gfs2/include: Remove unused list.h file

deleted file mode 100644
index 566b377..0000000
@@ -1,325 +0,0 @@
-/* Copied from include/linux/list.h */
-
-#ifndef _LINUX_LIST_H
-#define _LINUX_LIST_H
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr:        the pointer to the member.
- * @type:       the type of the container struct this is embedded in.
- * @member:     the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({                      \
-	const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
-	(type *)( (char *)__mptr - offsetof(type,member) );})
-
-
-/*
- * These are non-NULL pointers that will result in page faults
- * under normal circumstances, used to verify that nobody uses
- * non-initialized list entries.
- */
-#define LIST_POISON1  ((void *) 0x00100100)
-#define LIST_POISON2  ((void *) 0x00200200)
-
-/*
- * Simple doubly linked list implementation.
- *
- * Some of the internal functions ("__xxx") are useful when
- * manipulating whole lists rather than single entries, as
- * sometimes we already know the next/prev entries and we can
- * generate better code by using them directly rather than
- * using the generic single-entry routines.
- */
-
-struct list_head {
-	struct list_head *next, *prev;
-};
-
-#define LIST_HEAD_INIT(name) { &(name), &(name) }
-
-#define LIST_HEAD(name) \
-	struct list_head name = LIST_HEAD_INIT(name)
-
-#define INIT_LIST_HEAD(ptr) do { \
-	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
-} while (0)
-
-/*
- * Insert a new entry between two known consecutive entries. 
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_add(struct list_head *new,
-			      struct list_head *prev,
-			      struct list_head *next)
-{
-	next->prev = new;
-	new->next = next;
-	new->prev = prev;
-	prev->next = new;
-}
-
-/**
- * list_add - add a new entry
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- */
-static inline void list_add(struct list_head *new, struct list_head *head)
-{
-	__list_add(new, head, head->next);
-}
-
-/**
- * list_add_tail - add a new entry
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- */
-static inline void list_add_tail(struct list_head *new, struct list_head *head)
-{
-	__list_add(new, head->prev, head);
-}
-
-/*
- * Delete a list entry by making the prev/next entries
- * point to each other.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_del(struct list_head * prev, struct list_head * next)
-{
-	next->prev = prev;
-	prev->next = next;
-}
-
-/**
- * list_del - deletes entry from list.
- * @entry: the element to delete from the list.
- * Note: list_empty on entry does not return true after this, the entry is
- * in an undefined state.
- */
-static inline void list_del(struct list_head *entry)
-{
-	__list_del(entry->prev, entry->next);
-	entry->next = LIST_POISON1;
-	entry->prev = LIST_POISON2;
-}
-
-/**
- * list_del_init - deletes entry from list and reinitialize it.
- * @entry: the element to delete from the list.
- */
-static inline void list_del_init(struct list_head *entry)
-{
-	__list_del(entry->prev, entry->next);
-	INIT_LIST_HEAD(entry); 
-}
-
-/**
- * list_move - delete from one list and add as another's head
- * @list: the entry to move
- * @head: the head that will precede our entry
- */
-static inline void list_move(struct list_head *list, struct list_head *head)
-{
-        __list_del(list->prev, list->next);
-        list_add(list, head);
-}
-
-/**
- * list_move_tail - delete from one list and add as another's tail
- * @list: the entry to move
- * @head: the head that will follow our entry
- */
-static inline void list_move_tail(struct list_head *list,
-				  struct list_head *head)
-{
-        __list_del(list->prev, list->next);
-        list_add_tail(list, head);
-}
-
-/**
- * list_empty - tests whether a list is empty
- * @head: the list to test.
- */
-static inline int list_empty(const struct list_head *head)
-{
-	return head->next == head;
-}
-
-/**
- * list_empty_careful - tests whether a list is
- * empty _and_ checks that no other CPU might be
- * in the process of still modifying either member
- *
- * NOTE: using list_empty_careful() without synchronization
- * can only be safe if the only activity that can happen
- * to the list entry is list_del_init(). Eg. it cannot be used
- * if another CPU could re-list_add() it.
- *
- * @head: the list to test.
- */
-static inline int list_empty_careful(const struct list_head *head)
-{
-	struct list_head *next = head->next;
-	return (next == head) && (next == head->prev);
-}
-
-static inline void __list_splice(struct list_head *list,
-				 struct list_head *head)
-{
-	struct list_head *first = list->next;
-	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
-
-	first->prev = head;
-	head->next = first;
-
-	last->next = at;
-	at->prev = last;
-}
-
-/**
- * list_splice - join two lists
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- */
-static inline void list_splice(struct list_head *list, struct list_head *head)
-{
-	if (!list_empty(list))
-		__list_splice(list, head);
-}
-
-/**
- * list_splice_init - join two lists and reinitialise the emptied list.
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- *
- * The list at @list is reinitialised
- */
-static inline void list_splice_init(struct list_head *list,
-				    struct list_head *head)
-{
-	if (!list_empty(list)) {
-		__list_splice(list, head);
-		INIT_LIST_HEAD(list);
-	}
-}
-
-/**
- * list_entry - get the struct for this entry
- * @ptr:	the &struct list_head pointer.
- * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_entry(ptr, type, member) \
-	container_of(ptr, type, member)
-
-/**
- * list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
- * @head:	the head for your list.
- */
-#define list_for_each(pos, head) \
-	for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * __list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
- * @head:	the head for your list.
- *
- * This variant differs from list_for_each() in that it's the
- * simplest possible list iteration code, no prefetching is done.
- * Use this for code that knows the list to be very short (empty
- * or 1 entry) most of the time.
- */
-#define __list_for_each(pos, head) \
-	for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * list_for_each_prev	-	iterate over a list backwards
- * @pos:	the &struct list_head to use as a loop counter.
- * @head:	the head for your list.
- */
-#define list_for_each_prev(pos, head) \
-	for (pos = (head)->prev; pos != (head); pos = pos->prev)
-        	
-/**
- * list_for_each_safe	-	iterate over a list safe against removal of list entry
- * @pos:	the &struct list_head to use as a loop counter.
- * @n:		another &struct list_head to use as temporary storage
- * @head:	the head for your list.
- */
-#define list_for_each_safe(pos, n, head) \
-	for (pos = (head)->next, n = pos->next; pos != (head); \
-		pos = n, n = pos->next)
-
-/**
- * list_for_each_entry	-	iterate over list of given type
- * @pos:	the type * to use as a loop counter.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry(pos, head, member)				\
-	for (pos = list_entry((head)->next, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
-	     pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos:	the type * to use as a loop counter.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry_reverse(pos, head, member)			\
-	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
-	     pos = list_entry(pos->member.prev, typeof(*pos), member))
-
-/**
- * list_prepare_entry - prepare a pos entry for use as a start point in
- *			list_for_each_entry_continue
- * @pos:	the type * to use as a start point
- * @head:	the head of the list
- * @member:	the name of the list_struct within the struct.
- */
-#define list_prepare_entry(pos, head, member) \
-	((pos) ? : list_entry(head, typeof(*pos), member))
-
-/**
- * list_for_each_entry_continue -	iterate over list of given type
- *			continuing after existing point
- * @pos:	the type * to use as a loop counter.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry_continue(pos, head, member) 		\
-	for (pos = list_entry(pos->member.next, typeof(*pos), member);  \
-	     &pos->member != (head);					\
-	     pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos:	the type * to use as a loop counter.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry_safe(pos, n, head, member)			\
-	for (pos = list_entry((head)->next, typeof(*pos), member),	\
-		n = list_entry(pos->member.next, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
-	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-
-#endif