ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.

From: Feng Kan <[email protected]>

Add AMCC Redwood reference board that uses the latest PPC 464 CPU processor combined with a rich mix of peripheral controllers. The board will support PCIe, mutiple Gig ethernet ports, advanced hardware RAID assistance and IEEE 1588.

---
 MAINTAINERS                   |    3 +
 MAKEALL                       |    1 +
 Makefile                      |    3 +
 board/amcc/redwood/Makefile   |   50 ++++
 board/amcc/redwood/config.mk  |   42 ++++
 board/amcc/redwood/init.S     |   77 +++++++
 board/amcc/redwood/redwood.c  |  492 +++++++++++++++++++++++++++++++++++++++++
 board/amcc/redwood/redwood.h  |   50 ++++
 board/amcc/redwood/u-boot.lds |  147 ++++++++++++
 9 files changed, 865 insertions(+), 0 deletions(-)
 create mode 100644 board/amcc/redwood/Makefile
 create mode 100644 board/amcc/redwood/config.mk
 create mode 100644 board/amcc/redwood/init.S
 create mode 100644 board/amcc/redwood/redwood.c
 create mode 100644 board/amcc/redwood/redwood.h
 create mode 100644 board/amcc/redwood/u-boot.lds

index a3d70b1..a4637fd 100644
@@ -420,6 +420,9 @@ Guennadi Liakhovetski <[email protected]>
 
 	linkstation		MPC8241
 
+Feng Kan <[email protected]>
+
+	redwood			PPC4xx
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:

index 32caab7..566e63a 100755
@@ -221,6 +221,7 @@ LIST_4xx="		\
 	PPChameleonEVB	\
 	quad100hd	\
 	rainier		\
+	redwood		\
 	sbc405		\
 	sc3		\
 	sequoia		\

index 8bfc891..ff38e0c 100644
@@ -1417,6 +1417,9 @@ rainier_nand_config: unconfig
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
+redwood_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
+
 sc3_config:unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
 

1.5.6.1

Applied to "next" branch in u-boot-ppc4xx repository. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================