powerpc/fsl_soc: gianfar: don't probe disabled devices
PATCH 2/2 powerpc/fsl_soc: gianfar: don't probe disabled devices
Freescale ships MPC8315E-RDB boards in two variants:
1. With TSEC1 ethernet support and USB UTMI PHY;
2. Without TSEC1 support, but with USB ULPI PHY in addition.
For the second case U-Boot will add status = "disabled"; property into the TSEC1 node, so Linux should not try to probe it.
Signed-off-by Anton Vorontsov <[email protected]>
--- arch/powerpc/sysdev/fsl_soc.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
arch/powerpc/sysdev/fsl_soc.c +3 -0
@@ -296,6 +296,9 @@ static int __init gfar_of_init(void)const phandle *ph;int n_res =2 ; +if (!of_device_is_available (np)) +continue ; +memset (r,0 ,sizeof (r));memset (&gfar_data,0 ,sizeof (gfar_data));
Signature · 1 line
1.5.5.4
Kumar Gala
AppliedQuoted 5 lines · Anton Vorontsov
Freescale ships MPC8315E-RDB boards in two variants:
1. With TSEC1 ethernet support and USB UTMI PHY;
2. Without TSEC1 support, but with USB ULPI PHY in addition.
Quoted 7 lines
For the second case U-Boot will add status = "disabled"; property into the TSEC1 node, so Linux should not try to probe it.
Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/sysdev/fsl_soc.c| 3 +++1 files changed, 3 insertions(+), 0 deletions(-)
applied.
- k