unknown dvbt device 1ae7:0381 Xtensions 380U

Hi,

has anyone ever tryed to get the Xtensions 380 working with linux?

url:

http://www.x-tensions.net/support.php?lang=de&view=solo&prod_num=XD-380
But be carefull with the driver on this page. It differs a lot against the driver included at the CD delivered with the stick.

I had a look into the windows driver (on the CD) and found nothing what could give an information which linux-driver is the right one (in my eyes). If it is useful, I can put the windows driver to the www.

Is there any realistic hope, to get this device work with linux? I will test any patches and try any hints etc.

lsusb:
1ae7:0381

lsusb -vvv:

Bus 001 Device 007: ID 1ae7:0381
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1ae7
  idProduct          0x0381
  bcdDevice            2.00
  iManufacturer           1 Afatech
  iProduct                2 DVB-T 2
  iSerial                 0
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0

bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Best regards

Robert

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Looks like rebranded KWorld PlusTV 380U. Device is AF9015 chipset based. I can add support for this later today.

Antti

http://palosaari.fi/

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Device USB-IDs are now added to the driver. Please test:
http://linuxtv.org/hg/~anttip/af9015

regards
Antti

http://palosaari.fi/

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hello Antti,

thanks for your work. I tryed your patched files and according to dmesg, it looks like a good initialisation. But after init there are endless failures like:
dvb-usb: error while querying for an remote control event.
af9015: af9015_rw_udev: sending failed: -110 (8/0)
af9015: af9015_rw_udev: receiving failed: -110

here is the full dmesg output:

usb 1-6.1: new high speed USB device using ehci_hcd and address 8 usb 1-6.1: configuration #1 chosen from 1 choice
af9015_usb_probe: interface:0
af9015_read_config: IR mode:4
af9015_read_config: TS mode:0
af9015_read_config: [0] xtal:2 set adc_clock:28000
af9015_read_config: [0] IF1:36125
af9015_read_config: [0] MT2060 IF1:5888
af9015_read_config: [0] tuner id:134
af9015_identify_state: reply:01
dvb-usb: found a 'Xtensions XD-380' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' af9015_download_firmware:
usb 1-6.1: New USB device found, idVendor=1ae7, idProduct=0381 usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.1: Product: DVB-T 2
usb 1-6.1: Manufacturer: Afatech
usb 1-6.1: USB disconnect, address 8
af9015_usb_device_exit:
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. usb 1-6.1: new high speed USB device using ehci_hcd and address 9 usb 1-6.1: configuration #1 chosen from 1 choice
af9015_usb_probe: interface:0
af9015_read_config: IR mode:4
af9015_read_config: TS mode:0
af9015_read_config: [0] xtal:2 set adc_clock:28000
af9015_read_config: [0] IF1:36125
af9015_read_config: [0] MT2060 IF1:5888
af9015_read_config: [0] tuner id:134
af9015_identify_state: reply:02
dvb-usb: found a 'Xtensions XD-380' in warm state.
i2c-adapter i2c-3: SMBus Quick command not supported, can't probe for chips
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Xtensions XD-380) af9015_af9013_frontend_attach: init I2C
af9015_i2c_init:
i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips 00: 2b f0 9b 0b 00 00 00 00 e7 1a 81 03 00 02 01 02
10: 00 80 00 fa fa 10 40 ef 04 30 31 30 31 30 32 30
20: 32 30 37 30 30 30 30 31 ff ff ff ff ff ff ff ff
30: 00 00 3a 01 00 08 02 00 1d 8d 00 17 86 ff ff ff
40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff
50: ff ff ff ff ff 26 00 00 04 03 09 04 10 03 41 00
60: 66 00 61 00 74 00 65 00 63 00 68 00 10 03 44 00
70: 56 00 42 00 2d 00 54 00 20 00 32 00 20 03 30 00
80: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30 00
90: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
af9013: chip version:1 ROM version:1.0
af9013: firmware version:4.65.0
DVB: registering frontend 0 (Afatech AF9013 DVB-T)... af9015_tuner_attach:
Quantek QT1010 successfully identified.
input: IR-receiver inside an USB DVB receiver as /class/input/input11
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: Xtensions XD-380 successfully initialized and connected. af9015_init:
af9015_init_endpoint: USB speed:3
af9015_download_ir_table:
usb 1-6.1: New USB device found, idVendor=1ae7, idProduct=0381 usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.1: Product: DVB-T 2
usb 1-6.1: Manufacturer: Afatech
af9015: af9015_rw_udev: command failed: 255
dvb-usb: error while querying for an remote control event.
af9015: af9015_rw_udev: command failed: 255
dvb-usb: error while querying for an remote control event.
af9015: af9015_rw_udev: command failed: 255
dvb-usb: error while querying for an remote control event.
af9015: af9015_rw_udev: command failed: 255
dvb-usb: error while querying for an remote control event.
af9015: af9015_rw_udev: command failed: 255
dvb-usb: error while querying for an remote control event.
af9015: af9015_rw_udev: command failed: 255
dvb-usb: error while querying for an remote control event.
af9015: af9015_rw_udev: command failed: 255
dvb-usb: error while querying for an remote control event.
....

Sorry for this not so good news in the evening :-|

regards

Robert

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

I have no idea what IR-mode is 0x04 but hopefully it will start working now when remote polling is disabled.
Please test again.

regards
Antti

http://palosaari.fi/

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb