ASoC: Convert tlv320aic3x to a new-style i2c driver

@@ -1172,71 +1172,39 @@ static struct snd_soc_device *aic3x_socd
  * AIC3X 2 wire address can be up to 4 devices with device addresses
  * 0x18, 0x19, 0x1A, 0x1B
  */
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
-
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver aic3x_i2c_driver;
-static struct i2c_client client_template;
 
 /*
  * If the i2c layer weren't so broken, we could pass this kind of data
  * around
  */
-static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int aic3x_i2c_probe(struct i2c_client *i2c,
+			   const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = aic3x_socdev;
-	struct aic3x_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		printk(KERN_ERR "aic3x: failed to attach codec at addr %x\n",
-		       addr);
-		goto err;
-	}
-
 	ret = aic3x_init(socdev);
-	if (ret < 0) {
+	if (ret < 0)
 		printk(KERN_ERR "aic3x: failed to initialise AIC3X\n");
-		goto err;
-	}
-	return ret;
-
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int aic3x_i2c_detach(struct i2c_client *client)
+static int aic3x_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int aic3x_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, aic3x_codec_probe);
-}
+static const struct i2c_device_id aic3x_i2c_id[] = {
+	{ "tlv320aic3x", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id);
 
 /* machine i2c codec control layer */
 static struct i2c_driver aic3x_i2c_driver = {

@@ -1244,13 +1212,9 @@ static struct i2c_driver aic3x_i2c_drive
 		.name = "aic3x I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.attach_adapter = aic3x_i2c_attach,
-	.detach_client = aic3x_i2c_detach,
-};
-
-static struct i2c_client client_template = {
-	.name = "AIC3X",
-	.driver = &aic3x_i2c_driver,
+	.probe = aic3x_i2c_probe,
+	.remove = aic3x_i2c_remove,
+	.id_table = aic3x_i2c_id,
 };
 
 static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len)

@@ -1258,6 +1222,46 @@ static int aic3x_i2c_read(struct i2c_cli
 	value[0] = i2c_smbus_read_byte_data(client, value[0]);
 	return (len == 1);
 }
+
+static int aic3x_add_i2c_device(struct platform_device *pdev,
+				 const struct aic3x_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&aic3x_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "tlv320aic3x", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&aic3x_i2c_driver);
+	return -ENODEV;
+}
 #endif
 
 static int aic3x_probe(struct platform_device *pdev)

@@ -1290,12 +1294,9 @@ static int aic3x_probe(struct platform_d
 	aic3x_socdev = socdev;
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t) i2c_master_send;
 		codec->hw_read = (hw_read_t) aic3x_i2c_read;
-		ret = i2c_add_driver(&aic3x_i2c_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+		ret = aic3x_add_i2c_device(pdev, setup);
 	}
 #else
 	/* Add other interfaces here */

@@ -1320,6 +1321,7 @@ static int aic3x_remove(struct platform_
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&aic3x_i2c_driver);
 #endif
 	kfree(codec->private_data);

@@ -224,6 +224,7 @@ int aic3x_get_gpio(struct snd_soc_codec 
 int aic3x_headset_detected(struct snd_soc_codec *codec);
 
 struct aic3x_setup_data {
+	int i2c_bus;
 	unsigned short i2c_address;
 	unsigned int gpio_func[2];
 };

@@ -136,6 +136,7 @@ static struct snd_soc_machine snd_soc_ma
 
 /* evm audio private data */
 static struct aic3x_setup_data evm_aic3x_setup = {
+	.i2c_bus = 0,
 	.i2c_address = 0x1b,
 };
 

@@ -290,6 +290,7 @@ static struct snd_soc_machine snd_soc_ma
 
 /* Audio private data */
 static struct aic3x_setup_data n810_aic33_setup = {
+	.i2c_bus = 0,
 	.i2c_address = 0x18,
 	.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
 	.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,

@@ -691,15 +691,15 @@ void __init nokia_n800_common_init(void)
 				ARRAY_SIZE(n810_spi_board_info));
 	}
 	omap_serial_init();
-	omap_register_i2c_bus(1, 400, n800_i2c_board_info_1,
+	omap_register_i2c_bus(0, 400, n800_i2c_board_info_1,
 			      ARRAY_SIZE(n800_i2c_board_info_1));
-	omap_register_i2c_bus(2, 400, n8x0_i2c_board_info_2,
+	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_2,
 			      ARRAY_SIZE(n800_i2c_board_info_2));
 	if (machine_is_nokia_n800())
-		i2c_register_board_info(2, n800_i2c_board_info_2,
+		i2c_register_board_info(1, n800_i2c_board_info_2,
 			ARRAY_SIZE(n800_i2c_board_info_2));
 	if (machine_is_nokia_n810())
-		i2c_register_board_info(2, n810_i2c_board_info_2,
+		i2c_register_board_info(1, n810_i2c_board_info_2,
 			ARRAY_SIZE(n810_i2c_board_info_2));
 		
 	mipid_dev_init();

index 89a6ab0..83ef7cf 100644
@@ -134,7 +134,7 @@ int __init omap_register_i2c_bus(int bus_id, u32