
I don't know Peter's planning, and yes, as it is ARM,
Wolfgang you are
Quoted 7 lines
not responsible for it. But it would be nice if we still can get
[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38505
Quoted 9 lines
Quoted 1 line
in.
I would like to see this go in, too. It's been discussed long
enough by now...Peter, can you already estimate what you manage to get in befoire the merge window closes?
Patch status: (2008-03-28)
[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup Ready today
[PATCH] DM644x: This patch removes all boardspecific code from the arch. part for DM644x (DaVinci) boards
[PATCH] DM644x: (2nd try) This adds support fortheProdrivePMDRA board, based on a DM6441
Awaiting resubmission after
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38498/
[PATCH] ixp: Support for NSLU2
Ready today/tomorrow
[PATCH] Altera Stratix II support
Ready todaytomorrow
[PATCH 0/7] Respin of Sascha Hauer's i.MX31support plus MX31ADS Awaiting resolution of [PATCH v2 4/7] add SMSC LAN9x1x Network driver
- I'll get the current submission ready today
Regards
Peter
Quoted 7 lines · In message <[email protected]> you wrote:
[PATCH] DM644x: This patch removes all boardspecific code from the arch. part for DM644x (DaVinci) boards
[PATCH] DM644x: (2nd try) This adds support fortheProdrivePMDRA board, based on a DM6441
Awaiting resubmission after
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38498/
That was a mistake on my side - seems I missed one message on the list. Please check again.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de HR Manager to job candidate "I see you've had no computer training. Although that qualifies you for upper management, it means you're under-qualified for our entry level positions."
Quoted 14 lines
-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de]
Sent: 28 March 2008 09:11
To: Peter Pearse
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Release status - open patches, pull requests etc.Quoted 2 lines · In message <[email protected]> you wrote:
[PATCH] DM644x: This patch removes all boardspecific code
from the arch.
Quoted 8 lines
Quoted 2 lines
part for DM644x (DaVinci) boards
[PATCH] DM644x: (2nd try) This adds supportfortheProdrivePMDRA board,
Quoted 2 lines
based on a DM6441 Awaiting resubmission after
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38498/That was a mistake on my side - seems I missed one message on the list. Please check again.
Patch status: (2008-03-28) Second version
[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup Ready today
[PATCH] DM644x: This patch removes all boardspecific code from the arch. part for DM644x (DaVinci) boards
[PATCH] DM644x: (2nd try) This adds support fortheProdrivePMDRA board, based on a DM6441
Ready tomorrow
[PATCH] ixp: Support for NSLU2
Ready today/tomorrow
[PATCH] Altera Stratix II support
Ready today/tomorrow
[PATCH 0/7] Respin of Sascha Hauer's i.MX31support plus MX31ADS Awaiting resolution of [PATCH v2 4/7] add SMSC LAN9x1x Network driver
- I'll get the current submission ready today
Regards
Peter
Quoted 31 lines · Peter Pearse
Quoted 14 lines
-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de]
Sent: 28 March 2008 09:11
To: Peter Pearse
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Release status - open patches, pull requests etc.Quoted 2 lines · In message <[email protected]> you wrote:
[PATCH] DM644x: This patch removes all boardspecific code
from the arch.
Quoted 8 lines
Quoted 2 lines
part for DM644x (DaVinci) boards
[PATCH] DM644x: (2nd try) This adds supportfortheProdrivePMDRA board,
Quoted 2 lines
based on a DM6441 Awaiting resubmission after
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38498/That was a mistake on my side - seems I missed one message on the list. Please check again.
Patch status: (2008-03-28) Second version
[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup Ready today
[PATCH] DM644x: This patch removes all boardspecific code from the arch. part for DM644x (DaVinci) boards
Quoted 6 lines
[PATCH] DM644x: (2nd try) This adds support fortheProdrivePMDRA board, based on a DM6441
Ready tomorrow[PATCH] ixp: Support for NSLU2
Ready today/tomorrow
I'll take care of this and the AT91 patch today and tomorrow
Best Regards,
J.
Quoted 2 lines · Wolfgang Denk
Please come forward now if you have submitted any patches that should go into 1.3.3 but are not in the master branch yet.
Just FYI, I don't have any patches queued up for avr32 this time. If anyone thinks I've missed something, please speak up.
Oh, and avr32 users: please give the latest 1.3.2 release from ftp://ftp.denx.de/pub/u-boot/ a good testing, or grab the latest sources from the master git repository. I'm not going to make any new "atmel" releases until I've actually got something in my queue.
Haavard
Quoted 7 lines · Wolfgang Denk
Hi everybody,
as you are probably aware of, we have only 4 more days with an open merge window left (the merge window for 1.3.3 is open until Mar 31, 23:59:59 MET).
Quoted 7 lines
I think I have now applied (or rejected) all patches I felt responsible for myself, i. e. which (in my opinion) don't fall into the domain of some custodian.
Please come forward now if you have submitted any patches that should go into 1.3.3 but are not in the master branch yet.
Hi Wolfgang,
I little while ago I submitted patches for two temperature sensors
drivers: a bug fix for the LM75 driver, and a bug fix and clean-up for the LM73 driver. The LM75 changes are in the master branch, but the last time I checked the LM73 changes were not there.
Best regards,
Larry
Quoted 5 lines · In message <[email protected]> you wrote:
I little while ago I submitted patches for two temperature sensors
drivers: a bug fix for the LM75 driver, and a bug fix and clean-up for the LM73 driver. The LM75 changes are in the master branch, but the last time I checked the LM73 changes were not there.
Thanks for the reminder. Applied now.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Unix is like a toll road on which you have to stop every 50 feet to
pay another nickel. But hey! You only feel 5 cents poorer each time.
- Larry Wall in <[email protected]>