ARM Pull Request
Hi Wolfgang,
Please pull
The following changes since commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836:
Heiko Schocher (1):
muas3001: update BR4 settings
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Adrian Filipi (1):
Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
Andrew Dyer (3):
arm920t fix constant error in start.S
i.MX use u-boot baud rate and don't assume UART master clock i.mx change get_timer(base) to return time since base
Claudio Scordino (1):
Fix MACH_TYPE for the AT91RM9200DK board.
Guennadi Liakhovetski (1):
i.MX31: document timer precision option
Gururaja Hebbar K R (1):
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
Hugo Villeneuve (1):
ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
Jean-Christophe PLAGNIOL-VILLARD (1):
ARM: synchronize mach-types.h with linux 2.6.27-rc6
Jens Scharsig (1):
at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
Magnus Lilja (2):
i.MX31: Add reset_timer() and modify get_timer_masked(). i.MX31: Make the SPI bus and chip select configurable for MC13783
Shinya Kuribayashi (1):
make: Remove redundant __ARM__ addition when cross-compiling on *BSD
README.imx31 | 13 + board/atmel/at91rm9200dk/at91rm9200dk.c | 2 +- config.mk | 9 - cpu/arm1136/mx31/interrupts.c | 24 +- cpu/arm920t/at91rm9200/i2c.c | 10 + cpu/arm920t/imx/interrupts.c | 2 +- cpu/arm920t/imx/serial.c | 56 +- cpu/arm920t/start.S | 6 +- cpu/arm926ejs/davinci/dp83848.c | 27 +- cpu/pxa/mmc.c | 4 +- doc/README.mx31 | 19 + drivers/rtc/mc13783-rtc.c | 6 +- include/asm-arm/mach-types.h | 3645 +++++++++++++++++++++++++++++-- include/configs/imx31_litekit.h | 3 + include/configs/mx31ads.h | 3 + include/configs/omap1510.h | 2 +- include/configs/omap730.h | 2 +- 17 files changed, 3648 insertions(+), 185 deletions(-) create mode 100644 README.imx31 create mode 100644 doc/README.mx31 mode change 100644 => 100755 include/configs/omap1510.h mode change 100644 => 100755 include/configs/omap730.h
Best Regards,
J.
Wolfgang Denk
AppliedDear Jean-Christophe PLAGNIOL-VILLARD,
Quoted 66 lines · In message <[email protected]> you wrote:
Hi Wolfgang,
Please pull
The following changes since commit0b7c5639891f4103a0e31ec7ae0beb3e97ed3836:
Heiko Schocher (1):
muas3001: update BR4 settingsare available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAdrian Filipi (1):
Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.Andrew Dyer (3):
arm920t fix constant error instart.S
i.MX use u-boot baud rate and don't assume UART master clock i.mx changeget_timer(base)to return time since baseClaudio Scordino (1):
FixMACH_TYPEfor the AT91RM9200DK board.Guennadi Liakhovetski (1):
i.MX31: document timer precision optionGururaja Hebbar K R (1):
ARM OMAP : Correct Invalid Timer Register Field Declaration inomap1510.h&omap730.hHugo Villeneuve (1):
ARM DaVinci: Remove duplicate code incpu/arm926ejs/davinci/dp83848.cJean-Christophe PLAGNIOL-VILLARD (1):
ARM: synchronizemach-types.hwith linux 2.6.27-rc6Jens Scharsig (1):
at91rm9200: fix errors withCONFIG_CMD_I2C_TREEMagnus Lilja (2):
i.MX31: Addreset_timer()and modifyget_timer_masked(). i.MX31: Make the SPI bus and chip select configurable for MC13783Shinya Kuribayashi (1):
make: Remove redundant__ARM__addition when cross-compiling on *BSDREADME.imx31 | 13 + board/atmel/at91rm9200dk/at91rm9200dk.c | 2 +- config.mk | 9 - cpu/arm1136/mx31/interrupts.c | 24 +- cpu/arm920t/at91rm9200/i2c.c | 10 + cpu/arm920t/imx/interrupts.c | 2 +- cpu/arm920t/imx/serial.c | 56 +- cpu/arm920t/start.S | 6 +- cpu/arm926ejs/davinci/dp83848.c | 27 +- cpu/pxa/mmc.c | 4 +- doc/README.mx31 | 19 + drivers/rtc/mc13783-rtc.c | 6 +- include/asm-arm/mach-types.h | 3645 +++++++++++++++++++++++++++++-- include/configs/imx31_litekit.h | 3 + include/configs/mx31ads.h | 3 + include/configs/omap1510.h | 2 +- include/configs/omap730.h | 2 +- 17 files changed, 3648 insertions(+), 185 deletions(-) create mode 100644 README.imx31 create mode 100644 doc/README.mx31 mode change 100644 => 100755 include/configs/omap1510.h mode change 100644 => 100755 include/configs/omap730.h
Quoted 1 line
Best Regards,
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A star captain's most solemn oath is that he will give his life, even his entire crew, rather than violate the Prime Directive. -- Kirk, "The Omega Glory", stardate unknown