ARM EABI toolchain - anyone build it successfully?
I'm trying to make ARM EABI toolchain using the latest snapshot of Buildroot.
However, no matter which options I use (thread library implementation, uClibc version etc.) I'm only able to build GCC (4.3.1).
Then, it breaks later on on building uClibc.
I also tried building uClibc from nptl branch, but it also failed.
As different thread library implementations and uClibc versions give different errors, I won't paste it here, unless requested.
So my question - did anyone manage to build ARM EABI toolchain with buildroot (GCC 4.3.1 + uClibc; I also need busybox)?
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 2 lines · Tomasz Chmielewski
So my question - did anyone manage to build ARM EABI toolchain with buildroot (GCC 4.3.1 + uClibc; I also need busybox)?
Built fine for me last time i tried.
Quoted 6 lines · Bernhard Reutner-Fischer
Quoted 2 lines · Tomasz Chmielewski
So my question - did anyone manage to build ARM EABI toolchain with buildroot (GCC 4.3.1 + uClibc; I also need busybox)?
Built fine for me last time i tried.
Do you still have it anywhere?
If yes, could you paste your .config for Buildroot?
If possible, also .config for uClibc?
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 9 lines · Tomasz Chmielewski
Quoted 6 lines · Bernhard Reutner-Fischer
Quoted 2 lines · Tomasz Chmielewski
So my question - did anyone manage to build ARM EABI toolchain with buildroot (GCC 4.3.1 + uClibc; I also need busybox)?
Built fine for me last time i tried.
Do you still have it anywhere?
Unfortunately i've lost the disk that contained the configs, but going off a minimal config should work fine.
Quoted 11 lines · Bernhard Reutner-Fischer
Quoted 7 lines · Tomasz Chmielewski
Quoted 5 lines · Bernhard Reutner-Fischer
Quoted 2 lines · Tomasz Chmielewski
So my question - did anyone manage to build ARM EABI toolchain with buildroot (GCC 4.3.1 + uClibc; I also need busybox)?
Built fine for me last time i tried.
Do you still have it anywhere?
Unfortunately i've lost the disk that contained the configs, but going off a minimal config should work fine.
OK, it builds (I had a custom uClibc config, which perhaps made some problems), but even then, lots of Busybox things don't work.
I.e.:
# ./busybox
(...)
Currently defined functions:
ash, cat, mount, sh, sleep, switch_root, umount, whoami# ./busybox ash Illegal instruction
Similar to: http://bugs.busybox.net/view.php?id=3364 which maybe points to http://bugs.busybox.net/view.php?id=0003804 (some things are build as EABI, and some things are build as OABI, although EABI is chosen).
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 5 lines · Tomasz Chmielewski
OK, it builds (I had a custom uClibc config, which perhaps made some problems), but even then, lots of Busybox things don't work.
I.e.:
Quoted 7 lines
# ./busybox (...) Currently defined functions: ash, cat, mount, sh, sleep, switch_root, umount, whoami# ./busybox ash Illegal instruction
what CPU did you select? ISTR that i have fixed this for iWMMXT && EABI
Quoted 12 lines · Bernhard Reutner-Fischer
Quoted 10 lines · Tomasz Chmielewski
OK, it builds (I had a custom uClibc config, which perhaps made some problems), but even then, lots of Busybox things don't work.
I.e.:
# ./busybox (...) Currently defined functions: ash, cat, mount, sh, sleep, switch_root, umount, whoami
Quoted 4 lines
Quoted 2 lines
# ./busybox ash Illegal instructionwhat CPU did you select? ISTR that i have fixed this for iWMMXT && EABI
xscale.
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 12 lines · Bernhard Reutner-Fischer
Quoted 10 lines · Tomasz Chmielewski
OK, it builds (I had a custom uClibc config, which perhaps made some problems), but even then, lots of Busybox things don't work.
I.e.:
# ./busybox (...) Currently defined functions: ash, cat, mount, sh, sleep, switch_root, umount, whoami
Quoted 4 lines
Quoted 2 lines
# ./busybox ash Illegal instructionwhat CPU did you select? ISTR that i have fixed this for iWMMXT && EABI
BTW, could you point which changes you did to fix this issue for iWMMXT && EABI?
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 6 lines · Tomasz Chmielewski
Quoted 1 line · Bernhard Reutner-Fischer
what CPU did you select? ISTR that i have fixed this for iWMMXT && EABI
BTW, could you point which changes you did to fix this issue for iWMMXT && EABI?
aa42116fd34890d8765e126e11e1466e4f91874f
andf3ddcec9cb2e6fa27955f3fef11092bebdd6a04b
xscale is supposed to work just fine here.
Quoted 10 lines · Bernhard Reutner-Fischer
Quoted 5 lines · Tomasz Chmielewski
Quoted 1 line · Bernhard Reutner-Fischer
what CPU did you select? ISTR that i have fixed this for iWMMXT && EABI
BTW, could you point which changes you did to fix this issue for iWMMXT && EABI?
aa42116fd34890d8765e126e11e1466e4f91874f
andf3ddcec9cb2e6fa27955f3fef11092bebdd6a04b
I'm not very familiar with buildroot's versioning - how can I find those changes?
Quoted 1 line
xscale is supposed to work just fine here.
Well, it doesn't :(
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 4 lines · Bernhard Reutner-Fischer
Quoted 3 lines · Tomasz Chmielewski
Quoted 1 line · Bernhard Reutner-Fischer
what CPU did you select? ISTR that i have fixed this for iWMMXT && EABI
Quoted 8 lines
Quoted 2 lines
BTW, could you point which changes you did to fix this issue for iWMMXT && EABI?
aa42116fd34890d8765e126e11e1466e4f91874f
andf3ddcec9cb2e6fa27955f3fef11092bebdd6a04bxscale is supposed to work just fine here.
Out of all shels, only hush and lush work:
# ./busybox
(...)
Currently defined functions:
ash, cat, hush, lash, mount, msh, sh, sleep, switch_root,
umount, whoami# ./busybox ash Illegal instruction # ./busybox hush /tmp # exit # ./busybox lash /tmp # exit # ./busybox msh # Illegal instruction # ./busybox sh Illegal instruction
Hopefully hush is enough ;)
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Tomasz Chmielewski schrieb:
(...)
Quoted 21 lines
Out of all shels, only hush and lush work:
# ./busybox (...) Currently defined functions: ash, cat, hush, lash, mount, msh, sh, sleep, switch_root, umount, whoami# ./busybox ash Illegal instruction # ./busybox hush /tmp # exit # ./busybox lash /tmp # exit # ./busybox msh # Illegal instruction # ./busybox sh Illegal instruction
Quoted 1 line
Hopefully hush is enough ;)
Unfortunately, it breaks, too:
# ./busybox hush /tmp # BLAH=1 /tmp # if [ $BLAH == 1 ] ; then
Quoted 2 lines
./busybox whoami
fi
Illegal instruction
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 7 lines · Tomasz Chmielewski
Quoted 6 lines · Bernhard Reutner-Fischer
Quoted 5 lines · Tomasz Chmielewski
Quoted 4 lines · Bernhard Reutner-Fischer
Quoted 2 lines · Tomasz Chmielewski
So my question - did anyone manage to build ARM EABI toolchain with buildroot (GCC 4.3.1 + uClibc; I also need busybox)?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Quoted 1 line
Built fine for me last time i tried.
Do you still have it anywhere?
Unfortunately i've lost the disk that contained the configs, but going off a minimal config should work fine.
OK, it builds (I had a custom uClibc config, which perhaps made some problems), but even then, lots of Busybox things don't work.
BTW, I know why it initially failed for me - I removed networking support in uClibc configuration, which resulted in:
CC libpthread/linuxthreads.old/pthread.oS
STRIP -x -R .note -R .comment libpthread/linuxthreads.old/libpthread_so.a
AR cr libpthread/linuxthreads.old/libpthread_so.a
LD libpthread-0.9.29.so
libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function `sendto':
wrapsyscall.c:(.text+0x44): undefined reference to __libc_sendto' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function sendmsg':
wrapsyscall.c:(.text+0x90): undefined reference to __libc_sendmsg' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function send':
wrapsyscall.c:(.text+0xe4): undefined reference to __libc_send' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function recvmsg':
wrapsyscall.c:(.text+0x130): undefined reference to __libc_recvmsg' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function recvfrom':
wrapsyscall.c:(.text+0x194): undefined reference to __libc_recvfrom' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function recv':
wrapsyscall.c:(.text+0x1e8): undefined reference to __libc_recv' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function connect':
wrapsyscall.c:(.text+0x234): undefined reference to __libc_connect' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function accept':
wrapsyscall.c:(.text+0x280): undefined reference to `__libc_accept'
collect2: ld returned 1 exit status
make[1]: *** [lib/libpthread.so] Error 1
make[1]: Leaving directory `/home/build/buildroot/buildroot-arm-gcc-4.3.1-EABI/toolchain_build_arm/uClibc'
make: *** [/home/build/buildroot/buildroot-arm-gcc-4.3.1-EABI/toolchain_build_arm/uClibc/lib/libc.a] Error 2
Signature · 2 lines
Tomasz Chmielewski http://wpkg.org
Quoted 1 line · Tomasz Chmielewski
BTW, I know why it initially failed for me - I removed networking support in uClibc configuration, which resulted in:
well yes, that's somewhat expected :) I usually do not do threads. If you need threads, you should at least turn on socket support for obvious reasons.
Quoted 26 lines
CC libpthread/linuxthreads.old/pthread.oS
STRIP -x -R .note -R .comment libpthread/linuxthreads.old/libpthread_so.a
AR cr libpthread/linuxthreads.old/libpthread_so.a
LD libpthread-0.9.29.so
libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In function `sendto':
wrapsyscall.c:(.text+0x44): undefined reference to__libc_sendto' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In functionsendmsg':
wrapsyscall.c:(.text+0x90): undefined reference to__libc_sendmsg' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In functionsend':
wrapsyscall.c:(.text+0xe4): undefined reference to__libc_send' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In functionrecvmsg':
wrapsyscall.c:(.text+0x130): undefined reference to__libc_recvmsg' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In functionrecvfrom':
wrapsyscall.c:(.text+0x194): undefined reference to__libc_recvfrom' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In functionrecv':
wrapsyscall.c:(.text+0x1e8): undefined reference to__libc_recv' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In functionconnect':
wrapsyscall.c:(.text+0x234): undefined reference to__libc_connect' libpthread/linuxthreads.old/libpthread_so.a(wrapsyscall.os): In functionaccept':
wrapsyscall.c:(.text+0x280): undefined reference to `__libc_accept'
collect2: ld returned 1 exit status
make[1]: *** [lib/libpthread.so] Error 1
make[1]: Leaving directory `/home/build/buildroot/buildroot-arm-gcc-4.3.1-EABI/toolchain_build_arm/uClibc'
make: *** [/home/build/buildroot/buildroot-arm-gcc-4.3.1-EABI/toolchain_build_arm/uClibc/lib/libc.a] Error 2