Add note on dereferencing /aliases pointers

Replace the "must quote special characters" note with a hint on how to dereference /aliases pointers by omitting the leading "/". This feature was introduced by Kumar Gala as a libfdt enhancement in commit ed035708235332c3c117ee3bb1a426063f03cfcb.

Example:

=> fdt print /aliases

aliases {
        ethernet0 = "/qe at e0100000/ucc at 2000";
        ethernet1 = "/qe at e0100000/ucc at 3000";
        serial0 = "/soc8360 at e0000000/serial at 4500";
        serial1 = "/soc8360 at e0000000/serial at 4600";
        pci0 = "/pci at e0008500";
};
=> fdt print ethernet0
ucc at 2000 {
        device_type = "network";
        compatible = "ucc_geth";
        cell-index = <0x1>;
        reg = <0x2000 0x200>;
        interrupts = <0x20>;
        interrupt-parent = <0x2>;
        local-mac-address = [00 00 00 00 00 00];
        rx-clock-name = "none";
        tx-clock-name = "clk9";
        phy-handle = <0x3>;
        phy-connection-type = "rgmii-id";
        pio-handle = <0x4>;
};

---

Sorry for the duplicate, I forgot to change my u-boot alias in mutt. :-( I am re-sending this to make sure it gets in the denx.de archives.

gvb

 common/cmd_fdt.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

index d3b19dd..05a328f 100644
@@ -799,6 +799,6 @@ U_BOOT_CMD(
 	"fdt rsvmem add <addr> <size>        - Add a mem reserve\n"
 	"fdt rsvmem delete <index>           - Delete a mem reserves\n"
 	"fdt chosen - Add/update the /chosen branch in the tree\n"
-	"NOTE: If the path or property you are setting/printing has a '#' character\n"
-	"     or spaces, you MUST escape it with a \\ character or quote it with \".\n"
+	"NOTE: Dereference aliases by omiting the leading '/', "
+		"e.g. fdt print ethernet0.\n"
 );

1.5.6.3