Skip to contentSkip to conversation

does pata_marvell (88SE6145 driver) support external SATA port?

DISCUSSION David Madore 2 participants 2 messages Apr 17, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

I have an Asus P5W64 WS motherboard, featuring a Marvell 88SE6145 ATA controller, with three internal SATA ports and one external e-SATA port. I understand the Linux kernel driver for this controller is called pata_marvell even though it's a SATA controller (/me confused, but I think it says something like the controller is used in "legacy" mode, whatever that means); I also understand that this driver will not drive the third internal SATA port (reported on, e.g., <URL:
http://ubuntuforums.org/archive/index.php/t-507061.html

Quoted 1 line

): this is coherent with Alan Cox's comment when signing of the

driver (<URL: http://lkml.org/lkml/2006/10/16/157 >) that the driver will "drive the SATA ports 1 & 2 in legacy mode". However, no mention was made of the external SATA port.

So:

Does the pata_marvell module support an external SATA port?

How can I know this without buying an external SATA drive and discovering to my dismay that I can't use it? :-)

Cheers,

Signature · 3 lines
     David A. Madore
    ([email protected],
     http://www.madore.org/~david/ )
#1 lore raw
Quoted 1 line

Does the pata_marvell module support an external SATA port?

pata_marvell supports the PATA port on some Marvell devices. The SATA side is supported by other drivers depending on the chip.

Quoted 2 lines

How can I know this without buying an external SATA drive and discovering to my dismay that I can't use it? :-)

Software side most ESATA looks identical to SATA but some cheap stuff just puts internal SATA on an ESATA connector Be wary of that.

Alan