i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs
PATCH RESEND 1/1 i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs
Resend with proper whitespace.
This patch adds the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.
Signed-off-by Seth Heasley <[email protected]>
drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +3 -0
@@ -43,6 +43,7 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes + PCH 0x3b30 32 hard yes yes yes Features supported by this driver: Software PEC no
@@ -592,6 +593,7 @@ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) }, { 0, } };
@@ -615,6 +617,7 @@case PCI_DEVICE_ID_INTEL_TOLAPAI_1 :case PCI_DEVICE_ID_INTEL_ICH10_4 :case PCI_DEVICE_ID_INTEL_ICH10_5 : +case PCI_DEVICE_ID_INTEL_PCH_2 : i801_features |=FEATURE_I2C_BLOCK_READ ;/* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3 :
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig.orig +1 -0
@@ -182,6 +182,7 @@ ICH9 Tolapai ICH10 + PCH This driver can also be built as a module. If so, the module will be called i2c-i801.
Quoted 36 lines · Seth Heasley
Resend with proper whitespace.
This patch adds the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.
Signed-off-by Seth Heasley <[email protected]>drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +3
-0@@ -43,6 +43,7 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes + PCH 0x3b30 32 hard yes yes yes Features supported by this driver: Software PEC no@@ -592,6 +593,7 @@ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) }, { 0, } };@@ -615,6 +617,7 @@case PCI_DEVICE_ID_INTEL_TOLAPAI_1 :case PCI_DEVICE_ID_INTEL_ICH10_4 :case PCI_DEVICE_ID_INTEL_ICH10_5 : +case PCI_DEVICE_ID_INTEL_PCH_2 : i801_features |=FEATURE_I2C_BLOCK_READ ;/* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3 :
drivers/i2c/busses/Kconfig line 188
Quoted 7 lines
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig.orig +1
-0@@ -182,6 +182,7 @@ ICH9 Tolapai ICH10 + PCH This driver can also be built as a module. If so, the module will be called i2c-i801.
Looks good, I've added this to my tree. I will have to wait for the PCI IDs patch to go upstream before I can push it though.
Signature · 1 line
Jean Delvare