Skip to contentSkip to conversation

sdhci: add quirk for the Marvell CaFe's vdd/powerup issue

OLPC Andres Salomon 3 participants 4 messages Jun 22, 2008 – Jul 1, 2008

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

This has been sitting around unloved for way too long..

The Marvell CaFe chip's SD implementation chokes during card insertion if one attempts to set the voltage and power up in the same SDHCI_POWER_CONTROL register write. This adds a quirk that does that particular dance in two steps.

It also adds an entry to pci_ids.h for the CaFe chip's SD device.

---
 drivers/mmc/host/sdhci.c |   18 ++++++++++++++++++
 include/linux/pci_ids.h  |    1 +
 2 files changed, 19 insertions(+), 0 deletions(-)
drivers/mmc/host/sdhci.c +18 -0
index 07c2048..5b74c8c 100644
@@ -55,6 +55,8 @@ static unsigned int debug_quirks = 0;
 #define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<7)
 /* Controller needs to be reset after each request to stay stable */
 #define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<8)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<9)
 
 static const struct pci_device_id pci_ids[] __devinitdata = {
 	{
@@ -128,6 +130,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 	},
 
 	{
+		.vendor         = PCI_VENDOR_ID_MARVELL,
+		.device         = PCI_DEVICE_ID_MARVELL_CAFE_SD,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.driver_data    = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER,
+	},
+
+	{
 		.vendor         = PCI_VENDOR_ID_JMICRON,
 		.device         = PCI_DEVICE_ID_JMICRON_JMB38X_SD,
 		.subvendor      = PCI_ANY_ID,
@@ -774,6 +784,14 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 		BUG();
 	}
 
+	/*
+	 * At least the CaFe chip gets confused if we set the voltage
+	 * and set turn on power at the same time, so set the voltage first.
+	 */
+	if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+		writeb(pwr & ~SDHCI_POWER_ON,
+				host->ioaddr + SDHCI_POWER_CONTROL);
+
 	writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
 
 out:
include/linux/pci_ids.h +1 -0
index eafc9d6..6595382 100644
@@ -1520,6 +1520,7 @@
 #define PCI_DEVICE_ID_MARVELL_GT64260	0x6430
 #define PCI_DEVICE_ID_MARVELL_MV64360	0x6460
 #define PCI_DEVICE_ID_MARVELL_MV64460	0x6480
+#define PCI_DEVICE_ID_MARVELL_CAFE_SD	0x4101
 
 #define PCI_VENDOR_ID_V3		0x11b0
 #define PCI_DEVICE_ID_V3_V960		0x0001
Signature · 1 line
1.5.5.3
#1 lore raw
Quoted 11 lines · On Sat, 21 Jun 2008 21:15:16 -0400 Andres Salomon <[email protected]> wrote:

This has been sitting around unloved for way too long..

The Marvell CaFe chip's SD implementation chokes during card insertion if one attempts to set the voltage and power up in the same SDHCI_POWER_CONTROL register write. This adds a quirk that does that particular dance in two steps.

It also adds an entry to pci_ids.h for the CaFe chip's SD device.

---

Looks ok, but please try to diff against my -next branch. The sdhci driver has been split up into a core and PCI part.

drivers/mmc/host/sdhci.c static void sdhci_set_power(struct sdhci_host *host, unsigned short power) · line 790

Quoted 8 lines
drivers/mmc/host/sdhci.c +4 -0
@@ -774,6 +784,14 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 		BUG();
 	}
 
+	/*
+	 * At least the CaFe chip gets confused if we set the voltage
+	 * and set turn on power at the same time, so set the voltage first.
+	 */

This comment should probably say "Marvell controller" or something like that. Few know of the CaFE name.

Signature · 6 lines
     -- Pierre Ossman

  WARNING: This correspondence is being monitored by the
  Swedish government. Make sure your server uses encryption
  for SMTP traffic and consider using PGP for end-to-end
  encryption.
#2 lore raw
Quoted 2 lines · Pierre Ossman

This comment should probably say "Marvell controller" or something like that. Few know of the CaFE name.

Marvell named CaFE the 88ALP01:

http://www.marvell.com/products/pcconn/88ALP01.jsp

But the driver for the webcam part of the chip names it both cafe and 88ALP01:

drivers/media/video/cafe_ccic.c

FWIW, CaFE is easier to say and remember :)

Joel

#3 lore raw

On Sun, 29 Jun 2008 02:32:38 +0930
"Joel Stanley" <[email protected]> wrote:
[...]

Quoted 4 lines

FWIW, CaFE is easier to say and remember :)

Joel

Indeed, and that's why I've been using it. I have yet to hear anyone (who isn't reading off the data sheet) call it the"88alp01".