b43: Move remaining code from phy.c to phy_a.c

Index: wireless-testing/drivers/net/wireless/b43/phy.c
===================================================================
@@ -1,489 +0,0 @@
-/*
-
-  Broadcom B43 wireless driver
-
-  Copyright (c) 2005 Martin Langer <[email protected]>,
-  Copyright (c) 2005-2007 Stefano Brivio <[email protected]>
-  Copyright (c) 2005, 2006 Michael Buesch <[email protected]>
-  Copyright (c) 2005, 2006 Danny van Dyk <[email protected]>
-  Copyright (c) 2005, 2006 Andreas Jaggi <[email protected]>
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; see the file COPYING.  If not, write to
-  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
-  Boston, MA 02110-1301, USA.
-
-*/
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/bitrev.h>
-
-#include "b43.h"
-#include "phy.h"
-#include "nphy.h"
-#include "main.h"
-#include "tables.h"
-#include "lo.h"
-#include "wa.h"
-
-
-static void b43_shm_clear_tssi(struct b43_wldev *dev)
-{
-	struct b43_phy *phy = &dev->phy;
-
-	switch (phy->type) {
-	case B43_PHYTYPE_A:
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x0068, 0x7F7F);
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x006a, 0x7F7F);
-		break;
-	case B43_PHYTYPE_B:
-	case B43_PHYTYPE_G:
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F);
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F);
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F);
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F);
-		break;
-	}
-}
-
-/* http://bcm-specs.sipsolutions.net/EstimatePowerOut
- * This function converts a TSSI value to dBm in Q5.2
- */
-static s8 b43_phy_estimate_power_out(struct b43_wldev *dev, s8 tssi)
-{
-	struct b43_phy *phy = &dev->phy;
-	s8 dbm = 0;
-	s32 tmp;
-
-	tmp = (phy->tgt_idle_tssi - phy->cur_idle_tssi + tssi);
-
-	switch (phy->type) {
-	case B43_PHYTYPE_A:
-		tmp += 0x80;
-		tmp = clamp_val(tmp, 0x00, 0xFF);
-		dbm = phy->tssi2dbm[tmp];
-		//TODO: There's a FIXME on the specs
-		break;
-	case B43_PHYTYPE_B:
-	case B43_PHYTYPE_G:
-		tmp = clamp_val(tmp, 0x00, 0x3F);
-		dbm = phy->tssi2dbm[tmp];
-		break;
-	default:
-		B43_WARN_ON(1);
-	}
-
-	return dbm;
-}
-
-void b43_put_attenuation_into_ranges(struct b43_wldev *dev,
-				     int *_bbatt, int *_rfatt)
-{
-	int rfatt = *_rfatt;
-	int bbatt = *_bbatt;
-	struct b43_txpower_lo_control *lo = dev->phy.lo_control;
-
-	/* Get baseband and radio attenuation values into their permitted ranges.
-	 * Radio attenuation affects power level 4 times as much as baseband. */
-
-	/* Range constants */
-	const int rf_min = lo->rfatt_list.min_val;
-	const int rf_max = lo->rfatt_list.max_val;
-	const int bb_min = lo->bbatt_list.min_val;
-	const int bb_max = lo->bbatt_list.max_val;
-
-	while (1) {
-		if (rfatt > rf_max && bbatt > bb_max - 4)
-			break;	/* Can not get it into ranges */
-		if (rfatt < rf_min && bbatt < bb_min + 4)
-			break;	/* Can not get it into ranges */
-		if (bbatt > bb_max && rfatt > rf_max - 1)
-			break;	/* Can not get it into ranges */
-		if (bbatt < bb_min && rfatt < rf_min + 1)
-			break;	/* Can not get it into ranges */
-
-		if (bbatt > bb_max) {
-			bbatt -= 4;
-			rfatt += 1;
-			continue;
-		}
-		if (bbatt < bb_min) {
-			bbatt += 4;
-			rfatt -= 1;
-			continue;
-		}
-		if (rfatt > rf_max) {
-			rfatt -= 1;
-			bbatt += 4;
-			continue;
-		}
-		if (rfatt < rf_min) {
-			rfatt += 1;
-			bbatt -= 4;
-			continue;
-		}
-		break;
-	}
-
-	*_rfatt = clamp_val(rfatt, rf_min, rf_max);
-	*_bbatt = clamp_val(bbatt, bb_min, bb_max);
-}
-
-/* http://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */
-void b43_phy_xmitpower(struct b43_wldev *dev)
-{
-	struct ssb_bus *bus = dev->dev->bus;
-	struct b43_phy *phy = &dev->phy;
-
-	if (phy->cur_idle_tssi == 0)
-		return;
-	if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
-	    (bus->boardinfo.type == SSB_BOARD_BU4306))
-		return;
-#ifdef CONFIG_B43_DEBUG
-	if (phy->manual_txpower_control)
-		return;
-#endif
-
-	switch (phy->type) {
-	case B43_PHYTYPE_A:{
-
-			//TODO: Nothing for A PHYs yet :-/
-
-			break;
-		}
-	case B43_PHYTYPE_B:
-	case B43_PHYTYPE_G:{
-			u16 tmp;
-			s8 v0, v1, v2, v3;
-			s8 average;
-			int max_pwr;
-			int desired_pwr, estimated_pwr, pwr_adjust;
-			int rfatt_delta, bbatt_delta;
-			int rfatt, bbatt;
-			u8 tx_control;
-
-			tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0058);
-			v0 = (s8) (tmp & 0x00FF);
-			v1 = (s8) ((tmp & 0xFF00) >> 8);
-			tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x005A);
-			v2 = (s8) (tmp & 0x00FF);
-			v3 = (s8) ((tmp & 0xFF00) >> 8);
-			tmp = 0;
-
-			if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F
-			    || v3 == 0x7F) {
-				tmp =
-				    b43_shm_read16(dev, B43_SHM_SHARED, 0x0070);
-				v0 = (s8) (tmp & 0x00FF);
-				v1 = (s8) ((tmp & 0xFF00) >> 8);
-				tmp =
-				    b43_shm_read16(dev, B43_SHM_SHARED, 0x0072);
-				v2 = (s8) (tmp & 0x00FF);
-				v3 = (s8) ((tmp & 0xFF00) >> 8);
-				if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F
-				    || v3 == 0x7F)
-					return;
-				v0 = (v0 + 0x20) & 0x3F;
-				v1 = (v1 + 0x20) & 0x3F;
-				v2 = (v2 + 0x20) & 0x3F;
-				v3 = (v3 + 0x20) & 0x3F;
-				tmp = 1;
-			}
-			b43_shm_clear_tssi(dev);
-
-			average = (v0 + v1 + v2 + v3 + 2) / 4;
-
-			if (tmp
-			    && (b43_shm_read16(dev, B43_SHM_SHARED, 0x005E) &
-				0x8))
-				average -= 13;
-
-			estimated_pwr =
-			    b43_phy_estimate_power_out(dev, average);
-
-			max_pwr = dev->dev->bus->sprom.maxpwr_bg;
-			if ((dev->dev->bus->sprom.boardflags_lo
-			    & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G))
-				max_pwr -= 0x3;
-			if (unlikely(max_pwr <= 0)) {
-				b43warn(dev->wl,
-					"Invalid max-TX-power value in SPROM.\n");
-				max_pwr = 60;	/* fake it */
-				dev->dev->bus->sprom.maxpwr_bg = max_pwr;
-			}
-
-			/*TODO:
-			   max_pwr = min(REG - dev->dev->bus->sprom.antennagain_bgphy - 0x6, max_pwr)
-			   where REG is the max power as per the regulatory domain
-			 */
-
-			/* Get desired power (in Q5.2) */
-			desired_pwr = INT_TO_Q52(phy->power_level);
-			/* And limit it. max_pwr already is Q5.2 */
-			desired_pwr = clamp_val(desired_pwr, 0, max_pwr);
-			if (b43_debug(dev, B43_DBG_XMITPOWER)) {
-				b43dbg(dev->wl,
-				       "Current TX power output: " Q52_FMT
-				       " dBm, " "Desired TX power output: "
-				       Q52_FMT " dBm\n", Q52_ARG(estimated_pwr),
-				       Q52_ARG(desired_pwr));
-			}
-
-			/* Calculate the adjustment delta. */
-			pwr_adjust = desired_pwr - estimated_pwr;
-
-			/* RF attenuation delta. */
-			rfatt_delta = ((pwr_adjust + 7) / 8);
-			/* Lower attenuation => Bigger power output. Negate it. */
-			rfatt_delta = -rfatt_delta;
-
-			/* Baseband attenuation delta. */
-			bbatt_delta = pwr_adjust / 2;
-			/* Lower attenuation => Bigger power output. Negate it. */
-			bbatt_delta = -bbatt_delta;
-			/* RF att affects power level 4 times as much as
-			 * Baseband attennuation. Subtract it. */
-			bbatt_delta -= 4 * rfatt_delta;
-
-			/* So do we finally need to adjust something? */
-			if ((rfatt_delta == 0) && (bbatt_delta == 0))
-				return;
-
-			/* Calculate the new attenuation values. */
-			bbatt = phy->bbatt.att;
-			bbatt += bbatt_delta;
-			rfatt = phy->rfatt.att;
-			rfatt += rfatt_delta;
-
-			b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
-			tx_control = phy->tx_control;
-			if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) {
-				if (rfatt <= 1) {
-					if (tx_control == 0) {
-						tx_control =
-						    B43_TXCTL_PA2DB |
-						    B43_TXCTL_TXMIX;
-						rfatt += 2;
-						bbatt += 2;
-					} else if (dev->dev->bus->sprom.
-						   boardflags_lo &
-						   B43_BFL_PACTRL) {
-						bbatt += 4 * (rfatt - 2);
-						rfatt = 2;
-					}
-				} else if (rfatt > 4 && tx_control) {
-					tx_control = 0;
-					if (bbatt < 3) {
-						rfatt -= 3;
-						bbatt += 2;
-					} else {
-						rfatt -= 2;
-						bbatt -= 2;
-					}
-				}
-			}
-			/* Save the control values */
-			phy->tx_control = tx_control;
-			b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
-			phy->rfatt.att = rfatt;
-			phy->bbatt.att = bbatt;
-
-			/* Adjust the hardware */
-			b43_phy_lock(dev);
-			b43_radio_lock(dev);
-			b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt,
-					  phy->tx_control);
-			b43_radio_unlock(dev);
-			b43_phy_unlock(dev);
-			break;
-		}
-	case B43_PHYTYPE_N:
-		b43_nphy_xmitpower(dev);
-		break;
-	default:
-		B43_WARN_ON(1);
-	}
-}
-
-static inline s32 b43_tssi2dbm_ad(s32 num, s32 den)
-{
-	if (num < 0)
-		return num / den;
-	else
-		return (num + den / 2) / den;
-}
-
-static inline
-    s8 b43_tssi2dbm_entry(s8 entry[], u8 index, s16 pab0, s16 pab1, s16 pab2)
-{
-	s32 m1, m2, f = 256, q, delta;
-	s8 i = 0;
-
-	m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32);
-	m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1);
-	do {
-		if (i > 15)
-			return -EINVAL;
-		q = b43_tssi2dbm_ad(f * 4096 -
-				    b43_tssi2dbm_ad(m2 * f, 16) * f, 2048);
-		delta = abs(q - f);
-		f = q;
-		i++;
-	} while (delta >= 2);
-	entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128);
-	return 0;
-}
-
-/* http://bcm-specs.sipsolutions.net/TSSI_to_DBM_Table */
-int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev)
-{
-	struct b43_phy *phy = &dev->phy;
-	s16 pab0, pab1, pab2;
-	u8 idx;
-	s8 *dyn_tssi2dbm;
-
-	if (phy->type == B43_PHYTYPE_A) {
-		pab0 = (s16) (dev->dev->bus->sprom.pa1b0);
-		pab1 = (s16) (dev->dev->bus->sprom.pa1b1);
-		pab2 = (s16) (dev->dev->bus->sprom.pa1b2);
-	} else {
-		pab0 = (s16) (dev->dev->bus->sprom.pa0b0);
-		pab1 = (s16) (dev->dev->bus->sprom.pa0b1);
-		pab2 = (s16) (dev->dev->bus->sprom.pa0b2);
-	}
-
-	if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
-		phy->tgt_idle_tssi = 0x34;
-		phy->tssi2dbm = b43_tssi2dbm_b_table;
-		return 0;
-	}
-
-	if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
-	    pab0 != -1 && pab1 != -1 && pab2 != -1) {
-		/* The pabX values are set in SPROM. Use them. */
-		if (phy->type == B43_PHYTYPE_A) {
-			if ((s8) dev->dev->bus->sprom.itssi_a != 0 &&
-			    (s8) dev->dev->bus->sprom.itssi_a != -1)
-				phy->tgt_idle_tssi =
-				    (s8) (dev->dev->bus->sprom.itssi_a);
-			else
-				phy->tgt_idle_tssi = 62;
-		} else {
-			if ((s8) dev->dev->bus->sprom.itssi_bg != 0 &&
-			    (s8) dev->dev->bus->sprom.itssi_bg != -1)
-				phy->tgt_idle_tssi =
-				    (s8) (dev->dev->bus->sprom.itssi_bg);
-			else
-				phy->tgt_idle_tssi = 62;
-		}
-		dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);
-		if (dyn_tssi2dbm == NULL) {
-			b43err(dev->wl, "Could not allocate memory "
-			       "for tssi2dbm table\n");
-			return -ENOMEM;
-		}
-		for (idx = 0; idx < 64; idx++)
-			if (b43_tssi2dbm_entry
-			    (dyn_tssi2dbm, idx, pab0, pab1, pab2)) {
-				phy->tssi2dbm = NULL;
-				b43err(dev->wl, "Could not generate "
-				       "tssi2dBm table\n");
-				kfree(dyn_tssi2dbm);
-				return -ENODEV;
-			}
-		phy->tssi2dbm = dyn_tssi2dbm;
-		phy->dyn_tssi_tbl = 1;
-	} else {
-		/* pabX values not set in SPROM. */
-		switch (phy->type) {
-		case B43_PHYTYPE_A:
-			/* APHY needs a generated table. */
-			phy->tssi2dbm = NULL;
-			b43err(dev->wl, "Could not generate tssi2dBm "
-			       "table (wrong SPROM info)!\n");
-			return -ENODEV;
-		case B43_PHYTYPE_B:
-			phy->tgt_idle_tssi = 0x34;
-			phy->tssi2dbm = b43_tssi2dbm_b_table;
-			break;
-		case B43_PHYTYPE_G:
-			phy->tgt_idle_tssi = 0x34;
-			phy->tssi2dbm = b43_tssi2dbm_g_table;
-			break;
-		}
-	}
-
-	return 0;
-}
-
-void b43_radio_turn_on(struct b43_wldev *dev)
-{
-	struct b43_phy *phy = &dev->phy;
-	int err;
-	u8 channel;
-
-	might_sleep();
-
-	if (phy->radio_on)
-		return;
-
-	switch (phy->type) {
-	case B43_PHYTYPE_A:
-		b43_radio_write16(dev, 0x0004, 0x00C0);
-		b43_radio_write16(dev, 0x0005, 0x0008);
-		b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7);
-		b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7);
-		b43_radio_init2060(dev);
-		break;
-	case B43_PHYTYPE_B:
-	case B43_PHYTYPE_G:
-		//XXX
-		break;
-	case B43_PHYTYPE_N:
-		b43_nphy_radio_turn_on(dev);
-		break;
-	default:
-		B43_WARN_ON(1);
-	}
-	phy->radio_on = 1;
-}
-
-void b43_radio_turn_off(struct b43_wldev *dev, bool force)
-{
-	struct b43_phy *phy = &dev->phy;
-
-	if (!phy->radio_on && !force)
-		return;
-
-	switch (phy->type) {
-	case B43_PHYTYPE_N:
-		b43_nphy_radio_turn_off(dev);
-		break;
-	case B43_PHYTYPE_A:
-		b43_radio_write16(dev, 0x0004, 0x00FF);
-		b43_radio_write16(dev, 0x0005, 0x00FB);
-		b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008);
-		b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008);
-		break;
-	case B43_PHYTYPE_G: {
-		//XXX
-		break;
-	}
-	default:
-		B43_WARN_ON(1);
-	}
-	phy->radio_on = 0;
-}

145 lines not on this page · raw message

Index: wireless-testing/drivers/net/wireless/b43/phy_a.h
===================================================================
@@ -102,12 +102,20 @@ void b43_ofdmtab_write32(struct b43_wlde
 			 u16 offset, u32 value);
 
 
 struct b43_phy_a {
 	bool initialised;
 
+	/* Pointer to the table used to convert a
+	 * TSSI value to dBm-Q5.2 */
+	const s8 *tssi2dbm;
+	/* Target idle TSSI */
+	int tgt_idle_tssi;
+	/* Current idle TSSI */
+	int cur_idle_tssi;//FIXME value currently not set
+
 	/* A-PHY TX Power control value. */
 	u16 txpwr_offset;
 
 	//TODO lots of missing stuff
 };
 

Index: wireless-testing/drivers/net/wireless/b43/phy_g.h
===================================================================
@@ -199,11 +199,13 @@ struct b43_phy_g {
 
 void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev,
 				       u16 baseband_attenuation);
 void b43_gphy_channel_switch(struct b43_wldev *dev,
 			     unsigned int channel,
 			     bool synthetic_pu_workaround);
+u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
+				   s16 pab0, s16 pab1, s16 pab2);
 
 struct b43_phy_operations;
 extern const struct b43_phy_operations b43_phyops_g;
 
 #endif /* LINUX_B43_PHY_G_H_ */