Cross compile?
Subsystems (2)
PATCH 1/1 Cross compile?
In util/Makefile, the bin-to-hex utility was being built with the cross-compiler, not the host compiler. This patch fixes that.
util/Makefile renamed from util/Makefile.orig +1 -4
@@ -2,10 +2,7 @@ BIN_TO_HEX:= bin/bin-to-hex $(BIN_TO_HEX): $(srcdir)/util/bin-to-hex.c @$(MKDIR) -p $(@D) - $(LINK.o) -o $@ $^ + $(BUILD_CC) $(BUILD_CFLAGS) -o $@ $< - -$(BIN_TO_HEX): CC=$(BUILD_CC) -$(BIN_TO_HEX): CFLAGS=$(BUILD_CFLAGS) dist += util/Makefile util/bin-to-hex.c clean += util/bin-to-hex.o $(BIN_TO_HEX)
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
David,
Quoted 2 lines
In util/Makefile, the bin-to-hex utility was being built with the cross-compiler, not the host compiler. This patch fixes that.
We set the CC to BUILD_CC for the bin-to-hex target so it should use the host compiler currently.
What are your BUILD_CC, BUILD_CFLAGS and LDFLAGS?
Cheers,
Jeremy
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Quoted 9 lines · Jeremy Kerr
David,
Quoted 2 lines
In util/Makefile, the bin-to-hex utility was being built with the cross-compiler, not the host compiler. This patch fixes that.
We set the CC to
BUILD_CCfor the bin-to-hex target so it should use the host compiler currently.What are your
BUILD_CC,BUILD_CFLAGSand LDFLAGS?
Well, note the patch *does* uses those values--it's just the assignment doesn't work.
Signature · 7 lines
David N. Lombard, Intel, Irvine, CA I do not speak for Intel Corporation; all comments are strictly my own. _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Hi David,
Quoted 2 lines
Well, note the patch *does* uses those values--it's just the assignment doesn't work.
Let's fix the assignment then - it's been working fine here (build = i386-linux, host = powerpc-linux, target = powerpc64-linux), so I'd like to know what's breaking on your system.
What are you using for CC, BUILD_CC and LDFLAGS?
Cheers,
Jeremy
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Quoted 10 lines · Jeremy Kerr
Hi David,
Quoted 2 lines
Well, note the patch *does* uses those values--it's just the assignment doesn't work.
Let's fix the assignment then - it's been working fine here (build = i386-linux, host = powerpc-linux, target = powerpc64-linux), so I'd like to know what's breaking on your system.
What are you using for CC,
BUILD_CCand LDFLAGS?
# Compiler for building kexec
CC = uclibc-gcc CPP = uclibc-gcc -E LD = ld AS = as OBJCOPY = objcopy AR = ar
# C compiler for binaries to run during the build
BUILD_CC = host-gcc BUILD_CFLAGS = -O2 -Wall TARGET_CC = uclibc-gcc TARGET_CFLAGS = -O2 -Wall
Signature · 7 lines
David N. Lombard, Intel, Irvine, CA I do not speak for Intel Corporation; all comments are strictly my own. _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Quoted 9 lines · David N
Quoted 8 lines · Jeremy Kerr
Hi David,
Quoted 2 lines
Well, note the patch *does* uses those values--it's just the assignment doesn't work.
Let's fix the assignment then - it's been working fine here (build = i386-linux, host = powerpc-linux, target = powerpc64-linux), so I'd like to know what's breaking on your system.
More info:
Failure (original):
mkdir -p purgatory
uclibc-gcc --no-undefined -nostartfiles -nostdlib -nodefaultlibs -e purgatory_start -r -o purgatory/purgatory.ro purgatory/purgatory.o purgatory/printf.o purgatory/string.o purgatory/arch/i386/entry32-16.o purgatory/arch/i386/entry32-16-debug.o purgatory/arch/i386/entry32.o purgatory/arch/i386/setup-x86.o purgatory/arch/i386/stack.o purgatory/arch/i386/compat_x86_64.o purgatory/arch/i386/purgatory-x86.o purgatory/arch/i386/console-x86.o purgatory/arch/i386/vga.o purgatory/arch/i386/pic.o purgatory/arch/i386/crashdump_backup.o purgatory/sha256.o
uclibc-gcc -o bin/bin-to-hex util/bin-to-hex.c
mkdir -p kexec
bin/bin-to-hex purgatory < purgatory/purgatory.ro > kexec/purgatory.c
/bin/sh: bin/bin-to-hex: /lib/ld-uClibc.so.0: bad ELF interpreter: No such file or directory
make[1]: *** [kexec/purgatory.c] Error 126
Success (patched):
mkdir -p purgatory
uclibc-gcc --no-undefined -nostartfiles -nostdlib -nodefaultlibs -e purgatory_start -r -o purgatory/purgatory.ro purgatory/purgatory.o purgatory/printf.o purgatory/string.o purgatory/arch/i386/entry32-16.o purgatory/arch/i386/entry32-16-debug.o purgatory/arch/i386/entry32.o purgatory/arch/i386/setup-x86.o purgatory/arch/i386/stack.o purgatory/arch/i386/compat_x86_64.o purgatory/arch/i386/purgatory-x86.o purgatory/arch/i386/console-x86.o purgatory/arch/i386/vga.o purgatory/arch/i386/pic.o purgatory/arch/i386/crashdump_backup.o purgatory/sha256.o host-gcc -O2 -Wall -o bin/bin-to-hex util/bin-to-hex.c
mkdir -p kexec
bin/bin-to-hex purgatory < purgatory/purgatory.ro > kexec/purgatory.c
uclibc-gcc -g -O2 -fno-strict-aliasing -Wall -Wstrict-prototypes -I./include -I./util_lib/include -Iinclude/ -I./kexec/arch/i386/include -c -MD -o kexec/purgatory.o kexec/purgatory.c
Build distro is F7
Using purpose-built gcc-3.4.6 for both uclibc-gcc and host-gcc Make is make-3.81-6.fc7
Signature · 7 lines
David N. Lombard, Intel, Irvine, CA I do not speak for Intel Corporation; all comments are strictly my own. _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Quoted 32 lines · David N
Quoted 9 lines · David N
Quoted 8 lines · Jeremy Kerr
Hi David,
Quoted 2 lines
Well, note the patch *does* uses those values--it's just the assignment doesn't work.
Let's fix the assignment then - it's been working fine here (build = i386-linux, host = powerpc-linux, target = powerpc64-linux), so I'd like to know what's breaking on your system.
More info:
Failure (original):
mkdir -p purgatory
uclibc-gcc --no-undefined -nostartfiles -nostdlib -nodefaultlibs -epurgatory_start-r -o purgatory/purgatory.ropurgatory/purgatory.opurgatory/printf.opurgatory/string.opurgatory/arch/i386/entry32-16.opurgatory/arch/i386/entry32-16-debug.opurgatory/arch/i386/entry32.opurgatory/arch/i386/setup-x86.opurgatory/arch/i386/stack.opurgatory/arch/i386/compat_x86_64.opurgatory/arch/i386/purgatory-x86.opurgatory/arch/i386/console-x86.opurgatory/arch/i386/vga.opurgatory/arch/i386/pic.opurgatory/arch/i386/crashdump_backup.opurgatory/sha256.o
uclibc-gcc -o bin/bin-to-hexutil/bin-to-hex.c
mkdir -p kexec
bin/bin-to-hex purgatory < purgatory/purgatory.ro >kexec/purgatory.c
/bin/sh: bin/bin-to-hex:/lib/ld-uClibc.so.0: bad ELF interpreter: No such file or directory
make[1]: *** [kexec/purgatory.c] Error 126Success (patched):
mkdir -p purgatory
uclibc-gcc --no-undefined -nostartfiles -nostdlib -nodefaultlibs -epurgatory_start-r -o purgatory/purgatory.ropurgatory/purgatory.opurgatory/printf.opurgatory/string.opurgatory/arch/i386/entry32-16.opurgatory/arch/i386/entry32-16-debug.opurgatory/arch/i386/entry32.opurgatory/arch/i386/setup-x86.opurgatory/arch/i386/stack.opurgatory/arch/i386/compat_x86_64.opurgatory/arch/i386/purgatory-x86.opurgatory/arch/i386/console-x86.opurgatory/arch/i386/vga.opurgatory/arch/i386/pic.opurgatory/arch/i386/crashdump_backup.opurgatory/sha256.ohost-gcc -O2 -Wall -o bin/bin-to-hexutil/bin-to-hex.c
mkdir -p kexec
bin/bin-to-hex purgatory < purgatory/purgatory.ro >kexec/purgatory.c
uclibc-gcc -g -O2 -fno-strict-aliasing -Wall -Wstrict-prototypes -I./include -I./util_lib/include -Iinclude/ -I./kexec/arch/i386/include -c -MD -okexec/purgatory.okexec/purgatory.c
Quoted 3 lines
Build distro is F7
Using purpose-built gcc-3.4.6 for both uclibc-gcc and host-gcc Make is make-3.81-6.fc7
Hi David,
I'm a little bit confused about how you are invoking ./configure
Signature · 7 lines
Horms _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Quoted 33 lines · Simon Horman
Quoted 32 lines · David N
Quoted 9 lines · David N
Quoted 8 lines · Jeremy Kerr
Hi David,
Quoted 2 lines
Well, note the patch *does* uses those values--it's just the assignment doesn't work.
Let's fix the assignment then - it's been working fine here (build = i386-linux, host = powerpc-linux, target = powerpc64-linux), so I'd like to know what's breaking on your system.
More info:
Failure (original):
mkdir -p purgatory
uclibc-gcc --no-undefined -nostartfiles -nostdlib -nodefaultlibs -epurgatory_start-r -o purgatory/purgatory.ropurgatory/purgatory.opurgatory/printf.opurgatory/string.opurgatory/arch/i386/entry32-16.opurgatory/arch/i386/entry32-16-debug.opurgatory/arch/i386/entry32.opurgatory/arch/i386/setup-x86.opurgatory/arch/i386/stack.opurgatory/arch/i386/compat_x86_64.opurgatory/arch/i386/purgatory-x86.opurgatory/arch/i386/console-x86.opurgatory/arch/i386/vga.opurgatory/arch/i386/pic.opurgatory/arch/i386/crashdump_backup.opurgatory/sha256.o
uclibc-gcc -o bin/bin-to-hexutil/bin-to-hex.c
mkdir -p kexec
bin/bin-to-hex purgatory < purgatory/purgatory.ro >kexec/purgatory.c
/bin/sh: bin/bin-to-hex:/lib/ld-uClibc.so.0: bad ELF interpreter: No such file or directory
make[1]: *** [kexec/purgatory.c] Error 126Success (patched):
mkdir -p purgatory
uclibc-gcc --no-undefined -nostartfiles -nostdlib -nodefaultlibs -epurgatory_start-r -o purgatory/purgatory.ropurgatory/purgatory.opurgatory/printf.opurgatory/string.opurgatory/arch/i386/entry32-16.opurgatory/arch/i386/entry32-16-debug.opurgatory/arch/i386/entry32.opurgatory/arch/i386/setup-x86.opurgatory/arch/i386/stack.opurgatory/arch/i386/compat_x86_64.opurgatory/arch/i386/purgatory-x86.opurgatory/arch/i386/console-x86.opurgatory/arch/i386/vga.opurgatory/arch/i386/pic.opurgatory/arch/i386/crashdump_backup.opurgatory/sha256.ohost-gcc -O2 -Wall -o bin/bin-to-hexutil/bin-to-hex.c
mkdir -p kexec
bin/bin-to-hex purgatory < purgatory/purgatory.ro >kexec/purgatory.c
uclibc-gcc -g -O2 -fno-strict-aliasing -Wall -Wstrict-prototypes -I./include -I./util_lib/include -Iinclude/ -I./kexec/arch/i386/include -c -MD -okexec/purgatory.okexec/purgatory.c
Quoted 8 lines
Quoted 3 lines
Build distro is F7
Using purpose-built gcc-3.4.6 for both uclibc-gcc and host-gcc Make is make-3.81-6.fc7Hi David,
I'm a little bit confused about how you are invoking ./configure
./configure --build=`uname -m`-linux-uclibc \
--host=`uname -m` --prefix=/home/dnl/kboot-11/root \
CC=uclibc-gcc BUILD_CC=host-gccSignature · 7 lines
David N. Lombard, Intel, Irvine, CA I do not speak for Intel Corporation; all comments are strictly my own. _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Quoted 3 lines · David N
./configure --build=`uname -m`-linux-uclibc \
--host=`uname -m` --prefix=/home/dnl/kboot-11/root \
CC=uclibc-gcc BUILD_CC=host-gccIsn't this backwards? BUILD_CC ought to match --build, and CC ought to match --host. If you wanted a kexec binary to put in a uClibc initramfs, you should set --host for that, not --build. Right?
I've just been looking at git grep -F -w CC to decide which configure flag to use for what, if that helps.
Jamey
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Quoted 9 lines · Jamey Sharp
Quoted 3 lines · David N
./configure --build=`uname -m`-linux-uclibc \ --host=`uname -m` --prefix=/home/dnl/kboot-11/root \ CC=uclibc-gcc BUILD_CC=host-gccIsn't this backwards?
BUILD_CCought to match --build, and CC ought to match --host. If you wanted a kexec binary to put in a uClibc initramfs, you should set --host for that, not --build. Right?
Here's util/Makefile, which wants bin/bin-to-hex to run on the build platform:
BIN_TO_HEX:= bin/bin-to-hex
$(BIN_TO_HEX): $(srcdir)/util/bin-to-hex.c
@$(MKDIR) -p $(@D)
$(LINK.o) -o $@ $^
$(BIN_TO_HEX): CC=$(BUILD_CC)
$(BIN_TO_HEX): CFLAGS=$(BUILD_CFLAGS)
dist += util/Makefile util/bin-to-hex.c
clean += util/bin-to-hex.o $(BIN_TO_HEX)Unless I am mistaken, this uses BUILD_CC and BIULD_CFLAGS for bin/bin-to-hex, which is run on the build platform. I patched that to:
BIN_TO_HEX:= bin/bin-to-hex
$(BIN_TO_HEX): $(srcdir)/util/bin-to-hex.c
@$(MKDIR) -p $(@D)
$(BUILD_CC) $(BUILD_CFLAGS) -o $@ $<
dist += util/Makefile util/bin-to-hex.c
clean += util/bin-to-hex.o $(BIN_TO_HEX)otherwise it used the uClibc-based tools, which cannot run on the current glibc-based platform (F7).
Signature · 7 lines
David N. Lombard, Intel, Irvine, CA I do not speak for Intel Corporation; all comments are strictly my own. _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Hi David,
(sorry about the late reply, been on holidays for the last 3 weeks..)
Quoted 3 lines
./configure --build=`uname -m`-linux-uclibc \
--host=`uname -m` --prefix=/home/dnl/kboot-11/root \
CC=uclibc-gcc BUILD_CC=host-gccAh, there's the problem. You're specifying CC on the configure line, which is overriding it for *everything*. Which is why the CC=$(BUILD_CC) assignment in util/Makefile isn't working for you.
I'll see if I can work out a proper fix...
Also, why are you setting --build to -uclibc?
Cheers,
Jeremy
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Quoted 11 lines · Jeremy Kerr
Hi David,
(sorry about the late reply, been on holidays for the last 3 weeks..)
Quoted 3 lines
./configure --build=`uname -m`-linux-uclibc \ --host=`uname -m` --prefix=/home/dnl/kboot-11/root \ CC=uclibc-gcc BUILD_CC=host-gccAh, there's the problem. You're specifying CC on the configure line, which is overriding it for *everything*. Which is why the CC=$(BUILD_CC) assignment in util/Makefile isn't working for you.
I'm perfectly happy to admit I've horked this...
Quoted 3 lines
I'll see if I can work out a proper fix...
Also, why are you setting --build to -uclibc?
Some of the above came from kboot; everything else is my own fault :)
kexec is being built on a glibc-based x86 for use on a uclibc-based x86.
Signature · 7 lines
David N. Lombard, Intel, Irvine, CA I do not speak for Intel Corporation; all comments are strictly my own. _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec
Quoted 15 lines · David N
Quoted 11 lines · Jeremy Kerr
Hi David,
(sorry about the late reply, been on holidays for the last 3 weeks..)
Quoted 3 lines
./configure --build=`uname -m`-linux-uclibc \ --host=`uname -m` --prefix=/home/dnl/kboot-11/root \ CC=uclibc-gcc BUILD_CC=host-gccAh, there's the problem. You're specifying CC on the configure line, which is overriding it for *everything*. Which is why the CC=$(BUILD_CC) assignment in util/Makefile isn't working for you.
I'm perfectly happy to admit I've horked this...
Quoted 8 lines
Quoted 3 lines
I'll see if I can work out a proper fix...
Also, why are you setting --build to -uclibc?
Some of the above came from kboot; everything else is my own fault :)
kexec is being built on a glibc-based x86 for use on a uclibc-based x86.
I know that this is a bit of a blast from the past, but I believe that this has been fixed by Jeremy.
Signature · 9 lines
Simon Horman VA Linux Systems Japan K.K., Sydney, Australia Satellite Office H: www.vergenet.net/~horms/ W: www.valinux.co.jp/en _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec