mac80211: Replace ieee80211_tx_control->key_idx with ieee80211_key_conf
Subsystems (2)
PATCH 1/1 mac80211: Replace ieee80211_tx_control->key_idx with ieee80211_key_conf
The hw_key_idx inside the ieee80211_key_conf structure does not provide all the information drivers might need to perform hardware encryption.
This is in particular true for rt2x00 who needs to know the key algorithm and whether it is a shared or pairwise key.
By passing the ieee80211_key_conf pointer it assures us that drivers can make full use of all information that it should know about a particular key.
Additionally this patch updates all drivers to grab the hw_key_idx from the ieee80211_key_conf structure.
---
drivers/net/wireless/ath5k/base.c +1 -1
@@ -1323,7 +1323,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, pktlen = skb->len;if (!(ctl->flags &IEEE80211_TXCTL_DO_NOT_ENCRYPT )) { - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx; pktlen += ctl->icv_len; }
drivers/net/wireless/b43/xmit.c +1 -1
@@ -235,7 +235,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16) (txctl->key_idx); +u8 key_idx = (u16) (txctl->hw_key->hw_key_idx);struct b43_key *key;int wlhdr_len;size_t iv_len;
drivers/net/wireless/b43legacy/xmit.c +1 -1
@@ -232,7 +232,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16)(txctl->key_idx); +u8 key_idx = (u16)(txctl->hw_key->hw_key_idx);struct b43legacy_key *key;int wlhdr_len;size_t iv_len;
drivers/net/wireless/iwlwifi/iwl3945-base.c +4 -3
@@ -2391,7 +2391,8 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, struct sk_buff *skb_frag, int last_frag) { -struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo; +struct iwl3945_hw_key *keyinfo = + &priv->stations[ctl->hw_key->hw_key_idx].keyinfo;switch (keyinfo->alg) {case ALG_CCMP :
@@ -2414,7 +2415,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,case ALG_WEP : cmd->cmd.tx.sec_ctl =TX_CMD_SEC_WEP | - (ctl->key_idx &TX_CMD_SEC_MSK ) <<TX_CMD_SEC_SHIFT ; + (ctl->hw_key->hw_key_idx &TX_CMD_SEC_MSK ) <<TX_CMD_SEC_SHIFT ;if (keyinfo->keylen ==13 ) cmd->cmd.tx.sec_ctl |=TX_CMD_SEC_KEY128 ;
@@ -2422,7 +2423,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,memcpy (&cmd->cmd.tx.key[3 ], keyinfo->key, keyinfo->keylen);IWL_DEBUG_TX ("Configuring packet for WEP encryption " -"with key %d\n" , ctl->key_idx); +"with key %d\n" , ctl->hw_key->hw_key_idx);break ;default :
drivers/net/wireless/iwlwifi/iwl4965-base.c +3 -3
@@ -1936,7 +1936,7 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,struct iwl_wep_key *wepkey;int keyidx =0 ; -BUG_ON (ctl->key_idx >3 ); +BUG_ON (ctl->hw_key->hw_key_idx >3 );switch (keyinfo->alg) {case ALG_CCMP :
@@ -1955,11 +1955,11 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,break ;case ALG_WEP : - wepkey = &priv->wep_keys[ctl->key_idx]; + wepkey = &priv->wep_keys[ctl->hw_key->hw_key_idx]; cmd->cmd.tx.sec_ctl =0 ;if (priv->default_wep_key) {/* the WEP key was sent as static */ - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx;memcpy (&cmd->cmd.tx.key[3 ], wepkey->key, wepkey->key_size);if (wepkey->key_size ==WEP_KEY_LEN_128 )
include/net/mac80211.h +4 -2
@@ -298,9 +298,11 @@ struct ieee80211_tx_control {/* retry rate for the last retries */ struct ieee80211_rate *alt_retry_rate; +/* Key used for hardware encryption +* undefined if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ +struct ieee80211_key_conf *hw_key; +u32 flags;/* tx control flags defined above */ -u8 key_idx;/* keyidx from hw->set_key(), undefined if -* IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ u8 retry_limit;/* 1 = only first attempt, 2 = one retry, .. * This could be used when set_retry_limit * is not implemented by the driver */
net/mac80211/wep.c +1 -1
@@ -337,7 +337,7 @@ static int wep_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)if (ieee80211_wep_encrypt (tx->local, skb, tx->key))return -1 ; }else { - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;if (tx->key->conf.flags &IEEE80211_KEY_FLAG_GENERATE_IV ) {if (!ieee80211_wep_add_iv (tx->local, skb, tx->key))return -1 ;
net/mac80211/wpa.c +4 -4
@@ -228,7 +228,7 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, 0x7f), (u8) key->u.tkip.iv16); - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return 0 ; }
@@ -256,7 +256,7 @@ ieee80211_crypto_tkip_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) && !wpa_test) {/* hwaccel - with no need for preallocated room for IV/ICV */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return TX_CONTINUE ; }
@@ -478,7 +478,7 @@ static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx,if (key->flags &KEY_FLAG_UPLOADED_TO_HARDWARE ) {/* hwaccel - with preallocated room for CCMP header */ - tx->control->key_idx = key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return 0 ; }
@@ -505,7 +505,7 @@ ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {/* hwaccel - with no need for preallocated room for CCMP " * header or MIC fields */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return TX_CONTINUE ; }
drivers/net/wireless/b43/xmit.c int b43_generate_txhdr(struct b43_wldev *dev, · line 238
Quoted 10 lines · On Thursday 17 April 2008 17:28:29 Ivo van Doorn wrote:
drivers/net/wireless/b43/xmit.c +1
-1@@ -235,7 +235,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16) (txctl->key_idx); +u8 key_idx = (u16) (txctl->hw_key->hw_key_idx);
Can we actually remove that bogus cast while we are at it? :)
drivers/net/wireless/b43legacy/xmit.c static int generate_txhdr_fw3(struct b43legacy_wldev *dev, · line 235
Quoted 13 lines
drivers/net/wireless/b43/xmit.c +0
-0struct b43_key *key;int wlhdr_len;size_t iv_len;drivers/net/wireless/b43legacy/xmit.c +1
-1@@ -232,7 +232,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16)(txctl->key_idx); +u8 key_idx = (u16)(txctl->hw_key->hw_key_idx);
Same here.
Signature · 1 line
Greetings Michael.
Quoted 23 lines · Michael Buesch
drivers/net/wireless/b43/xmit.c int b43_generate_txhdr(struct b43_wldev *dev, · line 238
Quoted 10 lines · On Thursday 17 April 2008 17:28:29 Ivo van Doorn wrote:
drivers/net/wireless/b43/xmit.c +1
-1@@ -235,7 +235,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16) (txctl->key_idx); +u8 key_idx = (u16) (txctl->hw_key->hw_key_idx);Can we actually remove that bogus cast while we are at it? :)
Quoted 9 lines
drivers/net/wireless/b43/xmit.c +0
-0struct b43_key *key;int wlhdr_len;size_t iv_len;drivers/net/wireless/b43legacy/xmit.c +0
-0@@ -232,7 +232,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
Quoted 6 lines
drivers/net/wireless/b43legacy/xmit.c static int generate_txhdr_fw3(struct b43legacy_wldev *dev, · line 235
Quoted 4 lines
drivers/net/wireless/b43legacy/xmit.c +1
-1plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16)(txctl->key_idx); +u8 key_idx = (u16)(txctl->hw_key->hw_key_idx);Same here.
Sure, updated patch on its way. :)
Ivo
PATCH v2 1/1 mac80211: Replace ieee80211_tx_control->key_idx with ieee80211_key_conf
In reply to Ivo van DoornThe hw_key_idx inside the ieee80211_key_conf structure does not provide all the information drivers might need to perform hardware encryption.
This is in particular true for rt2x00 who needs to know the key algorithm and whether it is a shared or pairwise key.
By passing the ieee80211_key_conf pointer it assures us that drivers can make full use of all information that it should know about a particular key.
Additionally this patch updates all drivers to grab the hw_key_idx from the ieee80211_key_conf structure.
v2: Removed bogus u16 cast
---
drivers/net/wireless/ath5k/base.c +1 -1
@@ -1323,7 +1323,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, pktlen = skb->len;if (!(ctl->flags &IEEE80211_TXCTL_DO_NOT_ENCRYPT )) { - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx; pktlen += ctl->icv_len; }
drivers/net/wireless/b43/xmit.c +1 -1
@@ -235,7 +235,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16) (txctl->key_idx); +u8 key_idx = txctl->hw_key->hw_key_idx;struct b43_key *key;int wlhdr_len;size_t iv_len;
drivers/net/wireless/b43legacy/xmit.c +1 -1
@@ -232,7 +232,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16)(txctl->key_idx); +u8 key_idx = txctl->hw_key->hw_key_idx;struct b43legacy_key *key;int wlhdr_len;size_t iv_len;
drivers/net/wireless/iwlwifi/iwl3945-base.c +4 -3
@@ -2391,7 +2391,8 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, struct sk_buff *skb_frag, int last_frag) { -struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo; +struct iwl3945_hw_key *keyinfo = + &priv->stations[ctl->hw_key->hw_key_idx].keyinfo;switch (keyinfo->alg) {case ALG_CCMP :
@@ -2414,7 +2415,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,case ALG_WEP : cmd->cmd.tx.sec_ctl =TX_CMD_SEC_WEP | - (ctl->key_idx &TX_CMD_SEC_MSK ) <<TX_CMD_SEC_SHIFT ; + (ctl->hw_key->hw_key_idx &TX_CMD_SEC_MSK ) <<TX_CMD_SEC_SHIFT ;if (keyinfo->keylen ==13 ) cmd->cmd.tx.sec_ctl |=TX_CMD_SEC_KEY128 ;
@@ -2422,7 +2423,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,memcpy (&cmd->cmd.tx.key[3 ], keyinfo->key, keyinfo->keylen);IWL_DEBUG_TX ("Configuring packet for WEP encryption " -"with key %d\n" , ctl->key_idx); +"with key %d\n" , ctl->hw_key->hw_key_idx);break ;default :
drivers/net/wireless/iwlwifi/iwl4965-base.c +3 -3
@@ -1936,7 +1936,7 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,struct iwl_wep_key *wepkey;int keyidx =0 ; -BUG_ON (ctl->key_idx >3 ); +BUG_ON (ctl->hw_key->hw_key_idx >3 );switch (keyinfo->alg) {case ALG_CCMP :
@@ -1955,11 +1955,11 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,break ;case ALG_WEP : - wepkey = &priv->wep_keys[ctl->key_idx]; + wepkey = &priv->wep_keys[ctl->hw_key->hw_key_idx]; cmd->cmd.tx.sec_ctl =0 ;if (priv->default_wep_key) {/* the WEP key was sent as static */ - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx;memcpy (&cmd->cmd.tx.key[3 ], wepkey->key, wepkey->key_size);if (wepkey->key_size ==WEP_KEY_LEN_128 )
include/net/mac80211.h +4 -2
@@ -298,9 +298,11 @@ struct ieee80211_tx_control {/* retry rate for the last retries */ struct ieee80211_rate *alt_retry_rate; +/* Key used for hardware encryption +* undefined if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ +struct ieee80211_key_conf *hw_key; +u32 flags;/* tx control flags defined above */ -u8 key_idx;/* keyidx from hw->set_key(), undefined if -* IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ u8 retry_limit;/* 1 = only first attempt, 2 = one retry, .. * This could be used when set_retry_limit * is not implemented by the driver */
net/mac80211/wep.c +1 -1
@@ -337,7 +337,7 @@ static int wep_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)if (ieee80211_wep_encrypt (tx->local, skb, tx->key))return -1 ; }else { - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;if (tx->key->conf.flags &IEEE80211_KEY_FLAG_GENERATE_IV ) {if (!ieee80211_wep_add_iv (tx->local, skb, tx->key))return -1 ;
net/mac80211/wpa.c +4 -4
@@ -228,7 +228,7 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, 0x7f), (u8) key->u.tkip.iv16); - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return 0 ; }
@@ -256,7 +256,7 @@ ieee80211_crypto_tkip_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) && !wpa_test) {/* hwaccel - with no need for preallocated room for IV/ICV */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return TX_CONTINUE ; }
@@ -478,7 +478,7 @@ static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx,if (key->flags &KEY_FLAG_UPLOADED_TO_HARDWARE ) {/* hwaccel - with preallocated room for CCMP header */ - tx->control->key_idx = key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return 0 ; }
@@ -505,7 +505,7 @@ ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {/* hwaccel - with no need for preallocated room for CCMP " * header or MIC fields */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return TX_CONTINUE ; }
Johannes Berg
maintainerinclude/net/mac80211.h struct ieee80211_tx_control { · line 303
Quoted 4 lines
include/net/mac80211.h +3
-0+/* Key used for hardware encryption +* undefined if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ +struct ieee80211_key_conf *hw_key;
I would prefer "NULL if <flag> is set". And we could possibly do some internal rework to get rid of the flag now (don't do that right now unless you think it's easy, I'm not too sure off-hand). Can you also add a comment about what I said wrt. accessing it inside ops->tx() only? Sorry about the mail crossing.
johannes
PATCH v3 1/1 mac80211: Replace ieee80211_tx_control->key_idx with ieee80211_key_conf
In reply to Ivo van DoornThe hw_key_idx inside the ieee80211_key_conf structure does not provide all the information drivers might need to perform hardware encryption.
This is in particular true for rt2x00 who needs to know the key algorithm and whether it is a shared or pairwise key.
By passing the ieee80211_key_conf pointer it assures us that drivers can make full use of all information that it should know about a particular key.
Additionally this patch updates all drivers to grab the hw_key_idx from the ieee80211_key_conf structure.
v2: Removed bogus u16 cast
v3: Add warning about ieee80211_tx_control pointers
---
drivers/net/wireless/ath5k/base.c +1 -1
@@ -1323,7 +1323,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, pktlen = skb->len;if (!(ctl->flags &IEEE80211_TXCTL_DO_NOT_ENCRYPT )) { - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx; pktlen += ctl->icv_len; }
drivers/net/wireless/b43/xmit.c +1 -1
@@ -235,7 +235,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16) (txctl->key_idx); +u8 key_idx = txctl->hw_key->hw_key_idx;struct b43_key *key;int wlhdr_len;size_t iv_len;
drivers/net/wireless/b43legacy/xmit.c +1 -1
@@ -232,7 +232,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16)(txctl->key_idx); +u8 key_idx = txctl->hw_key->hw_key_idx;struct b43legacy_key *key;int wlhdr_len;size_t iv_len;
drivers/net/wireless/iwlwifi/iwl3945-base.c +4 -3
@@ -2391,7 +2391,8 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, struct sk_buff *skb_frag, int last_frag) { -struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo; +struct iwl3945_hw_key *keyinfo = + &priv->stations[ctl->hw_key->hw_key_idx].keyinfo;switch (keyinfo->alg) {case ALG_CCMP :
@@ -2414,7 +2415,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,case ALG_WEP : cmd->cmd.tx.sec_ctl =TX_CMD_SEC_WEP | - (ctl->key_idx &TX_CMD_SEC_MSK ) <<TX_CMD_SEC_SHIFT ; + (ctl->hw_key->hw_key_idx &TX_CMD_SEC_MSK ) <<TX_CMD_SEC_SHIFT ;if (keyinfo->keylen ==13 ) cmd->cmd.tx.sec_ctl |=TX_CMD_SEC_KEY128 ;
@@ -2422,7 +2423,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,memcpy (&cmd->cmd.tx.key[3 ], keyinfo->key, keyinfo->keylen);IWL_DEBUG_TX ("Configuring packet for WEP encryption " -"with key %d\n" , ctl->key_idx); +"with key %d\n" , ctl->hw_key->hw_key_idx);break ;default :
drivers/net/wireless/iwlwifi/iwl4965-base.c +3 -3
@@ -1936,7 +1936,7 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,struct iwl_wep_key *wepkey;int keyidx =0 ; -BUG_ON (ctl->key_idx >3 ); +BUG_ON (ctl->hw_key->hw_key_idx >3 );switch (keyinfo->alg) {case ALG_CCMP :
@@ -1955,11 +1955,11 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,break ;case ALG_WEP : - wepkey = &priv->wep_keys[ctl->key_idx]; + wepkey = &priv->wep_keys[ctl->hw_key->hw_key_idx]; cmd->cmd.tx.sec_ctl =0 ;if (priv->default_wep_key) {/* the WEP key was sent as static */ - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx;memcpy (&cmd->cmd.tx.key[3 ], wepkey->key, wepkey->key_size);if (wepkey->key_size ==WEP_KEY_LEN_128 )
include/net/mac80211.h +11 -4
@@ -286,8 +286,13 @@ enum mac80211_tx_control_flags {/* Transmit control fields. This data structure is passed to low-level driver * with each TX frame. The low-level driver is responsible for configuring -* the hardware to use given values (depending on what is supported). */ - +* the hardware to use given values (depending on what is supported). +* +* NOTE: All pointers within this structure are only valid until +* ieee80211_ops->tx() returns. If the information is required +* at a later time (i.e. when defering the work to a workqueue) +* make sure that not only the contents of struct ieee80211_tx_control +* is copied, but also the data where the pointers refer to. */ struct ieee80211_tx_control {struct ieee80211_vif *vif;struct ieee80211_rate *tx_rate;
@@ -298,9 +303,11 @@ struct ieee80211_tx_control {/* retry rate for the last retries */ struct ieee80211_rate *alt_retry_rate; +/* Key used for hardware encryption +* NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ +struct ieee80211_key_conf *hw_key; +u32 flags;/* tx control flags defined above */ -u8 key_idx;/* keyidx from hw->set_key(), undefined if -* IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ u8 retry_limit;/* 1 = only first attempt, 2 = one retry, .. * This could be used when set_retry_limit * is not implemented by the driver */
net/mac80211/wep.c +1 -1
@@ -337,7 +337,7 @@ static int wep_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)if (ieee80211_wep_encrypt (tx->local, skb, tx->key))return -1 ; }else { - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;if (tx->key->conf.flags &IEEE80211_KEY_FLAG_GENERATE_IV ) {if (!ieee80211_wep_add_iv (tx->local, skb, tx->key))return -1 ;
net/mac80211/wpa.c +4 -4
@@ -228,7 +228,7 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, 0x7f), (u8) key->u.tkip.iv16); - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return 0 ; }
@@ -256,7 +256,7 @@ ieee80211_crypto_tkip_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) && !wpa_test) {/* hwaccel - with no need for preallocated room for IV/ICV */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return TX_CONTINUE ; }
@@ -478,7 +478,7 @@ static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx,if (key->flags &KEY_FLAG_UPLOADED_TO_HARDWARE ) {/* hwaccel - with preallocated room for CCMP header */ - tx->control->key_idx = key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return 0 ; }
@@ -505,7 +505,7 @@ ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {/* hwaccel - with no need for preallocated room for CCMP " * header or MIC fields */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return TX_CONTINUE ; }
Hi,
I hate to do this, but
Quoted 11 lines
/* Transmit control fields. This data structure is passed to low-level driver
* with each TX frame. The low-level driver is responsible for configuring
- * the hardware to use given values (depending on what is supported). */ -
+ * the hardware to use given values (depending on what is supported).
+ *
+ * NOTE: All pointers within this structure are only valid until
+ *ieee80211_ops->tx()returns. If the information is required
+ * at a later time (i.e. when defering the work to a workqueue)
+ * make sure that not only the contents of structieee80211_tx_control
+ * is copied, but also the data where the pointers refer to. */
This isn't true for all pointers, the rate pointers point into the array rate array so they're valid until the phy is unregistered, the vif pointer is valid until the interface is removed via the appropriate callback (remove_interface? I forgot), and the key until that is removed via set_key().
Maybe we should add that instead? Normally, people will not need the pointers outside ->tx() though, of course.
Also, please move the */ to a new line while you're at it anyway.
Other than that,
johannes
PATCH v4 1/1 mac80211: Replace ieee80211_tx_control->key_idx with ieee80211_key_conf
In reply to Ivo van DoornThe hw_key_idx inside the ieee80211_key_conf structure does not provide all the information drivers might need to perform hardware encryption.
This is in particular true for rt2x00 who needs to know the key algorithm and whether it is a shared or pairwise key.
By passing the ieee80211_key_conf pointer it assures us that drivers can make full use of all information that it should know about a particular key.
Additionally this patch updates all drivers to grab the hw_key_idx from the ieee80211_key_conf structure.
v2: Removed bogus u16 cast
v3: Add warning about ieee80211_tx_control pointers
v4: Update warning about ieee80211_tx_control pointers
---
drivers/net/wireless/ath5k/base.c +1 -1
@@ -1323,7 +1323,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, pktlen = skb->len;if (!(ctl->flags &IEEE80211_TXCTL_DO_NOT_ENCRYPT )) { - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx; pktlen += ctl->icv_len; }
drivers/net/wireless/b43/xmit.c +1 -1
@@ -235,7 +235,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16) (txctl->key_idx); +u8 key_idx = txctl->hw_key->hw_key_idx;struct b43_key *key;int wlhdr_len;size_t iv_len;
drivers/net/wireless/b43legacy/xmit.c +1 -1
@@ -232,7 +232,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, plcp_fragment_len = fragment_len +FCS_LEN ;if (use_encryption) { -u8 key_idx = (u16)(txctl->key_idx); +u8 key_idx = txctl->hw_key->hw_key_idx;struct b43legacy_key *key;int wlhdr_len;size_t iv_len;
drivers/net/wireless/iwlwifi/iwl3945-base.c +4 -3
@@ -2391,7 +2391,8 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv, struct sk_buff *skb_frag, int last_frag) { -struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo; +struct iwl3945_hw_key *keyinfo = + &priv->stations[ctl->hw_key->hw_key_idx].keyinfo;switch (keyinfo->alg) {case ALG_CCMP :
@@ -2414,7 +2415,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,case ALG_WEP : cmd->cmd.tx.sec_ctl =TX_CMD_SEC_WEP | - (ctl->key_idx &TX_CMD_SEC_MSK ) <<TX_CMD_SEC_SHIFT ; + (ctl->hw_key->hw_key_idx &TX_CMD_SEC_MSK ) <<TX_CMD_SEC_SHIFT ;if (keyinfo->keylen ==13 ) cmd->cmd.tx.sec_ctl |=TX_CMD_SEC_KEY128 ;
@@ -2422,7 +2423,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,memcpy (&cmd->cmd.tx.key[3 ], keyinfo->key, keyinfo->keylen);IWL_DEBUG_TX ("Configuring packet for WEP encryption " -"with key %d\n" , ctl->key_idx); +"with key %d\n" , ctl->hw_key->hw_key_idx);break ;default :
drivers/net/wireless/iwlwifi/iwl4965-base.c +3 -3
@@ -1936,7 +1936,7 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,struct iwl_wep_key *wepkey;int keyidx =0 ; -BUG_ON (ctl->key_idx >3 ); +BUG_ON (ctl->hw_key->hw_key_idx >3 );switch (keyinfo->alg) {case ALG_CCMP :
@@ -1955,11 +1955,11 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,break ;case ALG_WEP : - wepkey = &priv->wep_keys[ctl->key_idx]; + wepkey = &priv->wep_keys[ctl->hw_key->hw_key_idx]; cmd->cmd.tx.sec_ctl =0 ;if (priv->default_wep_key) {/* the WEP key was sent as static */ - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx;memcpy (&cmd->cmd.tx.key[3 ], wepkey->key, wepkey->key_size);if (wepkey->key_size ==WEP_KEY_LEN_128 )
include/net/mac80211.h +15 -4
@@ -286,8 +286,17 @@ enum mac80211_tx_control_flags {/* Transmit control fields. This data structure is passed to low-level driver * with each TX frame. The low-level driver is responsible for configuring -* the hardware to use given values (depending on what is supported). */ - +* the hardware to use given values (depending on what is supported). +* +* NOTE: Be careful with using the pointers outside of the ieee80211_ops->tx() +* context (i.e. when defering the work to a workqueue). +* The vif pointer is valid until the it has been removed with the +* ieee80211_ops->remove_interface() callback funtion. +* The hw_key pointer is valid until it has been removed with the +* ieee80211_ops->set_key() callback function. +* The tx_rate and alt_retry_rate pointers are valid until the phy is +* deregistered. +*/ struct ieee80211_tx_control {struct ieee80211_vif *vif;struct ieee80211_rate *tx_rate;
@@ -298,9 +307,11 @@ struct ieee80211_tx_control {/* retry rate for the last retries */ struct ieee80211_rate *alt_retry_rate; +/* Key used for hardware encryption +* NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ +struct ieee80211_key_conf *hw_key; +u32 flags;/* tx control flags defined above */ -u8 key_idx;/* keyidx from hw->set_key(), undefined if -* IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ u8 retry_limit;/* 1 = only first attempt, 2 = one retry, .. * This could be used when set_retry_limit * is not implemented by the driver */
net/mac80211/wep.c +1 -1
@@ -337,7 +337,7 @@ static int wep_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb)if (ieee80211_wep_encrypt (tx->local, skb, tx->key))return -1 ; }else { - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;if (tx->key->conf.flags &IEEE80211_KEY_FLAG_GENERATE_IV ) {if (!ieee80211_wep_add_iv (tx->local, skb, tx->key))return -1 ;
net/mac80211/wpa.c +4 -4
@@ -228,7 +228,7 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, 0x7f), (u8) key->u.tkip.iv16); - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return 0 ; }
@@ -256,7 +256,7 @@ ieee80211_crypto_tkip_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) && !wpa_test) {/* hwaccel - with no need for preallocated room for IV/ICV */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return TX_CONTINUE ; }
@@ -478,7 +478,7 @@ static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx,if (key->flags &KEY_FLAG_UPLOADED_TO_HARDWARE ) {/* hwaccel - with preallocated room for CCMP header */ - tx->control->key_idx = key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return 0 ; }
@@ -505,7 +505,7 @@ ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx) !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {/* hwaccel - with no need for preallocated room for CCMP " * header or MIC fields */ - tx->control->key_idx = tx->key->conf.hw_key_idx; + tx->control->hw_key = &tx->key->conf;return TX_CONTINUE ; }
Johannes Berg
maintainerQuoted 16 lines
drivers/net/wireless/iwlwifi/iwl4965-base.c +1
-1@@ -1936,7 +1936,7 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,struct iwl_wep_key *wepkey;int keyidx =0 ; -BUG_ON (ctl->key_idx >3 ); +BUG_ON (ctl->hw_key->hw_key_idx >3 );switch (keyinfo->alg) {case ALG_CCMP :@@ -1955,11 +1955,11 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,break ;case ALG_WEP :
drivers/net/wireless/iwlwifi/iwl4965-base.c static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv, · line 1965
Quoted 10 lines
drivers/net/wireless/iwlwifi/iwl4965-base.c +2
-2- wepkey = &priv->wep_keys[ctl->key_idx]; + wepkey = &priv->wep_keys[ctl->hw_key->hw_key_idx]; cmd->cmd.tx.sec_ctl =0 ;if (priv->default_wep_key) {/* the WEP key was sent as static */ - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx;memcpy (&cmd->cmd.tx.key[3 ], wepkey->key, wepkey->key_size);if (wepkey->key_size ==WEP_KEY_LEN_128 )
All this is rather odd. I think you (Intel) may want to change it to use hw_key->keyidx and just leave the hw_key_idx alone, it seems to be a copy of keyidx in iwl4965 but an actual index as it was meant to be used in iwl3945?
johannes
Quoted 29 lines · Johannes Berg
Quoted 16 lines
drivers/net/wireless/iwlwifi/iwl4965-base.c +1
-1@@ -1936,7 +1936,7 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,struct iwl_wep_key *wepkey;int keyidx =0 ; -BUG_ON (ctl->key_idx >3 ); +BUG_ON (ctl->hw_key->hw_key_idx >3 );switch (keyinfo->alg) {case ALG_CCMP :@@ -1955,11 +1955,11 @@ static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv,break ;case ALG_WEP :drivers/net/wireless/iwlwifi/iwl4965-base.c static void iwl4965_build_tx_cmd_hwcrypto(struct iwl_priv *priv, · line 1965
Quoted 10 lines
drivers/net/wireless/iwlwifi/iwl4965-base.c +2
-2- wepkey = &priv->wep_keys[ctl->key_idx]; + wepkey = &priv->wep_keys[ctl->hw_key->hw_key_idx]; cmd->cmd.tx.sec_ctl =0 ;if (priv->default_wep_key) {/* the WEP key was sent as static */ - keyidx = ctl->key_idx; + keyidx = ctl->hw_key->hw_key_idx;memcpy (&cmd->cmd.tx.key[3 ], wepkey->key, wepkey->key_size);if (wepkey->key_size ==WEP_KEY_LEN_128 )All this is rather odd. I think you (Intel) may want to change it to use
hw_key->keyidxand just leave thehw_key_idxalone, it seems to be a
Quoted 2 lines
copy of keyidx in iwl4965 but an actual index as it was meant to be usedin iwl3945?
Sure, this patch changes the picture., in addition the code can be a bit simplified.
Will fix that.
Thanks
Tomas