Floppy access by dd fails for 2.6.26-rc2 to final, possibly even earlier
Greetings;
I just been advised by private email that I an not the only one who has lost the use of his floppy drive via dd. The corresponder noted that he had a copy of DSL with a 2.4.something kernel, and his drive worked flawlessly while booted to DSL.
So now there are at least 2 floppy users wandering in the wilderness looking for water. We need it to support 20 year old computers without a TCP stack or network cards.
Who is the floppy.c maintainer these days?
Signature · 6 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) For fools rush in where angels fear to tread. -- Alexander Pope
Quoted 8 lines · Gene Heskett
I just been advised by private email that I an not the only one who has lost the use of his floppy drive via dd. The corresponder noted that he had a copy of DSL with a 2.4.something kernel, and his drive worked flawlessly while booted to DSL.
So now there are at least 2 floppy users wandering in the wilderness looking for water. We need it to support 20 year old computers without a TCP stack or network cards.
I guess I'll chime in. I'm not sure this is the same problem or not, but my Alpha AS1000a (EV56 5/400) has never successfully been able to read the floppy. I always get garbage. The drive does work as I can use the RCU from floppy from the Arc BIOS.
Linux sees this device as a 2.88mb floppy. It is a 1.44mb and the information in the Arc BIOS is set to 1.44mb (I don't think it matters, I boot from SRM, not sure how to set the floppy there)
I also do not see any errors or other useful messages in the logs.
Jun 1 15:23:06 narf kernel: [4262383.309846] Floppy drive(s): fd0 is 2.88M Jun 1 15:23:06 narf kernel: [4262383.324494] FDC 0 is a National Semiconductor PC87306
I tried forcing to use a specific type:
Jun 1 16:21:38 narf kernel: [4194206.301784] floppy0: setting CMOS code to 4 Jun 1 16:21:38 narf kernel: [4194206.301784] Floppy drive(s): fd0 is 1.44M Jun 1 16:21:38 narf kernel: [4194206.314479] FDC 0 is a National Semiconductor PC87306
But that failed even worse with errors on sector 0. (NOTE the floppy was good)
Signature · 2 lines
Lab tests show that use of micro$oft causes cancer in lab animals Got Gas???
Quoted 15 lines · Wakko Warner
Quoted 8 lines · Gene Heskett
I just been advised by private email that I an not the only one who has lost the use of his floppy drive via dd. The corresponder noted that he had a copy of DSL with a 2.4.something kernel, and his drive worked flawlessly while booted to DSL.
So now there are at least 2 floppy users wandering in the wilderness looking for water. We need it to support 20 year old computers without a TCP stack or network cards.
I guess I'll chime in. I'm not sure this is the same problem or not, but my Alpha AS1000a (EV56 5/400) has never successfully been able to read the floppy. I always get garbage. The drive does work as I can use the RCU from floppy from the Arc BIOS.
Quoted 6 lines
Linux sees this device as a 2.88mb floppy. It is a 1.44mb and the information in the Arc BIOS is set to 1.44mb (I don't think it matters, I boot from SRM, not sure how to set the floppy there)
I also do not see any errors or other useful messages in the logs.
Neither do I. It registers as
Jul 20 22:56:59 coyote kernel: [ 16.297661] Floppy drive(s): fd0 is 1.44M Jul 20 22:56:59 coyote kernel: [ 16.312758] FDC 0 is a post-1991 82077
Quoted 4 lines
Jun 1 15:23:06 narf kernel: [4262383.309846] Floppy drive(s): fd0 is 2.88M Jun 1 15:23:06 narf kernel: [4262383.324494] FDC 0 is a NationalSemiconductor PC87306
Quoted 8 lines
I tried forcing to use a specific type:
Jun 1 16:21:38 narf kernel: [4194206.301784] floppy0: setting CMOS code to4 Jun 1 16:21:38 narf kernel: [4194206.301784] Floppy drive(s): fd0 is 1.44M Jun 1 16:21:38 narf kernel: [4194206.314479] FDC 0 is a National Semiconductor PC87306
But that failed even worse with errors on sector 0. (NOTE the floppy was good)
Glad to know I'm not the only one, there are 3 of us now.
Thanks Wakko.
Signature · 6 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Absence makes the heart grow fonder. -- Sextus Aurelius
Quoted 35 lines · Gene Heskett
Quoted 17 lines · Wakko Warner
Quoted 8 lines · Gene Heskett
I just been advised by private email that I an not the only one who has lost the use of his floppy drive via dd. The corresponder noted that he had a copy of DSL with a 2.4.something kernel, and his drive worked flawlessly while booted to DSL.
So now there are at least 2 floppy users wandering in the wilderness looking for water. We need it to support 20 year old computers without a TCP stack or network cards.
I guess I'll chime in. I'm not sure this is the same problem or not, but my Alpha AS1000a (EV56 5/400) has never successfully been able to read the floppy. I always get garbage. The drive does work as I can use the RCU from floppy from the Arc BIOS.
Linux sees this device as a 2.88mb floppy. It is a 1.44mb and the information in the Arc BIOS is set to 1.44mb (I don't think it matters, I boot from SRM, not sure how to set the floppy there)Quoted 2 lines
I also do not see any errors or other useful messages in the logs.
Neither do I. It registers as
Jul 20 22:56:59 coyote kernel: [ 16.297661] Floppy drive(s): fd0 is 1.44M Jul 20 22:56:59 coyote kernel: [ 16.312758] FDC 0 is a post-1991 82077Quoted 10 lines
Jun 1 15:23:06 narf kernel: [4262383.309846] Floppy drive(s): fd0 is 2.88M Jun 1 15:23:06 narf kernel: [4262383.324494] FDC 0 is a NationalSemiconductor PC87306
I tried forcing to use a specific type:
Jun 1 16:21:38 narf kernel: [4194206.301784] floppy0: setting CMOS code to4 Jun 1 16:21:38 narf kernel: [4194206.301784] Floppy drive(s): fd0 is 1.44M Jun 1 16:21:38 narf kernel: [4194206.314479] FDC 0 is a National Semiconductor PC87306
Quoted 4 lines
Quoted 2 lines
But that failed even worse with errors on sector 0. (NOTE the floppy was good)
Glad to know I'm not the only one, there are 3 of us now.
Am not reproducing on 2.6.26, so it's at least not just everyone. Normal floppy works fine here:
root@7ixe4:~# mkfs.minix /dev/fd0 480 inodes 1440 blocks Firstdatazone=19 (19) Zonesize=1024 Maxsize=268966912
root@7ixe4:~# mount /dev/fd0 /mnt/floppy root@7ixe4:~# echo BAR >/mnt/floppy/FOO root@7ixe4:~# umount /mnt/floppy root@7ixe4:~# dd if=/dev/fd0 of=floppy.img 2880+0 records in 2880+0 records out 1474560 bytes (1.5 MB) copied, 48.1893 s, 30.6 kB/s root@7ixe4:~# mount -o loop floppy.img /mnt/floppy root@7ixe4:~# cat /mnt/floppy/FOO BAR root@7ixe4:~# umount /mnt/floppy root@7ixe4:~# dd if=floppy.img of=/dev/fd0 2880+0 records in 2880+0 records out 1474560 bytes (1.5 MB) copied, 99.3359 s, 14.8 kB/s root@7ixe4:~# mount /dev/fd0 /mnt/floppy root@7ixe4:~# cat /mnt/floppy/FOO BAR
Rene.
Quoted 62 lines · Rene Herman
Quoted 35 lines · Gene Heskett
Quoted 17 lines · Wakko Warner
Quoted 8 lines · Gene Heskett
I just been advised by private email that I an not the only one who has lost the use of his floppy drive via dd. The corresponder noted that he had a copy of DSL with a 2.4.something kernel, and his drive worked flawlessly while booted to DSL.
So now there are at least 2 floppy users wandering in the wilderness looking for water. We need it to support 20 year old computers without a TCP stack or network cards.
I guess I'll chime in. I'm not sure this is the same problem or not, but my Alpha AS1000a (EV56 5/400) has never successfully been able to read the floppy. I always get garbage. The drive does work as I can use the RCU from floppy from the Arc BIOS.
Linux sees this device as a 2.88mb floppy. It is a 1.44mb and the information in the Arc BIOS is set to 1.44mb (I don't think it matters, I boot from SRM, not sure how to set the floppy there)Quoted 2 lines
I also do not see any errors or other useful messages in the logs.
Neither do I. It registers as
Jul 20 22:56:59 coyote kernel: [ 16.297661] Floppy drive(s): fd0 is 1.44M Jul 20 22:56:59 coyote kernel: [ 16.312758] FDC 0 is a post-1991 82077Quoted 10 lines
Jun 1 15:23:06 narf kernel: [4262383.309846] Floppy drive(s): fd0 is 2.88M Jun 1 15:23:06 narf kernel: [4262383.324494] FDC 0 is a NationalSemiconductor PC87306
I tried forcing to use a specific type:
Jun 1 16:21:38 narf kernel: [4194206.301784] floppy0: setting CMOS code to4 Jun 1 16:21:38 narf kernel: [4194206.301784] Floppy drive(s): fd0 is 1.44M Jun 1 16:21:38 narf kernel: [4194206.314479] FDC 0 is a National Semiconductor PC87306
Quoted 4 lines
Quoted 2 lines
But that failed even worse with errors on sector 0. (NOTE the floppy was good)
Glad to know I'm not the only one, there are 3 of us now.
Am not reproducing on 2.6.26, so it's at least not just everyone. Normal floppy works fine here:
root@7ixe4:~# mkfs.minix /dev/fd0 480 inodes 1440 blocks Firstdatazone=19 (19) Zonesize=1024 Maxsize=268966912root@7ixe4:~# mount /dev/fd0 /mnt/floppy root@7ixe4:~# echo BAR >/mnt/floppy/FOO root@7ixe4:~# umount /mnt/floppy root@7ixe4:~# dd if=/dev/fd0 of=floppy.img 2880+0 records in 2880+0 records out 1474560 bytes (1.5 MB) copied, 48.1893 s, 30.6 kB/s root@7ixe4:~# mount -o loop floppy.img /mnt/floppy root@7ixe4:~# cat /mnt/floppy/FOO BAR
Quoted 8 lines
root@7ixe4:~# umount /mnt/floppy root@7ixe4:~# dd if=floppy.img of=/dev/fd0 2880+0 records in 2880+0 records out 1474560 bytes (1.5 MB) copied, 99.3359 s, 14.8 kB/s root@7ixe4:~# mount /dev/fd0 /mnt/floppy root@7ixe4:~# cat /mnt/floppy/FOO BAR
Works here for ext2 and msdos, but I'm running on the linux box used to test.
Grant.
Quoted 2 lines
Rene.