OMAP3 clock: fix 96MHz clocks, usbhost_120m_fclk enable
Paul Walmsley
maintainercover OMAP3 clock: fix 96MHz clocks, usbhost_120m_fclk enable
This series fixes a few bugs in the OMAP3 clock tree. The most noticeable difference is that the "Clock usbhost_48m_fck didn't enable in 100000 tries" no longer appears during boot.
---
text data bss dec hex filename
3391587 157104 107136 3655827 37c893 vmlinux.3430sdp.orig 3391683 157104 107136 3655923 37c8f3 vmlinux.3430sdp.new
arch/arm/mach-omap2/clock.c | 63 ++++++++++++++++++--------------- arch/arm/mach-omap2/clock34xx.h | 60 ++++++++++++++++++++----------- arch/arm/mach-omap2/cm-regbits-34xx.h | 10 ++++- 3 files changed, 80 insertions(+), 53 deletions(-)
Paul Walmsley
maintainerPATCH 1/2 OMAP3 clock: fix 96MHz clocks
Fix some bugs in the OMAP3 clock tree pertaining to the 96MHz clocks. The 96MHz portion of the clock tree should now have reasonable fidelity to the 34xx TRM Rev I.
One remaining question mark: it's not clear exactly which 96MHz source clock the USIM uses. This patch sticks with the previous setting, which seems reasonable.
---
arch/arm/mach-omap2/clock34xx.h | 60 +++++++++++++++++++++------------ arch/arm/mach-omap2/cm-regbits-34xx.h | 8 +++- 2 files changed, 44 insertions(+), 24 deletions(-)
arch/arm/mach-omap2/clock34xx.h +38 -22
@@ -661,6 +661,12 @@ static const struct clksel omap_96m_alwon_fck_clksel[] = { { .parent = NULL } }; +/* +* DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as +* PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: +* 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and +* CM_96K_(F)CLK. +*/ static struct clk omap_96m_alwon_fck = { .name ="omap_96m_alwon_fck" , .parent = &dpll4_m2x2_ck,
@@ -669,31 +675,41 @@ static struct clk omap_96m_alwon_fck = { .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK, .clksel = omap_96m_alwon_fck_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | - PARENT_CONTROLS_CLOCK, + PARENT_CONTROLS_CLOCK, .recalc = &omap2_clksel_recalc, }; -static struct clk omap_96m_fck = { - .name ="omap_96m_fck" , +static struct clk cm_96m_fck = { + .name ="cm_96m_fck" , .parent = &omap_96m_alwon_fck, .flags =CLOCK_IN_OMAP343X |RATE_PROPAGATES |PARENT_CONTROLS_CLOCK , .recalc = &followparent_recalc, }; -static const struct clksel cm_96m_fck_clksel[] = { - { .parent = &sys_ck, .rates = dpll_bypass_rates }, - { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates }, +static const struct clksel_rate omap_96m_dpll_rates[] = { + { .div =1 , .val =0 , .flags =RATE_IN_343X |DEFAULT_RATE }, + { .div =0 } +}; + +static const struct clksel_rate omap_96m_sys_rates[] = { + { .div =1 , .val =1 , .flags =RATE_IN_343X |DEFAULT_RATE }, + { .div =0 } +}; + +static const struct clksel omap_96m_fck_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, + { .parent = &sys_ck, .rates = omap_96m_sys_rates }, { .parent =NULL } }; -static struct clk cm_96m_fck = { - .name ="cm_96m_fck" , - .parent = &dpll4_m2x2_ck, +static struct clk omap_96m_fck = { + .name ="omap_96m_fck" , + .parent = &sys_ck, .init = &omap2_init_clksel_parent, - .clksel_reg =_OMAP34XX_CM_REGADDR (PLL_MOD ,CM_IDLEST ), - .clksel_mask =OMAP3430_ST_PERIPH_CLK_MASK , - .clksel = cm_96m_fck_clksel, + .clksel_reg =_OMAP34XX_CM_REGADDR (PLL_MOD ,CM_CLKSEL1 ), + .clksel_mask =OMAP3430_SOURCE_96M_MASK , + .clksel = omap_96m_fck_clksel, .flags =CLOCK_IN_OMAP343X |RATE_PROPAGATES |PARENT_CONTROLS_CLOCK , .recalc = &omap2_clksel_recalc,
@@ -761,14 +777,14 @@ static struct clk omap_54m_fck = { .name = "omap_54m_fck", .init = &omap2_init_clksel_parent, .clksel_reg = _OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_54M, + .clksel_mask = OMAP3430_SOURCE_54M_MASK, .clksel = omap_54m_clksel, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | PARENT_CONTROLS_CLOCK, .recalc = &omap2_clksel_recalc, }; -static const struct clksel_rate omap_48m_96md2_rates[] = { +static const struct clksel_rate omap_48m_cm96m_rates[] = { { .div =2 , .val =0 , .flags =RATE_IN_343X |DEFAULT_RATE }, { .div =0 } };
@@ -779,7 +795,7 @@ static const struct clksel_rate omap_48m_alt_rates[] = { };static const struct clksel omap_48m_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates }, + { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, { .parent =NULL } };
@@ -788,7 +804,7 @@ static struct clk omap_48m_fck = { .name = "omap_48m_fck", .init = &omap2_init_clksel_parent, .clksel_reg = _OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_48M, + .clksel_mask = OMAP3430_SOURCE_48M_MASK, .clksel = omap_48m_clksel, .flags =CLOCK_IN_OMAP343X |RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
@@ -976,10 +992,10 @@ static const struct clksel_rate clkout2_src_54m_rates[] = { };static const struct clksel clkout2_src_clksel[] = { - { .parent = &core_ck, .rates = clkout2_src_core_rates }, - { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, - { .parent = &omap_96m_alwon_fck, .rates = clkout2_src_96m_rates }, - { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, + { .parent = &core_ck, .rates = clkout2_src_core_rates }, + { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, + { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, + { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, { .parent =NULL } };
@@ -2807,8 +2823,8 @@ static struct clk mcbsp4_ick = { };static const struct clksel mcbsp_234_clksel[] = { - { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, { .parent =NULL } };
arch/arm/mach-omap2/cm-regbits-34xx.h +6 -2
@@ -457,8 +457,12 @@#define OMAP3430_CORE_DPLL_MULT_MASK (0x7ff << 16)#define OMAP3430_CORE_DPLL_DIV_SHIFT 8#define OMAP3430_CORE_DPLL_DIV_MASK (0x7f << 8) -#define OMAP3430_SOURCE_54M (1 << 5) -#define OMAP3430_SOURCE_48M (1 << 3) +#define OMAP3430_SOURCE_96M_SHIFT 6 +#define OMAP3430_SOURCE_96M_MASK (1 << 6) +#define OMAP3430_SOURCE_54M_SHIFT 5 +#define OMAP3430_SOURCE_54M_MASK (1 << 5) +#define OMAP3430_SOURCE_48M_SHIFT 3 +#define OMAP3430_SOURCE_48M_MASK (1 << 3)/* CM_CLKSEL2_PLL */ #define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8
Paul Walmsley
maintainerPATCH 2/2 OMAP3 clock: don't wait for USBHOST IDLEST bit on usbhost_120m_fclk enable
In reply to Paul WalmsleyUSBHOST on 3430ES2+ has both an initiator and a target CM_IDLEST bit. Previously, usbhost_48m_fclk enable waited on the wrong bit -- now fixed. Also, it appears that USBHOST module readiness (in terms of CM_IDLEST) only depends on usbhost_48m_fclk and usbhost_iclk. So don't wait on usbhost_120m_fck.
---
arch/arm/mach-omap2/clock.c | 63 ++++++++++++++++++--------------- arch/arm/mach-omap2/cm-regbits-34xx.h | 2 + 2 files changed, 36 insertions(+), 29 deletions(-)
arch/arm/mach-omap2/clock.c +34 -29
@@ -222,8 +222,8 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)*/ static void omap2_clk_wait_ready (struct clk *clk) { -u32 bit; -unsigned long reg, other_reg, st_reg, prcm_mod, prcm_regid; +u32 other_bit, idlest_bit; +unsigned long reg, other_reg, idlest_reg, prcm_mod, prcm_regid; reg = (unsigned long )clk->enable_reg; prcm_mod = reg & ~0xff ;
@@ -236,6 +236,10 @@ static void omap2_clk_wait_ready(struct clk *clk)else return ; +/* Covers most of the cases - a few exceptions are below */ + other_bit =1 << clk->enable_bit; + idlest_bit = other_bit; +/* 24xx: DSS and CAM have no idlest bits for their target agents */ if (cpu_is_omap24xx() && (prcm_mod == OMAP2420_CM_REGADDR(CORE_MOD, 0) ||
@@ -253,11 +257,15 @@ static void omap2_clk_wait_ready(struct clk *clk)if (cpu_is_omap34xx ()) {/* SSI */ -if (is_sil_rev_equal_to (OMAP3430_REV_ES1_0 ) && - prcm_mod ==OMAP34XX_CM_REGADDR (CORE_MOD ,0 ) && +if (prcm_mod ==OMAP34XX_CM_REGADDR (CORE_MOD ,0 ) && (reg &0x0f ) ==0 && - clk->enable_bit ==OMAP3430_EN_SSI_SHIFT ) -return ; + clk->enable_bit ==OMAP3430_EN_SSI_SHIFT ) { + +if (is_sil_rev_equal_to (OMAP3430_REV_ES1_0 )) +return ; + + idlest_bit =OMAP3430ES2_ST_SSI_IDLE ; + }/* DSS */ if (prcm_mod ==OMAP34XX_CM_REGADDR (OMAP3430_DSS_MOD ,0 )) {
@@ -272,38 +280,35 @@ static void omap2_clk_wait_ready(struct clk *clk)*/ if (clk->enable_bit !=OMAP3430_EN_DSS1_SHIFT )return ; + + idlest_bit =OMAP3430ES2_ST_DSS_IDLE ; } +/* USBHOST */ +if (is_sil_rev_greater_than (OMAP3430_REV_ES1_0 ) && + prcm_mod ==OMAP34XX_CM_REGADDR (OMAP3430ES2_USBHOST_MOD ,0 )) { + +/* +* The 120MHz clock apparently has nothing to do with +* USBHOST module accessibility +*/ +if (clk->enable_bit ==OMAP3430ES2_EN_USBHOST2_SHIFT ) +return ; + + idlest_bit =OMAP3430ES2_ST_USBHOST_IDLE ; + + } }/* Check if both functional and interface clocks * are running. */ - bit =1 << clk->enable_bit; -if (!(__raw_readl ((void __iomem *)other_reg) & bit)) +if (!(__raw_readl ((void __iomem *)other_reg) & other_bit))return ; -/* -* OMAP3430ES2+ has target idlest bits at unusual offsets for -* modules with both initiator and target agents -*/ -if (cpu_is_omap34xx ()) { - -/* SSI */ -if (prcm_mod ==OMAP34XX_CM_REGADDR (CORE_MOD ,0 ) && - (reg &0x0f ) ==0 && - clk->enable_bit ==OMAP3430_EN_SSI_SHIFT ) - bit =OMAP3430ES2_ST_SSI_IDLE ; - -/* DSS */ -if (prcm_mod ==OMAP34XX_CM_REGADDR (OMAP3430_DSS_MOD ,0 ) && - clk->enable_bit ==OMAP3430_EN_DSS1_SHIFT ) - bit =OMAP3430ES2_ST_DSS_IDLE ; - - } - - st_reg = ((other_reg & ~0xf0 ) |0x20 );/* CM_IDLEST* */ + idlest_reg = ((other_reg & ~0xf0 ) |0x20 );/* CM_IDLEST* */ -omap2_wait_clock_ready ((void __iomem *)st_reg, bit, clk->name); +omap2_wait_clock_ready ((void __iomem *)idlest_reg, idlest_bit, + clk->name); }/* Enables clock without considering parent dependencies or use count
arch/arm/mach-omap2/cm-regbits-34xx.h +2 -0
@@ -690,6 +690,8 @@#define OMAP3430ES2_EN_USBHOST_MASK (1 << 0)/* CM_IDLEST_USBHOST */ +#define OMAP3430ES2_ST_USBHOST_IDLE (1 << 1) +#define OMAP3430ES2_ST_USBHOST_STDBY (1 << 0)/* CM_AUTOIDLE_USBHOST */ #define OMAP3430ES2_AUTO_USBHOST_SHIFT 0
Tony Lindgren
maintainerQuoted 3 lines · Paul Walmsley
This series fixes a few bugs in the OMAP3 clock tree. The most noticeable difference is that the "Clock
usbhost_48m_fckdidn't enable in 100000 tries" no longer appears during boot.
Pushing these two today.
Tony
Quoted 17 lines
---
text data bss dec hex filename
3391587 157104 107136 3655827 37c893 vmlinux.3430sdp.orig 3391683 157104 107136 3655923 37c8f3 vmlinux.3430sdp.newarch/arm/mach-omap2/clock.c | 63 ++++++++++++++++++--------------- arch/arm/mach-omap2/clock34xx.h | 60 ++++++++++++++++++++----------- arch/arm/mach-omap2/cm-regbits-34xx.h | 10 ++++- 3 files changed, 80 insertions(+), 53 deletions(-)--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html