Skip to contentSkip to conversation

pppd and 2.6.25 serial driver

DISCUSSION Chris Vine 3 participants 5 messages Jun 1, 2008 – Jun 7, 2008

lore
Share & tools
lore

Chris Vine

author
#0 lore raw

Because I have had to resort to using dial-up this weekend, I noticed that the serial driver for the 8250/16550 UART in the 2.6.25 kernel does not work correctly with ppp-2.4.4. After establishing a dial-up modem connection it becomes unresponsive and pppd will exit waiting to establish a ppp connection after sending LCP configuration requests. I have tested this with two different dial-up modems and at two different dial-up providers, with the 2.6.25.3 and 2.6.25.4 kernels.

pppd works fine with the 2.6.25 kernel if the serial driver is not used (for example if establishing a ppp connection over (in kernel) ATM or via an (out of kernel tree) softmodem driver I have.

The serial driver in 2.6.24.7 works correctly, and the good news is that 2.6.26-rc2 also works fine.

Chris

#1 lore raw
Quoted 8 lines · On Sun, 1 Jun 2008 21:56:21 +0100 Chris Vine <[email protected]>…

Because I have had to resort to using dial-up this weekend, I noticed that the serial driver for the 8250/16550 UART in the 2.6.25 kernel does not work correctly with ppp-2.4.4. After establishing a dial-up modem connection it becomes unresponsive and pppd will exit waiting to establish a ppp connection after sending LCP configuration requests. I have tested this with two different dial-up modems and at two different dial-up providers, with the 2.6.25.3 and 2.6.25.4 kernels.

Quoted 7 lines

pppd works fine with the 2.6.25 kernel if the serial driver is not used (for example if establishing a ppp connection over (in kernel) ATM or via an (out of kernel tree) softmodem driver I have.

The serial driver in 2.6.24.7 works correctly, and the good news is that 2.6.26-rc2 also works fine.

Fun. Presumably that means there's some serial fix which we forgot to backport. Or it isn't in 2.6.25.x yet.

#2 lore raw
Quoted 6 lines
Quoted 3 lines

The serial driver in 2.6.24.7 works correctly, and the good news is that 2.6.26-rc2 also works fine.

Fun. Presumably that means there's some serial fix which we forgot to backport. Or it isn't in 2.6.25.x yet.

No relevant changes, and the 2.6.26 stuff isn't a trivial backport or relevant either that I can see. Also it seems to work for everyone else which makes me suspicious.

Alan

author
#3 lore raw
Quoted 3 lines · On Fri, 6 Jun 2008 11:09:28 +0100 Alan Cox <[email protected]> wrote:

No relevant changes, and the 2.6.26 stuff isn't a trivial backport or relevant either that I can see. Also it seems to work for everyone else which makes me suspicious.

Who uses internet dial-up these days? However, it could be something odd about my hardware, which is a laptop using via chipsets, but it is also ppp specific, as I can receive faxes with a fax modem using the 2.6.25 serial driver.

Anyway, I have checked with the serial driver in the latest 2.6.26 (2.6.26-rc5) and that still works fine with ppp.

Chris

#4 lore raw
Quoted 1 line

Who uses internet dial-up these days? However, it could be something

Quite a lot of people, especially outside the UK.

Quoted 6 lines

odd about my hardware, which is a laptop using via chipsets, but it is also ppp specific, as I can receive faxes with a fax modem using the 2.6.25 serial driver.

Anyway, I have checked with the serial driver in the latest 2.6.26 (2.6.26-rc5) and that still works fine with ppp.

Good to know.