regulator: TI bq24022 Li-Ion Charger driver
PATCH v2 1/1 regulator: TI bq24022 Li-Ion Charger driver
This adds a regulator driver for the TI bq24022 Single-Chip Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs.
Signed-off-by Philipp Zabel <[email protected]>
--- drivers/regulator/Kconfig | 10 ++ drivers/regulator/Makefile | 2 + drivers/regulator/bq24022.c | 167 +++++++++++++++++++++++++++++++++++++ include/linux/regulator/bq24022.h | 23 +++++ 4 files changed, 202 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/bq24022.c create mode 100644 include/linux/regulator/bq24022.h
drivers/regulator/Kconfig +10 -0
@@ -46,4 +46,14 @@ config REGULATOR_VIRTUAL_CONSUMER If unsure, say no. +config REGULATOR_BQ24022 + tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" + default n + select REGULATOR + help + This driver controls a TI bq24022 Charger attached via + GPIOs. The provided current regulator can enable/disable + charging select between 100 mA and 500 mA charging current + limit. + endmenu
drivers/regulator/Makefile +2 -0
@@ -7,4 +7,6 @@ obj-$(CONFIG_REGULATOR) += core.o obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o +obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o + ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
drivers/regulator/bq24022.c new file +167 -0
167 lines not on this page · raw message
include/linux/regulator/bq24022.h new file +23 -0
@@ -0,0 +1,23 @@ +/* +* Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater) +* 1-Cell Li-Ion Charger connected via GPIOs. +* +* Copyright (c) 2008 Philipp Zabel +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +/** +*bq24022_mach_info - platform data for bq24022 +*@gpio_nce: GPIO line connected to the nCE pin, +* used to enable / disable charging. +*@gpio_iset2: GPIO line connected to the ISET2 pin, +* used to limit charging current to 100 mA / 500 mA. +*/ +struct bq24022_mach_info { +int gpio_nce; +int gpio_iset2; +};
Signature · 1 line
1.5.6.2
Liam Girdwood
AppliedQuoted 4 lines · Philipp Zabel
This adds a regulator driver for the TI bq24022 Single-Chip Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs.
Signed-off-by Philipp Zabel <[email protected]>
Applied.
Thanks
Liam
Quoted 2 lines · On Fri, 11 Jul 2008 17:28:06 +0200 Philipp Zabel <[email protected]>…
This adds a regulator driver for the TI bq24022 Single-Chip Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs.
Incremental diffs are so much better. It allowed us to see what you changed. Two things:
a) re-broke the kerneldoc comments
b) this:
drivers/regulator/bq24022.c renamed from drivers/regulator/bq24022.c~regulator-ti-bq24022-li-ion-charger-driver-update +3 -3
@@ -145,12 +145,12 @@ static struct platform_driver bq24022_dr .remove = __devexit_p(bq24022_remove), }; -static int __init bq24022_init () +static int __init bq24022_init (void ) { -platform_driver_probe (&bq24022_driver, bq24022_probe); +return platform_driver_probe (&bq24022_driver, bq24022_probe); } -static void __exit bq24022_exit() +static void __exit bq24022_exit(void) {platform_driver_unregister (&bq24022_driver); }