kernel oops with framebuffer device vt8623fb
Hi!
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
At first my Hardware: A VIA Nehemiah 1GHz CPU with 1GB RAM, VIA VT 8623 hostbridge, a Transcent CF-Card as hdc and a Western Digital 250GB HDD as hdd (altough, the devices are mixed up since 2.6.26, they are now hda and hdb). The Mainboard itself is a Lex Twister System CV-863A Here is my lspci output:
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82)
00:0c.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82)
00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03)
With 2.6.25.11 I get the following output on system startup. The vt8623fb is compiled into the kernel, not loaded as module.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
fb0: VIA VT8623 on 0000:01:00.0, 16 MB RAM
As I can use my old 2.6.25.11 kernel without problems I can eliminate a hardware failure. Altough, the fb-Device is not used, the machine is without monitor.
If I have compiled in the framebuffer-device in 2.6.26 in the kernel the system hangs up very early with a oops. If I have compiled as module, the following oops is generated:
BUG: unable to handle kernel NULL pointer dereference at 000000b8 IP: [<c02a39c0>] dev_driver_string+0x0/0x29 *pde = 00000000 Oops: 0000 [#1] Modules linked in: vt8623fb(+) svgalib vgastate budget_av saa7146_vv videobuf_dma_sg videobuf_core budget_core saa7146 ttpci_eeprom tda10021 tda10023 tda1004x
Pid: 3657, comm: modprobe Not tainted (2.6.26 #5)
EIP: 0060:[<c02a39c0>] EFLAGS: 00010286 CPU: 0
EIP is at dev_driver_string+0x0/0x29
EAX: 00000000 EBX: f8e57e00 ECX: 00000010 EDX: 00000004
ESI: 0000008c EDI: f5fe9c00 EBP: 00000000 ESP: ec041de0
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process modprobe (pid: 3657, ti=ec040000 task=ec03d8d0 task.ti=ec040000)
Stack: f8e56408 f7d44000 c0185b44 f5fe9e34 00000010 04d440b4 000719d4 f8e57e90
f8e57e60 f7d44000 c02a5daa c0250f4a f7d4404c 00000000 f8e57e90
c02a5d34
f7d4404c f7d440f4 f8e57e90 c02a5de1 00000000 f8e57e90 f8e57e90
c02a560d
Call Trace:
[<f8e56408>] vt8623_pci_probe+0x283/0x45b [vt8623fb]
[<c0185b44>] sysfs_create_link+0x85/0xc5
[<c02a5daa>] __driver_attach+0x0/0x55
[<c0250f4a>] pci_device_probe+0x36/0x57
[<c02a5d34>] driver_probe_device+0xb4/0x12a
[<c02a5de1>] __driver_attach+0x37/0x55
[<c02a560d>] bus_for_each_dev+0x34/0x56
[<c02a5bd0>] driver_attach+0x11/0x13
[<c02a5daa>] __driver_attach+0x0/0x55
[<c02a5963>] bus_add_driver+0x8a/0x1a7
[<c02419f0>] kset_find_obj+0x18/0x40
[<c02a5f39>] driver_register+0x6d/0xc1
[<c02510e0>] __pci_register_driver+0x2b/0x57
[<c012f73f>] sys_init_module+0x14cd/0x161e
[<c0110b49>] do_page_fault+0x228/0x537
[<c024265d>] prio_tree_insert+0x1b/0x1dd
[<f8e4a021>] svga_tilecopy+0x0/0x100 [svgalib]
[<c01035c1>] sysenter_past_esp+0x6a/0x99
=======================
Code: 5a 85 c0 59 79 20 68 24 d7 5d c0 b9 1b 87 4a c0 31 d2 b8 e8 0e 4e c0 53 e8 09 47 e7 ff 5a 59 eb 05 b8 ed ff ff ff 5b c3 90 90 90 <8b> 90 b8 00 00 00 85 d2 75 0a 8b 90 b4 00 00 00 85 d2 74 03 8b
EIP: [<c02a39c0>] dev_driver_string+0x0/0x29 SS:ESP 0068:ec041de0
---[ end trace 70dfd8b98995a740 ]---Quoted 1 line
Quoted 1 line
EIP;
c02a39c0No symbols available <=====
At this time there are 3 new modules listed with lsmod, altough I cannot remove them any more without a reboot. lsmod
vt8623fb 12948 1 svgalib 8832 1 vt8623fb vgastate 7680 1 vt8623fb
For compiling the 2.6.26 kernel I did as I always do - i used the .config from 2.6.25.11 and saved it new. Compiling was without problems possible. I am compiling on a debian etch system with gcc 4.1.2
If necessary, I can provide access to the machine - feel free to contact me (also if any futher information would be helpful).
I hope I have done my first lkml well - if not please don't shout at me, I've done my best.
kind regards,
Alois
Here is my .config:
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.26
# Wed Jul 16 15:31:30 2008
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=yCONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not setCONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not setCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not setCONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_COMPAT_BRK=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not setCONFIG_PROC_PAGE_MONITOR=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_BLOCK=yCONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not setCONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not setCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not setCONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not setCONFIG_MVIAC3_2=y
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not setCONFIG_X86_GENERIC=yCONFIG_X86_CPU=yCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_ALIGNMENT_16=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=4CONFIG_X86_DEBUGCTLMSR=yCONFIG_HPET_TIMER=yCONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not setCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not setCONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not setCONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not setCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not setCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x100000CONFIG_COMPAT_VDSO=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not setCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not setCONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not setCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not setCONFIG_X86_E_POWERSAVER=y
#
# shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not setCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not setCONFIG_PCI_LEGACY=yCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not setCONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not setCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not setCONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=yCONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=yCONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not setCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=y CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CONNTRACK=yCONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set CONFIG_NF_CONNTRACK_PPTP=y
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=y
# CONFIG_NF_CT_NETLINK is not set CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y CONFIG_NETFILTER_XT_TARGET_CONNMARK=y CONFIG_NETFILTER_XT_TARGET_DSCP=y CONFIG_NETFILTER_XT_TARGET_MARK=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_NOTRACK=y CONFIG_NETFILTER_XT_TARGET_RATEEST=y CONFIG_NETFILTER_XT_TARGET_TRACE=y CONFIG_NETFILTER_XT_TARGET_SECMARK=y CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=y CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y CONFIG_NETFILTER_XT_MATCH_CONNMARK=y CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_DCCP=y CONFIG_NETFILTER_XT_MATCH_DSCP=y CONFIG_NETFILTER_XT_MATCH_ESP=y CONFIG_NETFILTER_XT_MATCH_HELPER=y CONFIG_NETFILTER_XT_MATCH_IPRANGE=y CONFIG_NETFILTER_XT_MATCH_LENGTH=y CONFIG_NETFILTER_XT_MATCH_LIMIT=y CONFIG_NETFILTER_XT_MATCH_MAC=y CONFIG_NETFILTER_XT_MATCH_MARK=y CONFIG_NETFILTER_XT_MATCH_OWNER=y CONFIG_NETFILTER_XT_MATCH_POLICY=y CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y CONFIG_NETFILTER_XT_MATCH_QUOTA=y CONFIG_NETFILTER_XT_MATCH_RATEEST=y CONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=y CONFIG_NETFILTER_XT_MATCH_STATISTIC=y CONFIG_NETFILTER_XT_MATCH_STRING=y CONFIG_NETFILTER_XT_MATCH_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_TIME=y CONFIG_NETFILTER_XT_MATCH_U32=y CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV4=yCONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not setCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_MATCH_RECENT=yCONFIG_IP_NF_MATCH_ECN=yCONFIG_IP_NF_MATCH_AH=yCONFIG_IP_NF_MATCH_TTL=yCONFIG_IP_NF_MATCH_ADDRTYPE=yCONFIG_IP_NF_FILTER=yCONFIG_IP_NF_TARGET_REJECT=yCONFIG_IP_NF_TARGET_LOG=yCONFIG_IP_NF_TARGET_ULOG=yCONFIG_NF_NAT=yCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=yCONFIG_IP_NF_TARGET_REDIRECT=yCONFIG_IP_NF_TARGET_NETMAP=yCONFIG_NF_NAT_SNMP_BASIC=yCONFIG_NF_NAT_PROTO_GRE=yCONFIG_NF_NAT_FTP=yCONFIG_NF_NAT_IRC=yCONFIG_NF_NAT_TFTP=y
# CONFIG_NF_NAT_AMANDA is not setCONFIG_NF_NAT_PPTP=y
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not setCONFIG_IP_NF_MANGLE=yCONFIG_IP_NF_TARGET_ECN=yCONFIG_IP_NF_TARGET_TTL=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not setCONFIG_IP_NF_RAW=yCONFIG_IP_NF_ARPTABLES=yCONFIG_IP_NF_ARPFILTER=yCONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not setCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#CONFIG_BRIDGE_NF_EBTABLES=yCONFIG_BRIDGE_EBT_BROUTE=yCONFIG_BRIDGE_EBT_T_FILTER=yCONFIG_BRIDGE_EBT_T_NAT=yCONFIG_BRIDGE_EBT_802_3=yCONFIG_BRIDGE_EBT_AMONG=yCONFIG_BRIDGE_EBT_ARP=yCONFIG_BRIDGE_EBT_IP=yCONFIG_BRIDGE_EBT_LIMIT=yCONFIG_BRIDGE_EBT_MARK=yCONFIG_BRIDGE_EBT_PKTTYPE=yCONFIG_BRIDGE_EBT_STP=yCONFIG_BRIDGE_EBT_VLAN=yCONFIG_BRIDGE_EBT_ARPREPLY=yCONFIG_BRIDGE_EBT_DNAT=yCONFIG_BRIDGE_EBT_MARK_T=yCONFIG_BRIDGE_EBT_REDIRECT=yCONFIG_BRIDGE_EBT_SNAT=yCONFIG_BRIDGE_EBT_LOG=y
# CONFIG_BRIDGE_EBT_ULOG is not set
# CONFIG_BRIDGE_EBT_NFLOG is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not setCONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not setCONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=yCONFIG_NET_SCH_HTB=yCONFIG_NET_SCH_HFSC=yCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_GRED=yCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_NETEM=yCONFIG_NET_SCH_INGRESS=y
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=yCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=yCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not setCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=yCONFIG_NET_EMATCH_NBYTE=yCONFIG_NET_EMATCH_U32=yCONFIG_NET_EMATCH_META=yCONFIG_NET_EMATCH_TEXT=yCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=yCONFIG_NET_ACT_GACT=yCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=yCONFIG_NET_ACT_IPT=y
# CONFIG_NET_ACT_NAT is not setCONFIG_NET_ACT_PEDIT=yCONFIG_NET_ACT_SIMP=yCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not setCONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not setCONFIG_HAVE_IDE=yCONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not setCONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#CONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not setCONFIG_NET_ETHERNET=yCONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not setCONFIG_NET_TULIP=y
# CONFIG_DE2104X is not setCONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not setCONFIG_NET_PCI=yCONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not setCONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not setCONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=mCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_FMVJ18X=mCONFIG_PCMCIA_PCNET=mCONFIG_PCMCIA_NMCLAN=mCONFIG_PCMCIA_SMC91C92=mCONFIG_PCMCIA_XIRC2PS=mCONFIG_PCMCIA_AXNET=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_CS=mCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not setCONFIG_HW_RANDOM_VIA=yCONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not setCONFIG_HPET=yCONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=yCONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not setCONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not setCONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not setCONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#CONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2_COMMON=yCONFIG_VIDEO_ALLOW_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_DVB_CORE=yCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#CONFIG_VIDEO_SAA7146=mCONFIG_VIDEO_SAA7146_VV=m
# CONFIG_MEDIA_ATTACH is not setCONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not setCONFIG_MEDIA_TUNER_SIMPLE=yCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5761=yCONFIG_MEDIA_TUNER_TEA5767=yCONFIG_MEDIA_TUNER_MT20XX=yCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC5000=yCONFIG_VIDEO_V4L2=yCONFIG_VIDEO_V4L1=yCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEO_IR_I2C=mCONFIG_VIDEO_IR=mCONFIG_VIDEO_TVEEPROM=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_CS53L32A=mCONFIG_VIDEO_M52790=mCONFIG_VIDEO_WM8775=mCONFIG_VIDEO_WM8739=mCONFIG_VIDEO_VP27SMPX=mCONFIG_VIDEO_SAA711X=mCONFIG_VIDEO_SAA717X=mCONFIG_VIDEO_CX25840=mCONFIG_VIDEO_CX2341X=mCONFIG_VIDEO_SAA7127=mCONFIG_VIDEO_UPD64031A=mCONFIG_VIDEO_UPD64083=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not setCONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_FB_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_V4L_USB_DRIVERS is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not setCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_TTPCI_EEPROM=m
# CONFIG_DVB_AV7110 is not setCONFIG_DVB_BUDGET_CORE=m
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not setCONFIG_DVB_BUDGET_AV=m
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#CONFIG_DVB_FE_CUSTOMISE=y
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_VES1X93 is not setCONFIG_DVB_TUNER_ITD1000=m
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not setCONFIG_DVB_TDA1004X=m
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not setCONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not setCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=m
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not setCONFIG_DVB_AU8522=mCONFIG_DVB_S5H1411=m
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not setCONFIG_DVB_ISL6405=m
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not setCONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not setCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not setCONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not setCONFIG_VGASTATE=m
# CONFIG_VIDEO_OUTPUT_CONTROL is not setCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not setCONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not setCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not setCONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not setCONFIG_FB_VT8623=m
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256CONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
#
# Sound
#CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#CONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_RAWMIDI=yCONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=yCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=yCONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not setCONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not setCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not setCONFIG_AC97_BUS=yCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not setCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not setCONFIG_JBD=yCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not setCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not setCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not setCONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not setCONFIG_NFSD=yCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not setCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not setCONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not setCONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_NONPROMISC_DEVMEM is not setCONFIG_EARLY_PRINTK=y
# CONFIG_4KSTACKS is not setCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not setCONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=mCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not setCONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_WP512=m
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=yCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=mCONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=mCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=yCONFIG_CRYPTO_DEV_PADLOCK_AES=y
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not setCONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not setCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=mCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=yCONFIG_TEXTSEARCH_BM=yCONFIG_TEXTSEARCH_FSM=yCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y
Quoted 6 lines · On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
Of course, info->dev is NULL, info was just kzallocated!
Do
git-revert 20e061fb750d36ec0ffcb2e44ed7dafa9018223b
rebuild, reboot to confirm.
Quoted 45 lines
BUG: unable to handle kernel NULL pointer dereference at 000000b8 IP: [<c02a39c0>] dev_driver_string+0x0/0x29 *pde = 00000000 Oops: 0000 [#1] Modules linked in: vt8623fb(+) svgalib vgastate budget_av saa7146_vv
videobuf_dma_sgvideobuf_corebudget_coresaa7146ttpci_eepromtda10021 tda10023 tda1004xPid: 3657, comm: modprobe Not tainted (2.6.26 #5)
EIP: 0060:[<c02a39c0>] EFLAGS: 00010286 CPU: 0
EIP is atdev_driver_string+0x0/0x29
EAX: 00000000 EBX:f8e57e00ECX: 00000010 EDX: 00000004
ESI:0000008cEDI:f5fe9c00EBP: 00000000 ESP:ec041de0
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process modprobe (pid: 3657, ti=ec040000 task=ec03d8d0 task.ti=ec040000)Stack: f8e56408 f7d44000 c0185b44 f5fe9e34 00000010 04d440b4 000719d4 f8e57e90 f8e57e60 f7d44000 c02a5daa c0250f4a f7d4404c 00000000 f8e57e90 c02a5d34 f7d4404c f7d440f4 f8e57e90 c02a5de1 00000000 f8e57e90 f8e57e90 c02a560d Call Trace: [<f8e56408>] vt8623_pci_probe+0x283/0x45b [vt8623fb] [<c0185b44>] sysfs_create_link+0x85/0xc5 [<c02a5daa>] __driver_attach+0x0/0x55 [<c0250f4a>] pci_device_probe+0x36/0x57 [<c02a5d34>] driver_probe_device+0xb4/0x12a [<c02a5de1>] __driver_attach+0x37/0x55 [<c02a560d>] bus_for_each_dev+0x34/0x56 [<c02a5bd0>] driver_attach+0x11/0x13 [<c02a5daa>] __driver_attach+0x0/0x55 [<c02a5963>] bus_add_driver+0x8a/0x1a7 [<c02419f0>] kset_find_obj+0x18/0x40 [<c02a5f39>] driver_register+0x6d/0xc1 [<c02510e0>] __pci_register_driver+0x2b/0x57 [<c012f73f>] sys_init_module+0x14cd/0x161e [<c0110b49>] do_page_fault+0x228/0x537 [<c024265d>] prio_tree_insert+0x1b/0x1dd [<f8e4a021>] svga_tilecopy+0x0/0x100 [svgalib] [<c01035c1>] sysenter_past_esp+0x6a/0x99 ======================= Code: 5a 85 c0 59 79 20 68 24 d7 5d c0 b9 1b 87 4a c0 31 d2 b8 e8 0e 4e c053 e8 09 47 e7 ff 5a 59 eb 05 b8 ed ff ff ff 5b c3 90 90 90 <8b> 90 b8 00 00 00 85 d2 75 0a 8b 90 b4 00 00 00 85 d2 74 03 8b
EIP: [<c02a39c0>]dev_driver_string+0x0/0x29SS:ESP 0068:ec041de0
Hi Alexey,
thanks, now my machine boots, the VT8623 is now recognized correctly on bootup.
will this issue be reverted or corrected with a 2.6.26.1?
thanks!
kind regards, Alois
Quoted 59 lines · Alexey Dobriyan
Quoted 4 lines · On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
Of course,
info->devis NULL, info was just kzallocated!Do
git-revert 20e061fb750d36ec0ffcb2e44ed7dafa9018223brebuild, reboot to confirm.
Quoted 41 lines
BUG: unable to handle kernel NULL pointer dereference at 000000b8 IP: [<c02a39c0>] dev_driver_string+0x0/0x29 *pde = 00000000 Oops: 0000 [#1] Modules linked in: vt8623fb(+) svgalib vgastate budget_av saa7146_vv videobuf_dma_sg videobuf_core budget_core saa7146 ttpci_eeprom tda10021 tda10023 tda1004xPid: 3657, comm: modprobe Not tainted (2.6.26 #5)
EIP: 0060:[<c02a39c0>] EFLAGS: 00010286 CPU: 0
EIP is atdev_driver_string+0x0/0x29
EAX: 00000000 EBX:f8e57e00ECX: 00000010 EDX: 00000004
ESI:0000008cEDI:f5fe9c00EBP: 00000000 ESP:ec041de0
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process modprobe (pid: 3657, ti=ec040000 task=ec03d8d0 task.ti=ec040000)Stack: f8e56408 f7d44000 c0185b44 f5fe9e34 00000010 04d440b4 000719d4 f8e57e90 f8e57e60 f7d44000 c02a5daa c0250f4a f7d4404c 00000000 f8e57e90 c02a5d34 f7d4404c f7d440f4 f8e57e90 c02a5de1 00000000 f8e57e90 f8e57e90 c02a560d Call Trace: [<f8e56408>] vt8623_pci_probe+0x283/0x45b [vt8623fb] [<c0185b44>] sysfs_create_link+0x85/0xc5 [<c02a5daa>] __driver_attach+0x0/0x55 [<c0250f4a>] pci_device_probe+0x36/0x57 [<c02a5d34>] driver_probe_device+0xb4/0x12a [<c02a5de1>] __driver_attach+0x37/0x55 [<c02a560d>] bus_for_each_dev+0x34/0x56 [<c02a5bd0>] driver_attach+0x11/0x13 [<c02a5daa>] __driver_attach+0x0/0x55 [<c02a5963>] bus_add_driver+0x8a/0x1a7 [<c02419f0>] kset_find_obj+0x18/0x40 [<c02a5f39>] driver_register+0x6d/0xc1 [<c02510e0>] __pci_register_driver+0x2b/0x57 [<c012f73f>] sys_init_module+0x14cd/0x161e [<c0110b49>] do_page_fault+0x228/0x537 [<c024265d>] prio_tree_insert+0x1b/0x1dd [<f8e4a021>] svga_tilecopy+0x0/0x100 [svgalib] [<c01035c1>] sysenter_past_esp+0x6a/0x99 ======================= Code: 5a 85 c0 59 79 20 68 24 d7 5d c0 b9 1b 87 4a c0 31 d2 b8 e8 0e 4e c0 53 e8 09 47 e7 ff 5a 59 eb 05 b8 ed ff ff ff 5b c3 90 90 90 <8b> 90 b8 00 00 00 85 d2 75 0a 8b 90 b4 00 00 00 85 d2 74 03 8b EIP: [<c02a39c0>] dev_driver_string+0x0/0x29 SS:ESP 0068:ec041de0
Quoted 8 lines · On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
Hi!
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
drivers/video/arkfb.c +9 -9
@@ -958,20 +958,20 @@ static int __devinit ark_pci_probe(struc/* Prepare PCI device */ rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"arkfb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; } par->dac =ics5342_init (ark_dac_read_regs, ark_dac_write_regs, info);if (! par->dac) { rc = -ENOMEM ; -dev_err (info->dev,"RAMDAC initialization failed\n" ); +dev_err (info->device,"RAMDAC initialization failed\n" ); goto err_dac; }
@@ -982,7 +982,7 @@ static int __devinit ark_pci_probe(struc info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap; }
@@ -1004,19 +1004,19 @@ static int __devinit ark_pci_probe(struc rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebugger\n" ); +dev_err (info->device,"cannot register framebugger\n" ); goto err_reg_fb; }
@@ -1090,7 +1090,7 @@ static int ark_pci_suspend (struct pci_dstruct fb_info *info =pci_get_drvdata (dev);struct arkfb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
@@ -1121,7 +1121,7 @@ static int ark_pci_resume (struct pci_destruct fb_info *info =pci_get_drvdata (dev);struct arkfb_info *par = info->par; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
drivers/video/s3fb.c +9 -9
@@ -903,13 +903,13 @@ static int __devinit s3_pci_probe(struct/* Prepare PCI device */ rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"s3fb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; }
@@ -921,7 +921,7 @@ static int __devinit s3_pci_probe(struct info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap; }
@@ -965,19 +965,19 @@ static int __devinit s3_pci_probe(struct rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebuffer\n" ); +dev_err (info->device,"cannot register framebuffer\n" ); goto err_reg_fb; }
@@ -1053,7 +1053,7 @@ static int s3_pci_suspend(struct pci_devstruct fb_info *info =pci_get_drvdata (dev);struct s3fb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
@@ -1085,7 +1085,7 @@ static int s3_pci_resume(struct pci_dev*struct s3fb_info *par = info->par;int err; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
@@ -1102,7 +1102,7 @@ static int s3_pci_resume(struct pci_dev*if (err) {mutex_unlock (&(par->open_lock));release_console_sem (); -dev_err (info->dev,"error %d enabling device for resume\n" , err); +dev_err (info->device,"error %d enabling device for resume\n" , err);return err; }pci_set_master (dev);
drivers/video/vt8623fb.c +10 -10
@@ -677,13 +677,13 @@ static int __devinit vt8623_pci_probe(st rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"vt8623fb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; }
@@ -696,14 +696,14 @@ static int __devinit vt8623_pci_probe(st info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap_1; } par->mmio_base =pci_iomap (dev,1 ,0 );if (! par->mmio_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for MMIO failed\n" ); +dev_err (info->device,"iomap for MMIO failed\n" ); goto err_iomap_2; }
@@ -714,7 +714,7 @@ static int __devinit vt8623_pci_probe(stif ((16 <= memsize1) && (memsize1 <=64 ) && (memsize1 == memsize2)) info->screen_size = memsize1 <<20 ;else { -dev_err (info->dev,"memory size detection failed (%x %x), suppose 16 MB\n" , memsize1, memsize2); +dev_err (info->device,"memory size detection failed (%x %x), suppose 16 MB\n" , memsize1, memsize2); info->screen_size =16 <<20 ; }
@@ -731,19 +731,19 @@ static int __devinit vt8623_pci_probe(st rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebugger\n" ); +dev_err (info->device,"cannot register framebugger\n" ); goto err_reg_fb; }
@@ -817,7 +817,7 @@ static int vt8623_pci_suspend(struct pcistruct fb_info *info =pci_get_drvdata (dev);struct vt8623fb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
@@ -848,7 +848,7 @@ static int vt8623_pci_resume(struct pci_struct fb_info *info =pci_get_drvdata (dev);struct vt8623fb_info *par = info->par; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
Signature · 11 lines
Elen sila lumenn' omentielvo Ondrej 'SanTiago' Zajicek (email: [email protected]) OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net) "To err is human -- to blame it on a computer is even more so." ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/
Hi!
this patch fixed my problem completly.
thanks a lot!
kind regards, Alois
Quoted 251 lines · Ondrej Zajicek
Quoted 6 lines · On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
Hi!
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
Signed-off-by Ondrej Zajicek <[email protected]>diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff
linux-2.6.26-orig/drivers/video/arkfb.clinux-2.6.26/drivers/video/arkfb.cdrivers/video/arkfb.c +9
-9@@ -958,20 +958,20 @@ static int __devinit ark_pci_probe(struc/* Prepare PCI device */ rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"arkfb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; } par->dac =ics5342_init (ark_dac_read_regs, ark_dac_write_regs, info);if (! par->dac) { rc = -ENOMEM ; -dev_err (info->dev,"RAMDAC initialization failed\n" ); +dev_err (info->device,"RAMDAC initialization failed\n" ); goto err_dac; }@@ -982,7 +982,7 @@ static int __devinit ark_pci_probe(struc info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap; }@@ -1004,19 +1004,19 @@ static int __devinit ark_pci_probe(struc rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebugger\n" ); +dev_err (info->device,"cannot register framebugger\n" ); goto err_reg_fb; }@@ -1090,7 +1090,7 @@ static int ark_pci_suspend (struct pci_dstruct fb_info *info =pci_get_drvdata (dev);struct arkfb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));@@ -1121,7 +1121,7 @@ static int ark_pci_resume (struct pci_destruct fb_info *info =pci_get_drvdata (dev);struct arkfb_info *par = info->par; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff
linux-2.6.26-orig/drivers/video/s3fb.clinux-2.6.26/drivers/video/s3fb.cdrivers/video/s3fb.c +9
-9@@ -903,13 +903,13 @@ static int __devinit s3_pci_probe(struct/* Prepare PCI device */ rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"s3fb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; }@@ -921,7 +921,7 @@ static int __devinit s3_pci_probe(struct info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap; }@@ -965,19 +965,19 @@ static int __devinit s3_pci_probe(struct rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebuffer\n" ); +dev_err (info->device,"cannot register framebuffer\n" ); goto err_reg_fb; }@@ -1053,7 +1053,7 @@ static int s3_pci_suspend(struct pci_devstruct fb_info *info =pci_get_drvdata (dev);struct s3fb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));@@ -1085,7 +1085,7 @@ static int s3_pci_resume(struct pci_dev*struct s3fb_info *par = info->par;int err; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));@@ -1102,7 +1102,7 @@ static int s3_pci_resume(struct pci_dev*if (err) {mutex_unlock (&(par->open_lock));release_console_sem (); -dev_err (info->dev,"error %d enabling device for resume\n" , err); +dev_err (info->device,"error %d enabling device for resume\n" , err);return err; }pci_set_master (dev);diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff
linux-2.6.26-orig/drivers/video/vt8623fb.clinux-2.6.26/drivers/video/vt8623fb.cdrivers/video/vt8623fb.c +9
-9@@ -677,13 +677,13 @@ static int __devinit vt8623_pci_probe(st rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"vt8623fb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; }@@ -696,14 +696,14 @@ static int __devinit vt8623_pci_probe(st info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap_1; } par->mmio_base =pci_iomap (dev,1 ,0 );if (! par->mmio_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for MMIO failed\n" ); +dev_err (info->device,"iomap for MMIO failed\n" ); goto err_iomap_2; }@@ -714,7 +714,7 @@ static int __devinit vt8623_pci_probe(stif ((16 <= memsize1) && (memsize1 <=64 ) && (memsize1 == memsize2)) info->screen_size = memsize1 <<20 ;else { -dev_err (info->dev,"memory size detection failed (%x %x), suppose 16 MB\n" , memsize1, memsize2); +dev_err (info->device,"memory size detection failed (%x %x), suppose 16 MB\n" , memsize1, memsize2); info->screen_size =16 <<20 ; }@@ -731,19 +731,19 @@ static int __devinit vt8623_pci_probe(st rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebugger\n" ); +dev_err (info->device,"cannot register framebugger\n" ); goto err_reg_fb; }@@ -817,7 +817,7 @@ static int vt8623_pci_suspend(struct pcistruct fb_info *info =pci_get_drvdata (dev);struct vt8623fb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
drivers/video/vt8623fb.c static int vt8623_pci_resume(struct pci_ · line 854
Quoted 8 lines
drivers/video/vt8623fb.c +1
-1@@ -848,7 +848,7 @@ static int vt8623_pci_resume(struct pci_struct fb_info *info =pci_get_drvdata (dev);struct vt8623fb_info *par = info->par; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Linux-fbdev-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
Hi!
this patch fixed my problem completly.
thanks a lot!
kind regards, Alois
Quoted 259 lines · Ondrej Zajicek
Quoted 6 lines · On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
Hi!
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
Signed-off-by Ondrej Zajicek <[email protected]>diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff
linux-2.6.26-orig/drivers/video/arkfb.clinux-2.6.26/drivers/video/arkfb.cdrivers/video/arkfb.c +9
-9@@ -958,20 +958,20 @@ static int __devinit ark_pci_probe(struc/* Prepare PCI device */ rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"arkfb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; } par->dac =ics5342_init (ark_dac_read_regs, ark_dac_write_regs, info);if (! par->dac) { rc = -ENOMEM ; -dev_err (info->dev,"RAMDAC initialization failed\n" ); +dev_err (info->device,"RAMDAC initialization failed\n" ); goto err_dac; }@@ -982,7 +982,7 @@ static int __devinit ark_pci_probe(struc info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap; }@@ -1004,19 +1004,19 @@ static int __devinit ark_pci_probe(struc rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebugger\n" ); +dev_err (info->device,"cannot register framebugger\n" ); goto err_reg_fb; }@@ -1090,7 +1090,7 @@ static int ark_pci_suspend (struct pci_dstruct fb_info *info =pci_get_drvdata (dev);struct arkfb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));@@ -1121,7 +1121,7 @@ static int ark_pci_resume (struct pci_destruct fb_info *info =pci_get_drvdata (dev);struct arkfb_info *par = info->par; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff
linux-2.6.26-orig/drivers/video/s3fb.clinux-2.6.26/drivers/video/s3fb.cdrivers/video/s3fb.c +9
-9@@ -903,13 +903,13 @@ static int __devinit s3_pci_probe(struct/* Prepare PCI device */ rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"s3fb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; }@@ -921,7 +921,7 @@ static int __devinit s3_pci_probe(struct info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap; }@@ -965,19 +965,19 @@ static int __devinit s3_pci_probe(struct rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebuffer\n" ); +dev_err (info->device,"cannot register framebuffer\n" ); goto err_reg_fb; }@@ -1053,7 +1053,7 @@ static int s3_pci_suspend(struct pci_devstruct fb_info *info =pci_get_drvdata (dev);struct s3fb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));@@ -1085,7 +1085,7 @@ static int s3_pci_resume(struct pci_dev*struct s3fb_info *par = info->par;int err; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));@@ -1102,7 +1102,7 @@ static int s3_pci_resume(struct pci_dev*if (err) {mutex_unlock (&(par->open_lock));release_console_sem (); -dev_err (info->dev,"error %d enabling device for resume\n" , err); +dev_err (info->device,"error %d enabling device for resume\n" , err);return err; }pci_set_master (dev);diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff
linux-2.6.26-orig/drivers/video/vt8623fb.clinux-2.6.26/drivers/video/vt8623fb.cdrivers/video/vt8623fb.c +10
-10@@ -677,13 +677,13 @@ static int __devinit vt8623_pci_probe(st rc =pci_enable_device (dev);if (rc <0 ) { -dev_err (info->dev,"cannot enable PCI device\n" ); +dev_err (info->device,"cannot enable PCI device\n" ); goto err_enable_device; } rc =pci_request_regions (dev,"vt8623fb" );if (rc <0 ) { -dev_err (info->dev,"cannot reserve framebuffer region\n" ); +dev_err (info->device,"cannot reserve framebuffer region\n" ); goto err_request_regions; }@@ -696,14 +696,14 @@ static int __devinit vt8623_pci_probe(st info->screen_base =pci_iomap (dev,0 ,0 );if (! info->screen_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for framebuffer failed\n" ); +dev_err (info->device,"iomap for framebuffer failed\n" ); goto err_iomap_1; } par->mmio_base =pci_iomap (dev,1 ,0 );if (! par->mmio_base) { rc = -ENOMEM ; -dev_err (info->dev,"iomap for MMIO failed\n" ); +dev_err (info->device,"iomap for MMIO failed\n" ); goto err_iomap_2; }@@ -714,7 +714,7 @@ static int __devinit vt8623_pci_probe(stif ((16 <= memsize1) && (memsize1 <=64 ) && (memsize1 == memsize2)) info->screen_size = memsize1 <<20 ;else { -dev_err (info->dev,"memory size detection failed (%x %x), suppose 16 MB\n" , memsize1, memsize2); +dev_err (info->device,"memory size detection failed (%x %x), suppose 16 MB\n" , memsize1, memsize2); info->screen_size =16 <<20 ; }@@ -731,19 +731,19 @@ static int __devinit vt8623_pci_probe(st rc =fb_find_mode (&(info->var), info, mode_option,NULL ,0 ,NULL ,8 );if (! ((rc ==1 ) || (rc ==2 ))) { rc = -EINVAL ; -dev_err (info->dev,"mode %s not found\n" , mode_option); +dev_err (info->device,"mode %s not found\n" , mode_option); goto err_find_mode; } rc =fb_alloc_cmap (&info->cmap,256 ,0 );if (rc <0 ) { -dev_err (info->dev,"cannot allocate colormap\n" ); +dev_err (info->device,"cannot allocate colormap\n" ); goto err_alloc_cmap; } rc =register_framebuffer (info);if (rc <0 ) { -dev_err (info->dev,"cannot register framebugger\n" ); +dev_err (info->device,"cannot register framebugger\n" ); goto err_reg_fb; }@@ -817,7 +817,7 @@ static int vt8623_pci_suspend(struct pcistruct fb_info *info =pci_get_drvdata (dev);struct vt8623fb_info *par = info->par; -dev_info (info->dev,"suspend\n" ); +dev_info (info->device,"suspend\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));@@ -848,7 +848,7 @@ static int vt8623_pci_resume(struct pci_struct fb_info *info =pci_get_drvdata (dev);struct vt8623fb_info *par = info->par; -dev_info (info->dev,"resume\n" ); +dev_info (info->device,"resume\n" );acquire_console_sem ();mutex_lock (&(par->open_lock));
Quoted 6 lines · On Thu, 17 Jul 2008 03:39:18 +0200 Ondrej Zajicek <[email protected]>…
Quoted 5 lines · On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
Hi!
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
Quoted 7 lines
Quoted 3 lines
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
Signed-off-by Ondrej Zajicek <[email protected]>
I went back through the email thread and wrote your changelog for you. Not a very good one though.
It would be better were you to write your changelogs, please.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
Hi!
This issue is still not fixed in 2.6.26.1 - may be there a way to commit it in 2.6.26.2?
Still, the provided patch I got on 07/17/2008 works great ...
Thanks, anyway!
kind regards, Alois
Quoted 16 lines · Andrew Morton
Quoted 13 lines · On Thu, 17 Jul 2008 03:39:18 +0200 Ondrej Zajicek <[email protected]>…
Quoted 9 lines · On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
Hi!
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
Quoted 10 lines
Quoted 2 lines
Signed-off-by Ondrej Zajicek <[email protected]>I went back through the email thread and wrote your changelog for you. Not a very good one though.
It would be better were you to write your changelogs, please.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
Quoted 29 lines · On Tue, 05 Aug 2008 13:17:39 +0200 "[email protected]"…
Quoted 16 lines · Andrew Morton
Quoted 13 lines · On Thu, 17 Jul 2008 03:39:18 +0200 Ondrej Zajicek <[email protected]>…
Quoted 9 lines · On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
Hi!
I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a problem.
If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel.
I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
Quoted 8 lines
Quoted 2 lines
Signed-off-by Ondrej Zajicek <[email protected]>I went back through the email thread and wrote your changelog for you. Not a very good one though.
It would be better were you to write your changelogs, please.
Hi!
Quoted 9 lines
This issue is still not fixed in 2.6.26.1 - may be there a way to commit it in 2.6.26.2?
Still, the provided patch I got on 07/17/2008 works great ...
Thanks, anyway!
kind regards, Alois
(top-posting repaired)
The fix will be in my next batch for Linus. It'll be merged this week.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/