Input queue for 2.6.26 merge window

index 490918a..0d3ce7a 100644
@@ -73,7 +73,7 @@ static void input_polled_device_work(struct work_struct *work)
 
 static int input_open_polled_device(struct input_dev *input)
 {
-	struct input_polled_dev *dev = input->private;
+	struct input_polled_dev *dev = input_get_drvdata(input);
 	int error;
 
 	error = input_polldev_start_workqueue();

@@ -91,7 +91,7 @@ static int input_open_polled_device(struct input_dev *input)
 
 static void input_close_polled_device(struct input_dev *input)
 {
-	struct input_polled_dev *dev = input->private;
+	struct input_polled_dev *dev = input_get_drvdata(input);
 
 	cancel_delayed_work_sync(&dev->work);
 	input_polldev_stop_workqueue();

@@ -151,10 +151,10 @@ int input_register_polled_device(struct input_polled_dev *dev)
 {
 	struct input_dev *input = dev->input;
 
+	input_set_drvdata(input, dev);
 	INIT_DELAYED_WORK(&dev->work, input_polled_device_work);
 	if (!dev->poll_interval)
 		dev->poll_interval = 500;
-	input->private = dev;
 	input->open = input_open_polled_device;
 	input->close = input_close_polled_device;
 

index cae2c35..28a094f 100644
@@ -1025,10 +1025,6 @@ struct ff_effect {
  * @node: used to place the device onto input_dev_list
  */
 struct input_dev {
-	/* private: */
-	void *private;	/* do not use */
-	/* public: */
-
 	const char *name;
 	const char *phys;
 	const char *uniq;

@@ -1238,12 +1234,12 @@ static inline void input_put_device(struct input_dev *dev)
 
 static inline void *input_get_drvdata(struct input_dev *dev)
 {
-	return dev->private;
+	return dev_get_drvdata(&dev->dev);
 }
 
 static inline void input_set_drvdata(struct input_dev *dev, void *data)
 {
-	dev->private = data;
+	dev_set_drvdata(&dev->dev, data);
 }
 
 int __must_check input_register_device(struct input_dev *);

index 5a0ca18..9caed30 100644
@@ -1,14 +1,12 @@
 /*
- *  Copyright (c) 2005 John Lenz
+ * LoCoMo keyboard driver for Linux-based ARM PDAs:
+ * 	- SHARP Zaurus Collie (SL-5500)
+ * 	- SHARP Zaurus Poodle (SL-5600)
  *
+ * Copyright (c) 2005 John Lenz
  * Based on from xtkbd.c
- */
-
-/*
- * LoCoMo keyboard driver for Linux/ARM
- */
-
-/*
+ *
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or

@@ -47,7 +45,8 @@ MODULE_LICENSE("GPL");
 #define KEY_CONTACT		KEY_F18
 #define KEY_CENTER		KEY_F15
 
-static unsigned char locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
+static const unsigned char
+locomokbd_keycode[LOCOMOKBD_NUMKEYS] __devinitconst = {
 	0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0,				/* 0 - 9 */
 	0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT,			/* 10 - 19 */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0,						/* 20 - 29 */

@@ -67,22 +66,21 @@ static unsigned char locomokbd_keycode[LOCOMOKBD_NUMKEYS] = {
 #define KB_COLS			8
 #define KB_ROWMASK(r)		(1 << (r))
 #define SCANCODE(c,r)		( ((c)<<4) + (r) + 1 )
-#define	NR_SCANCODES		128
 
 #define KB_DELAY		8
 #define SCAN_INTERVAL		(HZ/10)
-#define LOCOMOKBD_PRESSED	1
 
 struct locomokbd {
 	unsigned char keycode[LOCOMOKBD_NUMKEYS];
 	struct input_dev *input;
 	char phys[32];
 
-	struct locomo_dev *ldev;
 	unsigned long base;
 	spinlock_t lock;
 
 	struct timer_list timer;
+	unsigned long suspend_jiffies;
+	unsigned int count_cancel;
 };
 
 /* helper functions for reading the keyboard matrix */

@@ -128,7 +126,7 @@ static inline void locomokbd_reset_col(unsigned long membase, int col)
 /* Scan the hardware keyboard and push any changes up through the input layer */
 static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
 {
-	unsigned int row, col, rowd, scancode;
+	unsigned int row, col, rowd;
 	unsigned long flags;
 	unsigned int num_pressed;
 	unsigned long membase = locomokbd->base;

@@ -145,13 +143,33 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
 
 		rowd = ~locomo_readl(membase + LOCOMO_KIB);
 		for (row = 0; row < KB_ROWS; row++) {
+			unsigned int scancode, pressed, key;
+
 			scancode = SCANCODE(col, row);
-			if (rowd & KB_ROWMASK(row)) {
-				num_pressed += 1;
-				input_report_key(locomokbd->input, locomokbd->keycode[scancode], 1);
-			} else {
-				input_report_key(locomokbd->input, locomokbd->keycode[scancode], 0);
-			}
+			pressed = rowd & KB_ROWMASK(row);
+			key = locomokbd->keycode[scancode];
+
+			input_report_key(locomokbd->input, key, pressed);
+			if (likely(!pressed))
+				continue;
+
+			num_pressed++;
+
+			/* The "Cancel/ESC" key is labeled "On/Off" on
+			 * Collie and Poodle and should suspend the device
+			 * if it was pressed for more than a second. */
+			if (unlikely(key == KEY_ESC)) {
+				if (!time_after(jiffies,
+					locomokbd->suspend_jiffies + HZ))
+					continue;
+				if (locomokbd->count_cancel++
+					!= (HZ/SCAN_INTERVAL + 1))
+					continue;
+				input_event(locomokbd->input, EV_PWR,
+					KEY_SUSPEND, 1);
+				locomokbd->suspend_jiffies = jiffies;
+			} else
+				locomokbd->count_cancel = 0;
 		}
 		locomokbd_reset_col(membase, col);
 	}

@@ -162,6 +180,8 @@ static void locomokbd_scankeyboard(struct locomokbd *locomokbd)
 	/* if any keys are pressed, enable the timer */
 	if (num_pressed)
 		mod_timer(&locomokbd->timer, jiffies + SCAN_INTERVAL);
+	else
+		locomokbd->count_cancel = 0;
 
 	spin_unlock_irqrestore(&locomokbd->lock, flags);
 }

@@ -186,10 +206,11 @@ static irqreturn_t locomokbd_interrupt(int irq, void *dev_id)
 static void locomokbd_timer_callback(unsigned long data)
 {
 	struct locomokbd *locomokbd = (struct locomokbd *) data;
+
 	locomokbd_scankeyboard(locomokbd);
 }
 
-static int locomokbd_probe(struct locomo_dev *dev)
+static int __devinit locomokbd_probe(struct locomo_dev *dev)
 {
 	struct locomokbd *locomokbd;
 	struct input_dev *input_dev;

@@ -211,7 +232,6 @@ static int locomokbd_probe(struct locomo_dev *dev)
 		goto err_free_mem;
 	}
 
-	locomokbd->ldev = dev;
 	locomo_set_drvdata(dev, locomokbd);
 
 	locomokbd->base = (unsigned long) dev->mapbase;

@@ -222,6 +242,8 @@ static int locomokbd_probe(struct locomo_dev *dev)
 	locomokbd->timer.function = locomokbd_timer_callback;
 	locomokbd->timer.data = (unsigned long) locomokbd;
 
+	locomokbd->suspend_jiffies = jiffies;
+
 	locomokbd->input = input_dev;
 	strcpy(locomokbd->phys, "locomokbd/input0");
 

@@ -233,9 +255,10 @@ static int locomokbd_probe(struct locomo_dev *dev)
 	input_dev->id.version = 0x0100;
 	input_dev->dev.parent = &dev->dev;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
+				BIT_MASK(EV_PWR);
 	input_dev->keycode = locomokbd->keycode;
-	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodesize = sizeof(locomokbd_keycode[0]);
 	input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode);
 
 	memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode));

@@ -268,7 +291,7 @@ static int locomokbd_probe(struct locomo_dev *dev)
 	return err;
 }
 
-static int locomokbd_remove(struct locomo_dev *dev)
+static int __devexit locomokbd_remove(struct locomo_dev *dev)
 {
 	struct locomokbd *locomokbd = locomo_get_drvdata(dev);
 

@@ -292,7 +315,7 @@ static struct locomo_driver keyboard_driver = {
 	},
 	.devid	= LOCOMO_DEVID_KEYBOARD,
 	.probe	= locomokbd_probe,
-	.remove	= locomokbd_remove,
+	.remove	= __devexit_p(locomokbd_remove),
 };
 
 static int __init locomokbd_init(void)

index 57a1c28..a571aa9 100644
@@ -87,6 +87,7 @@ struct ads7846 {
 #endif
 
 	u16			model;
+	u16			vref_mv;
 	u16			vref_delay_usecs;
 	u16			x_plate_ohms;
 	u16			pressure_max;

@@ -184,9 +185,6 @@ struct ads7846 {
  * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
  * ads7846 lets that pin be unconnected, to use internal vREF.
  */
-static unsigned vREF_mV;
-module_param(vREF_mV, uint, 0);
-MODULE_PARM_DESC(vREF_mV, "external vREF voltage, in milliVolts");
 
 struct ser_req {
 	u8			ref_on;

@@ -213,7 +211,6 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	struct ads7846		*ts = dev_get_drvdata(dev);
 	struct ser_req		*req = kzalloc(sizeof *req, GFP_KERNEL);
 	int			status;
-	int			uninitialized_var(sample);
 	int			use_internal;
 
 	if (!req)

@@ -270,13 +267,13 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 
 	if (status == 0) {
 		/* on-wire is a must-ignore bit, a BE12 value, then padding */
-		sample = be16_to_cpu(req->sample);
-		sample = sample >> 3;
-		sample &= 0x0fff;
+		status = be16_to_cpu(req->sample);
+		status = status >> 3;
+		status &= 0x0fff;
 	}
 
 	kfree(req);
-	return status ? status : sample;
+	return status;
 }
 
 #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)

@@ -317,7 +314,7 @@ static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
 	unsigned retval = v;
 
 	/* external resistors may scale vAUX into 0..vREF */
-	retval *= vREF_mV;
+	retval *= ts->vref_mv;
 	retval = retval >> 12;
 	return retval;
 }

@@ -375,14 +372,14 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
 	/* hwmon sensors need a reference voltage */
 	switch (ts->model) {
 	case 7846:
-		if (!vREF_mV) {
+		if (!ts->vref_mv) {
 			dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
-			vREF_mV = 2500;
+			ts->vref_mv = 2500;
 		}
 		break;
 	case 7845:
 	case 7843:
-		if (!vREF_mV) {
+		if (!ts->vref_mv) {
 			dev_warn(&spi->dev,
 				"external vREF for ADS%d not specified\n",
 				ts->model);

@@ -875,6 +872,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	ts->spi = spi;
 	ts->input = input_dev;
+	ts->vref_mv = pdata->vref_mv;
 
 	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	ts->timer.function = ads7846_timer;

index 334d314..daf7440 100644
@@ -14,7 +14,8 @@ enum ads7846_filter {
 struct ads7846_platform_data {
 	u16	model;			/* 7843, 7845, 7846. */
 	u16	vref_delay_usecs;	/* 0 for external vref; etc */
-	int	keep_vref_on:1;		/* set to keep vref on for differential
+	u16	vref_mv;		/* external vref value, milliVolts */
+	bool	keep_vref_on;		/* set to keep vref on for differential
 					 * measurements as well */
 
 	/* Settling time of the analog signals; a function of Vcc and the

789 lines not on this page · raw message

311 lines not on this page · raw message

353 lines not on this page · raw message

462 lines not on this page · raw message

460 lines not on this page · raw message

302 lines not on this page · raw message

index b4423a4..8dd3942 100644
@@ -62,6 +62,10 @@
 #define GEYSER4_ISO_PRODUCT_ID	0x021B
 #define GEYSER4_JIS_PRODUCT_ID	0x021C
 
+#define GEYSER4_HF_ANSI_PRODUCT_ID	0x0229
+#define GEYSER4_HF_ISO_PRODUCT_ID	0x022A
+#define GEYSER4_HF_JIS_PRODUCT_ID	0x022B
+
 #define ATP_DEVICE(prod)					\
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |		\
 		       USB_DEVICE_ID_MATCH_INT_CLASS |		\

@@ -93,6 +97,10 @@ static struct usb_device_id atp_table [] = {
 	{ ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
 	{ ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
 
+	{ ATP_DEVICE(GEYSER4_HF_ANSI_PRODUCT_ID) },
+	{ ATP_DEVICE(GEYSER4_HF_ISO_PRODUCT_ID) },
+	{ ATP_DEVICE(GEYSER4_HF_JIS_PRODUCT_ID) },
+
 	/* Terminating entry */
 	{ }
 };

@@ -217,7 +225,10 @@ static inline int atp_is_geyser_3(struct atp *dev)
 		(productId == GEYSER3_JIS_PRODUCT_ID) ||
 		(productId == GEYSER4_ANSI_PRODUCT_ID) ||
 		(productId == GEYSER4_ISO_PRODUCT_ID) ||
-		(productId == GEYSER4_JIS_PRODUCT_ID);
+		(productId == GEYSER4_JIS_PRODUCT_ID) ||
+		(productId == GEYSER4_HF_ANSI_PRODUCT_ID) ||
+		(productId == GEYSER4_HF_ISO_PRODUCT_ID) ||
+		(productId == GEYSER4_HF_JIS_PRODUCT_ID);
 }
 
 /*

index 3884d1e..a247006 100644
@@ -52,7 +52,7 @@ KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_
 struct tosakbd {
 	unsigned int keycode[ARRAY_SIZE(tosakbd_keycode)];
 	struct input_dev *input;
-
+	int suspended;
 	spinlock_t lock; /* protect kbd scanning */
 	struct timer_list timer;
 };

@@ -133,6 +133,9 @@ static void tosakbd_scankeyboard(struct platform_device *dev)
 
 	spin_lock_irqsave(&tosakbd->lock, flags);
 
+	if (tosakbd->suspended)
+		goto out;
+
 	for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) {
 		/*
 		 * Discharge the output driver capacitatance

@@ -174,6 +177,7 @@ static void tosakbd_scankeyboard(struct platform_device *dev)
 	if (num_pressed)
 		mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL);
 
+ out:
 	spin_unlock_irqrestore(&tosakbd->lock, flags);
 }
 

@@ -200,6 +204,7 @@ static irqreturn_t tosakbd_interrupt(int irq, void *__dev)
 static void tosakbd_timer_callback(unsigned long __dev)
 {
 	struct platform_device *dev = (struct platform_device *)__dev;
+
 	tosakbd_scankeyboard(dev);
 }
 

@@ -207,6 +212,13 @@ static void tosakbd_timer_callback(unsigned long __dev)
 static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct tosakbd *tosakbd = platform_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tosakbd->lock, flags);
+	PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT);
+	PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT);
+	tosakbd->suspended = 1;
+	spin_unlock_irqrestore(&tosakbd->lock, flags);
 
 	del_timer_sync(&tosakbd->timer);
 

@@ -215,6 +227,9 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
 
 static int tosakbd_resume(struct platform_device *dev)
 {
+	struct tosakbd *tosakbd = platform_get_drvdata(dev);
+
+	tosakbd->suspended = 0;
 	tosakbd_scankeyboard(dev);
 
 	return 0;

@@ -365,8 +380,8 @@ fail:
 	return error;
 }
 
-static int __devexit tosakbd_remove(struct platform_device *dev) {
-
+static int __devexit tosakbd_remove(struct platform_device *dev)
+{
 	int i;
 	struct tosakbd *tosakbd = platform_get_drvdata(dev);
 

index 0380597..8804ad3 100644
@@ -91,6 +91,7 @@
 
 #define XTYPE_XBOX        0
 #define XTYPE_XBOX360     1
+#define XTYPE_UNKNOWN     2
 
 static int dpad_to_buttons;
 module_param(dpad_to_buttons, bool, S_IRUGO);

@@ -138,7 +139,7 @@ static const struct xpad_device {
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_XBOX }
+	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN }
 };
 
 static const signed short xpad_btn[] = {

@@ -173,12 +174,20 @@ static const signed short xpad_abs_pad[] = {
 	-1			/* terminating entry */
 };
 
-/* Xbox 360 has a vendor-specific (sub)class, so we cannot match it with only
- * USB_INTERFACE_INFO, more to that this device has 4 InterfaceProtocols,
- * but we need only one of them. */
+/* Xbox 360 has a vendor-specific class, so we cannot match it with only
+ * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
+ * match against vendor id as well. Also, some Xbox 360 devices have multiple
+ * interface protocols, we only need protocol 1. */
+#define XPAD_XBOX360_VENDOR(vend) \
+	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
+	.idVendor = (vend), \
+	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
+	.bInterfaceSubClass = 93, \
+	.bInterfaceProtocol = 1
+
 static struct usb_device_id xpad_table [] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(0x045e, 0x028e, 1) },	/* X-Box 360 controller */
+	{ XPAD_XBOX360_VENDOR(0x045e) },	/* Microsoft X-Box 360 controllers */
 	{ }
 };
 

@@ -645,6 +654,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	xpad->xtype = xpad_device[i].xtype;
 	if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
 		xpad->dpad_mapping = dpad_to_buttons;
+	if (xpad->xtype == XTYPE_UNKNOWN)
+		xpad->xtype = (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC);
 	xpad->dev = input_dev;
 	usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
 	strlcat(xpad->phys, "/input0", sizeof(xpad->phys));

index 8804ad3..6288c4f 100644
@@ -87,7 +87,7 @@
    but we map them to axes when possible to simplify things */
 #define MAP_DPAD_TO_BUTTONS    0
 #define MAP_DPAD_TO_AXES       1
-#define MAP_DPAD_UNKNOWN       -1
+#define MAP_DPAD_UNKNOWN       2
 
 #define XTYPE_XBOX        0
 #define XTYPE_XBOX360     1

@@ -653,7 +653,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	xpad->dpad_mapping = xpad_device[i].dpad_mapping;
 	xpad->xtype = xpad_device[i].xtype;
 	if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
-		xpad->dpad_mapping = dpad_to_buttons;
+		xpad->dpad_mapping = !dpad_to_buttons;
 	if (xpad->xtype == XTYPE_UNKNOWN)
 		xpad->xtype = (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC);
 	xpad->dev = input_dev;

index 6288c4f..316d987 100644
@@ -236,13 +236,13 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 	input_report_abs(dev, ABS_X,
 			 (__s16) le16_to_cpup((__le16 *)(data + 12)));
 	input_report_abs(dev, ABS_Y,
-			 (__s16) le16_to_cpup((__le16 *)(data + 14)));
+			 ~(__s16) le16_to_cpup((__le16 *)(data + 14)));
 
 	/* right stick */
 	input_report_abs(dev, ABS_RX,
 			 (__s16) le16_to_cpup((__le16 *)(data + 16)));
 	input_report_abs(dev, ABS_RY,
-			 (__s16) le16_to_cpup((__le16 *)(data + 18)));
+			 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
 
 	/* triggers left/right */
 	input_report_abs(dev, ABS_Z, data[10]);

@@ -330,13 +330,13 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 	input_report_abs(dev, ABS_X,
 			 (__s16) le16_to_cpup((__le16 *)(data + 6)));
 	input_report_abs(dev, ABS_Y,
-			 (__s16) le16_to_cpup((__le16 *)(data + 8)));
+			 ~(__s16) le16_to_cpup((__le16 *)(data + 8)));
 
 	/* right stick */
 	input_report_abs(dev, ABS_RX,
 			 (__s16) le16_to_cpup((__le16 *)(data + 10)));
 	input_report_abs(dev, ABS_RY,
-			 (__s16) le16_to_cpup((__le16 *)(data + 12)));
+			 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
 
 	/* triggers left/right */
 	input_report_abs(dev, ABS_Z, data[4]);

index 316d987..8952495 100644
@@ -110,6 +110,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x046d, 0xc242, "Logitech Chillstream Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES, XTYPE_XBOX },

@@ -136,6 +137,7 @@ static const struct xpad_device {
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },

@@ -188,6 +190,10 @@ static const signed short xpad_abs_pad[] = {
 static struct usb_device_id xpad_table [] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
 	{ XPAD_XBOX360_VENDOR(0x045e) },	/* Microsoft X-Box 360 controllers */
+	{ XPAD_XBOX360_VENDOR(0x046d) },	/* Logitech X-Box 360 style controllers */
+	{ XPAD_XBOX360_VENDOR(0x0738) },	/* Mad Catz X-Box 360 controllers */
+	{ XPAD_XBOX360_VENDOR(0x0e6f) },	/* 0x0e6f X-Box 360 controllers */
+	{ XPAD_XBOX360_VENDOR(0x1430) },	/* RedOctane X-Box 360 controllers */
 	{ }
 };
 

index 8952495..b48f705 100644
@@ -144,12 +144,19 @@ static const struct xpad_device {
 	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN }
 };
 
-static const signed short xpad_btn[] = {
-	BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z,	/* "analog" buttons */
+/* buttons shared with xbox and xbox360 */
+static const signed short xpad_common_btn[] = {
+	BTN_A, BTN_B, BTN_X, BTN_Y,			/* "analog" buttons */
 	BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR,	/* start/back/sticks */
 	-1						/* terminating entry */
 };
 
+/* original xbox controllers only */
+static const signed short xpad_btn[] = {
+	BTN_C, BTN_Z,		/* "analog" buttons */
+	-1			/* terminating entry */
+};
+
 /* only used if MAP_DPAD_TO_BUTTONS */
 static const signed short xpad_btn_pad[] = {
 	BTN_LEFT, BTN_RIGHT,		/* d-pad left, right */

@@ -679,11 +686,14 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 
 	/* set up buttons */
-	for (i = 0; xpad_btn[i] >= 0; i++)
-		set_bit(xpad_btn[i], input_dev->keybit);
+	for (i = 0; xpad_common_btn[i] >= 0; i++)
+		set_bit(xpad_common_btn[i], input_dev->keybit);
 	if (xpad->xtype == XTYPE_XBOX360)
 		for (i = 0; xpad360_btn[i] >= 0; i++)
 			set_bit(xpad360_btn[i], input_dev->keybit);
+	else
+		for (i = 0; xpad_btn[i] >= 0; i++)
+			set_bit(xpad_btn[i], input_dev->keybit);
 	if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
 		for (i = 0; xpad_btn_pad[i] >= 0; i++)
 			set_bit(xpad_btn_pad[i], input_dev->keybit);

index b48f705..fd80113 100644
@@ -499,6 +499,9 @@ static int xpad_play_effect(struct input_dev *dev, void *data,
 
 static int xpad_init_ff(struct usb_xpad *xpad)
 {
+	if (xpad->xtype != XTYPE_XBOX360)
+		return 0;
+
 	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
 
 	return input_ff_create_memless(xpad->dev, NULL, xpad_play_effect);

index fd80113..7188eec 100644
@@ -1,5 +1,5 @@
 /*
- * X-Box gamepad - v0.0.6
+ * X-Box gamepad driver
  *
  * Copyright (c) 2002 Marko Friedemann <[email protected]>
  *               2004 Oliver Schwartz <[email protected]>,

@@ -68,6 +68,8 @@
  *  - dance pads will map D-PAD to buttons, not axes
  *  - pass the module paramater 'dpad_to_buttons' to force
  *    the D-PAD to map to buttons if your pad is not detected
+ *
+ * Later changes can be tracked in SCM.
  */
 
 #include <linux/kernel.h>

@@ -77,7 +79,6 @@
 #include <linux/module.h>
 #include <linux/usb/input.h>
 
-#define DRIVER_VERSION "v0.0.6"
 #define DRIVER_AUTHOR "Marko Friedemann <[email protected]>"
 #define DRIVER_DESC "X-Box pad driver"
 

@@ -771,7 +772,7 @@ static int __init usb_xpad_init(void)
 {
 	int result = usb_register(&xpad_driver);
 	if (result == 0)
-		info(DRIVER_DESC ":" DRIVER_VERSION);
+		info(DRIVER_DESC);
 	return result;
 }
 

index 7188eec..ebf8303 100644
@@ -92,7 +92,8 @@
 
 #define XTYPE_XBOX        0
 #define XTYPE_XBOX360     1
-#define XTYPE_UNKNOWN     2
+#define XTYPE_XBOX360W    2
+#define XTYPE_UNKNOWN     3
 
 static int dpad_to_buttons;
 module_param(dpad_to_buttons, bool, S_IRUGO);

@@ -109,6 +110,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x046d, 0xc242, "Logitech Chillstream Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },

@@ -186,22 +188,25 @@ static const signed short xpad_abs_pad[] = {
 
 /* Xbox 360 has a vendor-specific class, so we cannot match it with only
  * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
- * match against vendor id as well. Also, some Xbox 360 devices have multiple
- * interface protocols, we only need protocol 1. */
-#define XPAD_XBOX360_VENDOR(vend) \
+ * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
+ * wireless controllers have protocol 129. */
+#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
 	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
 	.idVendor = (vend), \
 	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
 	.bInterfaceSubClass = 93, \
-	.bInterfaceProtocol = 1
+	.bInterfaceProtocol = (pr)
+#define XPAD_XBOX360_VENDOR(vend) \
+	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
+	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
 
 static struct usb_device_id xpad_table [] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
-	{ XPAD_XBOX360_VENDOR(0x045e) },	/* Microsoft X-Box 360 controllers */
-	{ XPAD_XBOX360_VENDOR(0x046d) },	/* Logitech X-Box 360 style controllers */
-	{ XPAD_XBOX360_VENDOR(0x0738) },	/* Mad Catz X-Box 360 controllers */
-	{ XPAD_XBOX360_VENDOR(0x0e6f) },	/* 0x0e6f X-Box 360 controllers */
-	{ XPAD_XBOX360_VENDOR(0x1430) },	/* RedOctane X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
+	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
 	{ }
 };
 

@@ -211,10 +216,15 @@ struct usb_xpad {
 	struct input_dev *dev;		/* input device interface */
 	struct usb_device *udev;	/* usb device */
 
+	int pad_present;
+
 	struct urb *irq_in;		/* urb for interrupt in report */
 	unsigned char *idata;		/* input data */
 	dma_addr_t idata_dma;
 
+	struct urb *bulk_out;
+	unsigned char *bdata;
+
 #if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
 	struct urb *irq_out;		/* urb for interrupt out report */
 	unsigned char *odata;		/* output data */

@@ -359,6 +369,39 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 	input_sync(dev);
 }
 
+/*
+ * xpad360w_process_packet
+ *
+ * Completes a request by converting the data into events for the
+ * input subsystem. It is version for xbox 360 wireless controller.
+ *
+ * Byte.Bit
+ * 00.1 - Status change: The controller or headset has connected/disconnected
+ *                       Bits 01.7 and 01.6 are valid
+ * 01.7 - Controller present
+ * 01.6 - Headset present
+ * 01.1 - Pad state (Bytes 4+) valid
+ *
+ */
+
+static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
+{
+	/* Presence change */
+	if (data[0] & 0x08) {
+		if (data[1] & 0x80) {
+			xpad->pad_present = 1;
+			usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
+		} else
+			xpad->pad_present = 0;
+	}
+
+	/* Valid pad data */
+	if (!(data[1] & 0x1))
+		return;
+
+	xpad360_process_packet(xpad, cmd, &data[4]);
+}
+
 static void xpad_irq_in(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;

@@ -381,10 +424,16 @@ static void xpad_irq_in(struct urb *urb)
 		goto exit;
 	}
 
-	if (xpad->xtype == XTYPE_XBOX360)
+	switch (xpad->xtype) {
+	case XTYPE_XBOX360:
 		xpad360_process_packet(xpad, 0, xpad->idata);
-	else
+		break;
+	case XTYPE_XBOX360W:
+		xpad360w_process_packet(xpad, 0, xpad->idata);
+		break;
+	default:
 		xpad_process_packet(xpad, 0, xpad->idata);
+	}
 
 exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);

@@ -422,6 +471,23 @@ exit:
 		    __FUNCTION__, retval);
 }
 
+static void xpad_bulk_out(struct urb *urb)
+{
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		break;
+	default:
+		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+	}
+}
+
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 {
 	struct usb_endpoint_descriptor *ep_irq_out;

@@ -600,6 +666,10 @@ static int xpad_open(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
+	/* URB was submitted in probe */
+	if(xpad->xtype == XTYPE_XBOX360W)
+		return 0;
+
 	xpad->irq_in->dev = xpad->udev;
 	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
 		return -EIO;

@@ -611,7 +681,8 @@ static void xpad_close(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
-	usb_kill_urb(xpad->irq_in);
+	if(xpad->xtype != XTYPE_XBOX360W)
+		usb_kill_urb(xpad->irq_in);
 	xpad_stop_output(xpad);
 }
 

@@ -671,8 +742,15 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	xpad->xtype = xpad_device[i].xtype;
 	if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
 		xpad->dpad_mapping = !dpad_to_buttons;
-	if (xpad->xtype == XTYPE_UNKNOWN)
-		xpad->xtype = (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC);
+	if (xpad->xtype == XTYPE_UNKNOWN) {
+		if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
+			if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
+				xpad->xtype = XTYPE_XBOX360W;
+			else
+				xpad->xtype = XTYPE_XBOX360;
+		} else
+			xpad->xtype = XTYPE_XBOX;
+	}
 	xpad->dev = input_dev;
 	usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
 	strlcat(xpad->phys, "/input0", sizeof(xpad->phys));

@@ -692,7 +770,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	/* set up buttons */
 	for (i = 0; xpad_common_btn[i] >= 0; i++)
 		set_bit(xpad_common_btn[i], input_dev->keybit);
-	if (xpad->xtype == XTYPE_XBOX360)
+	if ((xpad->xtype == XTYPE_XBOX360) || (xpad->xtype == XTYPE_XBOX360W))
 		for (i = 0; xpad360_btn[i] >= 0; i++)
 			set_bit(xpad360_btn[i], input_dev->keybit);
 	else

@@ -734,8 +812,57 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		goto fail4;
 
 	usb_set_intfdata(intf, xpad);
+
+	/*
+	 * Submit the int URB immediatly rather than waiting for open
+	 * because we get status messages from the device whether
+	 * or not any controllers are attached.  In fact, it's
+	 * exactly the message that a controller has arrived that
+	 * we're waiting for.
+	 */
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		xpad->irq_in->dev = xpad->udev;
+		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+		if (error)
+			goto fail4;
+
+		/*
+		 * Setup the message to set the LEDs on the
+		 * controller when it shows up
+		 */
+		xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
+		if(!xpad->bulk_out)
+			goto fail5;
+
+		xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
+		if(!xpad->bdata)
+			goto fail6;
+
+		xpad->bdata[2] = 0x08;
+		switch (intf->cur_altsetting->desc.bInterfaceNumber) {
+		case 0:
+			xpad->bdata[3] = 0x42;
+			break;
+		case 2:
+			xpad->bdata[3] = 0x43;
+			break;
+		case 4:
+			xpad->bdata[3] = 0x44;
+			break;
+		case 6:
+			xpad->bdata[3] = 0x45;
+		}
+
+		ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
+		usb_fill_bulk_urb(xpad->bulk_out, udev,
+				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
+				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+	}
+
 	return 0;
 
+ fail6:	usb_free_urb(xpad->bulk_out);
+ fail5:	usb_kill_urb(xpad->irq_in);
  fail4:	usb_free_urb(xpad->irq_in);
  fail3:	xpad_deinit_output(xpad);
  fail2:	usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);

@@ -754,6 +881,11 @@ static void xpad_disconnect(struct usb_interface *intf)
 		xpad_led_disconnect(xpad);
 		input_unregister_device(xpad->dev);
 		xpad_deinit_output(xpad);
+		if (xpad->xtype == XTYPE_XBOX360W) {
+			usb_kill_urb(xpad->bulk_out);
+			usb_free_urb(xpad->bulk_out);
+			usb_kill_urb(xpad->irq_in);
+		}
 		usb_free_urb(xpad->irq_in);
 		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
 				xpad->idata, xpad->idata_dma);

index ebf8303..d4d289e 100644
@@ -497,7 +497,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 		return 0;
 
 	xpad->odata = usb_buffer_alloc(xpad->udev, XPAD_PKT_LEN,
-				       GFP_ATOMIC, &xpad->odata_dma );
+				       GFP_KERNEL, &xpad->odata_dma);
 	if (!xpad->odata)
 		goto fail1;
 

@@ -729,7 +729,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		goto fail1;
 
 	xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
-				       GFP_ATOMIC, &xpad->idata_dma);
+				       GFP_KERNEL, &xpad->idata_dma);
 	if (!xpad->idata)
 		goto fail1;
 

index 63f9664..3a0a8ca 100644
@@ -396,9 +396,12 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 {
 	struct usb_device *dev = usbtouch->udev;
-	int ret;
-	unsigned char buf[2];
+	int ret = -ENOMEM;
+	unsigned char *buf;
 
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		goto err_nobuf;
 	/* reset */
 	buf[0] = buf[1] = 0xFF;
 	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),

@@ -406,9 +409,11 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 	                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
 	if (ret < 0)
-		return ret;
-	if (buf[0] != 0x06 || buf[1] != 0x00)
-		return -ENODEV;
+		goto err_out;
+	if (buf[0] != 0x06 || buf[1] != 0x00) {
+		ret = -ENODEV;
+		goto err_out;
+	}
 
 	/* set coordinate output rate */
 	buf[0] = buf[1] = 0xFF;

@@ -417,20 +422,22 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 	                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
 	if (ret < 0)
-		return ret;
+		goto err_out;
 	if ((buf[0] != 0x06 || buf[1] != 0x00) &&
-	    (buf[0] != 0x15 || buf[1] != 0x01))
-		return -ENODEV;
+	    (buf[0] != 0x15 || buf[1] != 0x01)) {
+		ret = -ENODEV;
+		goto err_out;
+	}
 
 	/* start sending data */
 	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
 	                      TSC10_CMD_DATA1,
 	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (ret < 0)
-		return ret;
-
-	return 0;
+err_out:
+	kfree(buf);
+err_nobuf:
+	return ret;
 }
 
 

index 4dbd342..59608e3 100644
@@ -1237,6 +1237,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 	}
 
 	param.shift = shift_final = (shift_state | kbd->slockstate) ^ kbd->lockstate;
+	param.ledstate = kbd->ledflagstate;
 	key_map = key_maps[shift_final];
 
 	if (atomic_notifier_call_chain(&keyboard_notifier_list, KBD_KEYCODE, &param) == NOTIFY_STOP || !key_map) {

@@ -1285,6 +1286,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 
 	(*k_handler[type])(vc, keysym & 0xff, !down);
 
+	param.ledstate = kbd->ledflagstate;
 	atomic_notifier_call_chain(&keyboard_notifier_list, KBD_POST_KEYSYM, &param);
 
 	if (type != KT_SLOCK)

index 65c2d70..a3c984d 100644
@@ -33,6 +33,7 @@ struct keyboard_notifier_param {
 	struct vc_data *vc;	/* VC on which the keyboard press was done */
 	int down;		/* Pressure of the key? */
 	int shift;		/* Current shift mask */
+	int ledstate;		/* Current led state */
 	unsigned int value;	/* keycode, unicode value or keysym */
 };
 

375 lines not on this page · raw message

index e49747a..78acab7 100644
@@ -302,6 +302,6 @@ static void __exit psif_exit(void)
 module_init(psif_init);
 module_exit(psif_exit);
 
-MODULE_AUTHOR("Hans-Christian Egtvedt <[email protected]>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <[email protected]>");
 MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
 MODULE_LICENSE("GPL");

index 6a9ca4b..a54dc15 100644
@@ -43,10 +43,11 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 
 			input_event(input, type, button->code, !!state);
 			input_sync(input);
+			return IRQ_HANDLED;
 		}
 	}
 
-	return IRQ_HANDLED;
+	return IRQ_NONE;
 }
 
 static int __devinit gpio_keys_probe(struct platform_device *pdev)

index babc913..eec3281 100644
@@ -352,6 +352,9 @@ static int __init omap_kp_probe(struct platform_device *pdev)
 			}
 			omap_set_gpio_direction(row_gpios[row_idx], 1);
 		}
+	} else {
+		col_idx = 0;
+		row_idx = 0;
 	}
 
 	setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);

@@ -415,10 +418,10 @@ err4:
 err3:
 	device_remove_file(&pdev->dev, &dev_attr_enable);
 err2:
-	for (i = row_idx-1; i >=0; i--)
+	for (i = row_idx - 1; i >=0; i--)
 		omap_free_gpio(row_gpios[i]);
 err1:
-	for (i = col_idx-1; i >=0; i--)
+	for (i = col_idx - 1; i >=0; i--)
 		omap_free_gpio(col_gpios[i]);
 
 	kfree(omap_kp);

index d4d289e..52ddb04 100644
@@ -558,6 +558,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data,
 		xpad->odata[5] = 0x00;
 		xpad->odata[6] = 0x00;
 		xpad->odata[7] = 0x00;
+		xpad->irq_out->transfer_buffer_length = 8;
 		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
 	}
 

@@ -594,6 +595,7 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command)
 		xpad->odata[0] = 0x01;
 		xpad->odata[1] = 0x03;
 		xpad->odata[2] = command;
+		xpad->irq_out->transfer_buffer_length = 3;
 		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
 		mutex_unlock(&xpad->odata_mutex);
 	}

index acf9830..706619d 100644
@@ -101,8 +101,11 @@ struct wacom {
 	dma_addr_t data_dma;
 	struct input_dev *dev;
 	struct usb_device *usbdev;
+	struct usb_interface *intf;
 	struct urb *irq;
 	struct wacom_wac * wacom_wac;
+	struct mutex lock;
+	int open:1;
 	char phys[32];
 };
 

118 lines not on this page · raw message

index e29a057..17b2f49 100644
@@ -405,6 +405,9 @@
 #define USB_VENDOR_ID_YEALINK		0x6993
 #define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K	0xb001
 
+#define USB_VENDOR_ID_KYE		0x0458
+#define USB_DEVICE_ID_KYE_GPEN_560	0x5003
+
 /*
  * Alphabetically sorted blacklist by quirk type.
  */

@@ -703,6 +706,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_63, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_64, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR, USB_DEVICE_ID_N_S_HARMONY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560, HID_QUIRK_IGNORE },
 
 	{ 0, 0 }
 };

index 94683f5..1d759f6 100644
@@ -184,6 +184,7 @@
  */
 
 #define USB_VENDOR_ID_AIPTEK				0x08ca
+#define USB_VENDOR_ID_KYE				0x0458
 #define USB_REQ_GET_REPORT				0x01
 #define USB_REQ_SET_REPORT				0x09
 

@@ -832,6 +833,7 @@ static const struct usb_device_id aiptek_ids[] = {
 	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
 	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
 	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
+	{USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)},
 	{}
 };
 

243 lines not on this page · raw message

index 9f38250..95674d9 100644
@@ -211,5 +211,6 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_TOUCHWIN	0x33
 #define SERIO_TAOSEVM	0x34
 #define SERIO_FUJITSU	0x35
+#define SERIO_ZHENHUA	0x36
 
 #endif

index 2910999..e27b1e0 100644
@@ -328,18 +328,18 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
  *
  * We have to disable the codec interrupt in the handler because it
  * can take upto 1ms to clear the interrupt source. We schedule a task
- * in a work queue to do the actual interaction with the chip (it
- * doesn't matter if we end up reenqueing it before it is executed
- * since we don't touch the chip until it has run).  The interrupt is
- * then enabled again in the slow handler when the source has been
- * cleared.
+ * in a work queue to do the actual interaction with the chip.  The
+ * interrupt is then enabled again in the slow handler when the source
+ * has been cleared.
  */
 static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
 {
 	struct wm97xx *wm = dev_id;
 
-	wm->mach_ops->irq_enable(wm, 0);
-	queue_work(wm->ts_workq, &wm->pen_event_work);
+	if (!work_pending(&wm->pen_event_work)) {
+		wm->mach_ops->irq_enable(wm, 0);
+		queue_work(wm->ts_workq, &wm->pen_event_work);
+	}
 
 	return IRQ_HANDLED;
 }

index e27b1e0..fec07c2 100644
@@ -355,7 +355,8 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm)
 	 * provided. */
 	BUG_ON(!wm->mach_ops->irq_enable);
 
-	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
+	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
+			IRQF_SHARED | IRQF_SAMPLE_RANDOM,
 			"wm97xx-pen", wm)) {
 		dev_err(wm->dev,
 			"Failed to register pen down interrupt, polling");

index fec07c2..e9c7ea4 100644
@@ -262,6 +262,23 @@ void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
 EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
 
 /*
+ * Configure the WM97XX_PRP value to use while system is suspended.
+ * If a value other than 0 is set then WM97xx pen detection will be
+ * left enabled in the configured mode while the system is in suspend,
+ * the device has users and suspend has not been disabled via the
+ * wakeup sysfs entries.
+ *
+ * @wm:   WM97xx device to configure
+ * @mode: WM97XX_PRP value to configure while suspended
+ */
+void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode)
+{
+	wm->suspend_mode = mode;
+	device_init_wakeup(&wm->input_dev->dev, mode != 0);
+}
+EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);
+
+/*
  * Handle a pen down interrupt.
  */
 static void wm97xx_pen_irq_worker(struct work_struct *work)

@@ -689,10 +706,32 @@ static int wm97xx_remove(struct device *dev)
 static int wm97xx_suspend(struct device *dev, pm_message_t state)
 {
 	struct wm97xx *wm = dev_get_drvdata(dev);
+	u16 reg;
+	int suspend_mode;
+
+	if (device_may_wakeup(&wm->input_dev->dev))
+		suspend_mode = wm->suspend_mode;
+	else
+		suspend_mode = 0;
 
 	if (wm->input_dev->users)
 		cancel_delayed_work_sync(&wm->ts_reader);
 
+	/* Power down the digitiser (bypassing the cache for resume) */
+	reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2);
+	reg &= ~WM97XX_PRP_DET_DIG;
+	if (wm->input_dev->users)
+		reg |= suspend_mode;
+	wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg);
+
+	/* WM9713 has an additional power bit - turn it off if there
+	 * are no users or if suspend mode is zero. */
+	if (wm->id == WM9713_ID2 &&
+	    (!wm->input_dev->users || !suspend_mode)) {
+		reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000;
+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
+	}
+
 	return 0;
 }
 

index ed01c7d..4d13732 100644
@@ -282,6 +282,7 @@ struct wm97xx {
 	unsigned pen_is_down:1;		/* Pen is down */
 	unsigned aux_waiting:1;		/* aux measurement waiting */
 	unsigned pen_probably_down:1;	/* used in polling mode */
+	u16 suspend_mode;               /* PRP in suspend mode */
 };
 
 /*

@@ -297,6 +298,8 @@ void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio,
 				     enum wm97xx_gpio_sticky sticky,
 				     enum wm97xx_gpio_wake wake);
 
+void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode);
+
 /* codec AC97 IO access */
 int wm97xx_reg_read(struct wm97xx *wm, u16 reg);
 void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val);

index 59608e3..45806d2 100644
@@ -42,6 +42,7 @@
 #include <linux/input.h>
 #include <linux/reboot.h>
 #include <linux/notifier.h>
+#include <linux/jiffies.h>
 
 extern void ctrl_alt_del(void);
 

@@ -928,7 +929,8 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
 	if (up_flag) {
 		if (brl_timeout) {
 			if (!committing ||
-			    jiffies - releasestart > (brl_timeout * HZ) / 1000) {
+			    time_after(jiffies,
+				       releasestart + msecs_to_jiffies(brl_timeout))) {
 				committing = pressed;
 				releasestart = jiffies;
 			}

index 72abc19..a293e8b 100644
@@ -156,11 +156,15 @@ static int __devexit aaedkbd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:aaed2000-keyboard");
+
 static struct platform_driver aaedkbd_driver = {
 	.probe		= aaedkbd_probe,
 	.remove		= __devexit_p(aaedkbd_remove),
 	.driver		= {
 		.name	= "aaed2000-keyboard",
+		.owner	= THIS_MODULE,
 	},
 };
 

index 05e3494..d87ac33 100644
@@ -359,6 +359,7 @@ struct platform_driver bfin_kpad_device_driver = {
 	.remove		= __devexit_p(bfin_kpad_remove),
 	.driver		= {
 		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
 	}
 };
 

@@ -378,3 +379,4 @@ module_exit(bfin_kpad_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michael Hennerich <[email protected]>");
 MODULE_DESCRIPTION("Keypad driver for BF54x Processors");
+MODULE_ALIAS("platform:bf54x-keys");

index 790fed3..5187c0c 100644
@@ -392,6 +392,7 @@ static struct platform_driver corgikbd_driver = {
 	.resume		= corgikbd_resume,
 	.driver		= {
 		.name	= "corgi-keyboard",
+		.owner	= THIS_MODULE,
 	},
 };
 

@@ -411,3 +412,4 @@ module_exit(corgikbd_exit);
 MODULE_AUTHOR("Richard Purdie <[email protected]>");
 MODULE_DESCRIPTION("Corgi Keyboard Driver");
 MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:corgi-keyboard");

index a54dc15..bbd00c3 100644
@@ -214,6 +214,7 @@ struct platform_driver gpio_keys_device_driver = {
 	.resume		= gpio_keys_resume,
 	.driver		= {
 		.name	= "gpio-keys",
+		.owner	= THIS_MODULE,
 	}
 };
 

@@ -233,3 +234,4 @@ module_exit(gpio_keys_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Phil Blundell <[email protected]>");
 MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs");
+MODULE_ALIAS("platform:gpio-keys");

index a23633a..9387da3 100644
@@ -254,6 +254,7 @@ static int __devexit jornada680kbd_remove(struct platform_device *pdev)
 static struct platform_driver jornada680kbd_driver = {
 	.driver	= {
 		.name	= "jornada680_kbd",
+		.owner	= THIS_MODULE,
 	},
 	.probe	= jornada680kbd_probe,
 	.remove	= __devexit_p(jornada680kbd_remove),

@@ -275,3 +276,4 @@ module_exit(jornada680kbd_exit);
 MODULE_AUTHOR("Kristoffer Ericson <[email protected]>");
 MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver");
 MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:jornada680_kbd");

index 986f93c..a1164a0 100644
@@ -162,9 +162,13 @@ static int __devexit jornada720_kbd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:jornada720_kbd");
+
 static struct platform_driver jornada720_kbd_driver = {
 	.driver  = {
 		.name    = "jornada720_kbd",
+		.owner	= THIS_MODULE,
 	 },
 	.probe   = jornada720_kbd_probe,
 	.remove  = __devexit_p(jornada720_kbd_remove),

index eec3281..10afd20 100644
@@ -467,6 +467,7 @@ static struct platform_driver omap_kp_driver = {
 	.resume		= omap_kp_resume,
 	.driver		= {
 		.name	= "omap-keypad",
+		.owner	= THIS_MODULE,
 	},
 };
 

@@ -487,3 +488,4 @@ module_exit(omap_kp_exit);
 MODULE_AUTHOR("Timo Teräs");
 MODULE_DESCRIPTION("OMAP Keypad Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-keypad");

index 4e651c1..3dea0c5 100644
@@ -545,6 +545,9 @@ static int __devexit pxa27x_keypad_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-keypad");
+
 static struct platform_driver pxa27x_keypad_driver = {
 	.probe		= pxa27x_keypad_probe,
 	.remove		= __devexit_p(pxa27x_keypad_remove),

@@ -552,6 +555,7 @@ static struct platform_driver pxa27x_keypad_driver = {
 	.resume		= pxa27x_keypad_resume,
 	.driver		= {
 		.name	= "pxa27x-keypad",
+		.owner	= THIS_MODULE,
 	},
 };
 

index 1d59a2d..92102f9 100644
@@ -494,3 +494,4 @@ module_exit(spitzkbd_exit);
 MODULE_AUTHOR("Richard Purdie <[email protected]>");
 MODULE_DESCRIPTION("Spitz Keyboard Driver");
 MODULE_LICENSE("GPLv2");
+MODULE_ALIAS("platform:spitz-keyboard");

index a247006..94e444b 100644
@@ -409,6 +409,7 @@ static struct platform_driver tosakbd_driver = {
 	.resume		= tosakbd_resume,
 	.driver		= {
 		.name	= "tosa-keyboard",
+		.owner	= THIS_MODULE,
 	},
 };
 

@@ -428,3 +429,4 @@ module_exit(tosakbd_exit);
 MODULE_AUTHOR("Dirk Opfer <[email protected]>");
 MODULE_DESCRIPTION("Tosa Keyboard Driver");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tosa-keyboard");

index 5511ef0..6a1f48b 100644
@@ -148,6 +148,9 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:Cobalt buttons");
+
 static struct platform_driver cobalt_buttons_driver = {
 	.probe	= cobalt_buttons_probe,
 	.remove	= __devexit_p(cobalt_buttons_remove),

index 0936d6b..3392901 100644
@@ -171,10 +171,14 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:gpio_mouse");
+
 struct platform_driver gpio_mouse_device_driver = {
 	.remove		= __devexit_p(gpio_mouse_remove),
 	.driver		= {
 		.name	= "gpio_mouse",
+		.owner	= THIS_MODULE,
 	}
 };
 

index 49f8431..34c59d9 100644
@@ -45,6 +45,7 @@
 MODULE_AUTHOR("Vojtech Pavlik, Russell King");
 MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kart");
 
 static int rpckbd_write(struct serio *port, unsigned char val)
 {

@@ -140,6 +141,7 @@ static struct platform_driver rpckbd_driver = {
 	.remove		= __devexit_p(rpckbd_remove),
 	.driver		= {
 		.name	= "kart",
+		.owner	= THIS_MODULE,
 	},
 };
 

index 99d92f5..765e964 100644
@@ -361,6 +361,7 @@ static struct platform_driver corgits_driver = {
 	.resume		= corgits_resume,
 	.driver		= {
 		.name	= "corgi-ts",
+		.owner	= THIS_MODULE,
 	},
 };
 

@@ -380,3 +381,4 @@ module_exit(corgits_exit);
 MODULE_AUTHOR("Richard Purdie <[email protected]>");
 MODULE_DESCRIPTION("Corgi TouchScreen Driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:corgi-ts");

index 42a1c9a..7422421 100644
@@ -160,11 +160,15 @@ static int __devexit jornada720_ts_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:jornada_ts");
+
 static struct platform_driver jornada720_ts_driver = {
 	.probe		= jornada720_ts_probe,
 	.remove		= __devexit_p(jornada720_ts_remove),
 	.driver		= {
 		.name	= "jornada_ts",
+		.owner	= THIS_MODULE,
 	},
 };
 

index d87ac33..54ed8e2 100644
@@ -312,6 +312,8 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev)
 
 	bfin_write_KPAD_CTL(bfin_read_KPAD_CTL() | KPAD_EN);
 
+	device_init_wakeup(&pdev->dev, 1);
+
 	printk(KERN_ERR DRV_NAME
 		": Blackfin BF54x Keypad registered IRQ %d\n", bf54x_kpad->irq);
 

@@ -354,13 +356,40 @@ static int __devexit bfin_kpad_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int bfin_kpad_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(bf54x_kpad->irq);
+
+	return 0;
+}
+
+static int bfin_kpad_resume(struct platform_device *pdev)
+{
+	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(bf54x_kpad->irq);
+
+	return 0;
+}
+#else
+# define bfin_kpad_suspend NULL
+# define bfin_kpad_resume  NULL
+#endif
+
 struct platform_driver bfin_kpad_device_driver = {
-	.probe		= bfin_kpad_probe,
-	.remove		= __devexit_p(bfin_kpad_remove),
 	.driver		= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
-	}
+	},
+	.probe		= bfin_kpad_probe,
+	.remove		= __devexit_p(bfin_kpad_remove),
+	.suspend	= bfin_kpad_suspend,
+	.resume		= bfin_kpad_resume,
 };
 
 static int __init bfin_kpad_init(void)

index 60931ac..5ece9f5 100644
@@ -370,10 +370,10 @@ static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *
 	if (pnp_irq_valid(dev,0))
 		i8042_pnp_kbd_irq = pnp_irq(dev, 0);
 
-	strncpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name));
+	strlcpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name));
 	if (strlen(pnp_dev_name(dev))) {
-		strncat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name));
-		strncat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
+		strlcat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name));
+		strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
 	}
 
 	i8042_pnp_kbd_devices++;

@@ -391,10 +391,10 @@ static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *
 	if (pnp_irq_valid(dev, 0))
 		i8042_pnp_aux_irq = pnp_irq(dev, 0);
 
-	strncpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name));
+	strlcpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name));
 	if (strlen(pnp_dev_name(dev))) {
-		strncat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name));
-		strncat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
+		strlcat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name));
+		strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
 	}
 
 	i8042_pnp_aux_devices++;

index 8930230..f972ff3 100644
@@ -103,6 +103,9 @@ int mac_hid_mouse_emulate_buttons(int caller, unsigned int keycode, int down)
 	return 0;
 }
 
+static struct lock_class_key emumousebtn_event_class;
+static struct lock_class_key emumousebtn_mutex_class;
+
 static int emumousebtn_input_register(void)
 {
 	int ret;

@@ -111,6 +114,9 @@ static int emumousebtn_input_register(void)
 	if (!emumousebtn)
 		return -ENOMEM;
 
+	lockdep_set_class(emumousebtn->event_lock, &emumousebtn_event_class);
+	lockdep_set_class(emumousebtn->mutex, &emumousebtn_mutex_class);
+
 	emumousebtn->name = "Macintosh mouse button emulation";
 	emumousebtn->id.bustype = BUS_ADB;
 	emumousebtn->id.vendor = 0x0001;