forcdeth: increase max_interrupt_work
Forcedeth: increase max_interrupt_work
This eliminates the following often-generated warning from my 64 bit Opteron SMP test stand:
eth0: too many iterations (6) in nv_nic_irq
According to the web, the problem is that the forcedeth driver has a too-low value for max_interrupt_work. Grepping the kernel I see that forcedeth has the second lowest value of all ethernet drivers (ie, 6). Most are in the 20-40 range. So this patch increases this a bit, from 6 to 15 (at 15 forcedeth becomes the driver with third-lowest max_interrupt_work value).
My test stand, which used to print out the above warnings repetitively whenever it was under heavy net load, no longer does so.
drivers/net/forcedeth.c +1 -1
@@ -818,7 +818,7 @@* Maximum number of loops until we assume that a bit in the irq mask * is stuck. Overridable with module param. */ -static int max_interrupt_work =5 ; +static int max_interrupt_work =15 ;/* * Optimization can be either throuput mode or cpu mode
Quoted 7 lines · Joe Korty
Forcedeth: increase
max_interrupt_workThis eliminates the following often-generated warning from my 64 bit Opteron SMP test stand:
eth0: too many iterations (6) in
nv_nic_irq
Quoted 7 lines
According to the web, the problem is that the forcedeth driver has a too-low value for
max_interrupt_work. Grepping the kernel I see that forcedeth has the second lowest value of all ethernet drivers (ie, 6). Most are in the 20-40 range. So this patch increases this a bit, from 6 to 15 (at 15 forcedeth becomes the driver with third-lowestmax_interrupt_workvalue).
I'll add that I also see this warning now and then.
Signature · 2 lines
Tobias PGP: http://9ac7e0bc.uguu.de このメールは十割再利用されたビットで作られています。