Add the Harris QUAD100HD AMCC 405EP-based board.
A message that is not in the archive (sent off-list or not yet received): mailman.115528.1208956369.5026.u-boot-users@lists.sourceforge.net
PATCH 1/2 Add the Harris QUAD100HD AMCC 405EP-based board.
Hello Gary,
Quoted 12 lines · Gary Jennejohn
Add the Harris QUAD100HD AMCC 405EP-based board.
Signed-off-by Gary Jennejohn <[email protected]>--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/quad100hd/Makefile | 51 ++ board/quad100hd/config.mk | 24 + board/quad100hd/flash.c | 1097 +++++++++++++++++++++++++++++++++++++++++++
Do you really need a boardspecific flash driver? Are these flashes not CFI compatible?
bye
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 1/2 Add the Harris QUAD100HD AMCC 405EP-based board.
Quoted 12 lines · Heiko Schocher
Quoted 11 lines
Add the Harris QUAD100HD AMCC 405EP-based board.
Signed-off-by Gary Jennejohn <[email protected]>--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/quad100hd/Makefile | 51 ++ board/quad100hd/config.mk | 24 + board/quad100hd/flash.c | 1097+++++++++++++++++++++++++++++++++++++++++++
Quoted 2 lines
Do you really need a boardspecific flash driver? Are these flashes not CFI compatible?
Yes, I had the some question in mind. Which FLASH chips are used on the board?
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
PATCH 1/2 Add the Harris QUAD100HD AMCC 405EP-based board.
Quoted 13 lines · On Thu, 24 Apr 2008 08:02:46 +0200 Stefan Roese <[email protected]> wrote:
Quoted 12 lines · Heiko Schocher
Quoted 11 lines
Add the Harris QUAD100HD AMCC 405EP-based board.
Signed-off-by Gary Jennejohn <[email protected]>--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/quad100hd/Makefile | 51 ++ board/quad100hd/config.mk | 24 + board/quad100hd/flash.c | 1097+++++++++++++++++++++++++++++++++++++++++++
Quoted 5 lines
Quoted 2 lines
Do you really need a boardspecific flash driver? Are these flashes not CFI compatible?
Yes, I had the some question in mind. Which FLASH chips are used on the board?
As I told Stefan in a private mail, the board has a S29AL032D on-board.
I guess maybe I got a little confused, becasue the customer stated that this board is based on the taihu, and taihu has its own flash.c. As a result I copied and used the flash.c from taihu. I also partly based the config file (quad100hd.h) on taihu.h.
I'll look into using the generic CFI driver.
---
Gary Jennejohn
*********************************************************************
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
*********************************************************************