Skip to contentSkip to conversation

BIOS bug, APIC version if 0 for CPU#0

DISCUSSION Justin Mattock 5 participants 11 messages Apr 22, 2008 – May 7, 2008

lore
Share & tools
lore
#0 lore raw

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?, also I didnt have a camera handy on me but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.
I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores. I know this is a stupid question but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?
regards;

Signature · 1 line
Justin P. Mattock
#1 lore raw

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Quoted 3 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Quoted 2 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

Quoted 3 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

No it won't.

-Jacek

#2 lore raw
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 6 lines
Quoted 4 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

Quoted 10 lines
Quoted 5 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp. What about x86: PAT support is disabled. how do I enable this option?
regards;

Signature · 1 line
Justin P. Mattock
#3 lore raw
Quoted 35 lines · Justin Mattock
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 2 lines
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

well.. SMP is kindof support for multiple processors, be it in one socket, or multiple sockets.. without SMP you will only be able to use 1 of your X cores.

Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

Quoted 6 lines
Quoted 4 lines

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp.

It is.. but with the limitations outlined above.

Quoted 4 lines

What about x86: PAT
support is disabled. how do I enable this option?
regards;

#4 lore raw
Quoted 39 lines · Kasper Sandberg
Quoted 38 lines · Justin Mattock
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 5 lines
Quoted 4 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

well.. SMP is kindof support for multiple processors, be it in one socket, or multiple sockets.. without SMP you will only be able to use 1 of your X cores.

Yeah disabling smp is not a good idea on a macbook pro, performace is horrible.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

Quoted 13 lines
Quoted 6 lines
Quoted 4 lines

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp.

It is.. but with the limitations outlined above.

Quoted 4 lines

What about x86: PAT
support is disabled. how do I enable this option?
regards;

Thanks for the feedback, well I guess this would be either a regression or a bug. I think the best would be to have somebody else with a macbook pro 15' ati chipset confirm this freezeing as well, before going out and jumping the gun, and filing a bug report. regards;

Signature · 1 line
Justin P. Mattock
#5 lore raw
Quoted 72 lines · Justin Mattock
Quoted 39 lines · Kasper Sandberg
Quoted 38 lines · Justin Mattock
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 5 lines
Quoted 4 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

well.. SMP is kindof support for multiple processors, be it in one socket, or multiple sockets.. without SMP you will only be able to use 1 of your X cores.

Yeah disabling smp is not a good idea on a macbook pro, performace is horrible.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

Quoted 13 lines
Quoted 6 lines
Quoted 4 lines

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp.

It is.. but with the limitations outlined above.

Quoted 4 lines

What about x86: PAT
support is disabled. how do I enable this option?
regards;

Quoted 5 lines

Thanks for the feedback, well I guess this would be either a regression or a bug. I think the best would be to have somebody else with a macbook pro 15' ati chipset confirm this freezeing as well, before going out and jumping the gun, and filing a bug report. regards;

What's the current status of this issue?

Rafael

#6 lore raw
Quoted 79 lines · Rafael J. Wysocki
Quoted 72 lines · Justin Mattock
Quoted 39 lines · Kasper Sandberg
Quoted 38 lines · Justin Mattock
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 5 lines
Quoted 4 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

well.. SMP is kindof support for multiple processors, be it in one socket, or multiple sockets.. without SMP you will only be able to use 1 of your X cores.

Yeah disabling smp is not a good idea on a macbook pro, performace is horrible.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

Quoted 13 lines
Quoted 6 lines
Quoted 4 lines

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp.

It is.. but with the limitations outlined above.

Quoted 4 lines

What about x86: PAT
support is disabled. how do I enable this option?
regards;

Quoted 5 lines

Thanks for the feedback, well I guess this would be either a regression or a bug. I think the best would be to have somebody else with a macbook pro 15' ati chipset confirm this freezeing as well, before going out and jumping the gun, and filing a bug report. regards;

Quoted 4 lines

What's the current status of this issue?

Rafael

Right now I loaded 2.6.26-rc1 and everything seems to be O.K., The freezing was resolved With a patch from peter Zijlstra I think it was called
idle-lockdep-1.patch. From what I can remember this patch was put upstream. regards;

Signature · 1 line
Justin P. Mattock
#7 lore raw
In reply to Rafael J. Wysocki
Quoted 72 lines · Rafael J. Wysocki
Quoted 71 lines · Justin Mattock
Quoted 39 lines · Kasper Sandberg
Quoted 38 lines · Justin Mattock
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 5 lines
Quoted 4 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

well.. SMP is kindof support for multiple processors, be it in one socket, or multiple sockets.. without SMP you will only be able to use 1 of your X cores.

Yeah disabling smp is not a good idea on a macbook pro, performace is horrible.

Quoted 21 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

Quoted 6 lines
Quoted 4 lines

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp.

It is.. but with the limitations outlined above.

Quoted 4 lines

What about x86: PAT
support is disabled. how do I enable this option?
regards;

Quoted 7 lines
Quoted 5 lines

Thanks for the feedback, well I guess this would be either a regression or a bug. I think the best would be to have somebody else with a macbook pro 15' ati chipset confirm this freezeing as well, before going out and jumping the gun, and filing a bug report. regards;

What's the current status of this issue?

I reported this issue too but got ignored .. No one of the x86 maintainer did answer my questions.

http://www.ussg.iu.edu/hypermail/linux/kernel/0805.0/1258.html

However it does not do any bad on my boxes ( so far I can tell ) is just plain annoying and wrong some who since is *only* occurs on 32bit kernels. HW is broken or even isn't.

It seems to me this issue is related to the move of generic_processor_info() and fiends to apic_32.c ( but I'm not really sure ) , all I'm sure about this message was not in 2.6.25 nor in 2.6.24.

Quoted 2 lines

Rafael

Regards,

Gabriel

#8 lore raw
Quoted 92 lines · Gabriel C
Quoted 72 lines · Rafael J. Wysocki
Quoted 71 lines · Justin Mattock
Quoted 39 lines · Kasper Sandberg
Quoted 38 lines · Justin Mattock
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 5 lines
Quoted 4 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

well.. SMP is kindof support for multiple processors, be it in one socket, or multiple sockets.. without SMP you will only be able to use 1 of your X cores.

Yeah disabling smp is not a good idea on a macbook pro, performace is horrible.

Quoted 21 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

Quoted 6 lines
Quoted 4 lines

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp.

It is.. but with the limitations outlined above.

Quoted 4 lines

What about x86: PAT
support is disabled. how do I enable this option?
regards;

Quoted 7 lines
Quoted 5 lines

Thanks for the feedback, well I guess this would be either a regression or a bug. I think the best would be to have somebody else with a macbook pro 15' ati chipset confirm this freezeing as well, before going out and jumping the gun, and filing a bug report. regards;

What's the current status of this issue?

I reported this issue too but got ignored .. No one of the x86 maintainer did answer my questions.

http://www.ussg.iu.edu/hypermail/linux/kernel/0805.0/1258.html

However it does not do any bad on my boxes ( so far I can tell ) is just plain annoying and wrong some who since is *only* occurs on 32bit kernels. HW is broken or even isn't.

It seems to me this issue is related to the move of generic_processor_info() and fiends to apic_32.c ( but I'm not really sure ) , all I'm sure about this message was not in 2.6.25 nor in 2.6.24.

Quoted 1 line
Quoted 7 lines
Quoted 1 line

Rafael

Regards,

Gabriel

Hello; well having something in dmesg give you a BUG signal is a bit worrysome but there is probably a good reason for that there. Probably with all of the other changes going on in the kernel, this would be a temporary solution, until other areas were attended too. who knows;
regards;

Signature · 1 line
Justin P. Mattock
#9 lore raw
In reply to Gabriel C
Quoted 83 lines · Gabriel C
Quoted 72 lines · Rafael J. Wysocki
Quoted 71 lines · Justin Mattock
Quoted 39 lines · Kasper Sandberg
Quoted 38 lines · Justin Mattock
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 5 lines
Quoted 4 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

well.. SMP is kindof support for multiple processors, be it in one socket, or multiple sockets.. without SMP you will only be able to use 1 of your X cores.

Yeah disabling smp is not a good idea on a macbook pro, performace is horrible.

Quoted 21 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

Quoted 6 lines
Quoted 4 lines

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp.

It is.. but with the limitations outlined above.

Quoted 4 lines

What about x86: PAT
support is disabled. how do I enable this option?
regards;

Quoted 7 lines
Quoted 5 lines

Thanks for the feedback, well I guess this would be either a regression or a bug. I think the best would be to have somebody else with a macbook pro 15' ati chipset confirm this freezeing as well, before going out and jumping the gun, and filing a bug report. regards;

What's the current status of this issue?

I reported this issue too but got ignored .. No one of the x86 maintainer did answer my questions.

Quoted 7 lines

http://www.ussg.iu.edu/hypermail/linux/kernel/0805.0/1258.html

However it does not do any bad on my boxes ( so far I can tell ) is just plain annoying and wrong some who since is *only* occurs on 32bit kernels. HW is broken or even isn't.

It seems to me this issue is related to the move of generic_processor_info() and fiends to apic_32.c ( but I'm not really sure ) , all I'm sure about this message was not in 2.6.25 nor in 2.6.24.

It will be listed as http://bugzilla.kernel.org/show_bug.cgi?id=10613.

Please add yourself to the Cc list in there.

Thanks,
Rafael

#10 lore raw
Quoted 92 lines · Rafael J. Wysocki
Quoted 83 lines · Gabriel C
Quoted 72 lines · Rafael J. Wysocki
Quoted 71 lines · Justin Mattock
Quoted 39 lines · Kasper Sandberg
Quoted 38 lines · Justin Mattock
Quoted 12 lines · Jacek Luczak

Hi,

Quoted 8 lines

Hello;
with the latest git on a macbook the system can barely boot without freezing, a work around for me at leat is either disable smp, or once booted turn on glxgears,or compiling the kernel i.g. when using the processors I'm not receiving a freeze, only when everything starts lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the reason for the system freezes?,

Quoted 7 lines

I don't think so. On my machine there's no freezes with latest git and:
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

I've got exactly the same messages.

Are you using a macbook aswell?

Quoted 7 lines
Quoted 5 lines

also I didnt have a camera handy on me
but the screen spit out = Bug spinlock lockup on CPU#0 swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.

Can you try to write down more of those bug messages?

Yeah,

Quoted 5 lines
Quoted 4 lines

I dont have a problem disabling smp, except when I cat /proc/cpuinfo I don't see anything about my cores.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

What exactly you expect to see in /proc/cpuinfp while smp is disabled?

under smp I see cpu cores. disabling smp I dont see cpu cores, under cat /proc/cpuinfo.

well.. SMP is kindof support for multiple processors, be it in one socket, or multiple sockets.. without SMP you will only be able to use 1 of your X cores.

Yeah disabling smp is not a good idea on a macbook pro, performace is horrible.

Quoted 21 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I know this is a stupid question
but will it hurt the system if smp is disabled
for the macbook pro ati chipset.?

Quoted 6 lines
Quoted 4 lines

No it won't.

-Jacek

Cool as long as the system Is o.k. disabling smp.

It is.. but with the limitations outlined above.

Quoted 4 lines

What about x86: PAT
support is disabled. how do I enable this option?
regards;

Quoted 7 lines
Quoted 5 lines

Thanks for the feedback, well I guess this would be either a regression or a bug. I think the best would be to have somebody else with a macbook pro 15' ati chipset confirm this freezeing as well, before going out and jumping the gun, and filing a bug report. regards;

What's the current status of this issue?

I reported this issue too but got ignored .. No one of the x86 maintainer did answer my questions.

Quoted 7 lines

http://www.ussg.iu.edu/hypermail/linux/kernel/0805.0/1258.html

However it does not do any bad on my boxes ( so far I can tell ) is just plain annoying and wrong some who since is *only* occurs on 32bit kernels. HW is broken or even isn't.

It seems to me this issue is related to the move of generic_processor_info() and fiends to apic_32.c ( but I'm not really sure ) , all I'm sure about this message was not in 2.6.25 nor in 2.6.24.

Quoted 7 lines

It will be listed as http://bugzilla.kernel.org/show_bug.cgi?id=10613.

Please add yourself to the Cc list in there.

Thanks,
Rafael

Cool, thanks for informing me. As of now I've decided to revert to 2.6.25-rc9 due to it running smoothly on a macbook pro, and everything working. I'll try a go at a later kernel, whenever ATI decides to add support for fault.
regards;

Signature · 1 line
Justin P. Mattock