Skip to contentSkip to conversation

What is "extra timer interrupt" in powertop output?

DISCUSSION Andrey Borzenkov 1 participant 1 message Aug 24, 2008

lore
Share & tools
lore
#0 lore raw

After disabling CD-ROM polling the next top-100 winner is "extra timer interrupt":

Cn Avg residency P-states (frequencies)
C0 (cpu running) ( 4.2%) 750 Mhz 0.0%

polling           0.0ms ( 0.0%)          500 Mhz   100.0%
C1                0.0ms ( 0.0%)
C2                0.9ms (95.8%)

Wakeups-from-idle per second : 1101.2 interval: 5.0s
Power usage (ACPI estimate): 11.7W (2.2 hours)

Top causes for wakeups:
31.6% ( 8.4) <interrupt> : extra timer interrupt
15.0% ( 4.0) hald-addon-acpi : schedule_timeout (process_timeout)

I assume, this is what is simply called "timer":
{pts/1}:~%> cat /proc/interrupts
CPU0

  0:    9060975    XT-PIC-XT        timer
  1:      18742    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  3:          2    XT-PIC-XT
  4:          2    XT-PIC-XT
  5:          3    XT-PIC-XT
  7:          5    XT-PIC-XT        irda0
  8:         11    XT-PIC-XT        rtc0
  9:       3376    XT-PIC-XT        acpi
 10:          2    XT-PIC-XT
 11:     239251    XT-PIC-XT        ohci_hcd:usb1, yenta, yenta, yenta, ALI 
5451, pcmcia0.0
 12:     621206    XT-PIC-XT        i8042
 14:     225993    XT-PIC-XT        ide0
 15:     315463    XT-PIC-XT        ide1
NMI:          0   Non-maskable interrupts
ERR:          0

Any way to find out why there are so many of them? System is using dynamic ticks:
{pts/1}:~/src/linux-git%> grep NO_HZ /boot/config CONFIG_NO_HZ=y

TIA

-andrey