Skip to contentSkip to conversation

hwmon updates vs. v2.6.26-rc6

PATCH In review Mark M. Hoffman 3 participants 6 messages Jun 19, 2008 – Jun 22, 2008

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hwmon updates vs. v2.6.26-rc6

Hi Linus:

Please pull from:
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6.git release

You'll get a few bugfixes, a couple of updates to abituguru3, and a couple of documentation updates.

Hopefully this is the last you'll hear from me before 2.6.26 final.

Thanks & regards,

 Documentation/hwmon/sysfs-interface |   33 +++++++++++++--------------------
 MAINTAINERS                         |    6 +++---
 drivers/hwmon/abituguru3.c          |   18 +++++++++++++++---
 drivers/hwmon/adt7473.c             |    3 +++
 drivers/hwmon/lm75.c                |   20 +++++++++++++++-----
 drivers/hwmon/lm85.c                |   25 +++++++++++--------------
 6 files changed, 60 insertions(+), 45 deletions(-)

David Brownell (1):
hwmon: (lm75) sensor reading bugfix

Hans de Goede (2):
hwmon: (abituguru3) Identify Abit AW8D board as such
hwmon: (abituguru3) update driver detection

Jean Delvare (3):
hwmon: (lm85) Fix function RANGE_TO_REG()
hwmon: (adt7473) Initialize max_duty_at_overheat before use
hwmon: Update the sysfs interface documentation

Marc Hulsman (1):

      hwmon: (w83791d) new maintainer
Signature · 2 lines
Mark M. Hoffman
[email protected]
#2 lore raw

Hi Linus:

Quoted 4 lines · Linus Torvalds
Quoted 1 line · Mark M. Hoffman
Quoted 8 lines
Quoted 2 lines

Please pull from:
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6.git release

I'm just getting:

fatal: Unable to look up lm-sensors.org (port 9418) (Temporary failure in name resolution)

do you have DNS problems?

Sorry, yes. I've already sent email to the site admin some hours ago. If it doesn't work itself out quickly (within next 24 hours) I'll just send you the patches directly.

Thanks & regards,

Signature · 2 lines
Mark M. Hoffman
[email protected]
#3 lore raw

Hi Linus:

Quoted 12 lines · Mark M. Hoffman

Hi Linus:

Quoted 9 lines · Linus Torvalds
Quoted 3 lines · Mark M. Hoffman

Please pull from:
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6.git release

I'm just getting:

Quoted 7 lines
Quoted 3 lines

fatal: Unable to look up lm-sensors.org (port 9418) (Temporary failure in name resolution)

do you have DNS problems?

Sorry, yes. I've already sent email to the site admin some hours ago. If it doesn't work itself out quickly (within next 24 hours) I'll just send you the patches directly.

Still down... so I've attached a git bundle (to preserve history).

I did this in my public repo:

	$ git bundle create ~/hwmon-release-bundle release ^v2.6.26-rc6

(yes, that tag is the base for my release branch)

As a smoke test, I did the following in a fresh-cloned repo locally:

	$ git bundle verify ~/hwmon-release-bundle
	$ git pull ~/hwmon-release-bundle refs/heads/release

Looks like it DTRT, so here you go...

Thanks & regards,

Signature · 2 lines
Mark M. Hoffman
[email protected]

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#4 lore raw
Quoted 2 lines · Mark M. Hoffman

Still down... so I've attached a git bundle (to preserve history).

Thanks, that works for me. I don't much like bundles for normal work, but for cases like this it's convenient. I faked out the commit message to look like it was done the traditional way and lm-sensors was still up..

Linus

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#5 lore raw
In reply to Linus Torvalds
Quoted 7 lines · Linus Torvalds
Quoted 3 lines · Mark M. Hoffman

Please pull from:
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6.git release

Quoted 6 lines

I'm just getting:

fatal: Unable to look up lm-sensors.org (port 9418) (Temporary
failure in name resolution)

do you have DNS problems?

Yes, we had to change the root DNS servers for the domain. That was done today at 12:15PM Pacific time. It's working fine for me now, but propagation times very as you know.

Phil

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors