Skip to contentSkip to conversation

Phytec Phycore-i.MX31 support

PATCH New Guennadi Liakhovetski 2 participants 2 messages Mar 26, 2008 – Apr 13, 2008

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 6/7 Phytec Phycore-i.MX31 support

From: Sascha Hauer <[email protected]>

This patch adds support for the Phytec Phycore-i.MX31 board

---

Changes since v1: removed C++ style comments, disabled CONFIG_FIT, fixed CONFIG_CMD_* macros

 MAKEALL                                           |    1 +
 Makefile                                          |    3 +
 board/imx31_phycore/Makefile                      |   51 ++++++
 board/{imx31_litekit => imx31_phycore}/config.mk  |    0 
 board/imx31_phycore/imx31_phycore.c               |   74 +++++++++
 board/imx31_phycore/lowlevel_init.S               |  104 ++++++++++++
 board/{imx31_litekit => imx31_phycore}/u-boot.lds |    0 
 include/configs/imx31_phycore.h                   |  178 +++++++++++++++++++++
 8 files changed, 411 insertions(+), 0 deletions(-)
 create mode 100644 board/imx31_phycore/Makefile
 copy board/{imx31_litekit => imx31_phycore}/config.mk (100%)
 create mode 100644 board/imx31_phycore/imx31_phycore.c
 create mode 100644 board/imx31_phycore/lowlevel_init.S
 copy board/{imx31_litekit => imx31_phycore}/u-boot.lds (100%)
 create mode 100644 include/configs/imx31_phycore.h
MAKEALL +1 -0
index 5bc2a12..0ca866f 100755
@@ -503,6 +503,7 @@ LIST_ARM11="		\
 	omap2420h4	\
 	apollon		\
 	imx31_litekit	\
+	imx31_phycore	\
 "
 
 #########################################################################
Makefile +3 -0
index 62306a4..b3cbb20 100644
@@ -2598,6 +2598,9 @@ apollon_config		: unconfig
 imx31_litekit_config	: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
 
+imx31_phycore_config	: unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
+
 #========================================================================
 # i386
 #========================================================================
board/imx31_phycore/Makefile new file +51 -0

51 lines not on this page · raw message

board/imx31_phycore/config.mk renamed from board/imx31_litekit/config.mk +0 -0
similarity index 100%
copy from board/imx31_litekit/config.mk
copy to board/imx31_phycore/config.mk
board/imx31_phycore/imx31_phycore.c new file +74 -0

74 lines not on this page · raw message

board/imx31_phycore/lowlevel_init.S new file +104 -0

104 lines not on this page · raw message

board/imx31_phycore/u-boot.lds renamed from board/imx31_litekit/u-boot.lds +0 -0
similarity index 100%
copy from board/imx31_litekit/u-boot.lds
copy to board/imx31_phycore/u-boot.lds
include/configs/imx31_phycore.h new file +180 -0

180 lines not on this page · raw message

Signature · 1 line
1.5.4
#1 lore raw

PATCH v2 6/7 Phytec Phycore-i.MX31 support

Quoted 6 lines · In message <[email protected]> you wrote:

From: Sascha Hauer <[email protected]>

This patch adds support for the Phytec Phycore-i.MX31 board

Pulled in directly, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Of all possible committee reactions to any  given  agenda  item,  the
reaction  that will occur is the one which will liberate the greatest
amount of hot air.                                -- Thomas L. Martin