Skip to contentSkip to conversation

embedded rootfs utility

DISCUSSION Behan Webster 10 participants 25 messages Jul 30, 2008 – Sep 20, 2008

lore
Share & tools
lore
#0 lore raw

A quick announcement of the release of elbs, or the "Embedded Linux Build System" (it seemed like a good name at the time I started writing it...) So far it's just a few utilities that I wrote to make a few of my own projects easier.

However, most notably it contains a utility called "elbs-rootfs" which makes it easy to create an embedded rootfs for any architecture supported by the Debian projecy (or Ubuntu Linux). The idea is to get a rootfs up and working quickly via nfs (or a flash drive) which allows you to install any debian package and/or to do native development. This is (not yet) meant as a tool to make your final rootfs fit on a small flash partition.

For those of you who are interested, it does the following: builds a first stage debootstrap directory using a dist/mirror of your choice, and then tweaks it so you can boot it natively to be able to run the second stage debootstrap scripts. Yes, you can do all these things manually, however, this does it all for you in a few minutes (with reasonable defaults for available options). The only annoying bit is it must be run as root, as it needs to be able to set file permissions/ownerships and such.

For example (as root):

    # elbs rootfs --arch mips --baud 19200 --dist etch /nfs/myrootfs
    I: Building rootfs in /nfs/myrootfs
    I: Installing etch/mips from http://http.us.debian.org/debian
    <snip>
    I: debootstrap succeeded
    I: MAKEDEV in /nfs/myrootfs/dev
    <snip>
    I: create /nfs/myrootfs/etc/group
    Boot your target with /nfs/myrootfs as your rootfs, then run the
finish script on the target

The directory /nfs/myrootfs will now contain a stage-one (unconfigured) debootstrap installation of arch mips from debian/etch, modified to allow you to connect to a serial console ttyS0 at 19200 baud (as specified on the command line above).

You then need to boot your target using this rootfs and run the finish.sh script which will complete the installation.

    # sh /finish.sh

You should now have a fully configured rootfs for your target which is capable of native compiling (amongst other things).

You can find elbs at http://debian.websterwood.com/elbs/
The help text can be found here
http://debian.websterwood.com/elbs/elbs-rootfs.html

Alternatively, for you Debian/Ubuntu users, add these to your sources.list and # apt-get install elbs
deb http://debian.websterwood.com/ sid main
or
deb http://debian.websterwood.com/ hardy main

For those of you at OLS2008 who attended the MIPS or CELF BoFs, this is the utility I promised I would release.

I hope some of you find this helpful.

Yes, I know this is, in principal, very similar to what emdebian's emsandbox does. In my defense, I wasn't aware of emsandbox when I wrote this, and whereas emsandbox uses special emdebian packages, elbs-rootfs uses vanilla debian packages which is what I chose to use on the project that kicked this all off.

I'll be adding more to this as I get to it. Bug reports, feature requests, and patches welcomed.

Signature · 2 lines
Behan Webster
[email protected]
#1 lore raw
Quoted 5 lines · Behan Webster

A quick announcement of the release of elbs, or the "Embedded Linux Build System" (it seemed like a good name at the time I started writing it...) So far it's just a few utilities that I wrote to make a few of my own projects easier.

Quoted 7 lines

However, most notably it contains a utility called "elbs-rootfs" which makes it easy to create an embedded rootfs for any architecture supported by the Debian projecy (or Ubuntu Linux). The idea is to get a rootfs up and working quickly via nfs (or a flash drive) which allows you to install any debian package and/or to do native development. This is (not yet) meant as a tool to make your final rootfs fit on a small flash partition.

Hey Behan, thanks for posting this. For anybody looking at this tool, I can attest to it's usefulness. For my work it has simplified getting a full development environment setup for embedded targets.

What mailing list should be used for any discussion/patches on this tool?

Cheers,
g.

#2 lore raw
Quoted 5 lines · Behan Webster

A quick announcement of the release of elbs, or the "Embedded Linux Build System" (it seemed like a good name at the time I started writing it...) So far it's just a few utilities that I wrote to make a few of my own projects easier.

Quoted 8 lines

However, most notably it contains a utility called "elbs-rootfs" which makes it easy to create an embedded rootfs for any architecture supported by the Debian projecy (or Ubuntu Linux). The idea is to get a rootfs up and working quickly via nfs (or a flash drive) which allows you to install any debian package and/or to do native development. This is (not yet) meant as a tool to make your final rootfs fit on a small flash partition.

Very interesting, where can I found it? Can you give me a site to download it?

Signature · 7 lines
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it

[email protected]
+39 06 72582838
#3 lore raw
Quoted 16 lines · Marco Stornelli
Quoted 5 lines · Behan Webster

A quick announcement of the release of elbs, or the "Embedded Linux Build System" (it seemed like a good name at the time I started writing it...) So far it's just a few utilities that I wrote to make a few of my own projects easier.

Quoted 8 lines

However, most notably it contains a utility called "elbs-rootfs" which makes it easy to create an embedded rootfs for any architecture supported by the Debian projecy (or Ubuntu Linux). The idea is to get a rootfs up and working quickly via nfs (or a flash drive) which allows you to install any debian package and/or to do native development. This is (not yet) meant as a tool to make your final rootfs fit on a small flash partition.

Quoted 3 lines

Very interesting, where can I found it? Can you give me a site to download it?

It's listed near the bottom of the announcement.

Quoted 1 line

You can find elbs at http://debian.websterwood.com/elbs/

Enjoy.

Behan

Signature · 2 lines
Behan Webster
[email protected]
#4 lore raw
In reply to Behan Webster

Hi Behan,

Quoted 35 lines · Behan Webster

However, most notably it contains a utility called "elbs-rootfs" which makes it easy to create an embedded rootfs for any architecture supported by the Debian projecy (or Ubuntu Linux). The idea is to get a rootfs up and working quickly via nfs (or a flash drive) which allows you to install any debian package and/or to do native development. This is (not yet) meant as a tool to make your final rootfs fit on a small flash partition.

For those of you who are interested, it does the following: builds a first stage debootstrap directory using a dist/mirror of your choice, and then tweaks it so you can boot it natively to be able to run the second stage debootstrap scripts. Yes, you can do all these things manually, however, this does it all for you in a few minutes (with reasonable defaults for available options). The only annoying bit is it must be run as root, as it needs to be able to set file permissions/ownerships and such.

For example (as root):

    # elbs rootfs --arch mips --baud 19200 --dist etch /nfs/myrootfs
    I: Building rootfs in /nfs/myrootfs
    I: Installing etch/mips from http://http.us.debian.org/debian
    <snip>
    I: debootstrap succeeded
    I: MAKEDEV in /nfs/myrootfs/dev
    <snip>
    I: create /nfs/myrootfs/etc/group
    Boot your target with /nfs/myrootfs as your rootfs, then run the
finish script on the target

The directory /nfs/myrootfs will now contain a stage-one (unconfigured) debootstrap installation of arch mips from debian/etch, modified to allow you to connect to a serial console ttyS0 at 19200 baud (as specified on the command line above).

Quoted 7 lines

You then need to boot your target using this rootfs and run the finish.sh script which will complete the installation.

    # sh /finish.sh

You should now have a fully configured rootfs for your target which is capable of native compiling (amongst other things).

Thanks for this useful tool!

I'm used to plain debootstrap, but decided to give your elbs-rootfs a try for creating up a mipsel and a powerpc NFS root file system. It worked fine, except for one minor nit. As an NFS root file system is mounted read-only by default, I had to manually do

| mount -n proc /proc -t proc
| mount -n -o remount -w /

before running finish.sh. Perhaps this can be added to the top of finish.sh?

Add the end of its execution, finish.sh says:

| Feel free to delete /debootstrap and the downloaded packages
|   # rm -rf /debootstrap
|   # apt-get clean
| Please reboot now
|   # shutdown -r now

Shouldn't it suggest to delete /finish.sh, too?

Anyway, thanks for this tool!

With kind regards,

Geert Uytterhoeven
Software Architect

Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium

Phone:    +32 (0)2 700 8453
Fax:      +32 (0)2 700 8622
E-mail:   [email protected]
Internet: http://www.sony-europe.com/

A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis 293-0376800-10 GEBA-BE-BB

#5 lore raw
Quoted 11 lines · Geert Uytterhoeven

Thanks for this useful tool!
I'm used to plain debootstrap, but decided to give your elbs-rootfs a try for creating up a mipsel and a powerpc NFS root file system. It worked fine, except for one minor nit. As an NFS root file system is mounted read-only by default, I had to manually do

| mount -n proc /proc -t proc
| mount -n -o remount -w /

before running finish.sh. Perhaps this can be added to the top of finish.sh?

Odd. I never had this issue. It has always just worked for me.

None the less, I will add checks for this to the script.

Quoted 10 lines

Add the end of its execution, finish.sh says:

| Feel free to delete /debootstrap and the downloaded packages
|   # rm -rf /debootstrap
|   # apt-get clean
| Please reboot now
|   # shutdown -r now

Shouldn't it suggest to delete /finish.sh, too?

Ah. finish.sh used to delete itself when finished. I removed that while testing, and forgot to put it back in.

Indeed you are correct.

Quoted 2 lines

Anyway, thanks for this tool!

I'm glad you are finding it useful.

Signature · 2 lines
Behan Webster
[email protected]
#6 lore raw

Hey Behan, a few more comments...

Quoted 7 lines · Behan Webster
Quoted 6 lines · Geert Uytterhoeven

Thanks for this useful tool!
I'm used to plain debootstrap, but decided to give your elbs-rootfs a try for creating up a mipsel and a powerpc NFS root file system. It worked fine, except for one minor nit. As an NFS root file system is mounted read-only by default, I had to manually do

Quoted 6 lines
Quoted 5 lines

| mount -n proc /proc -t proc
| mount -n -o remount -w /

before running finish.sh. Perhaps this can be added to the top of finish.sh?

Odd. I never had this issue. It has always just worked for me.

I had to do this also, and I had to explicitly "export PATH" to get the finish script to work. Otherwise I dpkg complains.

What I probably did differently is that I booted the system with "init=/bin/bash" on the command line instead of letting it just run init. I needed to do this because if I let it run init, I got complaints about PAM failures when trying to log in as root. How are you booting the system on first run?

Also, when booting on something like a 5200 with an uncommon serial ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device file before it would boot.

Cheers,
g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
#7 lore raw
Quoted 15 lines · Grant Likely

Hey Behan, a few more comments...

Quoted 11 lines · Behan Webster
Quoted 9 lines · Geert Uytterhoeven

Thanks for this useful tool!
I'm used to plain debootstrap, but decided to give your elbs-rootfs a try for creating up a mipsel and a powerpc NFS root file system. It worked fine, except for one minor nit. As an NFS root file system is mounted read-only by default, I had to manually do

| mount -n proc /proc -t proc
| mount -n -o remount -w /

Quoted 9 lines
Quoted 5 lines
Quoted 3 lines

before running finish.sh. Perhaps this can be added to the top of finish.sh?

Odd. I never had this issue. It has always just worked for me.

I had to do this also, and I had to explicitly "export PATH" to get the finish script to work. Otherwise I dpkg complains

I've also never had this issue, but I will add it to the script.

Quoted 6 lines

What I probably did differently is that I booted the system with "init=/bin/bash" on the command line instead of letting it just run init. I needed to do this because if I let it run init, I got complaints about PAM failures when trying to log in as root. How are you booting the system on first run?

There's your problem. You may have had pam failures before you used elbs-rootfs, but you shouldn't when using it. My script twiddles with inittab to give you a getty with a bash shell without a password, and then fixes it in the finish.sh script. If you just boot with it normally it should just work. I'm too lazy to type init=/bin/bash, so the script does it for you. :)

Quoted 4 lines

Also, when booting on something like a 5200 with an uncommon serial ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device file before it would boot.

You're using an older version then. The latest (v1.2) allows you to specify the serial port/baud rate when running the tool.

Behan

Signature · 2 lines
Behan Webster
[email protected]
#8 lore raw
Quoted 7 lines · Behan Webster
Quoted 4 lines · Grant Likely

Also, when booting on something like a 5200 with an uncommon serial ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device file before it would boot.

You're using an older version then. The latest (v1.2) allows you to specify the serial port/baud rate when running the tool.

Hmm, I can only find v1.1.2 on your website.

g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
#9 lore raw
Quoted 9 lines · Grant Likely
Quoted 7 lines · Behan Webster
Quoted 5 lines · Grant Likely

Also, when booting on something like a 5200 with an uncommon serial ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device file before it would boot.

Quoted 6 lines
Quoted 3 lines

You're using an older version then. The latest (v1.2) allows you to specify the serial port/baud rate when running the tool.

Hmm, I can only find v1.1.2 on your website.

Version 1.1.2 of elbs contains v1.2 of the rootfs tool. I suppose I should Sync the version numbers on a release.

Signature · 2 lines
Behan Webster
[email protected]
#10 lore raw
Quoted 10 lines · Behan Webster
Quoted 9 lines · Grant Likely
Quoted 7 lines · Behan Webster
Quoted 5 lines · Grant Likely

Also, when booting on something like a 5200 with an uncommon serial ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device file before it would boot.

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

You're using an older version then. The latest (v1.2) allows you to specify the serial port/baud rate when running the tool.

Hmm, I can only find v1.1.2 on your website.

Version 1.1.2 of elbs contains v1.2 of the rootfs tool. I suppose I should Sync the version numbers on a release.

Okay, then I've still got a problem. I did specify the serial port when running it, and the files in /etc were all set correctly. It was just the /dev/ttyPSC0 device file which was missing.

g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
#11 lore raw
Quoted 23 lines · Grant Likely
Quoted 21 lines · Behan Webster
Quoted 19 lines · Grant Likely
Quoted 13 lines · Behan Webster
Quoted 6 lines · Grant Likely

Also, when booting on something like a 5200 with an uncommon serial ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device file before it would boot.

You're using an older version then. The latest (v1.2) allows you to specify the serial port/baud rate when running the tool.

Hmm, I can only find v1.1.2 on your website.

Quoted 7 lines
Quoted 3 lines

Version 1.1.2 of elbs contains v1.2 of the rootfs tool. I suppose I should Sync the version numbers on a release.

Okay, then I've still got a problem. I did specify the serial port when running it, and the files in /etc were all set correctly. It was just the /dev/ttyPSC0 device file which was missing

I see. I thought MAKEDEV would have done that for you. It appears that MAKEDEV doesn't support ttyPSC0.

Yes, I suppose then you would have to make that dev file manually...

Best laid plans...

Signature · 2 lines
Behan Webster
[email protected]
#12 lore raw
In reply to Behan Webster
Quoted 12 lines · Behan Webster
Quoted 11 lines · Grant Likely
Quoted 10 lines · Behan Webster
Quoted 9 lines · Geert Uytterhoeven

Thanks for this useful tool!
I'm used to plain debootstrap, but decided to give your elbs-rootfs a try for creating up a mipsel and a powerpc NFS root file system. It worked fine, except for one minor nit. As an NFS root file system is mounted read-only by default, I had to manually do

| mount -n proc /proc -t proc
| mount -n -o remount -w /

Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
Quoted 2 lines

before running finish.sh. Perhaps this can be added to the top of finish.sh?

Odd. I never had this issue. It has always just worked for me.

I had to do this also, and I had to explicitly "export PATH" to get the finish script to work. Otherwise I dpkg complains

I've also never had this issue, but I will add it to the script.

Me neither.

Quoted 6 lines
Quoted 6 lines

What I probably did differently is that I booted the system with "init=/bin/bash" on the command line instead of letting it just run init. I needed to do this because if I let it run init, I got complaints about PAM failures when trying to log in as root. How are you booting the system on first run?

Quoted 6 lines

There's your problem. You may have had pam failures before you used elbs-rootfs, but you shouldn't when using it. My script twiddles with inittab to give you a getty with a bash shell without a password, and then fixes it in the finish.sh script. If you just boot with it normally it should just work. I'm too lazy to type init=/bin/bash, so the script does it for you. :)

I had authentication problems afterwards. As my board didn't have an RTC, the system insisted on changing my root password after each reboot and login.

Quoted 6 lines
Quoted 4 lines

Also, when booting on something like a 5200 with an uncommon serial ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device file before it would boot.

You're using an older version then. The latest (v1.2) allows you to specify the serial port/baud rate when running the tool.

Yep, it's a pity we cannot standardize on /dev/ttyS0 for the first serial port...

With kind regards,

Geert Uytterhoeven
Software Architect

Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium

Phone:    +32 (0)2 700 8453
Fax:      +32 (0)2 700 8622
E-mail:   [email protected]
Internet: http://www.sony-europe.com/

A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis 293-0376800-10 GEBA-BE-BB

#13 lore raw
Quoted 7 lines · Geert Uytterhoeven
Quoted 6 lines · Behan Webster
Quoted 5 lines · Grant Likely

On Fri, Aug 8, 2008 at 11:03 AM, Behan Webster <[email protected]> wrote:
Also, when booting on something like a 5200 with an uncommon serial ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device file before it would boot.

Quoted 5 lines
Quoted 2 lines

You're using an older version then. The latest (v1.2) allows you to specify the serial port/baud rate when running the tool.

Yep, it's a pity we cannot standardize on /dev/ttyS0 for the first serial port...

Indeed; but it could be potentially solved with a few udev rules. I should look into that...

g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
#14 lore raw

Module init for compiled in vs loaded modules

Hi,

For kernel modules can be loaded by explicitly do insmod etc for ones that are not compiled into the kernel.

1) But where do i look to find how the kernel loads(ie. calls the fn exported by module_init(XXXX)) for modules compiled into the kernel.

2) Does the kernel call some kind of probe to load them ? say i have 2 module compiled into the kernel for 2 diff type of ether cards. Would the kernel call init on both.

thanks !

#15 lore raw

Re: Module init for compiled in vs loaded modules

Code base of 2.6.18

Quoted 2 lines

1) But where do i look to find how the kernel loads(ie. calls the fn exported by module_init(XXXX)) for modules compiled into the kernel.

linux/init.h:

#ifndef MODULE
...
#define module_init(x) __initcall(x);
#define __initcall(fn) device_initcall(fn)
#define device_initcall(fn) __define_initcall("6",fn)

#define __define_initcall(level,fn) \
    static initcall_t __initcall_##fn __attribute_used__ \
    __attribute__((__section__(".initcall" level ".init"))) = fn

...
#endif

So as you can see call to module_init is actually an initcall.

initcalls are processed in do_initcalls function in init/main.c

static void __init do_basic_setup(void)

{
    ....
    do_initcalls();
}
Quoted 2 lines

thanks !

Amol

Quoted 10 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#16 lore raw

Re: Module init for compiled in vs loaded modules

In reply to Fundu

Please, do not start a new thread by replying to a message in an existing thread. Compose a new message from scratch to the mailing list.

Otherwise your thread shows up in the middle of another, *unrelated* thread when anybody looks at a threaded view of the archives. Just look at
<http://thread.gmane.org/gmane.linux.kernel.embedded/626/focus=815> to see what I mean.

Thanks, Tom

Signature · 4 lines
  /"\  ASCII Ribbon Campaign   |
  \ /                          |   Email to user 'CTZ001'
   X        Against HTML       |             at 'email.mot.com'
  / \     in e-mail & news     |
#17 lore raw
In reply to Behan Webster

Hello Behan,

Since I am running Debian GNU/Linux on my ARMs...

I like to know, whether I can use it for the Atmel AT91SAM7SE, Atmel AT91SAM9G20, Freescale i.MX31 and NXP LH7A404 too?

I have a WHOLE Debian mirror available and currently building my EmDebian mirror too.

Thanks, Greetings and nice Day/Evening
Michelle Konzack
Systemadministrator
24V Electronic Engineer
Tamay Dogan Network
Debian GNU/Linux Consultant

Signature · 5 lines
Linux-User #280138 with the Linux Counter, http://counter.li.org/
##################### Debian GNU/Linux Consultant #####################
Michelle Konzack   Apt. 917                  ICQ #328449886
+49/177/9351947    50, rue de Soultz         MSN LinuxMichi
+33/6/61925193     67100 Strasbourg/France   IRC #Debian (irc.icq.com)
#18 lore raw
Quoted 7 lines · Michelle Konzack

Hello Behan,

Since I am running Debian GNU/Linux on my ARMs...

I like to know, whether I can use it for the Atmel AT91SAM7SE, Atmel AT91SAM9G20, Freescale i.MX31 and NXP LH7A404 too?

If debian runs on those platforms, my utility should work for it.

Signature · 2 lines
Behan Webster
[email protected]
#19 lore raw

ELBS mindshare

Hey Behan,

BTW, I was talking with a guy from TI last night (Mike Turquette; works on the OMAP) and I asked him my standard question about what he thinks about the state of building root filesystems for embedded systems.

When he listed the toolkits he knows about and is interested in, ELBS was either the 2nd or 3rd tool that he mentioned.

Word is getting around dude.

g.

#20 lore raw

Re: ELBS mindshare

Quoted 8 lines · Grant Likely

BTW, I was talking with a guy from TI last night (Mike Turquette; works on the OMAP) and I asked him my standard question about what he thinks about the state of building root filesystems for embedded systems.

When he listed the toolkits he knows about and is interested in, ELBS was either the 2nd or 3rd tool that he mentioned.

Word is getting around dude.

What is ELBS? If it is somehow better than ptxdist, I'll have to apply a few patches there 8-)

rsc

Signature · 5 lines
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9
#21 lore raw

Re: ELBS mindshare

Quoted 5 lines · Grant Likely
Quoted 4 lines

BTW, I was talking with a guy from TI last night (Mike Turquette; works on the OMAP) and I asked him my standard question about what he thinks about the state of building root filesystems for embedded systems.

Quoted 7 lines
Quoted 4 lines

When he listed the toolkits he knows about and is interested in, ELBS was either the 2nd or 3rd tool that he mentioned.

Word is getting around dude.

What is ELBS? If it is somehow better than ptxdist, I'll have to apply a few patches there 8-)

Embedded Linux Build System
http://debian.websterwood.com/elbs/

Article on LinuxDevices:
http://www.linuxdevices.com/news/NS5894411715.html

Quoted 15 lines

rsc
--
Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Hannoversche Str. 2, 31134 Hildesheim, Germany
Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9

--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#22 lore raw

Re: ELBS mindshare

Quoted 10 lines · Bill Traynor
Quoted 10 lines · Grant Likely
Quoted 8 lines

BTW, I was talking with a guy from TI last night (Mike Turquette; works on the OMAP) and I asked him my standard question about what he thinks about the state of building root filesystems for embedded systems.

When he listed the toolkits he knows about and is interested in, ELBS was either the 2nd or 3rd tool that he mentioned.

Word is getting around dude.

Quoted 8 lines
Quoted 2 lines

What is ELBS? If it is somehow better than ptxdist, I'll have to apply a few patches there 8-)

Embedded Linux Build System
http://debian.websterwood.com/elbs/

Article on LinuxDevices:
http://www.linuxdevices.com/news/NS5894411715.html

Ok, you do native building, that's not what we do for ptxdist's standard root filesystems.

But note that ptxdist itself is only a system to manage configurable rules which are being executed in a dependency-defined order; so in the end, it can built whatever it likes.

rsc

Signature · 5 lines
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9
#23 lore raw

Re: ELBS mindshare

In reply to Robert Schwebel
Quoted 5 lines · Robert Schwebel
Quoted 4 lines · Grant Likely

BTW, I was talking with a guy from TI last night (Mike Turquette; works on the OMAP) and I asked him my standard question about what he thinks about the state of building root filesystems for embedded systems.

Quoted 7 lines
Quoted 4 lines

When he listed the toolkits he knows about and is interested in, ELBS was either the 2nd or 3rd tool that he mentioned.

Word is getting around dude.

What is ELBS? If it is somehow better than ptxdist, I'll have to apply a few patches there 8-)

Oops, I forgot to remove the linux-embedded from the to: list. I had intended to this to be a private email to Behan; Oh well, now even more people have probably heard about it. :-)

ELBS is a set of tools for bootstrapping an embedded root filesystem using existing Debian or Ubuntu packages.

g.

#24 lore raw

Re: ELBS mindshare

Hi Grand,

Fortunateley you have forgoten to remove my E-Mail...
...otherwise I had to kill you! ;-)

Am 2008-09-17 15:09:53, schrieb Grant Likely:

Quoted 6 lines

Oops, I forgot to remove the linux-embedded from the to: list. I had intended to this to be a private email to Behan; Oh well, now even more people have probably heard about it. :-)

ELBS is a set of tools for bootstrapping an embedded root filesystem using existing Debian or Ubuntu packages.

Thanks for the Info.

Since my Evaluation Kit for AT91SAM9G20 has 64 MByte SDRAM and 256 MByte NAND Flash I like to try it out...

Thanks, Greetings and nice Day/Evening
Michelle Konzack
Systemadministrator
24V Electronic Engineer
Tamay Dogan Network
Debian GNU/Linux Consultant

Signature · 5 lines
Linux-User #280138 with the Linux Counter, http://counter.li.org/
##################### Debian GNU/Linux Consultant #####################
Michelle Konzack   Apt. 917                  ICQ #328449886
+49/177/9351947    50, rue de Soultz         MSN LinuxMichi
+33/6/61925193     67100 Strasbourg/France   IRC #Debian (irc.icq.com)