isicom: bring into coding style
PATCH 1/1 isicom: bring into coding style
Signed-off-by Alan Cox <[email protected]>
drivers/char/isicom.c +55 -52
@@ -126,8 +126,8 @@#include <linux/delay.h> #include <linux/ioport.h> -#include <asm/uaccess.h> -#include <asm/io.h> +#include <linux/uaccess.h> +#include <linux/io.h> #include <asm/system.h> #include <linux/pci.h>
@@ -189,7 +189,7 @@unsigned short status;unsigned short port_status;/* each bit for each port */ unsigned short shift_count; -struct isi_port * ports; +struct isi_port *ports;signed char count;spinlock_t card_lock;/* Card wide lock 11/5/00 -sameer */ unsigned long flags;
@@ -205,11 +205,11 @@u16 channel;u16 status;u16 closing_wait; -struct isi_board * card; -struct tty_struct * tty; +struct isi_board *card; +struct tty_struct *tty;wait_queue_head_t close_wait;wait_queue_head_t open_wait; -unsigned char * xmit_buf; +unsigned char *xmit_buf;int xmit_head;int xmit_tail;int xmit_cnt;
@@ -405,7 +405,7 @@/* find next active board */ card = (prev_card +1 ) &0x0003 ; -while (count-- >0 ) { +while (count-- >0 ) {if (isi_card[card].status &BOARD_ACTIVE )break ; card = (card +1 ) &0x0003 ;
@@ -428,7 +428,7 @@if (retries >=100 ) goto unlock; -for (;count >0 ;count--, port++) { +for (; count >0 ; count--, port++) {/* port not active or tx disabled to force flow control */ if (!(port->flags &ASYNC_INITIALIZED ) || !(port->status &ISI_TXOK ))
@@ -471,9 +471,10 @@break ; } } -if (cnt <=0 )break ; +if (cnt <=0 ) +break ; word_count = cnt >>1 ; -outsw (base, port->xmit_buf+port->xmit_tail,word_count); +outsw (base, port->xmit_buf+port->xmit_tail, word_count); port->xmit_tail = (port->xmit_tail + (word_count <<1 )) & (SERIAL_XMIT_SIZE -1 ); txcount -= (word_count <<1 );
@@ -556,7 +557,7 @@ tty = port->tty;if (tty ==NULL ) { word_count = byte_count >>1 ; -while (byte_count >1 ) { +while (byte_count >1 ) {inw (base); byte_count -=2 ; }
@@ -569,7 +570,7 @@if (header &0x8000 ) {/* Status Packet */ header =inw (base); -switch (header &0xff ) { +switch (header &0xff ) {case 0 :/* Change in EIA signals */ if (port->flags &ASYNC_CHECK_CD ) {if (port->status &ISI_DCD ) {
@@ -656,7 +657,8 @@if (byte_count >0 ) {pr_dbg ("Intr(0x%lx:%d): Flip buffer overflow! dropping " "bytes...\n" , base, channel +1 ); -while (byte_count >0 ) {/* drain out unread xtra data */ +/* drain out unread xtra data */ +while (byte_count >0 ) {inw (base); byte_count -=2 ; }
@@ -679,8 +681,11 @@ shift_count = card->shift_count;unsigned char flow_ctrl; -if (!(tty = port->tty) || !tty->termios) + tty = port->tty; + +if (tty ==NULL )return ; +/* FIXME: Switch to new tty baud API */ baud =C_BAUD (tty);if (baud &CBAUDEX ) { baud &= ~CBAUDEX ;
@@ -706,7 +711,7 @@if ((port->flags &ASYNC_SPD_MASK ) ==ASYNC_SPD_HI ) baud++;/* 57.6 Kbps */ if ((port->flags &ASYNC_SPD_MASK ) ==ASYNC_SPD_VHI ) - baud +=2 ;/* 115 Kbps */ + baud +=2 ;/* 115 Kbps */ if ((port->flags &ASYNC_SPD_MASK ) ==ASYNC_SPD_SHI ) baud +=3 ;/* 230 kbps*/ if ((port->flags &ASYNC_SPD_MASK ) ==ASYNC_SPD_WARP )
@@ -716,15 +721,14 @@/* hang up */ drop_dtr (port);return ; - } -else + }else raise_dtr (port);if (WaitTillCardIsFree (base) ==0 ) { -outw (0x8000 | (channel << shift_count) |0x03 , base); +outw (0x8000 | (channel << shift_count) |0x03 , base);outw (linuxb_to_isib[baud] <<8 |0x03 , base); channel_setup =0 ; -switch (C_CSIZE (tty)) { +switch (C_CSIZE (tty)) {case CS5 : channel_setup |=ISICOM_CS5 ;break ;
@@ -767,7 +771,7 @@ flow_ctrl |=ISICOM_INITIATE_XONXOFF ;if (WaitTillCardIsFree (base) ==0 ) { -outw (0x8000 | (channel << shift_count) |0x04 , base); +outw (0x8000 | (channel << shift_count) |0x04 , base);outw (flow_ctrl <<8 |0x05 , base);outw ((STOP_CHAR (tty)) <<8 | (START_CHAR (tty)), base);InterruptTheCard (base);
@@ -805,15 +809,13 @@struct isi_board *card = port->card;unsigned long flags; -if (port->flags &ASYNC_INITIALIZED ) { +if (port->flags &ASYNC_INITIALIZED )return 0 ; - }if (!port->xmit_buf) { -unsigned long page; - -if (!(page =get_zeroed_page (GFP_KERNEL ))) +/* Relies on BKL */ +unsigned long page =get_zeroed_page (GFP_KERNEL ); +if (page ==NULL )return -ENOMEM ; -if (port->xmit_buf) {free_page (page);return -ERESTARTSYS ;
@@ -949,21 +951,18 @@ port->count++; tty->driver_data = port; port->tty = tty; -if ((error =isicom_setup_port (port))!=0 ) -return error; -if ((error =block_til_ready (tty, filp, port))!=0 ) -return error; - -return 0 ; + error =isicom_setup_port (port); +if (error ==0 ) + error =block_til_ready (tty, filp, port); +return error; }/* close et all */ static inline void isicom_shutdown_board (struct isi_board *bp) { -if (bp->status &BOARD_ACTIVE ) { +if (bp->status &BOARD_ACTIVE ) bp->status &= ~BOARD_ACTIVE ; - } }/* card->lock HAS to be held */
@@ -1119,7 +1118,7 @@spin_lock_irqsave (&card->card_lock, flags); -while (1 ) { +while (1 ) { cnt =min_t (int, count,min (SERIAL_XMIT_SIZE - port->xmit_cnt -1 ,SERIAL_XMIT_SIZE - port->xmit_head));if (cnt <=0 )
@@ -1140,28 +1139,29 @@ }/* put_char et all */ -static void isicom_put_char (struct tty_struct *tty,unsigned char ch) +static int isicom_put_char (struct tty_struct *tty,unsigned char ch) {struct isi_port *port = tty->driver_data;struct isi_board *card = port->card;unsigned long flags;if (isicom_paranoia_check (port, tty->name,"isicom_put_char" )) -return ; +return 0 ;if (!port->xmit_buf) -return ; +return 0 ;spin_lock_irqsave (&card->card_lock, flags);if (port->xmit_cnt >=SERIAL_XMIT_SIZE -1 ) {spin_unlock_irqrestore (&card->card_lock, flags); -return ; +return 0 ; } port->xmit_buf[port->xmit_head++] = ch; port->xmit_head &= (SERIAL_XMIT_SIZE -1 ); port->xmit_cnt++;spin_unlock_irqrestore (&card->card_lock, flags); +return 1 ; }/* flush_chars et all */
@@ -1286,10 +1286,9 @@unlock_kernel ();return -EPERM ; } - port->flags = ((port->flags & ~ASYNC_USR_MASK ) | + port->flags = ((port->flags & ~ASYNC_USR_MASK ) | (newinfo.flags &ASYNC_USR_MASK )); - } -else { + }else { port->close_delay = newinfo.close_delay; port->closing_wait = newinfo.closing_wait; port->flags = ((port->flags & ~ASYNC_FLAGS) |
@@ -1336,7 +1335,7 @@if (isicom_paranoia_check (port, tty->name,"isicom_ioctl" ))return -ENODEV ; -switch (cmd) { +switch (cmd) {case TCSBRK : retval =tty_check_change (tty);if (retval)
@@ -1585,7 +1584,7 @@default :dev_err (&pdev->dev,"Unknown signature.\n" ); goto end; - } + } retval =request_firmware (&fw, name, &pdev->dev);if (retval)
@@ -1613,7 +1612,8 @@if (WaitTillCardIsFree (base)) goto errrelfw; -if ((status =inw (base +0x4 )) !=0 ) { + status =inw (base +0x4 ); +if (status !=0 ) {dev_warn (&pdev->dev,"Card%d rejected load header:\n" KERN_WARNING "Address:0x%x\n" KERN_WARNING "Count:0x%x\n"
@@ -1630,12 +1630,13 @@if (WaitTillCardIsFree (base)) goto errrelfw; -if ((status =inw (base +0x4 )) !=0 ) { + status =inw (base +0x4 ); +if (status !=0 ) {dev_err (&pdev->dev,"Card%d got out of sync.Card " "Status:0x%x\n" , index +1 , status); goto errrelfw; } - } + }/* XXX: should we test it by reading it back and comparing with original like * in load firmware package? */
@@ -1659,7 +1660,8 @@if (WaitTillCardIsFree (base)) goto errrelfw; -if ((status =inw (base +0x4 )) !=0 ) { + status =inw (base +0x4 ); +if (status !=0 ) {dev_warn (&pdev->dev,"Card%d rejected verify header:\n" KERN_WARNING "Address:0x%x\n" KERN_WARNING "Count:0x%x\n"
@@ -1692,7 +1694,8 @@if (WaitTillCardIsFree (base)) goto errrelfw; -if ((status =inw (base +0x4 )) !=0 ) { + status =inw (base +0x4 ); +if (status !=0 ) {dev_err (&pdev->dev,"Card%d verify got out of sync. " "Card Status:0x%x\n" , index +1 , status); goto errrelfw;
@@ -1757,7 +1760,7 @@ index + 1); retval = -EBUSY ; goto errdec; - } + } retval =request_irq (board->irq, isicom_interrupt,IRQF_SHARED |IRQF_DISABLED ,ISICOM_NAME , board);
@@ -1811,7 +1814,7 @@int retval, idx, channel;struct isi_port *port; -for (idx =0 ; idx <BOARD_COUNT ; idx++) { +for (idx =0 ; idx <BOARD_COUNT ; idx++) { port = &isi_ports[idx *16 ]; isi_card[idx].ports = port;spin_lock_init (&isi_card[idx].card_lock);
@@ -1825,7 +1828,7 @@init_waitqueue_head (&port->open_wait);init_waitqueue_head (&port->close_wait);/* . . . */ - } + } isi_card[idx].base =0 ; isi_card[idx].irq =0 ; }