IDE SEEK_STAT flag

Index: hw/ide.c
===================================================================
@@ -1048,7 +1048,7 @@
 static void ide_atapi_cmd_ok(IDEState *s)
 {
     s->error = 0;
-    s->status = READY_STAT;
+    s->status = READY_STAT | SEEK_STAT;
     s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
     ide_set_irq(s);
 }

@@ -1162,7 +1162,7 @@
     if (s->packet_transfer_size <= 0) {
         /* end of transfer */
         ide_transfer_stop(s);
-        s->status = READY_STAT;
+        s->status = READY_STAT | SEEK_STAT;
         s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
         ide_set_irq(s);
 #ifdef DEBUG_IDE_ATAPI

@@ -1240,10 +1240,10 @@
     s->io_buffer_index = 0;
 
     if (s->atapi_dma) {
-    	s->status = READY_STAT | DRQ_STAT;
+    	s->status = READY_STAT | SEEK_STAT | DRQ_STAT;
 	ide_dma_start(s, ide_atapi_cmd_read_dma_cb);
     } else {
-    	s->status = READY_STAT;
+    	s->status = READY_STAT | SEEK_STAT;
     	ide_atapi_cmd_reply_end(s);
     }
 }

@@ -1258,7 +1258,7 @@
     s->io_buffer_index = sector_size;
     s->cd_sector_size = sector_size;
 
-    s->status = READY_STAT;
+    s->status = READY_STAT | SEEK_STAT;
     ide_atapi_cmd_reply_end(s);
 }
 

@@ -1299,7 +1299,7 @@
     }
 
     if (s->packet_transfer_size <= 0) {
-        s->status = READY_STAT;
+        s->status = READY_STAT | SEEK_STAT;
         s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
         ide_set_irq(s);
     eot:

@@ -1349,7 +1349,7 @@
     s->cd_sector_size = sector_size;
 
     /* XXX: check if BUSY_STAT should be set */
-    s->status = READY_STAT | DRQ_STAT | BUSY_STAT;
+    s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
     ide_dma_start(s, ide_atapi_cmd_read_dma_cb);
 }
 

@@ -2067,14 +2067,14 @@
             if (s->is_cf && s->nsector == 0) {
                 /* Disable Read and Write Multiple */
                 s->mult_sectors = 0;
-                s->status = READY_STAT;
+                s->status = READY_STAT | SEEK_STAT;
             } else if ((s->nsector & 0xff) != 0 &&
                 ((s->nsector & 0xff) > MAX_MULT_SECTORS ||
                  (s->nsector & (s->nsector - 1)) != 0)) {
                 ide_abort_command(s);
             } else {
                 s->mult_sectors = s->nsector & 0xff;
-                s->status = READY_STAT;
+                s->status = READY_STAT | SEEK_STAT;
             }
             ide_set_irq(s);
             break;

@@ -2084,7 +2084,7 @@
         case WIN_VERIFY_ONCE:
             /* do sector number check ? */
 	    ide_cmd_lba48_transform(s, lba48);
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s);
             break;
 	case WIN_READ_EXT:

@@ -2159,13 +2159,13 @@
         case WIN_READ_NATIVE_MAX:
 	    ide_cmd_lba48_transform(s, lba48);
             ide_set_sector(s, s->nb_sectors - 1);
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s);
             break;
         case WIN_CHECKPOWERMODE1:
         case WIN_CHECKPOWERMODE2:
             s->nsector = 0xff; /* device active or idle */
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s);
             break;
         case WIN_SETFEATURES:

@@ -2230,7 +2230,7 @@
         case WIN_FLUSH_CACHE_EXT:
             if (s->bs)
                 bdrv_flush(s->bs);
-	    s->status = READY_STAT;
+	    s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s);
             break;
         case WIN_STANDBY:

@@ -2259,7 +2259,7 @@
             break;
         case WIN_DIAGNOSE:
             ide_set_signature(s);
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             s->error = 0x01;
             ide_set_irq(s);
             break;

@@ -2276,7 +2276,7 @@
             /* overlapping commands not supported */
             if (s->feature & 0x02)
                 goto abort_cmd;
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             s->atapi_dma = s->feature & 1;
             s->nsector = 1;
             ide_transfer_start(s, s->io_buffer, ATAPI_PACKET_SIZE,

@@ -2287,7 +2287,7 @@
             if (!s->is_cf)
                 goto abort_cmd;
             s->error = 0x09;    /* miscellaneous error */
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s);
             break;
         case CFA_ERASE_SECTORS:

@@ -2299,14 +2299,14 @@
             if (val == CFA_ERASE_SECTORS)
                 s->media_changed = 1;
             s->error = 0x00;
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s);
             break;
         case CFA_TRANSLATE_SECTOR:
             if (!s->is_cf)
                 goto abort_cmd;
             s->error = 0x00;
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             memset(s->io_buffer, 0, 0x200);
             s->io_buffer[0x00] = s->hcyl;			/* Cyl MSB */
             s->io_buffer[0x01] = s->lcyl;			/* Cyl LSB */

@@ -2352,7 +2352,7 @@
             default:
                 goto abort_cmd;
             }
-            s->status = READY_STAT;
+            s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s);
             break;
         default:

@@ -2566,7 +2566,7 @@
         s->mult_sectors = MAX_MULT_SECTORS;
     s->cur_drive = s;
     s->select = 0xa0;
-    s->status = READY_STAT;
+    s->status = READY_STAT | SEEK_STAT;
     ide_set_signature(s);
     /* init the transfer handler so that 0xffff is returned on data
        accesses */