Remove gaps and whitespaces in README file
PATCH 1/1 Remove gaps and whitespaces in README file
Hi,
Remove gaps and whitespaces in README file
Here in my company i cannot use git and hence no git-patch or git-mail. Will see if i can convince them to allow git. sorry till then
Regards
Gururaja
Signed off by: Gururaja Hebbar <[email protected]>
README +20 -20
@@ -180,15 +180,15 @@ Directory Hierarchy: - dtt Digital Thermometer and Thermostat drivers - examples Example code for standalone applications, etc. - include Header Files -- lib_arm Files generic to ARM architecture -- lib_avr32 Files generic to AVR32 architecture -- lib_generic Files generic to all architectures -- lib_i386 Files generic to i386 architecture -- lib_m68k Files generic to m68k architecture -- lib_mips Files generic to MIPS architecture -- lib_nios Files generic to NIOS architecture +- lib_arm Files generic to ARM architecture +- lib_avr32 Files generic to AVR32 architecture +- lib_generic Files generic to all architectures +- lib_i386 Files generic to i386 architecture +- lib_m68k Files generic to m68k architecture +- lib_mips Files generic to MIPS architecture +- lib_nios Files generic to NIOS architecture - lib_ppc Files generic to PowerPC architecture -- lib_sparc Files generic to SPARC architecture +- lib_sparc Files generic to SPARC architecture - libfdt Library files to support flattened device trees - net Networking code - post Power On Self Test
@@ -608,7 +608,7 @@ The following options need to be configu CONFIG_CMD_NAND * NAND support CONFIG_CMD_NET bootp, tftpboot, rarpboot CONFIG_CMD_PCI * pciinfo - CONFIG_CMD_PCMCIA * PCMCIA support + CONFIG_CMD_PCMCIA * PCMCIA support CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network host CONFIG_CMD_PORTIO * Port I/O
@@ -618,7 +618,7 @@ The following options need to be configu CONFIG_CMD_SCSI * SCSI Support CONFIG_CMD_SDRAM * print SDRAM configuration information (requires CONFIG_CMD_I2C) - CONFIG_CMD_SETGETDCR Support for DCR Register access + CONFIG_CMD_SETGETDCR Support for DCR Register access (4xx only) CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_USB * USB support
@@ -1697,14 +1697,14 @@ The following options need to be configu Legacy uImage format: - Arg Where When + Arg Where When 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number + -1 common/cmd_bootm.c Image header has bad magic number 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum + -2 common/cmd_bootm.c Image header has bad checksum 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum - 4 common/cmd_bootm.c Image data has correct checksum + -3 common/cmd_bootm.c Image data has bad checksum + 4 common/cmd_bootm.c Image data has correct checksum -4 common/cmd_bootm.c Image is for unsupported architecture 5 common/cmd_bootm.c Architecture check OK -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi)
@@ -1716,11 +1716,11 @@ Legacy uImage format: -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 9 common/image.c Start initial ramdisk verification - -10 common/image.c Ramdisk header has bad magic number - -11 common/image.c Ramdisk header has bad checksum + -10 common/image.c Ramdisk header has bad magic number + -11 common/image.c Ramdisk header has bad checksum 10 common/image.c Ramdisk header is OK - -12 common/image.c Ramdisk data has bad checksum - 11 common/image.c Ramdisk data has correct checksum + -12 common/image.c Ramdisk data has bad checksum + 11 common/image.c Ramdisk data has correct checksum 12 common/image.c Ramdisk verification complete, start loading -13 common/image.c Wrong Image Type (not PPC Linux Ramdisk) 13 common/image.c Start multifile image verification
@@ -1762,7 +1762,7 @@ Legacy uImage format: 48 common/cmd_ide.c reading Image Header from IDE device OK -49 common/cmd_ide.c Image header has bad magic number 49 common/cmd_ide.c Image header has correct magic number - -50 common/cmd_ide.c Image header has bad checksum + -50 common/cmd_ide.c Image header has bad checksum 50 common/cmd_ide.c Image header has correct checksum -51 common/cmd_ide.c Error reading Image from IDE device 51 common/cmd_ide.c reading Image from IDE device OK
http://www.nabble.com/file/p17336468/uboot-1.3.3-README_remove_whitespace.diff
uboot-1.3.3-README_remove_whitespace.diff
Signature · 2 lines
View this message in context: http://www.nabble.com/-PATCH--Remove-gaps-and-whitespaces-in-README-file-tp17336468p17336468.html Sent from the Uboot - Users mailing list archive at Nabble.com.
PATCH 1/1 Remove gaps and whitespaces in README file
Quoted 2 lines · In message <[email protected]> you wrote:
Remove gaps and whitespaces in README file
Rejected. You corrupt the nice alignment which IMHO makes the code more readable.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If a packet hits a pocket on a socket on a port, And the bus is interrupted as a very last resort, And the address of the memory makes your floppy disk abort, Then the socket packet pocket has an error to report! - Ken Burchill?
PATCH 1/1 Remove gaps and whitespaces in README file
Quoted 4 lines
Quoted 4 lines
Rejected. You corrupt the nice alignment which IMHO makes the code more
readable.
But few corrections in them doesnt break the alignment like the below ones
@ -608,7 +608,7 @@ The following options need to be configu
CONFIG_CMD_NAND * NAND support
CONFIG_CMD_NET bootp, tftpboot, rarpboot
CONFIG_CMD_PCI * pciinfo
- CONFIG_CMD_PCMCIA * PCMCIA support
+ CONFIG_CMD_PCMCIA * PCMCIA support
CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
host
CONFIG_CMD_PORTIO * Port I/O
@@ -618,7 +618,7 @@ The following options need to be configu
CONFIG_CMD_SCSI * SCSI Support
CONFIG_CMD_SDRAM * print SDRAM configuration information
(requires CONFIG_CMD_I2C)
- CONFIG_CMD_SETGETDCR Support for DCR Register access
+ CONFIG_CMD_SETGETDCR Support for DCR Register access
(4xx only)
CONFIG_CMD_SPI * SPI serial bus support
CONFIG_CMD_USB * USB support
@@ -1697,14 +1697,14 @@ The following options need to be configu
Legacy uImage format:
- Arg Where When
+ Arg Where When
1 common/cmd_bootm.c before attempting to boot an image
- -1 common/cmd_bootm.c Image header has bad magic number
+ -1 common/cmd_bootm.c Image header has bad magic number
2 common/cmd_bootm.c Image header has correct magic number
- -2 common/cmd_bootm.c Image header has bad checksum
+ -2 common/cmd_bootm.c Image header has bad checksum
3 common/cmd_bootm.c Image header has correct checksum
- -3 common/cmd_bootm.c Image data has bad checksum
- 4 common/cmd_bootm.c Image data has correct checksum
+ -3 common/cmd_bootm.c Image data has bad checksum
+ 4 common/cmd_bootm.c Image data has correct checksum
-4 common/cmd_bootm.c Image is for unsupported architecture
5 common/cmd_bootm.c Architecture check OK
-5 common/cmd_bootm.c Wrong Image Type (not kernel, multi)
@@ -1716,11 +1716,11 @@ Legacy uImage format:
-9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
9 common/image.c Start initial ramdisk verification
- -10 common/image.c Ramdisk header has bad magic number - -11 common/image.c Ramdisk header has bad checksum + -10 common/image.c Ramdisk header has bad magic number + -11 common/image.c Ramdisk header has bad checksum
10 common/image.c Ramdisk header is OK
- -12 common/image.c Ramdisk data has bad checksum
- 11 common/image.c Ramdisk data has correct checksum
+ -12 common/image.c Ramdisk data has bad checksum
+ 11 common/image.c Ramdisk data has correct checksum
12 common/image.c Ramdisk verification complete, start loading
-13 common/image.c Wrong Image Type (not PPC Linux Ramdisk)
13 common/image.c Start multifile image verification
@@ -1762,7 +1762,7 @@ Legacy uImage format:
48 common/cmd_ide.c reading Image Header from IDE device OK
-49 common/cmd_ide.c Image header has bad magic number
49 common/cmd_ide.c Image header has correct magic number
- -50 common/cmd_ide.c Image header has bad checksum
+ -50 common/cmd_ide.c Image header has bad checksum
50 common/cmd_ide.c Image header has correct checksum
-51 common/cmd_ide.c Error reading Image from IDE device
51 common/cmd_ide.c reading Image from IDE device OK
Regards
Gururaja
Signature · 2 lines
View this message in context: http://www.nabble.com/-PATCH--Remove-gaps-and-whitespaces-in-README-file-tp17336468p17336599.html Sent from the Uboot - Users mailing list archive at Nabble.com.
PATCH 1/1 Remove gaps and whitespaces in README file
Quoted 2 lines · In message <[email protected]> you wrote:
But few corrections in them doesnt break the alignment like the below ones
Yes, they do.
README The following options need to be configu · line 611
Quoted 2 lines
README +1
-1- CONFIG_CMD_PCMCIA * PCMCIA support + CONFIG_CMD_PCMCIA * PCMCIA support
This is OK.
README The following options need to be configu · line 621
Quoted 2 lines
README +1
-1- CONFIG_CMD_SETGETDCR Support for DCR Register access + CONFIG_CMD_SETGETDCR Support for DCR Register access
This is not correct.
README The following options need to be configu · line 1707
Quoted 13 lines
README +5
-5- Arg Where When + Arg Where When 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number + -1 common/cmd_bootm.c Image header has bad magic number 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum + -2 common/cmd_bootm.c Image header has bad checksum 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum - 4 common/cmd_bootm.c Image data has correct checksum + -3 common/cmd_bootm.c Image data has bad checksum + 4 common/cmd_bootm.c Image data has correct checksum
And these and the following destroy the intended alignment.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Lispers are among the best grads of the Sweep-It-Under-Someone- Else's-Carpet School of Simulated Simplicity. [Was that sufficiently incendiary? :-)] - Larry Wall in <[email protected]