Avermedia HC82 express card

Hi

I recently got a new laptop and this express card was included in the package. I'm interested in support for it in Linux, although given I didn't ask for it, I won't be too miffed if it cannot yet be supported.
I think the main problem is getting the firmware...

Here is what I can gather...

Plugging the express card in (after "pciehp pciehp_force=1") shows:

==> /var/log/syslog <==

Jun 11 23:14:02 box kernel: [34224.509805] pciehp: Card present on 

Slot(0013_0005)

==> /var/log/messages <==

Jun 11 23:14:03 box kernel: [34225.206518] program_fw_provided_values: Could 

not get hotplug parameters

Windows shows the card details as:
Avermedia HC82 Express-Card Hybrid Analog

Output of lspci -vvnn

0d:00.0 Multimedia controller [0480]: Philips Semiconductors Unknown device [1131:7160] (rev 03)
Subsystem: Avermedia Technologies Inc Unknown device [1461:0555]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at f9c00000 (64-bit, non-prefetchable) [disabled]
[size=1M]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+
Queue=0/5 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <256ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information

Installing the driver from Dell
(http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R175809&formatcnt=1&libid=0&fileid=239014)
in Windows gives the following files, that look like drivers. Are their any others that could be candidates ?

AVerBDA716x.sys
MV716.ax

The question then is how can the firmware be installed in linux ? I've read the linux-dvb wiki but am still unsure.

Any help appreciated..

Thanks
James

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb