Skip to contentSkip to conversation

opti621: remove DMA support

PATCH In review Bartlomiej Zolnierkiewicz 2 participants 2 messages Jun 11, 2008 libata

lore
Share & tools
lore

Bartlomiej Zolnierkiewicz

author
#0 lore raw

PATCH 2/6 opti621: remove DMA support

These controllers don't support DMA.

Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code.

Tested-by Juergen Kosel <[email protected]>
Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>
---
 drivers/ide/pci/opti621.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/ide/pci/opti621.c +2 -6
Index: b/drivers/ide/pci/opti621.c
===================================================================
@@ -324,18 +324,14 @@ static const struct ide_port_info opti62
 		.name		= "OPTI621",
 		.enablebits	= { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
 		.port_ops	= &opti621_port_ops,
-		.host_flags	= IDE_HFLAG_TRUST_BIOS_FOR_DMA,
+		.host_flags	= IDE_HFLAG_NO_DMA,
 		.pio_mask	= ATA_PIO3,
-		.swdma_mask	= ATA_SWDMA2,
-		.mwdma_mask	= ATA_MWDMA2,
 	}, {	/* 1 */
 		.name		= "OPTI621X",
 		.enablebits	= { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
 		.port_ops	= &opti621_port_ops,
-		.host_flags	= IDE_HFLAG_TRUST_BIOS_FOR_DMA,
+		.host_flags	= IDE_HFLAG_NO_DMA,
 		.pio_mask	= ATA_PIO3,
-		.swdma_mask	= ATA_SWDMA2,
-		.mwdma_mask	= ATA_MWDMA2,
 	}
 };