Skip to contentSkip to conversation

86xx: mpc8610_hpcd: add support for PCI Express x8 slot

PATCH Applied Anton Vorontsov 2 participants 2 messages Apr 29, 2008 – May 1, 2008

Subsystems (2)
Device tree bindings PowerPC
lore
Share & tools
lore

Anton Vorontsov

author
#0 lore raw

PATCH 1/1 86xx: mpc8610_hpcd: add support for PCI Express x8 slot

This patch adds pcie node which is resposible for PCI-E x8 slot functioning. Though, this was tested using only x1 SKY2 NIC.

Signed-off-by Anton Vorontsov <[email protected]>
---
 arch/powerpc/boot/dts/mpc8610_hpcd.dts |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)
arch/powerpc/boot/dts/mpc8610_hpcd.dts +21 -0
index 1f2f1e0..fff0572 100644
@@ -21,6 +21,7 @@
 		serial1 = &serial1;
 		pci0 = &pci0;
 		pci1 = &pci1;
+		pci2 = &pci2;
 	};
 
 	cpus {

@@ -322,4 +323,24 @@
 			};
 		};
 	};
+
+	pci2: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8641-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0x0000 0 0 1 &mpic 4 1
+				 0x0000 0 0 2 &mpic 5 1
+				 0x0000 0 0 3 &mpic 6 1
+				 0x0000 0 0 4 &mpic 7 1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		clock-frequency = <33333333>;
+	};
 };
Signature · 1 line
1.5.5.1
Applied
#1 lore raw
Quoted 7 lines · Anton Vorontsov

This patch adds pcie node which is resposible for PCI-E x8 slot functioning. Though, this was tested using only x1 SKY2 NIC.

Signed-off-by Anton Vorontsov <[email protected]>

---
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 21 +++++++++++++++++++++

1 files changed, 21 insertions(+), 0 deletions(-)

applied.

- k