Remove support for booting ARTOS images
PATCH v2 1/1 Remove support for booting ARTOS images
Pantelis Antoniou stated:
AFAIK, it is still used but the products using PPC are long gone. Nuke it plz (from orbit).
So remove it since it cleans up a usage of env_get_char outside of the environment code.
Signed-off-by Kumar Gala <[email protected]>
--- README | 4 +- common/cmd_bootm.c | 99 --------------------------------- common/image.c | 3 - doc/uImage.FIT/source_file_format.txt | 2 +- include/configs/NETPHONE.h | 2 - include/configs/NETTA.h | 2 - include/configs/NETTA2.h | 2 - include/configs/NETVIA.h | 2 - 8 files changed, 3 insertions(+), 113 deletions(-)
README +2 -2
@@ -3030,8 +3030,8 @@ details; basically, the header defines the following image properties: * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, - LynxOS, pSOS, QNX, RTEMS, ARTOS; - Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS). + LynxOS, pSOS, QNX, RTEMS; + Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS). * Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
common/cmd_bootm.c +0 -99
114 lines not on this page · raw message
common/image.c +0 -3
@@ -105,9 +105,6 @@ static table_entry_t uimage_arch[] = {static table_entry_t uimage_os[] = { {IH_OS_INVALID ,NULL ,"Invalid OS" , }, -#if defined(CONFIG_ARTOS) || defined(USE_HOSTCC) - {IH_OS_ARTOS ,"artos" ,"ARTOS" , }, -#endif {IH_OS_LINUX ,"linux" ,"Linux" , }, #if defined(CONFIG_LYNXKDI) || defined(USE_HOSTCC) { IH_OS_LYNXOS, "lynxos", "LynxOS", },
doc/uImage.FIT/source_file_format.txt +1 -1
@@ -169,7 +169,7 @@ the '/images' node should have the following layout: - os : OS name, mandatory for type="kernel", valid OS names are: "openbsd", "netbsd", "freebsd", "4_4bsd", "linux", "svr4", "esix", "solaris", "irix", "sco", "dell", "ncr", "lynxos", "vxworks", "psos", "qnx", "u_boot", - "rtems", "artos", "unity". + "rtems", "unity". - arch : Architecture name, mandatory for types: "standalone", "kernel", "firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha", "arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc",
include/configs/NETPHONE.h +0 -2
@@ -487,8 +487,6 @@#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_ARTOS /* include ARTOS support */ -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ /****************************************************************/
include/configs/NETTA.h +0 -2
@@ -496,8 +496,6 @@#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_ARTOS /* include ARTOS support */ -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ /***********************************************************************************************************
include/configs/NETTA2.h +0 -2
@@ -488,8 +488,6 @@#define BOOTFLAG_COLD 0x01/* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02/* Software reboot */ -#define CONFIG_ARTOS /* include ARTOS support */ -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ /****************************************************************/
include/configs/NETVIA.h +0 -2
@@ -357,8 +357,6 @@/* Ethernet at SCC2 */ #define CONFIG_SCC2_ENET -#define CONFIG_ARTOS /* include ARTOS support */ -/****************************************************************/ #define DSP_SIZE 0x00010000/* 64K */
Signature · 1 line
1.5.5.1
Wolfgang Denk
AppliedPATCH v2 1/1 Remove support for booting ARTOS images
Dear Kumar Gala,
Quoted 8 lines · In message <[email protected]> you…
Pantelis Antoniou stated:
AFAIK, it is still used but the products using PPC are long gone. Nuke it plz (from orbit).So remove it since it cleans up a usage of
env_get_charoutside of the environment code.Signed-off-by Kumar Gala <[email protected]>
Quoted 10 lines
--- README | 4 +- common/cmd_bootm.c | 99 --------------------------------- common/image.c | 3 - doc/uImage.FIT/source_file_format.txt | 2 +- include/configs/NETPHONE.h | 2 - include/configs/NETTA.h | 2 - include/configs/NETTA2.h | 2 - include/configs/NETVIA.h | 2 - 8 files changed, 3 insertions(+), 113 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de HEALTH WARNING: Care Should Be Taken When Lifting This Product, Since Its Mass, and Thus Its Weight, Is Dependent on Its Velocity Relative to the User.