git pull/merge master on other branch
Hello,
If I am on a branch (reguarly rebased), I don't want to switch to master branch, but merge origin into master.
If I switch to master and pull and switch to branch, I have to rebuild almost of sources.
How I can pull origin into master without switching to master branch?
Thanks,
namsh
Quoted 9 lines · SungHyun Nam
Hello,
If I am on a branch (reguarly rebased), I don't want to switch to master branch, but merge origin into master.
If I switch to master and pull and switch to branch, I have to rebuild almost of sources.How I can pull origin into master without switching to master branch?
You can't; merging requires use of the working tree (to resolve conflicts).
However, what you can do is make a local clone of your project (cheap, because it just hardlinks files from the original repo), and checkout the master branch in the clone, perform the merge (after having set up the same origin and retrieved its contents), and then fetch (or push) the result back into the original repo (remember: "fetch" instead of "pull", since the latter will initiate a merge with your current branch).
Have fun! :)
...Johan
Signature · 2 lines
Johan Herland, <[email protected]> www.herland.net
Quoted 11 lines · Johan Herland
Quoted 9 lines · SungHyun Nam
Hello,
If I am on a branch (reguarly rebased), I don't want to switch to master branch, but merge origin into master.
If I switch to master and pull and switch to branch, I have to rebuild almost of sources.How I can pull origin into master without switching to master branch?
Quoted 8 lines
You can't; merging requires use of the working tree (to resolve conflicts).
However, what you can do is make a local clone of your project (cheap, because it just hardlinks files from the original repo), and checkout the master branch in the clone, perform the merge (after having set up the same origin and retrieved its contents), and then fetch (or push) the result back into the original repo (remember: "fetch" instead of "pull", since the latter will initiate a merge with your current branch).
If you know the pull will just be a fast-foward, then you can do something like
git fetch origin && git update-ref master origin/master
-Kevin Ballard
Signature · 4 lines
Kevin Ballard http://kevin.sb.org [email protected] http://www.tildesoft.com
Kevin Ballard wrote, at 5/10/2008 2:16 AM:
Quoted 26 lines · Johan Herland
Quoted 15 lines · SungHyun Nam
Quoted 9 lines
Hello,
If I am on a branch (reguarly rebased), I don't want to switch to master branch, but merge origin into master.
If I switch to master and pull and switch to branch, I have to rebuild almost of sources.How I can pull origin into master without switching to master branch?
You can't; merging requires use of the working tree (to resolve conflicts).
Quoted 8 lines
However, what you can do is make a local clone of your project (cheap, because it just hardlinks files from the original repo), and checkout the master branch in the clone, perform the merge (after having set up the same
origin and retrieved its contents), and then fetch (or push) the result back
into the original repo (remember: "fetch" instead of "pull", since the latter will initiate a merge with your current branch).
Quoted 4 lines
If you know the pull will just be a fast-foward, then you can do something like
git fetch origin && git update-ref master origin/master
It seems it worked, but I see a warning message "refname 'master' is ambiguous." Can I fix this warning message?
[test] ~/tmp/t[52]$ git fetch origin
remote: Counting objects: 5, done.
remote: Total 3 (delta 0), reused 0 (delta 0) Unpacking objects: 100% (3/3), done.
From /d/user/namsh/tmp/repo/
6e13bb5..8d1c620 master -> origin/master
[test] ~/tmp/t[53]$ git update-ref master origin/master [test] ~/tmp/t[69]$ git log master
warning: refname 'master' is ambiguous.
commit a358783b78facffb9a8f69d2189aa716495d95ba ..
[test] ~/tmp/t[54]$ git rebase master
warning: refname 'master' is ambiguous.
warning: refname 'master' is ambiguous.
First, rewinding head to replay your work on top of it... Fast-forwarded test to master.
regards,
namsh
Quoted 6 lines · SungHyun Nam
Kevin Ballard wrote, at 5/10/2008 2:16 AM:
Quoted 4 lines
If you know the pull will just be a fast-foward, then you can do something like
git fetch origin && git update-ref master origin/master
I belive that should be update-ref refs/heads/master origin/master, otherwise you'll get this error:
Quoted 2 lines
It seems it worked, but I see a warning message "refname 'master' is ambiguous." Can I fix this warning message?
Try rm .git/master.
--
larsh
Quoted 26 lines · Kevin Ballard
Quoted 14 lines · Johan Herland
Quoted 9 lines · SungHyun Nam
Hello,
If I am on a branch (reguarly rebased), I don't want to switch to master branch, but merge origin into master.
If I switch to master and pull and switch to branch, I have to rebuild almost of sources.How I can pull origin into master without switching to master branch?
You can't; merging requires use of the working tree (to resolve conflicts).
Quoted 8 lines
However, what you can do is make a local clone of your project (cheap, because it just hardlinks files from the original repo), and checkout the master branch in the clone, perform the merge (after having set up the same
origin and retrieved its contents), and then fetch (or push) the result back
into the original repo (remember: "fetch" instead of "pull", since the latter will initiate a merge with your current branch).
Quoted 4 lines
If you know the pull will just be a fast-foward, then you can do something like
git fetch origin && git update-ref master origin/master
I recommend against using update-ref...
and instead suggest using fetch to do all of the work. Some variation of:
git fetch origin master:master
This will only fast-forward the master branch based on the remote origin's master branch. update-ref will blindly overwrite the master ref, if you make a mistake and its not a fast-forward, you just lost some commits.
The above doesn't update your remotes though, maybe the following would be correct, but I haven't tried it.
git fetch origin && git fetch . remotes/origin/master:master
Also, I'm surprised no one mentioned the git-new-workdir script in the contrib directory. It allows you to have multiple work directories which share and update a single repository.
You could
git-new-workdir <path_to_repo> <path_to_newworkdir> master cd <path_to_newworkdir>
git pull
-brandon
Johan Herland wrote, at 5/9/2008 3:24 PM:
Quoted 11 lines · SungHyun Nam
Quoted 9 lines
Hello,
If I am on a branch (reguarly rebased), I don't want to switch to master branch, but merge origin into master.
If I switch to master and pull and switch to branch, I have to rebuild almost of sources.How I can pull origin into master without switching to master branch?
Quoted 8 lines
You can't; merging requires use of the working tree (to resolve conflicts).
However, what you can do is make a local clone of your project (cheap, because it just hardlinks files from the original repo), and checkout the master branch in the clone, perform the merge (after having set up the same origin and retrieved its contents), and then fetch (or push) the result back into the original repo (remember: "fetch" instead of "pull", since the latter will initiate a merge with your current branch).
I tested and it seems work fine.
$ mkdir repo; cd repo; git init; echo 'aaa' > a; git add .; git ci -m 'aaa'; cd .. $ git clone repo t; cd t; git co -b test; cd .. $ cd repo; echo 'bbb' >> a; git ci -m 'bbb' a; cd .. $ git clone t t2; cd t2; git remote add central ../repo; git pull central master; git push origin; cd .. $ cd t; git log; git log master; git rebase master
Did I do correctly?
Thanks,
namsh
Quoted 33 lines · SungHyun Nam
Johan Herland wrote, at 5/9/2008 3:24 PM:
Quoted 14 lines · SungHyun Nam
Quoted 9 lines
Hello,
If I am on a branch (reguarly rebased), I don't want to switch to master branch, but merge origin into master.
If I switch to master and pull and switch to branch, I have to rebuild almost of sources.How I can pull origin into master without switching to master branch?
You can't; merging requires use of the working tree (to resolve conflicts).
Quoted 7 lines
However, what you can do is make a local clone of your project (cheap, because it just hardlinks files from the original repo), and checkout the master branch in the clone, perform the merge (after having set up the same origin and retrieved its contents), and then fetch (or push) the result back into the original repo (remember: "fetch" instead of "pull", since the latter will initiate a merge with your current branch).
I tested and it seems work fine.
$ mkdir repo; cd repo; git init; echo 'aaa' > a; git add .; git ci -m 'aaa'; cd .. $ git clone repo t; cd t; git co -b test; cd .. $ cd repo; echo 'bbb' >> a; git ci -m 'bbb' a; cd .. $ git clone t t2; cd t2; git remote add central ../repo; git pull central master; git push origin; cd .. $ cd t; git log; git log master; git rebase master
Quoted 1 line
Did I do correctly?
Looks good, AFAICS
Have fun! :)
...Johan
Signature · 2 lines
Johan Herland, <[email protected]> www.herland.net
Quoted 6 lines · SungHyun Nam
How I can pull origin into master without switching to master branch?
Thanks,
namsh
To do this, one would use the "push" subcommand, with "." as the repository.
git push . origin/master:master
I could have sworn I answered someone the exact same thing a while ago...
Signature · 1 line
Kelvie Wong