Skip to contentSkip to conversation

2.6.26-rc2 WARNING from usb-serial, and then my gps is dead

DISCUSSION Helge Hafting 3 participants 7 messages Jun 22, 2008 – Jul 2, 2008

lore
Share & tools
lore
#0 lore raw

This is what I got:

------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 [usbserial]()
Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix iTCO_wdt ata_generic bay hci_usb intel_agp

Pid: 10, comm: events/1 Tainted: G W 2.6.26-rc2-hh1 #1

Call Trace:
 [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
 [<ffffffff8022c207>] __wake_up+0x38/0x4f
 [<ffffffff8024565c>] __queue_work+0x23/0x33
 [<ffffffff802456c8>] queue_work+0x37/0x40
 [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
 [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
 [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
 [<ffffffff803ad3ca>] echo_char+0x47/0x60
 [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
 [<ffffffff8020a87e>] __switch_to+0xa2/0x396
 [<ffffffff8023028d>] hrtick_set+0x88/0xf6
 [<ffffffff80590b44>] thread_return+0x70/0xb4
 [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
 [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
 [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
 [<ffffffff8024520b>] run_workqueue+0x80/0x112
 [<ffffffff80245afe>] worker_thread+0xd9/0xe8
 [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80245a25>] worker_thread+0x0/0xe8
 [<ffffffff80248264>] kthread+0x47/0x73
 [<ffffffff802318c1>] schedule_tail+0x28/0x5d
 [<ffffffff8020cf88>] child_rip+0xa/0x12
 [<ffffffff8024821d>] kthread+0x0/0x73
 [<ffffffff8020cf7e>] child_rip+0x0/0x12

---[ end trace 656e180042992f9e ]---

I looked at the dmesg log because I have had lots of trouble with my gps lately. I first suspected the cable, but then I saw this.

After this, I have to restart gpsd, and perhaps replug the cable to get things going again. Until it happens again. This is a 64-bit dualcore laptop.

Helge Hafting

#1 lore raw
Quoted 35 lines · Helge Hafting

This is what I got:

------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
[usbserial]()
Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix 

iTCO_wdt ata_generic bay hci_usb intel_agp
Pid: 10, comm: events/1 Tainted: G W 2.6.26-rc2-hh1 #1

Call Trace:
 [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
 [<ffffffff8022c207>] __wake_up+0x38/0x4f
 [<ffffffff8024565c>] __queue_work+0x23/0x33
 [<ffffffff802456c8>] queue_work+0x37/0x40
 [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
 [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
 [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
 [<ffffffff803ad3ca>] echo_char+0x47/0x60
 [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
 [<ffffffff8020a87e>] __switch_to+0xa2/0x396
 [<ffffffff8023028d>] hrtick_set+0x88/0xf6
 [<ffffffff80590b44>] thread_return+0x70/0xb4
 [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
 [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
 [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
 [<ffffffff8024520b>] run_workqueue+0x80/0x112
 [<ffffffff80245afe>] worker_thread+0xd9/0xe8
 [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80245a25>] worker_thread+0x0/0xe8
 [<ffffffff80248264>] kthread+0x47/0x73
 [<ffffffff802318c1>] schedule_tail+0x28/0x5d
 [<ffffffff8020cf88>] child_rip+0xa/0x12
 [<ffffffff8024821d>] kthread+0x0/0x73
 [<ffffffff8020cf7e>] child_rip+0x0/0x12

---[ end trace 656e180042992f9e ]---
Quoted 6 lines

I looked at the dmesg log because I have had lots of trouble with my gps lately. I first suspected the cable, but then I saw this.

After this, I have to restart gpsd, and perhaps replug the cable to get things going again. Until it happens again. This is a 64-bit dualcore laptop.

Ick, that's not nice.

Can you enable debugging for the usb-serial core:
echo 1 > /sys/module/usbserial/parameters/debug

and then run whatever program you were running that causes this warning and then send us the kernel log?

thanks,

greg k-h

#2 lore raw
Quoted 43 lines · On Sun, 22 Jun 2008 11:42:53 -0700 Greg KH <[email protected]> wrote:
Quoted 35 lines · Helge Hafting

This is what I got:

------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
[usbserial]()
Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix 

iTCO_wdt ata_generic bay hci_usb intel_agp
Pid: 10, comm: events/1 Tainted: G W 2.6.26-rc2-hh1 #1

Call Trace:
 [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
 [<ffffffff8022c207>] __wake_up+0x38/0x4f
 [<ffffffff8024565c>] __queue_work+0x23/0x33
 [<ffffffff802456c8>] queue_work+0x37/0x40
 [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
 [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
 [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
 [<ffffffff803ad3ca>] echo_char+0x47/0x60
 [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
 [<ffffffff8020a87e>] __switch_to+0xa2/0x396
 [<ffffffff8023028d>] hrtick_set+0x88/0xf6
 [<ffffffff80590b44>] thread_return+0x70/0xb4
 [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
 [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
 [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
 [<ffffffff8024520b>] run_workqueue+0x80/0x112
 [<ffffffff80245afe>] worker_thread+0xd9/0xe8
 [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80245a25>] worker_thread+0x0/0xe8
 [<ffffffff80248264>] kthread+0x47/0x73
 [<ffffffff802318c1>] schedule_tail+0x28/0x5d
 [<ffffffff8020cf88>] child_rip+0xa/0x12
 [<ffffffff8024821d>] kthread+0x0/0x73
 [<ffffffff8020cf7e>] child_rip+0x0/0x12

---[ end trace 656e180042992f9e ]---
Quoted 6 lines

I looked at the dmesg log because I have had lots of trouble with my gps lately. I first suspected the cable, but then I saw this.

After this, I have to restart gpsd, and perhaps replug the cable to get things going again. Until it happens again. This is a 64-bit dualcore laptop.

Quoted 8 lines

Ick, that's not nice.

Can you enable debugging for the usb-serial core:
echo 1 > /sys/module/usbserial/parameters/debug

and then run whatever program you were running that causes this warning and then send us the kernel log?

Also, lots of things have been fixed since 2.6.26-rc2 - there might be benefit in retesting 2.6.26-rc7.

And can you tell us whether this is new behaviour? Was 2.6.25 OK?

Thanks.

#3 lore raw
Quoted 38 lines · Andrew Morton
Quoted 36 lines · On Sun, 22 Jun 2008 11:42:53 -0700 Greg KH <[email protected]> wrote:
Quoted 35 lines · Helge Hafting

This is what I got:

------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 [usbserial]()
Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix iTCO_wdt ata_generic bay hci_usb intel_agp

Pid: 10, comm: events/1 Tainted: G W 2.6.26-rc2-hh1 #1

Call Trace:
 [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
 [<ffffffff8022c207>] __wake_up+0x38/0x4f
 [<ffffffff8024565c>] __queue_work+0x23/0x33
 [<ffffffff802456c8>] queue_work+0x37/0x40
 [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
 [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
 [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
 [<ffffffff803ad3ca>] echo_char+0x47/0x60
 [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
 [<ffffffff8020a87e>] __switch_to+0xa2/0x396
 [<ffffffff8023028d>] hrtick_set+0x88/0xf6
 [<ffffffff80590b44>] thread_return+0x70/0xb4
 [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
 [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
 [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
 [<ffffffff8024520b>] run_workqueue+0x80/0x112
 [<ffffffff80245afe>] worker_thread+0xd9/0xe8
 [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80245a25>] worker_thread+0x0/0xe8
 [<ffffffff80248264>] kthread+0x47/0x73
 [<ffffffff802318c1>] schedule_tail+0x28/0x5d
 [<ffffffff8020cf88>] child_rip+0xa/0x12
 [<ffffffff8024821d>] kthread+0x0/0x73
 [<ffffffff8020cf7e>] child_rip+0x0/0x12

---[ end trace 656e180042992f9e ]---

I looked at the dmesg log because I have had lots of trouble with my gps lately. I first suspected the cable, but then I saw this.

Quoted 6 lines
Quoted 6 lines
Quoted 2 lines

After this, I have to restart gpsd, and perhaps replug the cable to get things going again. Until it happens again. This is a 64-bit dualcore laptop.

Ick, that's not nice.

Can you enable debugging for the usb-serial core:
echo 1 > /sys/module/usbserial/parameters/debug

Sorry for taking some time, I've been struggling with the init system. I now see that the problem still is in 2.6.26-rc8, I will do that debugging thing next.

Quoted 2 lines
Quoted 2 lines

and then run whatever program you were running that causes this warning and then send us the kernel log?

I run "udev" that starts "gpsd" when I plug in a gps. The gps is then connected to /dev/ttyUSB0. I then run
"gpxlogger" that simply contact gpsd and prints coordinates to stdout. I also run "xgps" that contact gpsd in order to show some info about the gps satellites in use. All software from debian testing.

The problem is triggered by bending the USB cable - likely a cable fault. Sometimes I merely get a plain USB device disconnect. (This also
aborts my gps logging as the gps tend to reconnect to /dev/ttyUSB1 instead of /dev/ttyUSB0, but I guess that is a userland issue, not a kernel problem. Or is this a race condition?)

Quoted 6 lines
Quoted 1 line

Also, lots of things have been fixed since 2.6.26-rc2 - there might be benefit in retesting 2.6.26-rc7.

And can you tell us whether this is new behaviour? Was 2.6.25 OK?

I did not see it with 2.6.25, although the cable may have been OK at that time. I can test 2.6.25 after getting some USB debug output.

2.6.26-rc8 dmesg output, if it may help. I have only one pl2303 device. Still, it reconnects to ttyUSB1 before detaching from ttyUSB0 ???

hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 2-0:1.0: port 2 not reset yet, waiting 50ms
usb usb5: wakeup_rh (auto-start)
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: default language 0x0409
usb 5-2: uevent
usb 5-2: usb_probe_device
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: adding 5-2:1.0 (config #1, interface 0)
usb 5-2:1.0: uevent
drivers/usb/core/inode.c: creating file '002'
usb 5-2: New USB device found, idVendor=067b, idProduct=2303
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: USB-Serial Controller
usb 5-2: Manufacturer: Prolific Technology Inc.
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
usbcore: registered new interface driver usbserial
usbserial: USB Serial support registered for generic usbserial_generic 3-2:1.2: usb_probe_interface
usbserial_generic 3-2:1.2: usb_probe_interface - got id usbserial_generic 7-1.2:1.0: usb_probe_interface
usbserial_generic 7-1.2:1.0: usb_probe_interface - got id usbserial_generic 5-2:1.0: usb_probe_interface
usbserial_generic 5-2:1.0: usb_probe_interface - got id
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbserial: USB Serial support registered for pl2303
pl2303 5-2:1.0: usb_probe_interface
pl2303 5-2:1.0: usb_probe_interface - got id
pl2303 5-2:1.0: pl2303 converter detected
usb 5-2: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us

------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:319 serial_write_room+0x4b/0x60 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb

Pid: 7, comm: events/0 Not tainted 2.6.26-rc8-hh1 #1

Call Trace:
 [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
 [<ffffffff8022b11a>] check_preempt_wakeup+0xab/0xfa
 [<ffffffff8022a526>] try_to_wake_up+0x108/0x119
 [<ffffffff8022ecce>] hrtick_set+0x8b/0x10a
 [<ffffffff80229494>] __wake_up_common+0x46/0x75
 [<ffffffff8032e741>] __next_cpu+0x19/0x26
 [<ffffffffa001a54c>] :usbserial:serial_write_room+0x4b/0x60
 [<ffffffff8039b178>] opost+0x12/0x1c5
 [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
 [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
 [<ffffffff802470f3>] hrtimer_start+0x100/0x122
 [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
 [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
 [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
 [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
 [<ffffffff802411e8>] run_workqueue+0x81/0x10d
 [<ffffffff8024134c>] worker_thread+0xd8/0xe7
 [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80241274>] worker_thread+0x0/0xe7
 [<ffffffff8024433b>] kthread+0x47/0x73
 [<ffffffff802304a7>] schedule_tail+0x27/0x5c
 [<ffffffff8020cf68>] child_rip+0xa/0x12
 [<ffffffff802442f4>] kthread+0x0/0x73
 [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x6c/0x89 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb

Pid: 7, comm: events/0 Tainted: G W 2.6.26-rc8-hh1 #1

Call Trace:
 [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
 [<ffffffff8022b11a>] check_preempt_wakeup+0xab/0xfa
 [<ffffffff8022a526>] try_to_wake_up+0x108/0x119
 [<ffffffff8022ecce>] hrtick_set+0x8b/0x10a
 [<ffffffff80229494>] __wake_up_common+0x46/0x75
 [<ffffffffa001a5cd>] :usbserial:serial_write+0x6c/0x89
 [<ffffffff80396c3f>] tty_put_char+0x2b/0x2d
 [<ffffffff8039b317>] opost+0x1b1/0x1c5
 [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
 [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
 [<ffffffff802470f3>] hrtimer_start+0x100/0x122
 [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
 [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
 [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
 [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
 [<ffffffff802411e8>] run_workqueue+0x81/0x10d
 [<ffffffff8024134c>] worker_thread+0xd8/0xe7
 [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80241274>] worker_thread+0x0/0xe7
 [<ffffffff8024433b>] kthread+0x47/0x73
 [<ffffffff802304a7>] schedule_tail+0x27/0x5c
 [<ffffffff8020cf68>] child_rip+0xa/0x12
 [<ffffffff802442f4>] kthread+0x0/0x73
 [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------

WARNING: at drivers/usb/serial/usb-serial.c:319 serial_write_room+0x4b/0x60 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb

Pid: 7, comm: events/0 Tainted: G W 2.6.26-rc8-hh1 #1

Call Trace:
 [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
 [<ffffffff80229b98>] __wake_up+0x38/0x4f
 [<ffffffff802417ad>] __queue_work+0x23/0x33
 [<ffffffff80241837>] queue_work+0x47/0x50
 [<ffffffffa0023699>] :pl2303:pl2303_write+0xf2/0xff
 [<ffffffffa001a54c>] :usbserial:serial_write_room+0x4b/0x60
 [<ffffffff8039b178>] opost+0x12/0x1c5
 [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
 [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
 [<ffffffff802470f3>] hrtimer_start+0x100/0x122
 [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
 [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
 [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
 [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
 [<ffffffff802411e8>] run_workqueue+0x81/0x10d
 [<ffffffff8024134c>] worker_thread+0xd8/0xe7
 [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80241274>] worker_thread+0x0/0xe7
 [<ffffffff8024433b>] kthread+0x47/0x73
 [<ffffffff802304a7>] schedule_tail+0x27/0x5c
 [<ffffffff8020cf68>] child_rip+0xa/0x12
 [<ffffffff802442f4>] kthread+0x0/0x73
 [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x6c/0x89 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb

Pid: 7, comm: events/0 Tainted: G W 2.6.26-rc8-hh1 #1

Call Trace:
 [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
 [<ffffffff80229b98>] __wake_up+0x38/0x4f
 [<ffffffff802417ad>] __queue_work+0x23/0x33
 [<ffffffff80241837>] queue_work+0x47/0x50
 [<ffffffffa0023699>] :pl2303:pl2303_write+0xf2/0xff
 [<ffffffffa001a5cd>] :usbserial:serial_write+0x6c/0x89
 [<ffffffff80396c3f>] tty_put_char+0x2b/0x2d
 [<ffffffff8039b317>] opost+0x1b1/0x1c5
 [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
 [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
 [<ffffffff802470f3>] hrtimer_start+0x100/0x122
 [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
 [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
 [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
 [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
 [<ffffffff802411e8>] run_workqueue+0x81/0x10d
 [<ffffffff8024134c>] worker_thread+0xd8/0xe7
 [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80241274>] worker_thread+0x0/0xe7
 [<ffffffff8024433b>] kthread+0x47/0x73
 [<ffffffff802304a7>] schedule_tail+0x27/0x5c
 [<ffffffff8020cf68>] child_rip+0xa/0x12
 [<ffffffff802442f4>] kthread+0x0/0x73
 [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:319 serial_write_room+0x4b/0x60 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb

Pid: 7, comm: events/0 Tainted: G W 2.6.26-rc8-hh1 #1

Call Trace:
 [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
 [<ffffffffa00233eb>] :pl2303:pl2303_send+0x1b7/0x206
 [<ffffffffa0023699>] :pl2303:pl2303_write+0xf2/0xff
 [<ffffffffa001a54c>] :usbserial:serial_write_room+0x4b/0x60
 [<ffffffff8039b178>] opost+0x12/0x1c5
 [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
 [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
 [<ffffffff802470f3>] hrtimer_start+0x100/0x122
 [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
 [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
 [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
 [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
 [<ffffffff802411e8>] run_workqueue+0x81/0x10d
 [<ffffffff8024134c>] worker_thread+0xd8/0xe7
 [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80241274>] worker_thread+0x0/0xe7
 [<ffffffff8024433b>] kthread+0x47/0x73
 [<ffffffff802304a7>] schedule_tail+0x27/0x5c
 [<ffffffff8020cf68>] child_rip+0xa/0x12
 [<ffffffff802442f4>] kthread+0x0/0x73
 [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x6c/0x89 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb

Pid: 7, comm: events/0 Tainted: G W 2.6.26-rc8-hh1 #1

Call Trace:
 [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
 [<ffffffffa00233eb>] :pl2303:pl2303_send+0x1b7/0x206
 [<ffffffffa0023699>] :pl2303:pl2303_write+0xf2/0xff
 [<ffffffffa001a5cd>] :usbserial:serial_write+0x6c/0x89
 [<ffffffff80396c3f>] tty_put_char+0x2b/0x2d
 [<ffffffff8039b317>] opost+0x1b1/0x1c5
 [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
 [<ffffffff80331f0c>] rb_insert_color+0x66/0xe2
 [<ffffffff802470f3>] hrtimer_start+0x100/0x122
 [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
 [<ffffffff8022ece4>] hrtick_set+0xa1/0x10a
 [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
 [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
 [<ffffffff802411e8>] run_workqueue+0x81/0x10d
 [<ffffffff8024134c>] worker_thread+0xd8/0xe7
 [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80241274>] worker_thread+0x0/0xe7
 [<ffffffff8024433b>] kthread+0x47/0x73
 [<ffffffff802304a7>] schedule_tail+0x27/0x5c
 [<ffffffff8020cf68>] child_rip+0xa/0x12
 [<ffffffff802442f4>] kthread+0x0/0x73
 [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---

uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us
wlan0: RX too short data frame payload
wlan0: RX too short data frame payload
usb 5-2: uhci_result_common: failed with status 520000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
usb 5-2: uhci_result_common: failed with status 440000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 0099,00
hub 5-0:1.0: port 2 enable change, status 00000101
hub 5-0:1.0: port 2 disabled by hub (EMI?), re-enabling... hub 5-0:1.0: port 2, status 0101, change 0002, 12 Mb/s
usb 5-2: USB disconnect, address 2
usb 5-2: unregistering device
usb 5-2: usb_disable_device nuking all URBs
uhci_hcd 0000:00:1d.0: shutdown urb ffff81007c1579c0 ep1in-intr uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us usb 5-2: unregistering interface 5-2:1.0
pl2303 5-2:1.0: device disconnected
usb 5-2:1.0: uevent
usb 5-2: uevent
usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: default language 0x0409
usb 5-2: uevent
usb 5-2: usb_probe_device
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: adding 5-2:1.0 (config #1, interface 0)
usb 5-2:1.0: uevent
usbserial_generic 5-2:1.0: usb_probe_interface usbserial_generic 5-2:1.0: usb_probe_interface - got id pl2303 5-2:1.0: usb_probe_interface
pl2303 5-2:1.0: usb_probe_interface - got id
pl2303 5-2:1.0: pl2303 converter detected
usb 5-2: pl2303 converter now attached to ttyUSB1 drivers/usb/core/inode.c: creating file '003'
usb 5-2: New USB device found, idVendor=067b, idProduct=2303 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: USB-Serial Controller
usb 5-2: Manufacturer: Prolific Technology Inc.
uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 19 us pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0

------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:319 serial_write_room+0x4b/0x60 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb

Pid: 8, comm: events/1 Tainted: G W 2.6.26-rc8-hh1 #1

Call Trace:
 [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
 [<ffffffff8021aad2>] apic_wait_icr_idle+0x16/0x1f
 [<ffffffff8022a526>] try_to_wake_up+0x108/0x119
 [<ffffffff80229494>] __wake_up_common+0x46/0x75
 [<ffffffff8032e741>] __next_cpu+0x19/0x26
 [<ffffffffa001a54c>] :usbserial:serial_write_room+0x4b/0x60
 [<ffffffff8039b178>] opost+0x12/0x1c5
 [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
 [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
 [<ffffffff8022ecce>] hrtick_set+0x8b/0x10a
 [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
 [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
 [<ffffffff802411e8>] run_workqueue+0x81/0x10d
 [<ffffffff8024134c>] worker_thread+0xd8/0xe7
 [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80241274>] worker_thread+0x0/0xe7
 [<ffffffff8024433b>] kthread+0x47/0x73
 [<ffffffff802304a7>] schedule_tail+0x27/0x5c
 [<ffffffff8020cf68>] child_rip+0xa/0x12
 [<ffffffff802442f4>] kthread+0x0/0x73
 [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x6c/0x89 [usbserial]()
Modules linked in: pl2303 usbserial pcmcia bay intel_agp hci_usb

Pid: 8, comm: events/1 Tainted: G W 2.6.26-rc8-hh1 #1

Call Trace:
 [<ffffffff80232789>] warn_on_slowpath+0x51/0x8c
 [<ffffffff8021aad2>] apic_wait_icr_idle+0x16/0x1f
 [<ffffffff8022a526>] try_to_wake_up+0x108/0x119
 [<ffffffff80229494>] __wake_up_common+0x46/0x75
 [<ffffffffa001a5cd>] :usbserial:serial_write+0x6c/0x89
 [<ffffffff80396c3f>] tty_put_char+0x2b/0x2d
 [<ffffffff8039b317>] opost+0x1b1/0x1c5
 [<ffffffff8039c6ea>] n_tty_receive_buf+0x2d3/0xda2
 [<ffffffff8020a6a1>] __switch_to+0xa0/0x37a
 [<ffffffff8022ecce>] hrtick_set+0x8b/0x10a
 [<ffffffff803977e7>] flush_to_ldisc+0x10e/0x1bf
 [<ffffffff803976d9>] flush_to_ldisc+0x0/0x1bf
 [<ffffffff802411e8>] run_workqueue+0x81/0x10d
 [<ffffffff8024134c>] worker_thread+0xd8/0xe7
 [<ffffffff80244638>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80241274>] worker_thread+0x0/0xe7
 [<ffffffff8024433b>] kthread+0x47/0x73
 [<ffffffff802304a7>] schedule_tail+0x27/0x5c
 [<ffffffff8020cf68>] child_rip+0xa/0x12
 [<ffffffff802442f4>] kthread+0x0/0x73
 [<ffffffff8020cf5e>] child_rip+0x0/0x12

---[ end trace 34089ea06d99be00 ]---

uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 19 us
wlan0: RX too short data frame payload

(64-bit SMP core2duo laptop, voluntary preempt. dell latitude D830)

Helge Hafting

#4 lore raw
Quoted 5 lines · Helge Hafting

The problem is triggered by bending the USB cable - likely a cable fault. Sometimes I merely get a plain USB device disconnect. (This also aborts my gps logging as the gps tend to reconnect to /dev/ttyUSB1 instead of /dev/ttyUSB0, but I guess that is a userland issue, not a kernel problem. Or is this a race condition?)

That is because your userspace program still has ttyUSB0 open, so it creates the next valid device, ttyUSB1. There is no way to connect the new device to the old one as it has no idea it should do so.

Flaky hardware connections are not nice on drivers at times, although we should not be crashing :)

We are probably just not handling the fact that the device is still open properly, although I thought all of those errors were long since fixed, perhaps the tty layer changes are now showing other inadequacies of the usb-serial core up...

Those debug logs would be most helpful in tracking this down.

thanks,

greg k-h

#5 lore raw
In reply to Greg KH
Quoted 39 lines · Greg KH
Quoted 33 lines · Helge Hafting

This is what I got:

------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 [usbserial]()
Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia ata_piix iTCO_wdt ata_generic bay hci_usb intel_agp

Pid: 10, comm: events/1 Tainted: G W 2.6.26-rc2-hh1 #1

Call Trace:
 [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
 [<ffffffff8022c207>] __wake_up+0x38/0x4f
 [<ffffffff8024565c>] __queue_work+0x23/0x33
 [<ffffffff802456c8>] queue_work+0x37/0x40
 [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
 [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
 [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
 [<ffffffff803ad3ca>] echo_char+0x47/0x60
 [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
 [<ffffffff8020a87e>] __switch_to+0xa2/0x396
 [<ffffffff8023028d>] hrtick_set+0x88/0xf6
 [<ffffffff80590b44>] thread_return+0x70/0xb4
 [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
 [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
 [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
 [<ffffffff8024520b>] run_workqueue+0x80/0x112
 [<ffffffff80245afe>] worker_thread+0xd9/0xe8
 [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80245a25>] worker_thread+0x0/0xe8
 [<ffffffff80248264>] kthread+0x47/0x73
 [<ffffffff802318c1>] schedule_tail+0x28/0x5d
 [<ffffffff8020cf88>] child_rip+0xa/0x12
 [<ffffffff8024821d>] kthread+0x0/0x73
 [<ffffffff8020cf7e>] child_rip+0x0/0x12

---[ end trace 656e180042992f9e ]---
Quoted 4 lines

I looked at the dmesg log because I have had lots of trouble with my gps lately. I first suspected the cable, but then I saw this.

After this, I have to restart gpsd, and perhaps replug the cable to get things going again. Until it happens again. This is a 64-bit dualcore laptop.

Quoted 8 lines

Ick, that's not nice.

Can you enable debugging for the usb-serial core:
echo 1 > /sys/module/usbserial/parameters/debug

and then run whatever program you were running that causes this warning and then send us the kernel log?

USB logging sure creates lots of data.
8.4M of log bzipped into 237kB here:
http://www.aitel.hist.no/~helgehaf/usbtrouble1.log.bz2

This contains:
* Kernel log all the way from bootup (2.6.26-rc8)
* An USB incident before I turned USB logging on
* An USB incident after I turned USB logging on

Almost all of it is these two lines repeating forewer:
drivers/usb/serial/usb-serial.c: serial_chars_in_buffer = port 0 drivers/usb/serial/usb-serial.c: serial_write_room - port 0

The port numbers change a couple of times throughout the log.

Helge Hafting

#6 lore raw
Quoted 58 lines · Helge Hafting
Quoted 39 lines · Greg KH
Quoted 38 lines · Helge Hafting

This is what I got:

------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:306 serial_write+0x62/0x89 
[usbserial]()
Modules linked in: pl2303 usbserial sbs sbshc coretemp piix pcmcia 

ata_piix iTCO_wdt ata_generic bay hci_usb intel_agp
Pid: 10, comm: events/1 Tainted: G W 2.6.26-rc2-hh1 #1

Call Trace:
 [<ffffffff80236b54>] warn_on_slowpath+0x51/0x7a
 [<ffffffff8022c207>] __wake_up+0x38/0x4f
 [<ffffffff8024565c>] __queue_work+0x23/0x33
 [<ffffffff802456c8>] queue_work+0x37/0x40
 [<ffffffffa0045fa3>] :pl2303:pl2303_write+0xf2/0x101
 [<ffffffffa003c368>] :usbserial:serial_write+0x62/0x89
 [<ffffffff803a8e81>] tty_put_char+0x2b/0x2d
 [<ffffffff803ad3ca>] echo_char+0x47/0x60
 [<ffffffff803ade97>] n_tty_receive_buf+0x2b4/0xd76
 [<ffffffff8020a87e>] __switch_to+0xa2/0x396
 [<ffffffff8023028d>] hrtick_set+0x88/0xf6
 [<ffffffff80590b44>] thread_return+0x70/0xb4
 [<ffffffff8023f013>] lock_timer_base+0x26/0x4c
 [<ffffffff803a9abd>] flush_to_ldisc+0xf8/0x185
 [<ffffffff803a99c5>] flush_to_ldisc+0x0/0x185
 [<ffffffff8024520b>] run_workqueue+0x80/0x112
 [<ffffffff80245afe>] worker_thread+0xd9/0xe8
 [<ffffffff80248380>] autoremove_wake_function+0x0/0x2e
 [<ffffffff80245a25>] worker_thread+0x0/0xe8
 [<ffffffff80248264>] kthread+0x47/0x73
 [<ffffffff802318c1>] schedule_tail+0x28/0x5d
 [<ffffffff8020cf88>] child_rip+0xa/0x12
 [<ffffffff8024821d>] kthread+0x0/0x73
 [<ffffffff8020cf7e>] child_rip+0x0/0x12

---[ end trace 656e180042992f9e ]---

I looked at the dmesg log because I have had lots of trouble with my gps lately. I first suspected the cable, but then I saw this.

Quoted 8 lines
Quoted 3 lines

After this, I have to restart gpsd, and perhaps replug the cable to get things going again. Until it happens again. This is a 64-bit dualcore laptop.

Ick, that's not nice.
Can you enable debugging for the usb-serial core:
echo 1 > /sys/module/usbserial/parameters/debug
and then run whatever program you were running that causes this warning and then send us the kernel log?

USB logging sure creates lots of data.
8.4M of log bzipped into 237kB here:
http://www.aitel.hist.no/~helgehaf/usbtrouble1.log.bz2

This contains:
* Kernel log all the way from bootup (2.6.26-rc8)
* An USB incident before I turned USB logging on
* An USB incident after I turned USB logging on

Quoted 5 lines

Almost all of it is these two lines repeating forewer:
drivers/usb/serial/usb-serial.c: serial_chars_in_buffer = port 0 drivers/usb/serial/usb-serial.c: serial_write_room - port 0

The port numbers change a couple of times throughout the log.

Ah, sorry for the delay, got sidetracked with other bugs...

In looking at this further, it's just a warning that is triggering, nothing to really be woried about right now. Alan Cox has done a lot of work in this area in the tty layer rework for 2.6.27 that should keep this race from happening in the future (something is calling write_room on a port that was previously closed, not very nice.)

So you can safely ignore it, it should not be causing any problems, only showing examples of a flaky connection/hardware.

thanks for your patience,

greg k-h