Names for ALSA controls
Hi,
when I register these mixer controls:
Line Playback Switch
Line Playback Route
Mono Playback Switch
Mono Playback Route
Phone Playback Switch
Phone Playback Route
Headphone Playback Switch
Headphone Playback Route
PCM Playback Switch
PCM Playback Volume
Line Bypass Capture Switch
Line Bypass Capture Volume
ADC Capture Route
Running "alsamixer" fails with:
ALSA lib simple_none.c:1218:(simple_add1) helem (MIXER,'Headphone Playback Switch',0,0,0) appears twice or more
It seems there are restrictions what kind of control name I can use for each control, but what restrictions? Are there better names for my output amplifiers? Each of it I can enable/disable (-> Switch) and select a source (-> Route) independently.
Regards,
Juergen
Signature · 5 lines
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Vertretung Sued/Muenchen, Germany Phone: +49-8766-939 228 | Fax: +49-5121-206917-9
At Thu, 12 Jun 2008 11:58:19 +0200,
Quoted 19 lines · Juergen Beisert
Hi,
when I register these mixer controls:
Line Playback Switch
Line Playback Route
Mono Playback Switch
Mono Playback Route
Phone Playback Switch
Phone Playback Route
Headphone Playback Switch
Headphone Playback Route
PCM Playback Switch
PCM Playback Volume
Line Bypass Capture Switch
Line Bypass Capture Volume
ADC Capture Route
Quoted 8 lines
Running "alsamixer" fails with:
ALSA lib simple_none.c:1218:(simple_add1) helem (MIXER,'Headphone Playback Switch',0,0,0) appears twice or more
It seems there are restrictions what kind of control name I can use for each control, but what restrictions? Are there better names for my output amplifiers? Each of it I can enable/disable (-> Switch) and select a source (-> Route) independently.
You can use "xxx Source" instead of "xxx Route", I guess, as a workaround.
Takashi
Quoted 25 lines · Takashi Iwai
At Thu, 12 Jun 2008 11:58:19 +0200,
Quoted 23 lines · Juergen Beisert
Hi,
when I register these mixer controls:
Line Playback Switch
Line Playback Route
Mono Playback Switch
Mono Playback Route
Phone Playback Switch
Phone Playback Route
Headphone Playback Switch
Headphone Playback Route
PCM Playback Switch
PCM Playback Volume
Line Bypass Capture Switch
Line Bypass Capture Volume
ADC Capture RouteRunning "alsamixer" fails with:
ALSA lib simple_none.c:1218:(simple_add1) helem (MIXER,'Headphone
Playback Switch',0,0,0) appears twice or more
Quoted 7 lines
Quoted 4 lines
It seems there are restrictions what kind of control name I can use for each control, but what restrictions? Are there better names for my output amplifiers? Each of it I can enable/disable (-> Switch) and select a source (-> Route) independently.
You can use "xxx Source" instead of "xxx Route", I guess, as a workaround.
I changed my controls to a single enumerated type instead of a switch and route. Now with shown words like "Off", "Source1", "Source2" its easier to understand, what this control does. Thanks for your hint.
Juergen
Signature · 5 lines
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Vertretung Sued/Muenchen, Germany Phone: +49-8766-939 228 | Fax: +49-5121-206917-9