Skip to contentSkip to conversation

ide-pmac: add ->init_dev method (take 2)

PATCH In review Bartlomiej Zolnierkiewicz 2 participants 3 messages Jun 16, 2008 – Jun 17, 2008

Subsystems (2)
PowerPC libata
lore
Share & tools
lore

Bartlomiej Zolnierkiewicz

author
#0 lore raw

PATCH 3/4 ide-pmac: add ->init_dev method (take 2)

v2:
* Build fix from Stephen Rothwell.

There should be no functional changes caused by this patch.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Stephen Rothwell <[email protected]>
Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>

---
replacement patch

 drivers/ide/ppc/pmac.c |   27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)
drivers/ide/ppc/pmac.c +18 -9
Index: b/drivers/ide/ppc/pmac.c
===================================================================
@@ -941,7 +941,23 @@ static u8 pmac_ide_cable_detect(ide_hwif
 	return ATA_CBL_PATA40;
 }
 
+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
+
+	if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+		if (check_media_bay(np->parent, MB_CD) == -ENODEV)
+			return;
+#endif
+		drive->noprobe = 1;
+	}
+}
+
 static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_kauai_selectproc,

@@ -949,6 +965,7 @@ static const struct ide_port_ops pmac_id
 };
 
 static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_selectproc,

@@ -956,6 +973,7 @@ static const struct ide_port_ops pmac_id
 };
 
 static const struct ide_port_ops pmac_ide_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_selectproc,

@@ -1065,15 +1083,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
 	       hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
 	       pmif->mediabay ? " (mediabay)" : "", hwif->irq);
 
-	if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
-		if (check_media_bay(np->parent, MB_CD) == -ENODEV)
-			break;
-#endif
-		hwif->drives[0].noprobe = 1;
-		hwif->drives[1].noprobe = 1;
-	}
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &d);
#1 lore raw

Hi Bart,

drivers/ide/ppc/pmac.c static u8 pmac_ide_cable_detect(ide_hwif · line 952

Quoted 10 lines · On Mon, 16 Jun 2008 21:24:47 +0200 Bartlomiej Zolnierkiewicz…
drivers/ide/ppc/pmac.c +9 -0
+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
+
+	if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+		if (check_media_bay(np->parent, MB_CD) == -ENODEV)

                                    ^^

"np" doesn't exist here.

Signature · 3 lines
Cheers,
Stephen Rothwell                    [email protected]
http://www.canb.auug.org.au/~sfr/
author
#2 lore raw
Quoted 14 lines · Stephen Rothwell

Hi Bart,

Review

Quoted 10 lines · On Mon, 16 Jun 2008 21:24:47 +0200 Bartlomiej Zolnierkiewicz…
(quoted diff) +9 -0
+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
+
+	if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+		if (check_media_bay(np->parent, MB_CD) == -ENODEV)

                                    ^^
Quoted 1 line

"np" doesn't exist here.

uh, it should be pmif->node there... take 3...

From: Bartlomiej Zolnierkiewicz <[email protected]>
Subject: [PATCH] ide-pmac: add ->init_dev method (take 3)

v2/3:
* Build fixes from Stephen Rothwell.

There should be no functional changes caused by this patch.

Cc Benjamin Herrenschmidt <[email protected]>
Cc Stephen Rothwell <[email protected]>
Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>
---
 drivers/ide/ppc/pmac.c |   27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)
drivers/ide/ppc/pmac.c +18 -9
Index: b/drivers/ide/ppc/pmac.c
===================================================================
@@ -941,7 +941,23 @@ static u8 pmac_ide_cable_detect(ide_hwif
 	return ATA_CBL_PATA40;
 }
 
+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
+
+	if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+		if (check_media_bay(pmif->node->parent, MB_CD) == -ENODEV)
+			return;
+#endif
+		drive->noprobe = 1;
+	}
+}
+
 static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_kauai_selectproc,

@@ -949,6 +965,7 @@ static const struct ide_port_ops pmac_id
 };
 
 static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_selectproc,

@@ -956,6 +973,7 @@ static const struct ide_port_ops pmac_id
 };
 
 static const struct ide_port_ops pmac_ide_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_selectproc,

@@ -1065,15 +1083,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
 	       hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
 	       pmif->mediabay ? " (mediabay)" : "", hwif->irq);
 
-	if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
-		if (check_media_bay(np->parent, MB_CD) == -ENODEV)
-			break;
-#endif
-		hwif->drives[0].noprobe = 1;
-		hwif->drives[1].noprobe = 1;
-	}
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &d);