Fix itimer/many thread hang.
Subsystems (7)
PATCH 1/1 Fix itimer/many thread hang.
This is a resubmission of the posix timer rework patch, posted a few days ago. This addresses Oleg Nesterov's comments, removing the RCU stuff from the patch and un-inlining the thread_group_cputime() function for SMP. I left the function itself as an inline defined in sched.h but the SMP version just calls thread_group_cputime_smp() which is defined in posix-cpu-timers.c. (The UP version was a one-liner; I left it as an inline.)
The original README follows (to keep it together with the patch itself):
Overview
This patch reworks the handling of POSIX CPU timers, including the ITIMER_PROF, ITIMER_VIRT timers and rlimit handling. It was put together with the help of Roland McGrath, the owner and original writer of this code.
The problem we ran into, and the reason for this rework, has to do with using a profiling timer in a process with a large number of threads. It appears that the performance of the old implementation of run_posix_cpu_timers() was at least O(n*3) (where "n" is the number of threads in a process) or worse. Everything is fine with an increasing number of threads until the time taken for that routine to run becomes the same as or greater than the tick time, at which point things degrade rather quickly.
This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF."
Code Changes
This rework corrects the implementation of run_posix_cpu_timers() to make it run in constant time for a particular machine. (Performance may vary between one machine and another depending upon whether the kernel is built as single- or multiprocessor and, in the latter case, depending upon the number of running processors.) To do this, at each tick we now update fields in signal_struct as well as task_struct. The run_posix_cpu_timers() function uses those fields to make its decisions.
We define a new structure, "task_cputime," to contain user, system and scheduler times and use these in appropriate places:
struct task_cputime {
cputime_t utime;
cputime_t stime;
unsigned long long sum_exec_runtime;
};This is included in the structure "thread_group_cputime," which is a new substructure of signal_struct and which varies for uniprocessor versus multiprocessor kernels. For uniprocessor kernels, it uses "task_cputime" as a simple substructure, while for multiprocessor kernels it is a pointer:
struct thread_group_cputime {
struct task_cputime totals;
};struct thread_group_cputime {
struct task_cputime *totals;
};We also add a new task_cputime substructure directly to signal_struct, to cache the earliest expiration of process-wide timers, and task_cputime also replaces the it_*_expires fields of task_struct (used for earliest expiration of thread timers). The "thread_group_cputime" structure contains process-wide timers that are updated via account_user_time() and friends. In the non-SMP case the structure is a simple aggregator; unfortunately in the SMP case that simplicity was not achievable due to cache-line contention between CPUs (in one measured case performance was actually _worse_ on a 16-cpu system than the same test on a 4-cpu system, due to this contention). For SMP, the thread_group_cputime counters are maintained as a per-cpu structure allocated using alloc_percpu(). The timer functions update only the timer field in the structure corresponding to the running CPU, obtained using per_cpu_ptr().
We define a set of inline functions in sched.h that we use to maintain the thread_group_cputime structure and hide the differences between UP and SMP implementations from the rest of the kernel. The thread_group_cputime_init() function initializes the thread_group_cputime structure for the given task. The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the out-of-line function thread_group_cputime_alloc_smp() to allocate and fill in the per-cpu structures and fields. The thread_group_cputime_free() function, also a no-op for UP, in SMP frees the per-cpu structures. The thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls thread_group_cputime_alloc() if the per-cpu structures haven't yet been allocated. The thread_group_cputime() function fills the task_cputime structure it is passed with the contents of the thread_group_cputime fields; in UP it's that simple but in SMP it must also safely check that tsk->signal is non-NULL (if it is it just uses the appropriate fields of task_struct) and, if so, sums the per-cpu values for each online CPU. Finally, the three functions account_group_user_time(), account_group_system_time() and account_group_exec_runtime() are used by timer functions to update the respective fields of the thread_group_cputime structure.
Non-SMP operation is trivial and will not be mentioned further.
The per-cpu structure is always allocated when a task creates its first new thread, via a call to thread_group_cputime_clone_thread() from copy_signal(). It is freed at process exit via a call to thread_group_cputime_free() from cleanup_signal().
All functions that formerly summed utime/stime/sum_sched_runtime values from from all threads in the thread group now use thread_group_cputime() to snapshot the values in the thread_group_cputime structure or the values in the task structure itself if the per-cpu structure hasn't been allocated.
Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit. The run_posix_cpu_timers() function has been split into a fast path and a slow path; the former safely checks whether there are any expired thread timers and, if not, just returns, while the slow path does the heavy lifting. With the dedicated thread group fields, timers are no longer "rebalanced" and the process_timer_rebalance() function and related code has gone away. All summing loops are gone and all code that used them now uses the thread_group_cputime() inline. When process-wide timers are set, the new task_cputime structure in signal_struct is used to cache the earliest expiration; this is checked in the fast path.
Performance
The fix appears not to add significant overhead to existing operations. It generally performs the same as the current code except in two cases, one in which it performs slightly worse (Case 5 below) and one in which it performs very significantly better (Case 2 below). Overall it's a wash except in those two cases.
I've since done somewhat more involved testing on a dual-core Opteron system.
Case 1: With no itimer running, for a test with 100,000 threads, the fixed
kernel took 1428.5 seconds, 513 seconds more than the unfixed system, all of which was spent in the system. There were twice as many voluntary context switches with the fix as without it.
Case 2: With an itimer running at .01 second ticks and 4000 threads (the most
an unmodified kernel can handle), the fixed kernel ran the test in eight percent of the time (5.8 seconds as opposed to 70 seconds) and had better tick accuracy (.012 seconds per tick as opposed to .023 seconds per tick).
Case 3: A 4000-thread test with an initial timer tick of .01 second and an
interval of 10,000 seconds (i.e. a timer that ticks only once) had very nearly the same performance in both cases: 6.3 seconds elapsed for the fixed kernel versus 5.5 seconds for the unfixed kernel.
With fewer threads (eight in these tests), the Case 1 test ran in essentially the same time on both the modified and unmodified kernels (5.2 seconds versus 5.8 seconds). The Case 2 test ran in about the same time as well, 5.9 seconds versus 5.4 seconds but again with much better tick accuracy, .013 seconds per tick versus .025 seconds per tick for the unmodified kernel.
Since the fix affected the rlimit code, I also tested soft and hard CPU limits.
Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer
running), the modified kernel was very slightly favored in that while it killed the process in 19.997 seconds of CPU time (5.002 seconds of wall time), only .003 seconds of that was system time, the rest was user time. The unmodified kernel killed the process in 20.001 seconds of CPU (5.014 seconds of wall time) of which .016 seconds was system time. Really, though, the results were too close to call. The results were essentially the same with no itimer running.
Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds
(where the hard limit would never be reached) and an itimer running, the modified kernel exhibited worse tick accuracy than the unmodified
kernel: .050 seconds/tick versus .028 seconds/tick. Otherwise, performance was almost indistinguishable. With no itimer running this test exhibited virtually identical behavior and times in both cases.
In times past I did some limited performance testing. those results are below.
On a four-cpu Opteron system without this fix, a sixteen-thread test executed in 3569.991 seconds, of which user was 3568.435s and system was 1.556s. On the same system with the fix, user and elapsed time were about the same, but system time dropped to 0.007 seconds. Performance with eight, four and one thread were comparable. Interestingly, the timer ticks with the fix seemed more accurate: The sixteen-thread test with the fix received 149543 ticks for 0.024 seconds per tick, while the same test without the fix received 58720 for 0.061 seconds per tick. Both cases were configured for an interval of 0.01 seconds. Again, the other tests were comparable. Each thread in this test computed the primes up to 25,000,000.
I also did a test with a large number of threads, 100,000 threads, which is impossible without the fix. In this case each thread computed the primes only up to 10,000 (to make the runtime manageable). System time dominated, at 1546.968 seconds out of a total 2176.906 seconds (giving a user time of 629.938s). It received 147651 ticks for 0.015 seconds per tick, still quite accurate. There is obviously no comparable test without the fix.
fs/binfmt_elf.c | 19 +- fs/proc/array.c | 8 +- include/linux/posix-timers.h | 2 + include/linux/sched.h | 257 ++++++++++++++++++++++-- include/linux/time.h | 3 + kernel/compat.c | 53 ++---- kernel/exit.c | 19 +- kernel/fork.c | 88 +++++---- kernel/itimer.c | 33 +-- kernel/posix-cpu-timers.c | 471 ++++++++++++++++++++++-------------------- kernel/sched.c | 53 ++++- kernel/sched_fair.c | 1 + kernel/sched_rt.c | 4 +- kernel/signal.c | 8 +- kernel/sys.c | 75 +++----- security/selinux/hooks.c | 9 +- 16 files changed, 677 insertions(+), 426 deletions(-)
fs/binfmt_elf.c +7 -12
@@ -1333,20 +1333,15 @@ static void fill_prstatus(struct elf_prstatus *prstatus, prstatus->pr_pgrp =task_pgrp_vnr (p); prstatus->pr_sid =task_session_vnr (p);if (thread_group_leader (p)) { +struct task_cputime cputime; +/* -* This is the record for the group leader. Add in the -* cumulative times of previous dead threads. This total -* won't include the time of each live thread whose state -* is included in the core dump. The final total reported -* to our parent process when it calls wait4 will include -* those sums as well as the little bit more time it takes -* this and each other thread to finish dying after the -* core dump synchronization phase. +* This is the record for the group leader. It shows the +* group-wide total, not its individual thread total. */ -cputime_to_timeval (cputime_add (p->utime, p->signal->utime), - &prstatus->pr_utime); -cputime_to_timeval (cputime_add (p->stime, p->signal->stime), - &prstatus->pr_stime); +thread_group_cputime (p, &cputime); +cputime_to_timeval (cputime.utime, &prstatus->pr_utime); +cputime_to_timeval (cputime.stime, &prstatus->pr_stime); }else {cputime_to_timeval (p->utime, &prstatus->pr_utime);cputime_to_timeval (p->stime, &prstatus->pr_stime);
fs/proc/array.c +4 -4
@@ -395,20 +395,20 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,/* add up live thread stats at the group level */ if (whole) { +struct task_cputime cputime;struct task_struct *t = task;do { min_flt += t->min_flt; maj_flt += t->maj_flt; - utime =cputime_add (utime,task_utime (t)); - stime =cputime_add (stime,task_stime (t)); gtime =cputime_add (gtime,task_gtime (t)); t =next_thread (t); }while (t != task); min_flt += sig->min_flt; maj_flt += sig->maj_flt; - utime =cputime_add (utime, sig->utime); - stime =cputime_add (stime, sig->stime); +thread_group_cputime (task, &cputime); + utime = cputime.utime; + stime = cputime.stime; gtime =cputime_add (gtime, sig->gtime); }
include/linux/posix-timers.h +2 -0
@@ -115,4 +115,6 @@ void set_process_cpu_timer(struct task_struct *task, unsigned int clock_idx,long clock_nanosleep_restart (struct restart_block *restart_block); +void update_rlimit_cpu (unsigned long rlim_new); +#endif
include/linux/sched.h +244 -13
305 lines not on this page · raw message
include/linux/time.h +3 -0
@@ -125,6 +125,9 @@ extern int timekeeping_valid_for_hres(void);extern void update_wall_time (void );extern void update_xtime_cache (u64 nsec); +struct tms ; +extern void do_sys_times (struct tms *); +/** * timespec_to_ns - Convert timespec to nanoseconds * @ts: pointer to the timespec variable to be converted
kernel/compat.c +14 -39
69 lines not on this page · raw message
kernel/exit.c +10 -9
@@ -112,8 +112,6 @@ static void __exit_signal(struct task_struct *tsk)* We won't ever get here for the group leader, since it * will have been the last reference on the signal_struct. */ - sig->utime =cputime_add (sig->utime,task_utime (tsk)); - sig->stime =cputime_add (sig->stime,task_stime (tsk)); sig->gtime =cputime_add (sig->gtime,task_gtime (tsk)); sig->min_flt += tsk->min_flt; sig->maj_flt += tsk->maj_flt;
@@ -122,7 +120,6 @@ static void __exit_signal(struct task_struct *tsk) sig->inblock +=task_io_get_inblock (tsk); sig->oublock +=task_io_get_oublock (tsk);task_io_accounting_add (&sig->ioac, &tsk->ioac); - sig->sum_sched_runtime += tsk->se.sum_exec_runtime; sig =NULL ;/* Marker for below. */ }
@@ -1294,6 +1291,7 @@ static int wait_task_zombie(struct task_struct *p, int options,if (likely (!traced)) {struct signal_struct *psig;struct signal_struct *sig; +struct task_cputime cputime;/* * The resource counters for the group leader are in its
@@ -1309,20 +1307,23 @@ static int wait_task_zombie(struct task_struct *p, int options,* need to protect the access to p->parent->signal fields, * as other threads in the parent group can be right * here reaping other children at the same time. +* +* We use thread_group_cputime() to get times for the thread +* group, which consolidates times for all threads in the +* group including the group leader. */ spin_lock_irq (&p->parent->sighand->siglock); psig = p->parent->signal; sig = p->signal; +thread_group_cputime (p, &cputime); psig->cutime =cputime_add (psig->cutime, -cputime_add (p->utime, -cputime_add (sig->utime, - sig->cutime))); +cputime_add (cputime.utime, + sig->cutime)); psig->cstime =cputime_add (psig->cstime, -cputime_add (p->stime, -cputime_add (sig->stime, - sig->cstime))); +cputime_add (cputime.stime, + sig->cstime)); psig->cgtime = cputime_add(psig->cgtime, cputime_add(p->gtime,
kernel/fork.c +50 -38
139 lines not on this page · raw message
kernel/itimer.c +10 -23
@@ -55,17 +55,15 @@ int do_getitimer(int which, struct itimerval *value)spin_unlock_irq (&tsk->sighand->siglock);break ;case ITIMER_VIRTUAL : -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_virt_expires; cinterval = tsk->signal->it_virt_incr;if (!cputime_eq (cval, cputime_zero)) { -struct task_struct *t = tsk; -cputime_t utime = tsk->signal->utime; -do { - utime =cputime_add (utime, t->utime); - t =next_thread (t); - }while (t != tsk); +struct task_cputime cputime; +cputime_t utime; + +thread_group_cputime (tsk, &cputime); + utime = cputime.utime;if (cputime_le (cval, utime)) {/* about to fire */ cval =jiffies_to_cputime (1 ); }else {
@@ -73,25 +71,19 @@ int do_getitimer(int which, struct itimerval *value) } }spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);cputime_to_timeval (cval, &value->it_value);cputime_to_timeval (cinterval, &value->it_interval);break ;case ITIMER_PROF : -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_prof_expires; cinterval = tsk->signal->it_prof_incr;if (!cputime_eq (cval, cputime_zero)) { -struct task_struct *t = tsk; -cputime_t ptime =cputime_add (tsk->signal->utime, - tsk->signal->stime); -do { - ptime =cputime_add (ptime, -cputime_add (t->utime, - t->stime)); - t =next_thread (t); - }while (t != tsk); +struct task_cputime times; +cputime_t ptime; + +thread_group_cputime (tsk, ×); + ptime =cputime_add (times.utime, times.stime);if (cputime_le (cval, ptime)) {/* about to fire */ cval =jiffies_to_cputime (1 ); }else {
@@ -99,7 +91,6 @@ int do_getitimer(int which, struct itimerval *value) } }spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);cputime_to_timeval (cval, &value->it_value);cputime_to_timeval (cinterval, &value->it_interval);break ;
@@ -185,7 +176,6 @@ again:case ITIMER_VIRTUAL : nval =timeval_to_cputime (&value->it_value); ninterval =timeval_to_cputime (&value->it_interval); -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_virt_expires; cinterval = tsk->signal->it_virt_incr;
@@ -200,7 +190,6 @@ again: tsk->signal->it_virt_expires = nval; tsk->signal->it_virt_incr = ninterval;spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);if (ovalue) {cputime_to_timeval (cval, &ovalue->it_value);cputime_to_timeval (cinterval, &ovalue->it_interval);
@@ -209,7 +198,6 @@ again:case ITIMER_PROF : nval =timeval_to_cputime (&value->it_value); ninterval =timeval_to_cputime (&value->it_interval); -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_prof_expires; cinterval = tsk->signal->it_prof_incr;
@@ -224,7 +212,6 @@ again: tsk->signal->it_prof_expires = nval; tsk->signal->it_prof_incr = ninterval;spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);if (ovalue) {cputime_to_timeval (cval, &ovalue->it_value);cputime_to_timeval (cinterval, &ovalue->it_interval);
kernel/posix-cpu-timers.c +252 -219
630 lines not on this page · raw message
kernel/sched.c +45 -8
92 lines not on this page · raw message
kernel/sched_fair.c +1 -0
@@ -507,6 +507,7 @@ static void update_curr(struct cfs_rq *cfs_rq)struct task_struct *curtask =task_of (curr);cpuacct_charge (curtask, delta_exec); +account_group_exec_runtime (curtask, delta_exec); } }
kernel/sched_rt.c +3 -1
@@ -483,6 +483,8 @@ static void update_curr_rt(struct rq *rq)schedstat_set (curr->se.exec_max,max (curr->se.exec_max, delta_exec)); curr->se.sum_exec_runtime += delta_exec; +account_group_exec_runtime (curr, delta_exec); + curr->se.exec_start = rq->clock;cpuacct_charge (curr, delta_exec);
@@ -1412,7 +1414,7 @@ static void watchdog(struct rq *rq, struct task_struct *p) p->rt.timeout++; next =DIV_ROUND_UP (min (soft, hard),USEC_PER_SEC /HZ );if (p->rt.timeout > next) - p->it_sched_expires = p->se.sum_exec_runtime; + p->cputime_expires.sched_exp = p->se.sum_exec_runtime; } }
kernel/signal.c +4 -4
@@ -1338,6 +1338,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)struct siginfo info;unsigned long flags;struct sighand_struct *psig; +struct task_cputime cputime;int ret = sig;BUG_ON (sig ==-1 );
@@ -1368,10 +1369,9 @@ int do_notify_parent(struct task_struct *tsk, int sig) info.si_uid = tsk->uid; - info.si_utime =cputime_to_clock_t (cputime_add (tsk->utime, - tsk->signal->utime)); - info.si_stime =cputime_to_clock_t (cputime_add (tsk->stime, - tsk->signal->stime)); +thread_group_cputime (tsk, &cputime); + info.si_utime =cputime_to_jiffies (cputime.utime); + info.si_stime =cputime_to_jiffies (cputime.stime); info.si_status = tsk->exit_code &0x7f ;if (tsk->exit_code &0x80 )
kernel/sys.c +26 -49
127 lines not on this page · raw message
security/selinux/hooks.c +2 -7
@@ -75,6 +75,7 @@#include <linux/string.h> #include <linux/selinux.h> #include <linux/mutex.h> +#include <linux/posix-timers.h> #include "avc.h" #include "objsec.h"
@@ -2321,13 +2322,7 @@ static void selinux_bprm_post_apply_creds(struct linux_binprm *bprm) initrlim = init_task.signal->rlim+i; rlim->rlim_cur =min (rlim->rlim_max, initrlim->rlim_cur); } -if (current->signal->rlim[RLIMIT_CPU ].rlim_cur !=RLIM_INFINITY ) { -/* -* This will cause RLIMIT_CPU calculations -* to be refigured. -*/ - current->it_prof_expires =jiffies_to_cputime (1 ); - } +update_rlimit_cpu (rlim->rlim_cur); }/* Wake up the parent if it is waiting so that it can
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Andrew Morton
maintainerQuoted 1 line · On Fri, 12 Sep 2008 09:54:39 -0700 Frank Mayhar <[email protected]> wrote:
This is a resubmission of the posix timer rework patch, posted a few days ago.
It took a bit of massaging to make it all apply and compile on linux-next, but it looks like I got it landed OK.
From: Frank Mayhar <[email protected]>
Overview
This patch reworks the handling of POSIX CPU timers, including the ITIMER_PROF, ITIMER_VIRT timers and rlimit handling. It was put together with the help of Roland McGrath, the owner and original writer of this code.
The problem we ran into, and the reason for this rework, has to do with using a profiling timer in a process with a large number of threads. It appears that the performance of the old implementation of run_posix_cpu_timers() was at least O(n*3) (where "n" is the number of threads in a process) or worse. Everything is fine with an increasing number of threads until the time taken for that routine to run becomes the same as or greater than the tick time, at which point things degrade rather quickly.
This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=9906, "Weird hang with NPTL and SIGPROF."
Code Changes
This rework corrects the implementation of run_posix_cpu_timers() to make it run in constant time for a particular machine. (Performance may vary between one machine and another depending upon whether the kernel is built as single- or multiprocessor and, in the latter case, depending upon the number of running processors.) To do this, at each tick we now update fields in signal_struct as well as task_struct. The run_posix_cpu_timers() function uses those fields to make its decisions.
We define a new structure, "task_cputime," to contain user, system and scheduler times and use these in appropriate places:
struct task_cputime {
cputime_t utime;
cputime_t stime;
unsigned long long sum_exec_runtime;
};This is included in the structure "thread_group_cputime," which is a new substructure of signal_struct and which varies for uniprocessor versus multiprocessor kernels. For uniprocessor kernels, it uses "task_cputime" as a simple substructure, while for multiprocessor kernels it is a pointer:
struct thread_group_cputime {
struct task_cputime totals;
};struct thread_group_cputime {
struct task_cputime *totals;
};We also add a new task_cputime substructure directly to signal_struct, to cache the earliest expiration of process-wide timers, and task_cputime also replaces the it_*_expires fields of task_struct (used for earliest expiration of thread timers). The "thread_group_cputime" structure contains process-wide timers that are updated via account_user_time() and friends. In the non-SMP case the structure is a simple aggregator; unfortunately in the SMP case that simplicity was not achievable due to cache-line contention between CPUs (in one measured case performance was actually _worse_ on a 16-cpu system than the same test on a 4-cpu system, due to this contention). For SMP, the thread_group_cputime counters are maintained as a per-cpu structure allocated using alloc_percpu(). The timer functions update only the timer field in the structure corresponding to the running CPU, obtained using per_cpu_ptr().
We define a set of inline functions in sched.h that we use to maintain the thread_group_cputime structure and hide the differences between UP and SMP implementations from the rest of the kernel. The thread_group_cputime_init() function initializes the thread_group_cputime structure for the given task. The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the out-of-line function thread_group_cputime_alloc_smp() to allocate and fill in the per-cpu structures and fields. The thread_group_cputime_free() function, also a no-op for UP, in SMP frees the per-cpu structures. The thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls thread_group_cputime_alloc() if the per-cpu structures haven't yet been allocated. The thread_group_cputime() function fills the task_cputime structure it is passed with the contents of the thread_group_cputime fields; in UP it's that simple but in SMP it must also safely check that tsk->signal is non-NULL (if it is it just uses the appropriate fields of task_struct) and, if so, sums the per-cpu values for each online CPU. Finally, the three functions account_group_user_time(), account_group_system_time() and account_group_exec_runtime() are used by timer functions to update the respective fields of the thread_group_cputime structure.
Non-SMP operation is trivial and will not be mentioned further.
The per-cpu structure is always allocated when a task creates its first new thread, via a call to thread_group_cputime_clone_thread() from copy_signal(). It is freed at process exit via a call to thread_group_cputime_free() from cleanup_signal().
All functions that formerly summed utime/stime/sum_sched_runtime values from from all threads in the thread group now use thread_group_cputime() to snapshot the values in the thread_group_cputime structure or the values in the task structure itself if the per-cpu structure hasn't been allocated.
Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit. The run_posix_cpu_timers() function has been split into a fast path and a slow path; the former safely checks whether there are any expired thread timers and, if not, just returns, while the slow path does the heavy lifting. With the dedicated thread group fields, timers are no longer "rebalanced" and the process_timer_rebalance() function and related code has gone away. All summing loops are gone and all code that used them now uses the thread_group_cputime() inline. When process-wide timers are set, the new task_cputime structure in signal_struct is used to cache the earliest expiration; this is checked in the fast path.
Performance
The fix appears not to add significant overhead to existing operations. It generally performs the same as the current code except in two cases, one in which it performs slightly worse (Case 5 below) and one in which it performs very significantly better (Case 2 below). Overall it's a wash except in those two cases.
I've since done somewhat more involved testing on a dual-core Opteron system.
Case 1: With no itimer running, for a test with 100,000 threads, the fixed
kernel took 1428.5 seconds, 513 seconds more than the unfixed system, all of which was spent in the system. There were twice as many voluntary context switches with the fix as without it.
Case 2: With an itimer running at .01 second ticks and 4000 threads (the most
an unmodified kernel can handle), the fixed kernel ran the test in eight percent of the time (5.8 seconds as opposed to 70 seconds) and had better tick accuracy (.012 seconds per tick as opposed to .023 seconds per tick).
Case 3: A 4000-thread test with an initial timer tick of .01 second and an
interval of 10,000 seconds (i.e. a timer that ticks only once) had very nearly the same performance in both cases: 6.3 seconds elapsed for the fixed kernel versus 5.5 seconds for the unfixed kernel.
With fewer threads (eight in these tests), the Case 1 test ran in essentially the same time on both the modified and unmodified kernels (5.2 seconds versus 5.8 seconds). The Case 2 test ran in about the same time as well, 5.9 seconds versus 5.4 seconds but again with much better tick accuracy, .013 seconds per tick versus .025 seconds per tick for the unmodified kernel.
Since the fix affected the rlimit code, I also tested soft and hard CPU limits.
Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer
running), the modified kernel was very slightly favored in that while it killed the process in 19.997 seconds of CPU time (5.002 seconds of wall time), only .003 seconds of that was system time, the rest was user time. The unmodified kernel killed the process in 20.001 seconds of CPU (5.014 seconds of wall time) of which .016 seconds was system time. Really, though, the results were too close to call. The results were essentially the same with no itimer running.
Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds
(where the hard limit would never be reached) and an itimer running, the modified kernel exhibited worse tick accuracy than the unmodified
kernel: .050 seconds/tick versus .028 seconds/tick. Otherwise, performance was almost indistinguishable. With no itimer running this test exhibited virtually identical behavior and times in both cases.
In times past I did some limited performance testing. those results are below.
On a four-cpu Opteron system without this fix, a sixteen-thread test executed in 3569.991 seconds, of which user was 3568.435s and system was 1.556s. On the same system with the fix, user and elapsed time were about the same, but system time dropped to 0.007 seconds. Performance with eight, four and one thread were comparable. Interestingly, the timer ticks with the fix seemed more accurate: The sixteen-thread test with the fix received 149543 ticks for 0.024 seconds per tick, while the same test without the fix received 58720 for 0.061 seconds per tick. Both cases were configured for an interval of 0.01 seconds. Again, the other tests were comparable. Each thread in this test computed the primes up to 25,000,000.
I also did a test with a large number of threads, 100,000 threads, which is impossible without the fix. In this case each thread computed the primes only up to 10,000 (to make the runtime manageable). System time dominated, at 1546.968 seconds out of a total 2176.906 seconds (giving a user time of 629.938s). It received 147651 ticks for 0.015 seconds per tick, still quite accurate. There is obviously no comparable test without the fix.
---
fs/binfmt_elf.c | 19 - fs/proc/array.c | 8 include/linux/posix-timers.h | 2 include/linux/sched.h | 253 ++++++++++++++++- include/linux/time.h | 3 kernel/compat.c | 53 --- kernel/exit.c | 19 - kernel/fork.c | 88 +++--- kernel/itimer.c | 33 -- kernel/posix-cpu-timers.c | 471 +++++++++++++++++---------------- kernel/sched.c | 53 +++ kernel/sched_fair.c | 1 kernel/sched_rt.c | 4 kernel/signal.c | 8 kernel/sys.c | 75 +---- security/selinux/hooks.c | 1 16 files changed, 673 insertions(+), 418 deletions(-)
fs/binfmt_elf.c renamed from fs/binfmt_elf.c~fix-itimer-many-thread-hang +7 -12
@@ -1333,20 +1333,15 @@ static void fill_prstatus(struct elf_prs prstatus->pr_pgrp =task_pgrp_vnr (p); prstatus->pr_sid =task_session_vnr (p);if (thread_group_leader (p)) { +struct task_cputime cputime; +/* -* This is the record for the group leader. Add in the -* cumulative times of previous dead threads. This total -* won't include the time of each live thread whose state -* is included in the core dump. The final total reported -* to our parent process when it calls wait4 will include -* those sums as well as the little bit more time it takes -* this and each other thread to finish dying after the -* core dump synchronization phase. +* This is the record for the group leader. It shows the +* group-wide total, not its individual thread total. */ -cputime_to_timeval (cputime_add (p->utime, p->signal->utime), - &prstatus->pr_utime); -cputime_to_timeval (cputime_add (p->stime, p->signal->stime), - &prstatus->pr_stime); +thread_group_cputime (p, &cputime); +cputime_to_timeval (cputime.utime, &prstatus->pr_utime); +cputime_to_timeval (cputime.stime, &prstatus->pr_stime); }else {cputime_to_timeval (p->utime, &prstatus->pr_utime);cputime_to_timeval (p->stime, &prstatus->pr_stime);
fs/proc/array.c renamed from fs/proc/array.c~fix-itimer-many-thread-hang +4 -4
@@ -407,20 +407,20 @@ static int do_task_stat(struct seq_file/* add up live thread stats at the group level */ if (whole) { +struct task_cputime cputime;struct task_struct *t = task;do { min_flt += t->min_flt; maj_flt += t->maj_flt; - utime =cputime_add (utime,task_utime (t)); - stime =cputime_add (stime,task_stime (t)); gtime =cputime_add (gtime,task_gtime (t)); t =next_thread (t); }while (t != task); min_flt += sig->min_flt; maj_flt += sig->maj_flt; - utime =cputime_add (utime, sig->utime); - stime =cputime_add (stime, sig->stime); +thread_group_cputime (task, &cputime); + utime = cputime.utime; + stime = cputime.stime; gtime =cputime_add (gtime, sig->gtime); }
include/linux/posix-timers.h renamed from include/linux/posix-timers.h~fix-itimer-many-thread-hang +2 -0
@@ -113,4 +113,6 @@ void set_process_cpu_timer(struct task_slong clock_nanosleep_restart (struct restart_block *restart_block); +void update_rlimit_cpu (unsigned long rlim_new); +#endif
include/linux/sched.h renamed from include/linux/sched.h~fix-itimer-many-thread-hang +242 -11
295 lines not on this page · raw message
include/linux/time.h renamed from include/linux/time.h~fix-itimer-many-thread-hang +3 -0
@@ -126,6 +126,9 @@ extern int timekeeping_valid_for_hres(voextern void update_wall_time (void );extern void update_xtime_cache (u64 nsec); +struct tms ; +extern void do_sys_times (struct tms *); +/** * timespec_to_ns - Convert timespec to nanoseconds * @ts: pointer to the timespec variable to be converted
kernel/compat.c renamed from kernel/compat.c~fix-itimer-many-thread-hang +14 -39
69 lines not on this page · raw message
kernel/exit.c renamed from kernel/exit.c~fix-itimer-many-thread-hang +10 -9
@@ -115,8 +115,6 @@ static void __exit_signal(struct task_st* We won't ever get here for the group leader, since it * will have been the last reference on the signal_struct. */ - sig->utime =cputime_add (sig->utime,task_utime (tsk)); - sig->stime =cputime_add (sig->stime,task_stime (tsk)); sig->gtime =cputime_add (sig->gtime,task_gtime (tsk)); sig->min_flt += tsk->min_flt; sig->maj_flt += tsk->maj_flt;
@@ -125,7 +123,6 @@ static void __exit_signal(struct task_st sig->inblock +=task_io_get_inblock (tsk); sig->oublock +=task_io_get_oublock (tsk);task_io_accounting_add (&sig->ioac, &tsk->ioac); - sig->sum_sched_runtime += tsk->se.sum_exec_runtime; sig =NULL ;/* Marker for below. */ }
@@ -1301,6 +1298,7 @@ static int wait_task_zombie(struct task_if (likely (!traced)) {struct signal_struct *psig;struct signal_struct *sig; +struct task_cputime cputime;/* * The resource counters for the group leader are in its
@@ -1316,20 +1314,23 @@ static int wait_task_zombie(struct task_* need to protect the access to p->parent->signal fields, * as other threads in the parent group can be right * here reaping other children at the same time. +* +* We use thread_group_cputime() to get times for the thread +* group, which consolidates times for all threads in the +* group including the group leader. */ spin_lock_irq (&p->parent->sighand->siglock); psig = p->parent->signal; sig = p->signal; +thread_group_cputime (p, &cputime); psig->cutime =cputime_add (psig->cutime, -cputime_add (p->utime, -cputime_add (sig->utime, - sig->cutime))); +cputime_add (cputime.utime, + sig->cutime)); psig->cstime =cputime_add (psig->cstime, -cputime_add (p->stime, -cputime_add (sig->stime, - sig->cstime))); +cputime_add (cputime.stime, + sig->cstime)); psig->cgtime = cputime_add(psig->cgtime, cputime_add(p->gtime,
kernel/fork.c renamed from kernel/fork.c~fix-itimer-many-thread-hang +49 -39
145 lines not on this page · raw message
kernel/itimer.c renamed from kernel/itimer.c~fix-itimer-many-thread-hang +10 -23
@@ -55,17 +55,15 @@ int do_getitimer(int which, struct itimespin_unlock_irq (&tsk->sighand->siglock);break ;case ITIMER_VIRTUAL : -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_virt_expires; cinterval = tsk->signal->it_virt_incr;if (!cputime_eq (cval, cputime_zero)) { -struct task_struct *t = tsk; -cputime_t utime = tsk->signal->utime; -do { - utime =cputime_add (utime, t->utime); - t =next_thread (t); - }while (t != tsk); +struct task_cputime cputime; +cputime_t utime; + +thread_group_cputime (tsk, &cputime); + utime = cputime.utime;if (cputime_le (cval, utime)) {/* about to fire */ cval =jiffies_to_cputime (1 ); }else {
@@ -73,25 +71,19 @@ int do_getitimer(int which, struct itime } }spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);cputime_to_timeval (cval, &value->it_value);cputime_to_timeval (cinterval, &value->it_interval);break ;case ITIMER_PROF : -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_prof_expires; cinterval = tsk->signal->it_prof_incr;if (!cputime_eq (cval, cputime_zero)) { -struct task_struct *t = tsk; -cputime_t ptime =cputime_add (tsk->signal->utime, - tsk->signal->stime); -do { - ptime =cputime_add (ptime, -cputime_add (t->utime, - t->stime)); - t =next_thread (t); - }while (t != tsk); +struct task_cputime times; +cputime_t ptime; + +thread_group_cputime (tsk, ×); + ptime =cputime_add (times.utime, times.stime);if (cputime_le (cval, ptime)) {/* about to fire */ cval =jiffies_to_cputime (1 ); }else {
@@ -99,7 +91,6 @@ int do_getitimer(int which, struct itime } }spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);cputime_to_timeval (cval, &value->it_value);cputime_to_timeval (cinterval, &value->it_interval);break ;
@@ -185,7 +176,6 @@ again:case ITIMER_VIRTUAL : nval =timeval_to_cputime (&value->it_value); ninterval =timeval_to_cputime (&value->it_interval); -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_virt_expires; cinterval = tsk->signal->it_virt_incr;
@@ -200,7 +190,6 @@ again: tsk->signal->it_virt_expires = nval; tsk->signal->it_virt_incr = ninterval;spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);if (ovalue) {cputime_to_timeval (cval, &ovalue->it_value);cputime_to_timeval (cinterval, &ovalue->it_interval);
@@ -209,7 +198,6 @@ again:case ITIMER_PROF : nval =timeval_to_cputime (&value->it_value); ninterval =timeval_to_cputime (&value->it_interval); -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_prof_expires; cinterval = tsk->signal->it_prof_incr;
@@ -224,7 +212,6 @@ again: tsk->signal->it_prof_expires = nval; tsk->signal->it_prof_incr = ninterval;spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);if (ovalue) {cputime_to_timeval (cval, &ovalue->it_value);cputime_to_timeval (cinterval, &ovalue->it_interval);
kernel/posix-cpu-timers.c renamed from kernel/posix-cpu-timers.c~fix-itimer-many-thread-hang +252 -219
630 lines not on this page · raw message
kernel/sched.c renamed from kernel/sched.c~fix-itimer-many-thread-hang +45 -8
92 lines not on this page · raw message
kernel/sched_fair.c renamed from kernel/sched_fair.c~fix-itimer-many-thread-hang +1 -0
@@ -507,6 +507,7 @@ static void update_curr(struct cfs_rq *cstruct task_struct *curtask =task_of (curr);cpuacct_charge (curtask, delta_exec); +account_group_exec_runtime (curtask, delta_exec); } }
kernel/sched_rt.c renamed from kernel/sched_rt.c~fix-itimer-many-thread-hang +3 -1
@@ -483,6 +483,8 @@ static void update_curr_rt(struct rq *rqschedstat_set (curr->se.exec_max,max (curr->se.exec_max, delta_exec)); curr->se.sum_exec_runtime += delta_exec; +account_group_exec_runtime (curr, delta_exec); + curr->se.exec_start = rq->clock;cpuacct_charge (curr, delta_exec);
@@ -1415,7 +1417,7 @@ static void watchdog(struct rq *rq, stru p->rt.timeout++; next =DIV_ROUND_UP (min (soft, hard),USEC_PER_SEC /HZ );if (p->rt.timeout > next) - p->it_sched_expires = p->se.sum_exec_runtime; + p->cputime_expires.sched_exp = p->se.sum_exec_runtime; } }
kernel/signal.c renamed from kernel/signal.c~fix-itimer-many-thread-hang +4 -4
@@ -1361,6 +1361,7 @@ int do_notify_parent(struct task_structstruct siginfo info;unsigned long flags;struct sighand_struct *psig; +struct task_cputime cputime;int ret = sig;BUG_ON (sig ==-1 );
@@ -1390,10 +1391,9 @@ int do_notify_parent(struct task_struct info.si_uid =__task_cred (tsk)->uid;rcu_read_unlock (); - info.si_utime =cputime_to_clock_t (cputime_add (tsk->utime, - tsk->signal->utime)); - info.si_stime =cputime_to_clock_t (cputime_add (tsk->stime, - tsk->signal->stime)); +thread_group_cputime (tsk, &cputime); + info.si_utime =cputime_to_jiffies (cputime.utime); + info.si_stime =cputime_to_jiffies (cputime.stime); info.si_status = tsk->exit_code &0x7f ;if (tsk->exit_code &0x80 )
kernel/sys.c renamed from kernel/sys.c~fix-itimer-many-thread-hang +26 -49
127 lines not on this page · raw message
security/selinux/hooks.c renamed from security/selinux/hooks.c~fix-itimer-many-thread-hang +1 -0
@@ -75,6 +75,7 @@#include <linux/string.h> #include <linux/selinux.h> #include <linux/mutex.h> +#include <linux/posix-timers.h> #include "avc.h" #include "objsec.h"
_
Quoted 7 lines · Frank Mayhar
This is a resubmission of the posix timer rework patch, posted a few days ago. This addresses Oleg Nesterov's comments, removing the RCU stuff from the patch and un-inlining the
thread_group_cputime()function for SMP. I left the function itself as an inline defined insched.hbut the SMP version just callsthread_group_cputime_smp()which is defined inposix-cpu-timers.c. (The UP version was a one-liner; I left it as an inline.)
i've applied it to tip/timers/posixtimers for more testing, thanks Frank.
Ingo
PATCH 1/1 timers: fix itimer/many thread hang, fix
applied the small build fix below to tip/timers/posixtimers.
Ingo
------------>
Quoted 1 line
From
430b5294bd72c085c730e1e4b86580f164d976bfMon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sun, 14 Sep 2008 16:33:01 +0200
Subject: [PATCH] timers: fix itimer/many thread hang, fix
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
fix:
kernel/fork.c:843: error: ‘struct signal_struct’ has no member named ‘sum_sched_runtime’ kernel/irq/handle.c:117: warning: ‘sparse_irq_lock’ defined but not used
--- kernel/fork.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
kernel/fork.c +0 -1
@@ -834,7 +834,6 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt =0 ; sig->inblock = sig->oublock = sig->cinblock = sig->coublock =0 ;task_io_accounting_init (&sig->ioac); - sig->sum_sched_runtime =0 ;INIT_LIST_HEAD (&sig->cpu_timers[0 ]);INIT_LIST_HEAD (&sig->cpu_timers[1 ]);INIT_LIST_HEAD (&sig->cpu_timers[2 ]);
the patch wasnt built on UP i guess - see the fix below.
the wider question is, shouldnt the UP case be just the same as the SMP case? Especially the type assymetry struct thread_group_cputime looks ugly. (and assymetries like that tend to be a constant source of breakage like the one below.)
Ingo
-------------->
Quoted 1 line
From
0a8eaa4f9b58759595a1bfe13a1295fdc25ba026Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sun, 14 Sep 2008 17:03:52 +0200
Subject: [PATCH] timers: fix itimer/many thread hang, fix #2
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
fix the UP build:
In file included from arch/x86/kernel/asm-offsets_32.c:9,
from arch/x86/kernel/asm-offsets.c:3:
include/linux/sched.h: In function ‘thread_group_cputime_clone_thread’:include/linux/sched.h:2272: warning: no return statement in function returning non-void include/linux/sched.h: In function ‘thread_group_cputime_account_user’:include/linux/sched.h:2284: error: invalid type argument of ‘->’ (have ‘struct task_cputime’) include/linux/sched.h:2284: error: invalid type argument of ‘->’ (have ‘struct task_cputime’) include/linux/sched.h: In function ‘thread_group_cputime_account_system’:include/linux/sched.h:2291: error: invalid type argument of ‘->’ (have ‘struct task_cputime’) include/linux/sched.h:2291: error: invalid type argument of ‘->’ (have ‘struct task_cputime’) include/linux/sched.h: In function ‘thread_group_cputime_account_exec_runtime’:include/linux/sched.h:2298: error: invalid type argument of ‘->’ (have ‘struct task_cputime’) distcc[14501] ERROR: compile arch/x86/kernel/asm-offsets.c on a/30 failed make[1]: *** [arch/x86/kernel/asm-offsets.s] Error 1
--- include/linux/sched.h | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-)
include/linux/sched.h +4 -3
@@ -2251,6 +2251,7 @@ static inline void thread_group_cputime_free(struct signal_struct *sig)static inline int thread_group_cputime_clone_thread (struct task_struct *curr,struct task_struct *tsk) { +return 0 ; } static inline void thread_group_cputime(struct task_struct *tsk,
@@ -2263,21 +2264,21 @@ static inline void thread_group_cputime_account_user( struct thread_group_cputime *tgtimes, cputime_t cputime) { - tgtimes->totals->utime =cputime_add (tgtimes->totals->utime, cputime); + tgtimes->totals.utime =cputime_add (tgtimes->totals.utime, cputime); }static inline void thread_group_cputime_account_system (struct thread_group_cputime *tgtimes,cputime_t cputime) { - tgtimes->totals->stime =cputime_add (tgtimes->totals->stime, cputime); + tgtimes->totals.stime =cputime_add (tgtimes->totals.stime, cputime); }static inline void thread_group_cputime_account_exec_runtime (struct thread_group_cputime *tgtimes,unsigned long long ns) { - tgtimes->totals->sum_exec_runtime += ns; + tgtimes->totals.sum_exec_runtime += ns; }#endif /* CONFIG_SMP */
Quoted 1 line · Ingo Molnar
the patch wasnt built on UP i guess - see the fix below.
Yeah, I've been focusing so much on getting the SMP case right that I've been neglecting UP a bit.
Quoted 4 lines
the wider question is, shouldnt the UP case be just the same as the SMP case? Especially the type assymetry struct
thread_group_cputimelooks ugly. (and assymetries like that tend to be a constant source of breakage like the one below.)
I'm not overly fond of this one, either; I did it at Roland's suggestion (it's all _his_ fault, yeah, _that's_ the ticket! :-); his opinion IIRC was that the UP case will perform better without the extra pointer dereferences. I agree that it's a potential source of pain such as the one you point out.
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Quoted 10 lines · Frank Mayhar
Quoted 4 lines
the wider question is, shouldnt the UP case be just the same as the SMP case? Especially the type assymetry struct
thread_group_cputimelooks ugly. (and assymetries like that tend to be a constant source of breakage like the one below.)I'm not overly fond of this one, either; I did it at Roland's suggestion (it's all _his_ fault, yeah, _that's_ the ticket! :-); his opinion IIRC was that the UP case will perform better without the extra pointer dereferences. I agree that it's a potential source of pain such as the one you point out.
i dont know ...
lets try that simplification as a delta patch, ok? Please check the before/after size of 'vmlinux' in a 'make defconfig' [with SMP disabled after make defconfig] UP build. If there's visible size difference then Roland's point holds.
Ingo
Quoted 13 lines · Ingo Molnar
Quoted 10 lines · Frank Mayhar
Quoted 4 lines
the wider question is, shouldnt the UP case be just the same as the SMP case? Especially the type assymetry struct
thread_group_cputimelooks ugly. (and assymetries like that tend to be a constant source of breakage like the one below.)I'm not overly fond of this one, either; I did it at Roland's suggestion (it's all _his_ fault, yeah, _that's_ the ticket! :-); his opinion IIRC was that the UP case will perform better without the extra pointer dereferences. I agree that it's a potential source of pain such as the one you point out.
Quoted 6 lines
i dont know ...
lets try that simplification as a delta patch, ok? Please check the before/after size of 'vmlinux' in a 'make defconfig' [with SMP disabled after make defconfig] UP build. If there's visible size difference then Roland's point holds.
I finally finished this. Yeah, there's a visible size difference, although it's small:
bobble ~/build/linux-2.6>size vmlinux
text data bss dec hex filename
6417840 824160 578416 7820416 775480 vmlinux
bobble ~/build/up-simplify-tree>size vmlinux
text data bss dec hex filename
6417999 824160 578416 7820575 77551f vmlinux
For a difference of 159 bytes. Not big, but nonzero. The delta patch (relative to a tree containing all suggested changes _except_ this simplification) follows:
include/linux/sched.h renamed from linux-2.6/include/linux/sched.h +8 -28
@@ -454,15 +454,9 @@ struct task_cputime {* This structure contains the version of task_cputime, above, that is * used for thread group CPU clock calculations. */ -#ifdef CONFIG_SMP struct thread_group_cputime {struct task_cputime *totals; }; -#else -struct thread_group_cputime { -struct task_cputime totals; -}; -#endif /* * NOTE! "signal_struct" does not have it's own
@@ -2124,10 +2118,8 @@ static inline int spin_needbreak(spinloc/* * Thread group CPU time accounting. */ -#ifdef CONFIG_SMP -extern int thread_group_cputime_alloc_smp (struct task_struct *); -extern void thread_group_cputime_smp (struct task_struct *,struct task_cputime *); +extern int thread_group_cputime_alloc (struct task_struct *);static inline void thread_group_cputime_init (struct signal_struct *sig) {
@@ -2138,9 +2130,13 @@ static inline int thread_group_cputime_c {if (curr->signal->cputime.totals)return 0 ; -return thread_group_cputime_alloc_smp (curr); +return thread_group_cputime_alloc (curr); } +#ifdef CONFIG_SMP + +extern void thread_group_cputime_smp (struct task_struct *,struct task_cputime *); +static inline void thread_group_cputime_free (struct signal_struct *sig) {free_percpu (sig->cputime.totals);
@@ -2161,31 +2157,15 @@ static inline void thread_group_cputime(#else /* CONFIG_SMP */ -static inline void thread_group_cputime_init (struct signal_struct *sig) -{ - sig->cputime.totals.utime = cputime_zero; - sig->cputime.totals.stime = cputime_zero; - sig->cputime.totals.sum_exec_runtime =0 ; -} - -static inline int thread_group_cputime_alloc (struct task_struct *tsk) -{ -return 0 ; -} -static inline void thread_group_cputime_free (struct signal_struct *sig) { -} - -static inline int thread_group_cputime_clone_thread (struct task_struct *curr) -{ -return 0 ; +kfree (sig->cputime.totals); }static inline void thread_group_cputime (struct task_struct *tsk,struct task_cputime *cputime) { - *cputime = tsk->signal->cputime.totals; + *cputime = *(tsk->signal->cputime.totals); }#endif /* CONFIG_SMP */
kernel/posix-cpu-timers.c renamed from linux-2.6/kernel/posix-cpu-timers.c +35 -1
@@ -16,7 +16,7 @@* via thread_group_cputime_clone_thread() when adding a second or subsequent * thread to a thread group. Assumes interrupts are enabled when called. */ -int thread_group_cputime_alloc_smp (struct task_struct *tsk) +int thread_group_cputime_alloc (struct task_struct *tsk) {struct signal_struct *sig = tsk->signal;struct task_cputime *cputime;
@@ -80,6 +80,40 @@ void thread_group_cputime_smp( } } +#else /* CONFIG_SMP */ + +/* +* Allocate the thread_group_cputime structure appropriately for UP kernels +* and fill in the current values of the fields. Called from copy_signal() +* via thread_group_cputime_clone_thread() when adding a second or subsequent +* thread to a thread group. Assumes interrupts are enabled when called. +*/ +int thread_group_cputime_alloc (struct task_struct *tsk) +{ +struct signal_struct *sig = tsk->signal; +struct task_cputime *cputime; + +/* +* If we have multiple threads and we don't already have a +* per-CPU task_cputime struct (checked in the caller), allocate +* one and fill it in with the times accumulated so far. We're +* UP but we may have slept in kmalloc so doublecheck to see if +* another thread got in before us. +*/ + cputime =kmalloc (sizeof (struct task_cputime ),GFP_KERNEL ); +if (cputime ==NULL ) +return -ENOMEM ; +if (sig->cputime.totals) { +kfree (cputime); +return 0 ; + } + sig->cputime.totals = cputime; + cputime->utime = tsk->utime; + cputime->stime = tsk->stime; + cputime->sum_exec_runtime = tsk->se.sum_exec_runtime; +return 0 ; +} +#endif /* CONFIG_SMP */ /*
kernel/sched_stats.h renamed from linux-2.6/kernel/sched_stats.h +3 -3
@@ -354,21 +354,21 @@ static inline void thread_group_cputime_ struct thread_group_cputime *tgtimes, cputime_t cputime) { - tgtimes->totals.utime =cputime_add (tgtimes->totals.utime, cputime); + tgtimes->totals->utime =cputime_add (tgtimes->totals->utime, cputime); }static inline void thread_group_cputime_account_system (struct thread_group_cputime *tgtimes,cputime_t cputime) { - tgtimes->totals.stime =cputime_add (tgtimes->totals.stime, cputime); + tgtimes->totals->stime =cputime_add (tgtimes->totals->stime, cputime); }static inline void thread_group_cputime_account_exec_runtime (struct thread_group_cputime *tgtimes,unsigned long long ns) { - tgtimes->totals.sum_exec_runtime += ns; + tgtimes->totals->sum_exec_runtime += ns; }#endif /* CONFIG_SMP */
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
I had been thinking not so much about code size, but about the unnecessary indirection and allocation for the UP case. I'm happy to defer to Ingo on whether to worry about that.
Thanks,
Roland
Quoted 3 lines · Roland McGrath
I had been thinking not so much about code size, but about the unnecessary indirection and allocation for the UP case. I'm happy to defer to Ingo on whether to worry about that.
Yeah, I was just responding to his request for a code-size check. I'm okay either way, although making the data structures consistent between the two cases does simplify the code a bit.
The next patch is waiting on Ingo's verdict. :-)
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Quoted 7 lines · Frank Mayhar
I finally finished this. Yeah, there's a visible size difference, although it's small:
bobble ~/build/linux-2.6>size vmlinux
text data bss dec hex filename
6417840 824160 578416 7820416 775480 vmlinux
Quoted 7 lines
bobble ~/build/up-simplify-tree>size vmlinux
text data bss dec hex filename
6417999 824160 578416 7820575 77551f vmlinuxFor a difference of 159 bytes. Not big, but nonzero. The delta patch (relative to a tree containing all suggested changes _except_ this simplification) follows:
i'd not worry about those 160 bytes - getting this stuff to work fine is far more important. Details around threading seem to be one of the slowest converging technological details of Linux.
a silly question:
kernel/posix-cpu-timers.c void thread_group_cputime_smp( · line 92
Quoted 10 lines
kernel/posix-cpu-timers.c renamed from linux-2.6/kernel/posix-cpu-timers.c +10
-0+#else /* CONFIG_SMP */ + +/* +* Allocate the thread_group_cputime structure appropriately for UP kernels +* and fill in the current values of the fields. Called from copy_signal() +* via thread_group_cputime_clone_thread() when adding a second or subsequent +* thread to a thread group. Assumes interrupts are enabled when called. +*/ +int thread_group_cputime_alloc (struct task_struct *tsk) +{
why is there _any_ assymetry needed between UP and SMP? These days we just write straight code for SMP, and UP is just a single-CPU special-case of it. _Sometimes_ if it's really worth it we do some UP special cases but it's the exception, not the rule.
Ingo
Quoted 3 lines · Ingo Molnar
i'd not worry about those 160 bytes - getting this stuff to work fine is far more important. Details around threading seem to be one of the slowest converging technological details of Linux.
Okay, the next patch will have this simplification.
Quoted 17 lines
a silly question:
kernel/posix-cpu-timers.c void thread_group_cputime_smp( · line 92
Quoted 10 lines
kernel/posix-cpu-timers.c renamed from linux-2.6/kernel/posix-cpu-timers.c +10
-0+#else /* CONFIG_SMP */ + +/* +* Allocate the thread_group_cputime structure appropriately for UP kernels +* and fill in the current values of the fields. Called from copy_signal() +* via thread_group_cputime_clone_thread() when adding a second or subsequent +* thread to a thread group. Assumes interrupts are enabled when called. +*/ +int thread_group_cputime_alloc (struct task_struct *tsk) +{why is there _any_ assymetry needed between UP and SMP? These days we just write straight code for SMP, and UP is just a single-CPU special-case of it. _Sometimes_ if it's really worth it we do some UP special cases but it's the exception, not the rule.
As far as I know, I still need to handle the SMP per_cpu allocate/free differently from the UP kmalloc. I'll check again, though; if that's no longer the case, I'll fix it.
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
PATCH 1/1 Fix itimer/many thread hang.
In reply to Ingo MolnarThis is the second resubmission of the posix timer rework patch, posted a few days ago. This includes the changes from the previous resubmittion, which addressed Oleg Nesterov's comments, removing the RCU stuff from the patch and un-inlining the thread_group_cputime() function for SMP. In addition, per Ingo Molnar it simplifies the UP code, consolidating much of it with the SMP version and depending on lower-level SMP/UP handling to take care of the differences. It also cleans up some UP compile errors, moves the scheduler stats-related macros into kernel/sched_stats.h, cleans up a merge error in kernel/fork.c and has a few other minor fixes and cleanups as suggested by Oleg and Ingo. Thanks for the review, guys.
The original README follows (to keep it together with the patch itself):
Overview
This patch reworks the handling of POSIX CPU timers, including the ITIMER_PROF, ITIMER_VIRT timers and rlimit handling. It was put together with the help of Roland McGrath, the owner and original writer of this code.
The problem we ran into, and the reason for this rework, has to do with using a profiling timer in a process with a large number of threads. It appears that the performance of the old implementation of run_posix_cpu_timers() was at least O(n*3) (where "n" is the number of threads in a process) or worse. Everything is fine with an increasing number of threads until the time taken for that routine to run becomes the same as or greater than the tick time, at which point things degrade rather quickly.
This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF."
Code Changes
This rework corrects the implementation of run_posix_cpu_timers() to make it run in constant time for a particular machine. (Performance may vary between one machine and another depending upon whether the kernel is built as single- or multiprocessor and, in the latter case, depending upon the number of running processors.) To do this, at each tick we now update fields in signal_struct as well as task_struct. The run_posix_cpu_timers() function uses those fields to make its decisions.
We define a new structure, "task_cputime," to contain user, system and scheduler times and use these in appropriate places:
struct task_cputime {
cputime_t utime;
cputime_t stime;
unsigned long long sum_exec_runtime;
};This is included in the structure "thread_group_cputime," which is a new substructure of signal_struct and which varies for uniprocessor versus multiprocessor kernels. For uniprocessor kernels, it uses "task_cputime" as a simple substructure, while for multiprocessor kernels it is a pointer:
struct thread_group_cputime {
struct task_cputime totals;
};struct thread_group_cputime {
struct task_cputime *totals;
};We also add a new task_cputime substructure directly to signal_struct, to cache the earliest expiration of process-wide timers, and task_cputime also replaces the it_*_expires fields of task_struct (used for earliest expiration of thread timers). The "thread_group_cputime" structure contains process-wide timers that are updated via account_user_time() and friends. In the non-SMP case the structure is a simple aggregator; unfortunately in the SMP case that simplicity was not achievable due to cache-line contention between CPUs (in one measured case performance was actually _worse_ on a 16-cpu system than the same test on a 4-cpu system, due to this contention). For SMP, the thread_group_cputime counters are maintained as a per-cpu structure allocated using alloc_percpu(). The timer functions update only the timer field in the structure corresponding to the running CPU, obtained using per_cpu_ptr().
We define a set of inline functions in sched.h that we use to maintain the thread_group_cputime structure and hide the differences between UP and SMP implementations from the rest of the kernel. The thread_group_cputime_init() function initializes the thread_group_cputime structure for the given task. The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the out-of-line function thread_group_cputime_alloc_smp() to allocate and fill in the per-cpu structures and fields. The thread_group_cputime_free() function, also a no-op for UP, in SMP frees the per-cpu structures. The thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls thread_group_cputime_alloc() if the per-cpu structures haven't yet been allocated. The thread_group_cputime() function fills the task_cputime structure it is passed with the contents of the thread_group_cputime fields; in UP it's that simple but in SMP it must also safely check that tsk->signal is non-NULL (if it is it just uses the appropriate fields of task_struct) and, if so, sums the per-cpu values for each online CPU. Finally, the three functions account_group_user_time(), account_group_system_time() and account_group_exec_runtime() are used by timer functions to update the respective fields of the thread_group_cputime structure.
Non-SMP operation is trivial and will not be mentioned further.
The per-cpu structure is always allocated when a task creates its first new thread, via a call to thread_group_cputime_clone_thread() from copy_signal(). It is freed at process exit via a call to thread_group_cputime_free() from cleanup_signal().
All functions that formerly summed utime/stime/sum_sched_runtime values from from all threads in the thread group now use thread_group_cputime() to snapshot the values in the thread_group_cputime structure or the values in the task structure itself if the per-cpu structure hasn't been allocated.
Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit. The run_posix_cpu_timers() function has been split into a fast path and a slow path; the former safely checks whether there are any expired thread timers and, if not, just returns, while the slow path does the heavy lifting. With the dedicated thread group fields, timers are no longer "rebalanced" and the process_timer_rebalance() function and related code has gone away. All summing loops are gone and all code that used them now uses the thread_group_cputime() inline. When process-wide timers are set, the new task_cputime structure in signal_struct is used to cache the earliest expiration; this is checked in the fast path.
Performance
The fix appears not to add significant overhead to existing operations. It generally performs the same as the current code except in two cases, one in which it performs slightly worse (Case 5 below) and one in which it performs very significantly better (Case 2 below). Overall it's a wash except in those two cases.
I've since done somewhat more involved testing on a dual-core Opteron system.
Case 1: With no itimer running, for a test with 100,000 threads, the fixed
kernel took 1428.5 seconds, 513 seconds more than the unfixed system, all of which was spent in the system. There were twice as many voluntary context switches with the fix as without it.
Case 2: With an itimer running at .01 second ticks and 4000 threads (the most
an unmodified kernel can handle), the fixed kernel ran the test in eight percent of the time (5.8 seconds as opposed to 70 seconds) and had better tick accuracy (.012 seconds per tick as opposed to .023 seconds per tick).
Case 3: A 4000-thread test with an initial timer tick of .01 second and an
interval of 10,000 seconds (i.e. a timer that ticks only once) had very nearly the same performance in both cases: 6.3 seconds elapsed for the fixed kernel versus 5.5 seconds for the unfixed kernel.
With fewer threads (eight in these tests), the Case 1 test ran in essentially the same time on both the modified and unmodified kernels (5.2 seconds versus 5.8 seconds). The Case 2 test ran in about the same time as well, 5.9 seconds versus 5.4 seconds but again with much better tick accuracy, .013 seconds per tick versus .025 seconds per tick for the unmodified kernel.
Since the fix affected the rlimit code, I also tested soft and hard CPU limits.
Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer
running), the modified kernel was very slightly favored in that while it killed the process in 19.997 seconds of CPU time (5.002 seconds of wall time), only .003 seconds of that was system time, the rest was user time. The unmodified kernel killed the process in 20.001 seconds of CPU (5.014 seconds of wall time) of which .016 seconds was system time. Really, though, the results were too close to call. The results were essentially the same with no itimer running.
Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds
(where the hard limit would never be reached) and an itimer running, the modified kernel exhibited worse tick accuracy than the unmodified
kernel: .050 seconds/tick versus .028 seconds/tick. Otherwise, performance was almost indistinguishable. With no itimer running this test exhibited virtually identical behavior and times in both cases.
In times past I did some limited performance testing. those results are below.
On a four-cpu Opteron system without this fix, a sixteen-thread test executed in 3569.991 seconds, of which user was 3568.435s and system was 1.556s. On the same system with the fix, user and elapsed time were about the same, but system time dropped to 0.007 seconds. Performance with eight, four and one thread were comparable. Interestingly, the timer ticks with the fix seemed more accurate: The sixteen-thread test with the fix received 149543 ticks for 0.024 seconds per tick, while the same test without the fix received 58720 for 0.061 seconds per tick. Both cases were configured for an interval of 0.01 seconds. Again, the other tests were comparable. Each thread in this test computed the primes up to 25,000,000.
I also did a test with a large number of threads, 100,000 threads, which is impossible without the fix. In this case each thread computed the primes only up to 10,000 (to make the runtime manageable). System time dominated, at 1546.968 seconds out of a total 2176.906 seconds (giving a user time of 629.938s). It received 147651 ticks for 0.015 seconds per tick, still quite accurate. There is obviously no comparable test without the fix.
fs/binfmt_elf.c | 19 +- fs/proc/array.c | 8 +- include/linux/kernel_stat.h | 1 + include/linux/posix-timers.h | 2 + include/linux/sched.h | 85 ++++++- include/linux/time.h | 3 + kernel/compat.c | 53 ++---- kernel/exit.c | 19 +- kernel/fork.c | 92 ++++---- kernel/itimer.c | 33 +-- kernel/posix-cpu-timers.c | 512 +++++++++++++++++++++--------------------- kernel/sched.c | 20 +- kernel/sched_fair.c | 1 + kernel/sched_rt.c | 4 +- kernel/sched_stats.h | 136 +++++++++++ kernel/signal.c | 8 +- kernel/sys.c | 75 +++---- security/selinux/hooks.c | 9 +- 18 files changed, 617 insertions(+), 463 deletions(-)
fs/binfmt_elf.c +7 -12
@@ -1333,20 +1333,15 @@ static void fill_prstatus(struct elf_prstatus *prstatus, prstatus->pr_pgrp =task_pgrp_vnr (p); prstatus->pr_sid =task_session_vnr (p);if (thread_group_leader (p)) { +struct task_cputime cputime; +/* -* This is the record for the group leader. Add in the -* cumulative times of previous dead threads. This total -* won't include the time of each live thread whose state -* is included in the core dump. The final total reported -* to our parent process when it calls wait4 will include -* those sums as well as the little bit more time it takes -* this and each other thread to finish dying after the -* core dump synchronization phase. +* This is the record for the group leader. It shows the +* group-wide total, not its individual thread total. */ -cputime_to_timeval (cputime_add (p->utime, p->signal->utime), - &prstatus->pr_utime); -cputime_to_timeval (cputime_add (p->stime, p->signal->stime), - &prstatus->pr_stime); +thread_group_cputime (p, &cputime); +cputime_to_timeval (cputime.utime, &prstatus->pr_utime); +cputime_to_timeval (cputime.stime, &prstatus->pr_stime); }else {cputime_to_timeval (p->utime, &prstatus->pr_utime);cputime_to_timeval (p->stime, &prstatus->pr_stime);
fs/proc/array.c +4 -4
@@ -395,20 +395,20 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,/* add up live thread stats at the group level */ if (whole) { +struct task_cputime cputime;struct task_struct *t = task;do { min_flt += t->min_flt; maj_flt += t->maj_flt; - utime =cputime_add (utime,task_utime (t)); - stime =cputime_add (stime,task_stime (t)); gtime =cputime_add (gtime,task_gtime (t)); t =next_thread (t); }while (t != task); min_flt += sig->min_flt; maj_flt += sig->maj_flt; - utime =cputime_add (utime, sig->utime); - stime =cputime_add (stime, sig->stime); +thread_group_cputime (task, &cputime); + utime = cputime.utime; + stime = cputime.stime; gtime =cputime_add (gtime, sig->gtime); }
include/linux/kernel_stat.h +1 -0
@@ -52,6 +52,7 @@ static inline int kstat_irqs(int irq)return sum; } +extern unsigned long long task_delta_exec (struct task_struct *);extern void account_user_time (struct task_struct *,cputime_t );extern void account_user_time_scaled (struct task_struct *,cputime_t );extern void account_system_time (struct task_struct *,int ,cputime_t );
include/linux/posix-timers.h +2 -0
@@ -115,4 +115,6 @@ void set_process_cpu_timer(struct task_struct *task, unsigned int clock_idx,long clock_nanosleep_restart (struct restart_block *restart_block); +void update_rlimit_cpu (unsigned long rlim_new); +#endif
include/linux/sched.h +72 -13
133 lines not on this page · raw message
include/linux/time.h +3 -0
@@ -125,6 +125,9 @@ extern int timekeeping_valid_for_hres(void);extern void update_wall_time (void );extern void update_xtime_cache (u64 nsec); +struct tms ; +extern void do_sys_times (struct tms *); +/** * timespec_to_ns - Convert timespec to nanoseconds * @ts: pointer to the timespec variable to be converted
kernel/compat.c +14 -39
69 lines not on this page · raw message
kernel/exit.c +10 -9
@@ -112,8 +112,6 @@ static void __exit_signal(struct task_struct *tsk)* We won't ever get here for the group leader, since it * will have been the last reference on the signal_struct. */ - sig->utime =cputime_add (sig->utime,task_utime (tsk)); - sig->stime =cputime_add (sig->stime,task_stime (tsk)); sig->gtime =cputime_add (sig->gtime,task_gtime (tsk)); sig->min_flt += tsk->min_flt; sig->maj_flt += tsk->maj_flt;
@@ -122,7 +120,6 @@ static void __exit_signal(struct task_struct *tsk) sig->inblock +=task_io_get_inblock (tsk); sig->oublock +=task_io_get_oublock (tsk);task_io_accounting_add (&sig->ioac, &tsk->ioac); - sig->sum_sched_runtime += tsk->se.sum_exec_runtime; sig =NULL ;/* Marker for below. */ }
@@ -1294,6 +1291,7 @@ static int wait_task_zombie(struct task_struct *p, int options,if (likely (!traced)) {struct signal_struct *psig;struct signal_struct *sig; +struct task_cputime cputime;/* * The resource counters for the group leader are in its
@@ -1309,20 +1307,23 @@ static int wait_task_zombie(struct task_struct *p, int options,* need to protect the access to p->parent->signal fields, * as other threads in the parent group can be right * here reaping other children at the same time. +* +* We use thread_group_cputime() to get times for the thread +* group, which consolidates times for all threads in the +* group including the group leader. */ spin_lock_irq (&p->parent->sighand->siglock); psig = p->parent->signal; sig = p->signal; +thread_group_cputime (p, &cputime); psig->cutime =cputime_add (psig->cutime, -cputime_add (p->utime, -cputime_add (sig->utime, - sig->cutime))); +cputime_add (cputime.utime, + sig->cutime)); psig->cstime =cputime_add (psig->cstime, -cputime_add (p->stime, -cputime_add (sig->stime, - sig->cstime))); +cputime_add (cputime.stime, + sig->cstime)); psig->cgtime = cputime_add(psig->cgtime, cputime_add(p->gtime,
kernel/fork.c +50 -42
149 lines not on this page · raw message
kernel/itimer.c +10 -23
@@ -55,17 +55,15 @@ int do_getitimer(int which, struct itimerval *value)spin_unlock_irq (&tsk->sighand->siglock);break ;case ITIMER_VIRTUAL : -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_virt_expires; cinterval = tsk->signal->it_virt_incr;if (!cputime_eq (cval, cputime_zero)) { -struct task_struct *t = tsk; -cputime_t utime = tsk->signal->utime; -do { - utime =cputime_add (utime, t->utime); - t =next_thread (t); - }while (t != tsk); +struct task_cputime cputime; +cputime_t utime; + +thread_group_cputime (tsk, &cputime); + utime = cputime.utime;if (cputime_le (cval, utime)) {/* about to fire */ cval =jiffies_to_cputime (1 ); }else {
@@ -73,25 +71,19 @@ int do_getitimer(int which, struct itimerval *value) } }spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);cputime_to_timeval (cval, &value->it_value);cputime_to_timeval (cinterval, &value->it_interval);break ;case ITIMER_PROF : -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_prof_expires; cinterval = tsk->signal->it_prof_incr;if (!cputime_eq (cval, cputime_zero)) { -struct task_struct *t = tsk; -cputime_t ptime =cputime_add (tsk->signal->utime, - tsk->signal->stime); -do { - ptime =cputime_add (ptime, -cputime_add (t->utime, - t->stime)); - t =next_thread (t); - }while (t != tsk); +struct task_cputime times; +cputime_t ptime; + +thread_group_cputime (tsk, ×); + ptime =cputime_add (times.utime, times.stime);if (cputime_le (cval, ptime)) {/* about to fire */ cval =jiffies_to_cputime (1 ); }else {
@@ -99,7 +91,6 @@ int do_getitimer(int which, struct itimerval *value) } }spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);cputime_to_timeval (cval, &value->it_value);cputime_to_timeval (cinterval, &value->it_interval);break ;
@@ -185,7 +176,6 @@ again:case ITIMER_VIRTUAL : nval =timeval_to_cputime (&value->it_value); ninterval =timeval_to_cputime (&value->it_interval); -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_virt_expires; cinterval = tsk->signal->it_virt_incr;
@@ -200,7 +190,6 @@ again: tsk->signal->it_virt_expires = nval; tsk->signal->it_virt_incr = ninterval;spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);if (ovalue) {cputime_to_timeval (cval, &ovalue->it_value);cputime_to_timeval (cinterval, &ovalue->it_interval);
@@ -209,7 +198,6 @@ again:case ITIMER_PROF : nval =timeval_to_cputime (&value->it_value); ninterval =timeval_to_cputime (&value->it_interval); -read_lock (&tasklist_lock);spin_lock_irq (&tsk->sighand->siglock); cval = tsk->signal->it_prof_expires; cinterval = tsk->signal->it_prof_incr;
@@ -224,7 +212,6 @@ again: tsk->signal->it_prof_expires = nval; tsk->signal->it_prof_incr = ninterval;spin_unlock_irq (&tsk->sighand->siglock); -read_unlock (&tasklist_lock);if (ovalue) {cputime_to_timeval (cval, &ovalue->it_value);cputime_to_timeval (cinterval, &ovalue->it_interval);
kernel/posix-cpu-timers.c +260 -252
676 lines not on this page · raw message
kernel/sched.c +12 -8
@@ -4037,24 +4037,24 @@ DEFINE_PER_CPU(struct kernel_stat, kstat);EXPORT_PER_CPU_SYMBOL (kstat);/* -* Return p->sum_exec_runtime plus any more ns on the sched_clock -* that have not yet been banked in case the task is currently running. +* Return any ns on the sched_clock that have not yet been banked in +* @p in case that task is currently running. */ -unsigned long long task_sched_runtime (struct task_struct *p) +unsigned long long task_delta_exec (struct task_struct *p) { -unsigned long flags; -u64 ns, delta_exec;struct rq *rq; +unsigned long flags; +u64 ns =0 ; rq =task_rq_lock (p, &flags); - ns = p->se.sum_exec_runtime;if (task_current (rq, p)) { +u64 delta_exec; +update_rq_clock (rq); delta_exec = rq->clock - p->se.exec_start;if ((s64 )delta_exec >0 ) - ns += delta_exec; + ns = delta_exec; } -task_rq_unlock (rq, &flags);return ns; }
@@ -4070,6 +4070,7 @@ void account_user_time(struct task_struct *p, cputime_t cputime)cputime64_t tmp; p->utime =cputime_add (p->utime, cputime); +account_group_user_time (p, cputime);/* Add user time to cpustat. */ tmp =cputime_to_cputime64 (cputime);
@@ -4094,6 +4095,7 @@ static void account_guest_time(struct task_struct *p, cputime_t cputime) tmp =cputime_to_cputime64 (cputime); p->utime =cputime_add (p->utime, cputime); +account_group_user_time (p, cputime); p->gtime =cputime_add (p->gtime, cputime); cpustat->user =cputime64_add (cpustat->user, tmp);
@@ -4129,6 +4131,7 @@ void account_system_time(struct task_struct *p, int hardirq_offset, } p->stime =cputime_add (p->stime, cputime); +account_group_system_time (p, cputime);/* Add system time to cpustat. */ tmp =cputime_to_cputime64 (cputime);
@@ -4170,6 +4173,7 @@ void account_steal_time(struct task_struct *p, cputime_t steal)if (p == rq->idle) { p->stime =cputime_add (p->stime, steal); +account_group_system_time (p, steal);if (atomic_read (&rq->nr_iowait) >0 ) cpustat->iowait =cputime64_add (cpustat->iowait, tmp);else
kernel/sched_fair.c +1 -0
@@ -507,6 +507,7 @@ static void update_curr(struct cfs_rq *cfs_rq)struct task_struct *curtask =task_of (curr);cpuacct_charge (curtask, delta_exec); +account_group_exec_runtime (curtask, delta_exec); } }
kernel/sched_rt.c +3 -1
@@ -483,6 +483,8 @@ static void update_curr_rt(struct rq *rq)schedstat_set (curr->se.exec_max,max (curr->se.exec_max, delta_exec)); curr->se.sum_exec_runtime += delta_exec; +account_group_exec_runtime (curr, delta_exec); + curr->se.exec_start = rq->clock;cpuacct_charge (curr, delta_exec);
@@ -1412,7 +1414,7 @@ static void watchdog(struct rq *rq, struct task_struct *p) p->rt.timeout++; next =DIV_ROUND_UP (min (soft, hard),USEC_PER_SEC /HZ );if (p->rt.timeout > next) - p->it_sched_expires = p->se.sum_exec_runtime; + p->cputime_expires.sched_exp = p->se.sum_exec_runtime; } }
kernel/sched_stats.h +136 -0
139 lines not on this page · raw message
kernel/signal.c +4 -4
@@ -1338,6 +1338,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)struct siginfo info;unsigned long flags;struct sighand_struct *psig; +struct task_cputime cputime;int ret = sig;BUG_ON (sig ==-1 );
@@ -1368,10 +1369,9 @@ int do_notify_parent(struct task_struct *tsk, int sig) info.si_uid = tsk->uid; - info.si_utime =cputime_to_clock_t (cputime_add (tsk->utime, - tsk->signal->utime)); - info.si_stime =cputime_to_clock_t (cputime_add (tsk->stime, - tsk->signal->stime)); +thread_group_cputime (tsk, &cputime); + info.si_utime =cputime_to_jiffies (cputime.utime); + info.si_stime =cputime_to_jiffies (cputime.stime); info.si_status = tsk->exit_code &0x7f ;if (tsk->exit_code &0x80 )
kernel/sys.c +26 -49
127 lines not on this page · raw message
security/selinux/hooks.c +2 -7
@@ -75,6 +75,7 @@#include <linux/string.h> #include <linux/selinux.h> #include <linux/mutex.h> +#include <linux/posix-timers.h> #include "avc.h" #include "objsec.h"
@@ -2321,13 +2322,7 @@ static void selinux_bprm_post_apply_creds(struct linux_binprm *bprm) initrlim = init_task.signal->rlim+i; rlim->rlim_cur =min (rlim->rlim_max, initrlim->rlim_cur); } -if (current->signal->rlim[RLIMIT_CPU ].rlim_cur !=RLIM_INFINITY ) { -/* -* This will cause RLIMIT_CPU calculations -* to be refigured. -*/ - current->it_prof_expires =jiffies_to_cputime (1 ); - } +update_rlimit_cpu (rlim->rlim_cur); }/* Wake up the parent if it is waiting so that it can
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Quoted 11 lines · Frank Mayhar
This is the second resubmission of the posix timer rework patch, posted a few days ago. This includes the changes from the previous resubmittion, which addressed Oleg Nesterov's comments, removing the RCU stuff from the patch and un-inlining the
thread_group_cputime()function for SMP. In addition, per Ingo Molnar it simplifies the UP code, consolidating much of it with the SMP version and depending on lower-level SMP/UP handling to take care of the differences. It also cleans up some UP compile errors, moves the scheduler stats-related macros intokernel/sched_stats.h, cleans up a merge error inkernel/fork.cand has a few other minor fixes and cleanups as suggested by Oleg and Ingo. Thanks for the review, guys.
below is the delta patch i've applied to tip/timers/posixtimers - might be easier to review for those who've seen v1 and who'd like to check the changes.
i've also merged v2 into tip/master and started testing it.
Ingo
---------------->
Quoted 1 line
From
bb34d92f643086d546b49cef680f6f305ed84414Mon Sep 17 00:00:00 2001
From: Frank Mayhar <[email protected]>
Date: Fri, 12 Sep 2008 09:54:39 -0700
Subject: [PATCH] timers: fix itimer/many thread hang, v2
This is the second resubmission of the posix timer rework patch, posted a few days ago.
This includes the changes from the previous resubmittion, which addressed Oleg Nesterov's comments, removing the RCU stuff from the patch and un-inlining the thread_group_cputime() function for SMP.
In addition, per Ingo Molnar it simplifies the UP code, consolidating much of it with the SMP version and depending on lower-level SMP/UP handling to take care of the differences.
It also cleans up some UP compile errors, moves the scheduler stats-related macros into kernel/sched_stats.h, cleans up a merge error in kernel/fork.c and has a few other minor fixes and cleanups as suggested by Oleg and Ingo. Thanks for the review, guys.
--- include/linux/kernel_stat.h | 1 + include/linux/sched.h | 183 +----------------------------------------- kernel/fork.c | 5 +- kernel/posix-cpu-timers.c | 155 +++++++++++++++--------------------- kernel/sched.c | 47 ++---------- kernel/sched_stats.h | 136 ++++++++++++++++++++++++++++++++ 6 files changed, 215 insertions(+), 312 deletions(-)
include/linux/kernel_stat.h +1 -0
@@ -52,6 +52,7 @@ static inline int kstat_irqs(int irq)return sum; } +extern unsigned long long task_delta_exec (struct task_struct *);extern void account_user_time (struct task_struct *,cputime_t );extern void account_user_time_scaled (struct task_struct *,cputime_t );extern void account_system_time (struct task_struct *,int ,cputime_t );
include/linux/sched.h +5 -178
213 lines not on this page · raw message
kernel/fork.c +1 -4
@@ -791,7 +791,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)int ret;if (clone_flags &CLONE_THREAD ) { - ret =thread_group_cputime_clone_thread (current, tsk); + ret =thread_group_cputime_clone_thread (current);if (likely (!ret)) {atomic_inc (¤t->signal->count);atomic_inc (¤t->signal->live);
@@ -834,9 +834,6 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt =0 ; sig->inblock = sig->oublock = sig->cinblock = sig->coublock =0 ;task_io_accounting_init (&sig->ioac); -INIT_LIST_HEAD (&sig->cpu_timers[0 ]); -INIT_LIST_HEAD (&sig->cpu_timers[1 ]); -INIT_LIST_HEAD (&sig->cpu_timers[2 ]);taskstats_tgid_init (sig);task_lock (current->group_leader);
kernel/posix-cpu-timers.c +64 -89
260 lines not on this page · raw message
kernel/sched.c +7 -40
62 lines not on this page · raw message
kernel/sched_stats.h +136 -0
139 lines not on this page · raw message
Quoted 22 lines · Ingo Molnar
Quoted 11 lines · Frank Mayhar
This is the second resubmission of the posix timer rework patch, posted a few days ago. This includes the changes from the previous resubmittion, which addressed Oleg Nesterov's comments, removing the RCU stuff from the patch and un-inlining the
thread_group_cputime()function for SMP. In addition, per Ingo Molnar it simplifies the UP code, consolidating much of it with the SMP version and depending on lower-level SMP/UP handling to take care of the differences. It also cleans up some UP compile errors, moves the scheduler stats-related macros intokernel/sched_stats.h, cleans up a merge error inkernel/fork.cand has a few other minor fixes and cleanups as suggested by Oleg and Ingo. Thanks for the review, guys.below is the delta patch i've applied to tip/timers/posixtimers - might be easier to review for those who've seen v1 and who'd like to check the changes.
i've also merged v2 into tip/master and started testing it.
Ingo
Quoted 8 lines
---------------->
Frombb34d92f643086d546b49cef680f6f305ed84414Mon Sep 17 00:00:00 2001
From: Frank Mayhar <[email protected]>
Date: Fri, 12 Sep 2008 09:54:39 -0700
Subject: [PATCH] timers: fix itimer/many thread hang, v2This is the second resubmission of the posix timer rework patch, posted a few days ago.
-tip testing found a boot crash on a 32-bit x86 test system, and i've bisected it down to this commit. I've attached the .config. The box is hard to debug and the crash happens very early so there's no log - but it was reproducible so you should be able to trigger it by doing this in the tip tree:
git checkout 788222bf3d6d7ee08ce308f078c8774eb896c59e
[ that is the -tip tree just before the revert commit. ]
... and use the attached .config to build a test kernel and to reproduce the crash. (it doesnt matter if it wont fully boot on your testbox - the crash happen very early)
here is how you can access the tree:
http://people.redhat.com/mingo/tip.git/README
i also found a boot hang on a 64-bit x86 test system - that too is solved with this revert. I've attached that config too.
The common theme in both configs is that they are !SMP - and many updates in v2 relate to !SMP details, so i'd suspect a bug in that area.
( and thanks to working with delta patches i was able to fall back to
the v1+fixes state in tip/timers/posix-timers, instead of having to drop/revert the whole work. So please update this stuff with delta patches in the future. )
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.27-rc7
# Tue Sep 23 14:38:51 2008
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=yCONFIG_KTIME_SCALAR=yCONFIG_BOOTPARAM_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not setCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not setCONFIG_IKCONFIG=mCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not setCONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not setCONFIG_BOOTPARAM_MAXCPUS_1=yCONFIG_BOOTPARAM_NOSMP=yCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not setCONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not setCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=y
# CONFIG_PID_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_FASTBOOT=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_COMPAT_BRK=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=y
# CONFIG_OPROFILE is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
# CONFIG_HAVE_CLK is not setCONFIG_HAVE_DYN_ARRAY=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_BLOCK=y
# CONFIG_LBD is not setCONFIG_BLK_DEV_IO_TRACE=yCONFIG_LSF=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=m
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_BOOTPARAM_NO_HZ_OFF=y
# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_BOOTPARAM_HIGHRES_OFF=y
# CONFIG_SMP is not setCONFIG_HAVE_SPARSE_IRQ=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=yCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_PARAVIRT_GUEST=y CONFIG_XEN_SAVE_RESTORE=yCONFIG_VMI=yCONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=yCONFIG_LGUEST_GUEST=yCONFIG_PARAVIRT=yCONFIG_PARAVIRT_CLOCK=yCONFIG_PARAVIRT_DEBUG=yCONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not setCONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set CONFIG_X86_GENERIC=yCONFIG_X86_CPU=yCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_X86_XADD=yCONFIG_X86_PPRO_FENCE=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_CYRIX_32=yCONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR_32 is not set CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=yCONFIG_X86_DS=y
# CONFIG_X86_PTRACE_BTS is not set CONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=yCONFIG_VM86=yCONFIG_TOSHIBA=yCONFIG_I8K=yCONFIG_X86_REBOOTFIXUPS=yCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not setCONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y
# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HIGHPTE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set # CONFIG_X86_RESERVE_LOW_64K is not set CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not setCONFIG_EFI=yCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not setCONFIG_KEXEC=yCONFIG_CRASH_DUMP=yCONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x100000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#CONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not setCONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not setCONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not setCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not setCONFIG_ACPI_DOCK=yCONFIG_ACPI_BAY=yCONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_THERMAL is not setCONFIG_ACPI_WMI=yCONFIG_ACPI_ASUS=yCONFIG_ACPI_TOSHIBA=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=yCONFIG_ACPI_DEBUG_FUNC_TRACE=yCONFIG_ACPI_EC=yCONFIG_ACPI_PCI_SLOT=mCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=mCONFIG_ACPI_SBS=y
# CONFIG_APM is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not setCONFIG_X86_POWERNOW_K6=yCONFIG_X86_POWERNOW_K7=yCONFIG_X86_POWERNOW_K7_ACPI=yCONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_POWERNOW_K8_ACPI is not setCONFIG_X86_GX_SUSPMOD=mCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=yCONFIG_X86_SPEEDSTEP_ICH=mCONFIG_X86_SPEEDSTEP_SMI=mCONFIG_X86_P4_CLOCKMOD=mCONFIG_X86_CPUFREQ_NFORCE2=mCONFIG_X86_LONGRUN=yCONFIG_X86_LONGHAUL=y
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y # CONFIG_CPU_IDLE is not set CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_0=y # CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_1 is not set CONFIG_BOOTPARAM_NOAPIC=y # CONFIG_BOOTPARAM_NOLAPIC is not set # CONFIG_BOOTPARAM_NOLAPIC_TIMER is not set CONFIG_BOOTPARAM_LAPIC=y CONFIG_BOOTPARAM_HPET_DISABLE=y CONFIG_BOOTPARAM_IDLE_MWAIT=y # CONFIG_BOOTPARAM_IDLE_POLL is not set CONFIG_BOOTPARAM_HIGHMEM_512M=y CONFIG_BOOTPARAM_NOPAT=y CONFIG_BOOTPARAM_NOTSC=y # CONFIG_BOOTPARAM_ACPI_OFF is not set # CONFIG_BOOTPARAM_PCI_NOACPI is not set # CONFIG_BOOTPARAM_PCI_NOMSI is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_OLPC=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=mCONFIG_PCIEAER=yCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not setCONFIG_PCI_DEBUG=yCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_ISA=yCONFIG_EISA=yCONFIG_EISA_VLB_PRIMING=yCONFIG_EISA_PCI_EISA=yCONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=mCONFIG_OLPC=yCONFIG_K8_NB=yCONFIG_PCCARD=mCONFIG_PCMCIA_DEBUG=yCONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not setCONFIG_PCMCIA_IOCTL=y
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not setCONFIG_I82365=mCONFIG_TCIC=mCONFIG_PCMCIA_PROBE=yCONFIG_PCCARD_NONSTATIC=mCONFIG_HOTPLUG_PCI=mCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_IBM=m
# CONFIG_HOTPLUG_PCI_ACPI is not setCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=mCONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=m
# CONFIG_BINFMT_MISC is not setCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not setCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not setCONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not setCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not setCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=mCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=yCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not setCONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not setCONFIG_TCP_CONG_HYBLA=yCONFIG_TCP_CONG_VEGAS=yCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=yCONFIG_TCP_CONG_VENO=yCONFIG_TCP_CONG_YEAH=yCONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not setCONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not setCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=mCONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2=mCONFIG_IP_DCCP_CCID2_DEBUG=yCONFIG_IP_DCCP_CCID3=mCONFIG_IP_DCCP_CCID3_DEBUG=yCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=mCONFIG_IP_DCCP_TFRC_DEBUG=y
#
# DCCP Kernel Hacking
#CONFIG_IP_DCCP_DEBUG=yCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not setCONFIG_ATM=yCONFIG_ATM_CLIP=mCONFIG_ATM_CLIP_NO_ICMP=yCONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
# CONFIG_ATM_BR2684 is not setCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=yCONFIG_DECNET_ROUTER=yCONFIG_LLC=yCONFIG_LLC2=y
# CONFIG_IPX is not setCONFIG_ATALK=yCONFIG_DEV_APPLETALK=m
# CONFIG_LTPC is not set
# CONFIG_IPDDP is not setCONFIG_X25=yCONFIG_LAPB=yCONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not setCONFIG_WAN_ROUTER=y
# CONFIG_NET_SCHED is not set
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=yCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=yCONFIG_ROSE=y
#
# AX.25 network device drivers
#CONFIG_MKISS=m
# CONFIG_6PACK is not setCONFIG_BPQETHER=mCONFIG_DMASCC=y
# CONFIG_SCC is not set
# CONFIG_BAYCOM_SER_FDX is not setCONFIG_BAYCOM_SER_HDX=mCONFIG_BAYCOM_PAR=mCONFIG_BAYCOM_EPP=mCONFIG_YAM=y
# CONFIG_CAN is not set
# CONFIG_IRDA is not setCONFIG_BT=y
# CONFIG_BT_L2CAP is not setCONFIG_BT_SCO=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not setCONFIG_BT_HCIBCM203X=yCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not setCONFIG_BT_HCIBT3C=mCONFIG_BT_HCIBLUECARD=m
# CONFIG_BT_HCIBTUART is not setCONFIG_BT_HCIVHCI=mCONFIG_AF_RXRPC=yCONFIG_AF_RXRPC_DEBUG=yCONFIG_RXKAD=yCONFIG_FIB_RULES=y
#
# Wireless
#CONFIG_CFG80211=y
# CONFIG_NL80211 is not setCONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not setCONFIG_MAC80211=y
#
# Rate control algorithm selection
#CONFIG_MAC80211_RC_PID=yCONFIG_MAC80211_RC_DEFAULT_PID=yCONFIG_MAC80211_RC_DEFAULT="pid"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=yCONFIG_MAC80211_DEBUG_MENU=yCONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT=y
# CONFIG_MAC80211_NOINLINE is not setCONFIG_MAC80211_VERBOSE_DEBUG=yCONFIG_MAC80211_HT_DEBUG=yCONFIG_MAC80211_TKIP_DEBUG=yCONFIG_MAC80211_IBSS_DEBUG=yCONFIG_MAC80211_VERBOSE_PS_DEBUG=yCONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
# CONFIG_MAC80211_LOWTX_FRAME_DUMP is not set
# CONFIG_MAC80211_DEBUG_COUNTERS is not setCONFIG_MAC80211_VERBOSE_SPECT_MGMT_DEBUG=y
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not setCONFIG_NET_9P=y
# CONFIG_NET_9P_VIRTIO is not setCONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_DEBUG_DRIVER=yCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_PARPORT=yCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=yCONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=m
# CONFIG_PARPORT_1284 is not setCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=yCONFIG_PNP_DEBUG=y
#
# Protocols
#CONFIG_ISAPNP=yCONFIG_PNPBIOS=yCONFIG_PNPBIOS_PROC_FS=yCONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not setCONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not setCONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not setCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not setCONFIG_BLK_DEV_HD=yCONFIG_MISC_DEVICES=yCONFIG_IBM_ASM=yCONFIG_PHANTOM=yCONFIG_EEPROM_93CX6=mCONFIG_SGI_IOC4=yCONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not setCONFIG_ACER_WMI=m
# CONFIG_FUJITSU_LAPTOP is not setCONFIG_TC1100_WMI=yCONFIG_MSI_LAPTOP=mCONFIG_COMPAL_LAPTOP=yCONFIG_SONY_LAPTOP=yCONFIG_SONYPI_COMPAT=y
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_EEEPC_LAPTOP is not setCONFIG_ENCLOSURE_SERVICES=mCONFIG_HP_ILO=yCONFIG_HAVE_IDE=y
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not setCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not setCONFIG_CHR_DEV_SCH=m
# CONFIG_SCSI_ENCLOSURE is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not setCONFIG_SCSI_AIC7XXX=yCONFIG_SCSI_LOWLEVEL_PCMCIA=yCONFIG_PCMCIA_AHA152X=m
# CONFIG_PCMCIA_FDOMAIN is not setCONFIG_PCMCIA_NINJA_SCSI=mCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=m
# CONFIG_SCSI_DH is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not setCONFIG_ATA_SFF=yCONFIG_SATA_SVW=mCONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not setCONFIG_SATA_NV=yCONFIG_PDC_ADMA=yCONFIG_SATA_QSTOR=mCONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not setCONFIG_SATA_SIL=yCONFIG_SATA_SIS=y
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not setCONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not setCONFIG_PATA_ALI=mCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=y
# CONFIG_PATA_ATIIXP is not setCONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_CMD64X is not setCONFIG_PATA_CS5520=yCONFIG_PATA_CS5530=y
# CONFIG_PATA_CS5535 is not setCONFIG_PATA_CS5536=mCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=yCONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not setCONFIG_PATA_HPT37X=yCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not setCONFIG_PATA_ISAPNP=yCONFIG_PATA_IT821X=yCONFIG_PATA_IT8213=mCONFIG_PATA_JMICRON=y
# CONFIG_PATA_LEGACY is not setCONFIG_PATA_TRIFLEX=yCONFIG_PATA_MARVELL=yCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not setCONFIG_PATA_NINJA32=yCONFIG_PATA_NS87410=m
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not setCONFIG_PATA_OPTIDMA=yCONFIG_PATA_PCMCIA=mCONFIG_PATA_PDC_OLD=mCONFIG_PATA_QDI=mCONFIG_PATA_RADISYS=mCONFIG_PATA_RZ1000=mCONFIG_PATA_SC1200=m
# CONFIG_PATA_SERVERWORKS is not setCONFIG_PATA_PDC2027X=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=yCONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not setCONFIG_PATA_SCH=m
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #CONFIG_FIREWIRE=yCONFIG_FIREWIRE_OHCI=yCONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not setCONFIG_IEEE1394=y
# CONFIG_IEEE1394_OHCI1394 is not set CONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_SBP2=yCONFIG_IEEE1394_SBP2_PHYS_DMA=y CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=yCONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_VERBOSEDEBUG is not setCONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set CONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
# CONFIG_I2O_BUS is not setCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_DUMMY=yCONFIG_BONDING=yCONFIG_MACVLAN=yCONFIG_EQUALIZER=yCONFIG_TUN=yCONFIG_VETH=mCONFIG_NET_SB1000=yCONFIG_ARCNET=mCONFIG_ARCNET_1201=mCONFIG_ARCNET_1051=m
# CONFIG_ARCNET_RAW is not set
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
# CONFIG_ARCNET_COM90xxIO is not set
# CONFIG_ARCNET_RIM_I is not setCONFIG_ARCNET_COM20020=mCONFIG_ARCNET_COM20020_ISA=m
# CONFIG_ARCNET_COM20020_PCI is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=yCONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not setCONFIG_CICADA_PHY=mCONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=yCONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=yCONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=mCONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=y
# CONFIG_CASSINI is not setCONFIG_NET_VENDOR_3COM=yCONFIG_EL1=yCONFIG_EL2=y
# CONFIG_ELPLUS is not setCONFIG_EL16=m
# CONFIG_EL3 is not setCONFIG_3C515=mCONFIG_VORTEX=yCONFIG_TYPHOON=m
# CONFIG_LANCE is not setCONFIG_NET_VENDOR_SMC=yCONFIG_ULTRA=y
# CONFIG_ULTRA32 is not set
# CONFIG_SMC9194 is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not setCONFIG_AT1700=mCONFIG_DEPCA=m
# CONFIG_HP100 is not setCONFIG_NET_ISA=yCONFIG_E2100=mCONFIG_EWRK3=y
# CONFIG_EEXPRESS is not setCONFIG_EEXPRESS_PRO=mCONFIG_HPLAN=yCONFIG_LP486E=yCONFIG_ETH16I=yCONFIG_NE2000=y
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not setCONFIG_ADAPTEC_STARFIRE=y
# CONFIG_AC3200 is not setCONFIG_APRICOT=y
# CONFIG_B44 is not setCONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_CS89x0=y
# CONFIG_EEPRO100 is not setCONFIG_E100=yCONFIG_LNE390=y
# CONFIG_FEALNX is not setCONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not setCONFIG_NE3210=mCONFIG_ES3210=mCONFIG_8139CP=mCONFIG_8139TOO=yCONFIG_8139TOO_PIO=yCONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not setCONFIG_8139_OLD_RX_RESET=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not setCONFIG_EPIC100=mCONFIG_SUNDANCE=yCONFIG_SUNDANCE_MMIO=yCONFIG_TLAN=mCONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not setCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not setCONFIG_DL2K=yCONFIG_E1000=mCONFIG_E1000_DISABLE_PACKET_SPLIT=yCONFIG_E1000E=yCONFIG_IP1000=y
# CONFIG_IGB is not setCONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not setCONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not setCONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not setCONFIG_TIGON3=yCONFIG_BNX2=mCONFIG_QLA3XXX=yCONFIG_ATL1=mCONFIG_ATL1E=m
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#CONFIG_WLAN_PRE80211=y
# CONFIG_STRIP is not setCONFIG_ARLAN=mCONFIG_WAVELAN=yCONFIG_PCMCIA_WAVELAN=mCONFIG_PCMCIA_NETWAVE=m
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not setCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=yCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not setCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=mCONFIG_USB_NET_RNDIS_HOST=m
# CONFIG_USB_NET_CDC_SUBSET is not setCONFIG_USB_NET_ZAURUS=mCONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=m
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not setCONFIG_PCMCIA_PCNET=mCONFIG_PCMCIA_NMCLAN=m
# CONFIG_PCMCIA_SMC91C92 is not setCONFIG_PCMCIA_XIRC2PS=mCONFIG_PCMCIA_AXNET=mCONFIG_ARCNET_COM20020_CS=m
# CONFIG_WAN is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=y
# CONFIG_ATM_TCP is not setCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=yCONFIG_ATM_ZATM=mCONFIG_ATM_ZATM_DEBUG=yCONFIG_ATM_NICSTAR=mCONFIG_ATM_NICSTAR_USE_SUNI=yCONFIG_ATM_NICSTAR_USE_IDT77105=yCONFIG_ATM_IDT77252=mCONFIG_ATM_IDT77252_DEBUG=yCONFIG_ATM_IDT77252_RCV_ALL=yCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
# CONFIG_ATM_HORIZON is not setCONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E=mCONFIG_ATM_FORE200E_USE_TASKLET=yCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not setCONFIG_HIPPI=yCONFIG_ROADRUNNER=yCONFIG_ROADRUNNER_LARGE_RINGS=yCONFIG_PLIP=yCONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not setCONFIG_PPP_FILTER=y
# CONFIG_PPP_ASYNC is not setCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_PPPOATM is not set
# CONFIG_PPPOL2TP is not setCONFIG_SLIP=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=m
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not setCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not setCONFIG_PHONE=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=mCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=yCONFIG_KEYBOARD_LKKBD=yCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_NEWTON=mCONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_GPIO is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_TOUCHKIT=yCONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not setCONFIG_MOUSE_BCM5974=yCONFIG_MOUSE_INPORT=mCONFIG_MOUSE_ATIXL=yCONFIG_MOUSE_LOGIBM=m
# CONFIG_MOUSE_PC110PAD is not setCONFIG_MOUSE_VSXXXAA=mCONFIG_MOUSE_GPIO=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=yCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=m
# CONFIG_JOYSTICK_GRIP is not setCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=yCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not setCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not setCONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not setCONFIG_JOYSTICK_TURBOGRAFX=yCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=yCONFIG_JOYSTICK_XPAD_FF=yCONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not setCONFIG_TABLET_USB_AIPTEK=yCONFIG_TABLET_USB_GTCO=yCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=yCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not setCONFIG_TOUCHSCREEN_ELO=yCONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_INEXIO is not setCONFIG_TOUCHSCREEN_MK712=yCONFIG_TOUCHSCREEN_HTCPEN=yCONFIG_TOUCHSCREEN_PENMOUNT=yCONFIG_TOUCHSCREEN_TOUCHRIGHT=mCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_UCB1400=yCONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not setCONFIG_TOUCHSCREEN_WM9712=yCONFIG_TOUCHSCREEN_WM9713=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=mCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_TOUCHIT213=yCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=yCONFIG_INPUT_APANEL=mCONFIG_INPUT_WISTRON_BTNS=mCONFIG_INPUT_ATLAS_BTNS=yCONFIG_INPUT_ATI_REMOTE=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_POWERMATE is not setCONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not setCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not setCONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not setCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=yCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_NOZOMI=m
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_CS=mCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not setCONFIG_SERIAL_8250_ACCENT=y
# CONFIG_SERIAL_8250_BOCA is not setCONFIG_SERIAL_8250_EXAR_ST16C554=mCONFIG_SERIAL_8250_HUB6=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not setCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not setCONFIG_PPDEV=mCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=yCONFIG_IPMI_PANIC_EVENT=yCONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not setCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not setCONFIG_HW_RANDOM_VIRTIO=mCONFIG_NVRAM=mCONFIG_RTC=yCONFIG_DTLK=yCONFIG_R3964=yCONFIG_APPLICOM=y
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not setCONFIG_CARDMAN_4000=mCONFIG_CARDMAN_4040=mCONFIG_IPWIRELESS=mCONFIG_MWAVE=y
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=mCONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not setCONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not setCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=m
# CONFIG_TCG_INFINEON is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=yCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=yCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=yCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=mCONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_NFORCE2=mCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=yCONFIG_I2C_VIA=yCONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_GPIO=yCONFIG_I2C_OCORES=y
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not setCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_ELEKTOR=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=y
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=mCONFIG_AT24=y
# CONFIG_SENSORS_EEPROM is not setCONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not setCONFIG_SENSORS_PCA9539=mCONFIG_SENSORS_PCF8591=mCONFIG_TPS65010=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=yCONFIG_DEBUG_GPIO=yCONFIG_GPIO_SYSFS=y
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#CONFIG_GPIO_BT8XX=y
#
# SPI GPIO expanders:
#
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not setCONFIG_BATTERY_OLPC=yCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not setCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7414=yCONFIG_SENSORS_AD7418=yCONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not setCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not setCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7473=yCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not setCONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not setCONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not setCONFIG_SENSORS_FSCHMD=yCONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not setCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=yCONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not setCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=yCONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not setCONFIG_SENSORS_LM90=yCONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not setCONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX6650 is not setCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_SIS5595=yCONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not setCONFIG_SENSORS_VT1211=yCONFIG_SENSORS_VT8231=yCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=yCONFIG_SENSORS_W83793=yCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=yCONFIG_SENSORS_W83627EHF=yCONFIG_SENSORS_HDAPS=y
# CONFIG_SENSORS_APPLESMC is not setCONFIG_HWMON_DEBUG_CHIP=yCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=yCONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_PCMCIAHOST_POSSIBLE=yCONFIG_SSB_PCMCIAHOST=yCONFIG_SSB_DEBUG=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not setCONFIG_HTC_PASIC3=y
# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not setCONFIG_DVB_CORE=mCONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#CONFIG_VIDEO_SAA7146=mCONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_CUSTOMIZE=yCONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA827X=mCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_MT2060=mCONFIG_MEDIA_TUNER_MT2266=mCONFIG_MEDIA_TUNER_MT2131=mCONFIG_MEDIA_TUNER_QT1010=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_MEDIA_TUNER_MXL5005S=mCONFIG_MEDIA_TUNER_MXL5007T=mCONFIG_VIDEO_IR=mCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_TTPCI_EEPROM=mCONFIG_DVB_BUDGET_CORE=mCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=m
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not setCONFIG_DVB_TTUSB_BUDGET=mCONFIG_DVB_TTUSB_DEC=m
# CONFIG_DVB_CINERGYT2 is not setCONFIG_DVB_SIANO_SMS1XXX=m
# CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS is not set
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not setCONFIG_DVB_B2C2_FLEXCOP_USB=mCONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#CONFIG_DVB_FE_CUSTOMISE=y
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not setCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0299=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA10086=m
# CONFIG_DVB_VES1X93 is not setCONFIG_DVB_TUNER_ITD1000=m
# CONFIG_DVB_TDA826X is not setCONFIG_DVB_TUA6100=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=m
# CONFIG_DVB_SP887X is not setCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=mCONFIG_DVB_DRX397XD=m
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not setCONFIG_DVB_NXT6000=m
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not setCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=mCONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=m
# CONFIG_DVB_TDA10021 is not setCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not setCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=m
# CONFIG_DVB_S5H1409 is not setCONFIG_DVB_AU8522=mCONFIG_DVB_S5H1411=m
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not setCONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#CONFIG_DVB_LNBP21=m
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not setCONFIG_AGP_AMD=mCONFIG_AGP_AMD64=mCONFIG_AGP_INTEL=mCONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not setCONFIG_AGP_SWORKS=mCONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not setCONFIG_DRM=mCONFIG_DRM_TDFX=mCONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not setCONFIG_DRM_I810=m
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not setCONFIG_DRM_MGA=mCONFIG_DRM_SIS=mCONFIG_DRM_VIA=mCONFIG_DRM_SAVAGE=mCONFIG_VGASTATE=yCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=mCONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_PM2 is not setCONFIG_FB_CYBER2000=yCONFIG_FB_ARC=mCONFIG_FB_IMSTT=yCONFIG_FB_UVESA=yCONFIG_FB_EFI=yCONFIG_FB_IMAC=y
# CONFIG_FB_N411 is not setCONFIG_FB_HGA=mCONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not setCONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not setCONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not setCONFIG_FB_INTEL=mCONFIG_FB_INTEL_DEBUG=yCONFIG_FB_INTEL_I2C=yCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=mCONFIG_FB_MATROX_MAVEN=mCONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_ATY128 is not setCONFIG_FB_ATY=yCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=yCONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not setCONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not setCONFIG_FB_SAVAGE_ACCEL=yCONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not setCONFIG_FB_NEOMAGIC=yCONFIG_FB_KYRO=yCONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not setCONFIG_FB_VOODOO1=mCONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not setCONFIG_FB_CARMINE=yCONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not setCONFIG_FB_GEODE=yCONFIG_FB_GEODE_LX=yCONFIG_FB_GEODE_GX=m
# CONFIG_FB_GEODE_GX1 is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_CORGI=mCONFIG_BACKLIGHT_PROGEAR=mCONFIG_BACKLIGHT_MBP_NVIDIA=m
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=yCONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not setCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not setCONFIG_AC97_BUS=yCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HID_DEBUG is not setCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_USB_HIDINPUT_POWERBOOK=yCONFIG_HID_FF=y
# CONFIG_HID_PID is not setCONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_PANTHERLORD_FF=y
# CONFIG_THRUSTMASTER_FF is not setCONFIG_ZEROPLUS_FF=yCONFIG_USB_HIDDEV=yCONFIG_USB_MOUSE=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=yCONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not setCONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1760_PCI is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_U132_HCD=mCONFIG_USB_SL811_HCD=mCONFIG_USB_SL811_CS=mCONFIG_USB_R8A66597_HCD=y
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#CONFIG_USB_USS720=y
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not setCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not setCONFIG_USB_LED=yCONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not setCONFIG_USB_PHIDGET=y
# CONFIG_USB_PHIDGETKIT is not setCONFIG_USB_PHIDGETMOTORCONTROL=yCONFIG_USB_PHIDGETSERVO=y
# CONFIG_USB_IDMOUSE is not setCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=mCONFIG_USB_SISUSBVGA=yCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=yCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=mCONFIG_USB_TEST=mCONFIG_USB_ISIGHTFW=y
# CONFIG_USB_ATM is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
#
# LED drivers
#CONFIG_LEDS_NET48XX=mCONFIG_LEDS_WRAP=m
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_CLEVO_MAIL is not setCONFIG_LEDS_PCA955X=m
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_DEFAULT_ON=yCONFIG_ACCESSIBILITY=yCONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not setCONFIG_DMADEVICES=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=yCONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not setCONFIG_DMATEST=yCONFIG_DCA=y
# CONFIG_AUXDISPLAY is not setCONFIG_UIO=yCONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not setCONFIG_UIO_PDRV_GENIRQ=yCONFIG_UIO_SMX=y
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=mCONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not setCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=m
#
# File systems
#CONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not setCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4DEV_FS=yCONFIG_EXT4DEV_FS_XATTR=y
# CONFIG_EXT4DEV_FS_POSIX_ACL is not setCONFIG_EXT4DEV_FS_SECURITY=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_JBD2=yCONFIG_JBD2_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=yCONFIG_REISERFS_CHECK=yCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not setCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not setCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not setCONFIG_FUSE_FS=yCONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not setCONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not setCONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not setCONFIG_HFS_FS=yCONFIG_HFSPLUS_FS=yCONFIG_BEFS_FS=mCONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not setCONFIG_EFS_FS=mCONFIG_CRAMFS=mCONFIG_VXFS_FS=yCONFIG_MINIX_FS=yCONFIG_OMFS_FS=yCONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_SYSV_FS=m
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=yCONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not setCONFIG_ACORN_PARTITION_POWERTEC=yCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not setCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not setCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not setCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not setCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not setCONFIG_NLS_CODEPAGE_950=yCONFIG_NLS_CODEPAGE_932=mCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not setCONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not setCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not setCONFIG_DEBUG_OBJECTS=yCONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not setCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_SLUB_DEBUG_ON=yCONFIG_SLUB_STATS=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=yCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not setCONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not setCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_VM=yCONFIG_DEBUG_VIRTUAL=yCONFIG_DEBUG_WRITECOUNT=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not setCONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_CPU_STALL is not setCONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not setCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_TRACER_MAX_TRACE=yCONFIG_TRACING=yCONFIG_FTRACE=yCONFIG_IRQSOFF_TRACER=y
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not setCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_BOOT_TRACER=yCONFIG_STACK_TRACER=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FTRACE_MCOUNT_RECORD=yCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=yCONFIG_PROVIDE_OHCI1394_DMA_INIT=yCONFIG_FIREWIRE_OHCI_REMOTE_DMA=yCONFIG_BUILD_DOCSRC=yCONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
# CONFIG_SAMPLE_TRACEPOINTS is not setCONFIG_SAMPLE_KOBJECT=yCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_STRICT_DEVMEM=yCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=yCONFIG_EARLY_PRINTK_DBGP=yCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_RODATA_TEST=yCONFIG_DEBUG_NX_TEST=mCONFIG_4KSTACKS=yCONFIG_DOUBLEFAULT=yCONFIG_MMIOTRACE_HOOKS=yCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=mCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_KMEMCHECK is not setCONFIG_DEBUG_BOOT_PARAMS=yCONFIG_CPA_DEBUG=yCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set CONFIG_SECURITY_FILE_CAPABILITIES=y CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19 CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_CRYPTD=mCONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=m
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not setCONFIG_CRYPTO_RMD160=mCONFIG_CRYPTO_RMD256=mCONFIG_CRYPTO_RMD320=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_WP512=m
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_586=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not setCONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not setCONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not setCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=mCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not setCONFIG_CRYPTO_DEV_PADLOCK_SHA=mCONFIG_CRYPTO_DEV_GEODE=mCONFIG_CRYPTO_DEV_HIFN_795X=yCONFIG_CRYPTO_DEV_HIFN_795X_RNG=yCONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not setCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=yCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=yCONFIG_X86_32_ALWAYS_ON=y
# head: 93994fe9
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.27-rc7
# Tue Sep 23 14:54:31 2008
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_BOOTPARAM_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_BOOT_ALLOWED4=yCONFIG_BROKEN_BOOT_ALLOWED3=y
# CONFIG_BROKEN_BOOT_ALLOWED2 is not set
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not setCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not setCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not setCONFIG_IKCONFIG=mCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=20CONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_DEVICE is not setCONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_RT_GROUP_SCHED=y
# CONFIG_BOOTPARAM_MAXCPUS_1 is not setCONFIG_BOOTPARAM_NOSMP=yCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not setCONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_FASTBOOT=yCONFIG_SYSCTL=yCONFIG_EMBEDDED=yCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=y
# CONFIG_ELF_CORE is not setCONFIG_PCSPKR_PLATFORM=yCONFIG_COMPAT_BRK=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
# CONFIG_HAVE_CLK is not setCONFIG_HAVE_DYN_ARRAY=yCONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_BLOCK=yCONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=mCONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="anticipatory"CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_BOOTPARAM_NO_HZ_OFF is not setCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_BOOTPARAM_HIGHRES_OFF=y
# CONFIG_SMP_SUPPORT is not setCONFIG_HAVE_SPARSE_IRQ=y
# CONFIG_X86_MPPARSE is not setCONFIG_UP_WANTED_1=yCONFIG_UP_WANTED_2=yCONFIG_UP_WANTED=yCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not setCONFIG_PARAVIRT_GUEST=yCONFIG_XEN=yCONFIG_XEN_MAX_DOMAIN_MEMORY=32CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not setCONFIG_PARAVIRT=yCONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not setCONFIG_GENERIC_CPU=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=128CONFIG_X86_INTERNODE_CACHE_BYTES=128CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_PROCESSOR_SELECT=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR_64=y
# CONFIG_X86_DS is not setCONFIG_HPET_TIMER=yCONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
# CONFIG_IOMMU_HELPER is not setCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not setCONFIG_I8K=yCONFIG_MICROCODE=mCONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not setCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not setCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not setCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not setCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_RESOURCES_64BIT=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not setCONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MTRR is not setCONFIG_EFI=yCONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR_ALL=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_CRASH_DUMP=yCONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_COMPAT_VDSO is not setCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not setCONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_0=y
# CONFIG_BOOTPARAM_NOAPIC is not setCONFIG_BOOTPARAM_NOLAPIC_TIMER=y
# CONFIG_BOOTPARAM_LAPIC is not set
# CONFIG_BOOTPARAM_HPET_DISABLE is not setCONFIG_BOOTPARAM_IDLE_MWAIT=y
# CONFIG_BOOTPARAM_IDLE_POLL is not setCONFIG_BOOTPARAM_HIGHMEM_512M=y
# CONFIG_BOOTPARAM_NOPAT is not setCONFIG_BOOTPARAM_NOTSC=yCONFIG_BOOTPARAM_PCI_NOMSI=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#CONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not setCONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not setCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not setCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_FAN is not setCONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
# CONFIG_ACPI_PROCESSOR is not setCONFIG_ACPI_WMI=yCONFIG_ACPI_ASUS=mCONFIG_ACPI_TOSHIBA=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=yCONFIG_ACPI_DEBUG_FUNC_TRACE=yCONFIG_ACPI_EC=y
# CONFIG_ACPI_PCI_SLOT is not setCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=mCONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not setCONFIG_CPU_IDLE=yCONFIG_CPU_IDLE_GOV_LADDER=yCONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not setCONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not setCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=yCONFIG_PCI_DEBUG=yCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not setCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not setCONFIG_PD6729=mCONFIG_I82092=mCONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not setCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=mCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not setCONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not setCONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not setCONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not setCONFIG_IP_PNP_RARP=yCONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not setCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not setCONFIG_INET_LRO=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=m
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not setCONFIG_TCP_CONG_HSTCP=yCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not setCONFIG_TCP_CONG_ILLINOIS=yCONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="bic"CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not setCONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not setCONFIG_IP_DCCP=yCONFIG_INET_DCCP_DIAG=mCONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2=yCONFIG_IP_DCCP_CCID2_DEBUG=y
# CONFIG_IP_DCCP_CCID3 is not set
# CONFIG_IP_DCCP_TFRC_LIB is not set
#
# DCCP Kernel Hacking
#CONFIG_IP_DCCP_DEBUG=yCONFIG_NET_DCCPPROBE=yCONFIG_IP_SCTP=yCONFIG_SCTP_DBG_MSG=yCONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not setCONFIG_ATM=yCONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not setCONFIG_ATM_BR2684=yCONFIG_ATM_BR2684_IPFILTER=yCONFIG_STP=yCONFIG_GARP=mCONFIG_BRIDGE=yCONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not setCONFIG_LLC=yCONFIG_LLC2=mCONFIG_IPX=mCONFIG_IPX_INTERN=y
# CONFIG_ATALK is not setCONFIG_X25=m
# CONFIG_LAPB is not setCONFIG_ECONET=mCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=y
# CONFIG_WAN_ROUTER is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not setCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not setCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_INGRESS=y
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=yCONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not setCONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not setCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=yCONFIG_NET_EMATCH_U32=yCONFIG_NET_EMATCH_META=yCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=m
# CONFIG_NET_ACT_GACT is not setCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_NAT=yCONFIG_NET_ACT_PEDIT=yCONFIG_NET_ACT_SIMP=mCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=y
#
# Network testing
#CONFIG_NET_PKTGEN=yCONFIG_NET_TCPPROBE=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not setCONFIG_CAN=mCONFIG_CAN_RAW=mCONFIG_CAN_BCM=m
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_IRDA=m
#
# IrDA protocols
#CONFIG_IRLAN=m
# CONFIG_IRNET is not set
# CONFIG_IRCOMM is not setCONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not setCONFIG_IRDA_FAST_RR=yCONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#CONFIG_KINGSUN_DONGLE=mCONFIG_KSDAZZLE_DONGLE=mCONFIG_KS959_DONGLE=m
#
# FIR device drivers
#CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=m
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not setCONFIG_SMC_IRCC_FIR=mCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=mCONFIG_VIA_FIR=mCONFIG_MCS_FIR=mCONFIG_BT=m
# CONFIG_BT_L2CAP is not setCONFIG_BT_SCO=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not setCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not setCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIDTL1=mCONFIG_BT_HCIBT3C=mCONFIG_BT_HCIBLUECARD=mCONFIG_BT_HCIBTUART=m
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=y
#
# Wireless
#CONFIG_CFG80211=yCONFIG_NL80211=yCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not setCONFIG_RFKILL=yCONFIG_RFKILL_INPUT=mCONFIG_RFKILL_LEDS=yCONFIG_NET_9P=yCONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not setCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not setCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PNP=yCONFIG_PNP_DEBUG=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=mCONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not setCONFIG_BLK_DEV_DAC960=yCONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=yCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=yCONFIG_BLK_DEV_UB=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not setCONFIG_ATA_OVER_ETH=y
# CONFIG_XEN_BLKDEV_FRONTEND is not setCONFIG_BLK_DEV_HD=yCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not setCONFIG_PHANTOM=yCONFIG_EEPROM_93CX6=mCONFIG_SGI_IOC4=mCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=mCONFIG_ACER_WMI=y
# CONFIG_ASUS_LAPTOP is not setCONFIG_FUJITSU_LAPTOP=yCONFIG_FUJITSU_LAPTOP_DEBUG=yCONFIG_HP_WMI=mCONFIG_MSI_LAPTOP=m
# CONFIG_COMPAL_LAPTOP is not setCONFIG_SONY_LAPTOP=yCONFIG_SONYPI_COMPAT=yCONFIG_THINKPAD_ACPI=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_BAY is not set
# CONFIG_THINKPAD_ACPI_VIDEO is not setCONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_EEEPC_LAPTOP is not setCONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not setCONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not setCONFIG_CHR_DEV_OSST=m
# CONFIG_BLK_DEV_SR is not setCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=m
# CONFIG_SCSI_ENCLOSURE is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SRP_ATTRS=yCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=mCONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_3W_9XXX is not setCONFIG_SCSI_ACARD=mCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=mCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000CONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not setCONFIG_SCSI_DPT_I2O=yCONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_ARCMSR is not setCONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not setCONFIG_MEGARAID_LEGACY=yCONFIG_MEGARAID_SAS=mCONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not setCONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_EATA is not setCONFIG_SCSI_FUTURE_DOMAIN=yCONFIG_SCSI_GDTH=yCONFIG_SCSI_IPS=m
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not setCONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not setCONFIG_SCSI_IZIP_SLOW_CTR=y
# CONFIG_SCSI_STEX is not setCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not setCONFIG_SCSI_IPR=yCONFIG_SCSI_IPR_TRACE=y
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not setCONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not setCONFIG_SCSI_DC390T=m
# CONFIG_SCSI_SRP is not setCONFIG_SCSI_LOWLEVEL_PCMCIA=yCONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=mCONFIG_SCSI_DH=mCONFIG_SCSI_DH_RDAC=mCONFIG_SCSI_DH_HP_SW=mCONFIG_SCSI_DH_EMC=mCONFIG_SCSI_DH_ALUA=mCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_ACPI is not setCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=mCONFIG_ATA_SFF=yCONFIG_SATA_SVW=yCONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not setCONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not setCONFIG_SATA_QSTOR=y
# CONFIG_SATA_PROMISE is not setCONFIG_SATA_SX4=m
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not setCONFIG_SATA_ULI=mCONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not setCONFIG_SATA_INIC162X=y
# CONFIG_PATA_ALI is not setCONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not setCONFIG_PATA_ATIIXP=m
# CONFIG_PATA_CMD640_PCI is not setCONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not setCONFIG_PATA_CS5530=mCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=m
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not setCONFIG_PATA_IT8213=yCONFIG_PATA_JMICRON=yCONFIG_PATA_TRIFLEX=yCONFIG_PATA_MARVELL=yCONFIG_PATA_MPIIX=mCONFIG_PATA_OLDPIIX=yCONFIG_PATA_NETCELL=mCONFIG_PATA_NINJA32=yCONFIG_PATA_NS87410=m
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not setCONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PCMCIA is not setCONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not setCONFIG_PATA_SC1200=y
# CONFIG_PATA_SERVERWORKS is not setCONFIG_PATA_PDC2027X=m
# CONFIG_PATA_SIL680 is not setCONFIG_PATA_SIS=yCONFIG_PATA_VIA=mCONFIG_PATA_WINBOND=mCONFIG_PATA_PLATFORM=yCONFIG_PATA_SCH=y
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not setCONFIG_FIREWIRE_SBP2=mCONFIG_IEEE1394=y
# CONFIG_IEEE1394_OHCI1394 is not set CONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not setCONFIG_IEEE1394_RAWIO=mCONFIG_IEEE1394_VERBOSEDEBUG=yCONFIG_I2O=mCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not setCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not setCONFIG_I2O_BLOCK=m
# CONFIG_I2O_SCSI is not setCONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_IFB=m
# CONFIG_DUMMY is not setCONFIG_BONDING=m
# CONFIG_MACVLAN is not setCONFIG_EQUALIZER=mCONFIG_TUN=yCONFIG_VETH=m
# CONFIG_NET_SB1000 is not setCONFIG_ARCNET=mCONFIG_ARCNET_1201=mCONFIG_ARCNET_1051=m
# CONFIG_ARCNET_RAW is not setCONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=mCONFIG_ARCNET_RIM_I=mCONFIG_ARCNET_COM20020=mCONFIG_ARCNET_COM20020_PCI=mCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not setCONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=yCONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not setCONFIG_BROADCOM_PHY=mCONFIG_ICPLUS_PHY=mCONFIG_REALTEK_PHY=mCONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=mCONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=m
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not setCONFIG_VORTEX=yCONFIG_ENC28J60=yCONFIG_ENC28J60_WRITEVERIFY=y
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not setCONFIG_ADAPTEC_STARFIRE=mCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=yCONFIG_EEPRO100=mCONFIG_E100=yCONFIG_FEALNX=m
# CONFIG_NATSEMI is not setCONFIG_NE2K_PCI=mCONFIG_8139CP=yCONFIG_8139TOO=yCONFIG_8139TOO_PIO=yCONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not setCONFIG_8139_OLD_RX_RESET=yCONFIG_R6040=mCONFIG_SIS900=m
# CONFIG_EPIC100 is not setCONFIG_SUNDANCE=mCONFIG_SUNDANCE_MMIO=y
# CONFIG_TLAN is not setCONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not setCONFIG_SC92031=y
# CONFIG_NET_POCKET is not setCONFIG_NETDEV_1000=yCONFIG_ACENIC=yCONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not setCONFIG_E1000=yCONFIG_E1000_DISABLE_PACKET_SPLIT=yCONFIG_E1000E=yCONFIG_IP1000=mCONFIG_IGB=mCONFIG_IGB_LRO=y
# CONFIG_NS83820 is not setCONFIG_HAMACHI=y
# CONFIG_YELLOWFIN is not setCONFIG_R8169=yCONFIG_R8169_VLAN=yCONFIG_SIS190=yCONFIG_SKGE=mCONFIG_SKGE_DEBUG=y
# CONFIG_SKY2 is not setCONFIG_VIA_VELOCITY=mCONFIG_TIGON3=yCONFIG_BNX2=m
# CONFIG_QLA3XXX is not setCONFIG_ATL1=mCONFIG_ATL1E=y
# CONFIG_NETDEV_10000 is not setCONFIG_TR=yCONFIG_IBMOL=mCONFIG_3C359=y
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#CONFIG_WLAN_PRE80211=yCONFIG_STRIP=m
# CONFIG_PCMCIA_WAVELAN is not setCONFIG_PCMCIA_NETWAVE=m
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#CONFIG_USB_CATC=yCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not setCONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not setCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_FMVJ18X=mCONFIG_PCMCIA_PCNET=mCONFIG_PCMCIA_NMCLAN=mCONFIG_PCMCIA_SMC91C92=m
# CONFIG_PCMCIA_XIRC2PS is not setCONFIG_PCMCIA_AXNET=mCONFIG_ARCNET_COM20020_CS=m
# CONFIG_WAN is not setCONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not setCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not setCONFIG_ATM_ENI_TUNE_BURST=yCONFIG_ATM_ENI_BURST_TX_16W=yCONFIG_ATM_ENI_BURST_TX_8W=yCONFIG_ATM_ENI_BURST_TX_4W=yCONFIG_ATM_ENI_BURST_TX_2W=yCONFIG_ATM_ENI_BURST_RX_16W=yCONFIG_ATM_ENI_BURST_RX_8W=yCONFIG_ATM_ENI_BURST_RX_4W=y
# CONFIG_ATM_ENI_BURST_RX_2W is not setCONFIG_ATM_FIRESTREAM=y
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_IDT77252 is not setCONFIG_ATM_AMBASSADOR=y
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not setCONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not setCONFIG_XEN_NETDEV_FRONTEND=yCONFIG_FDDI=y
# CONFIG_DEFXX is not setCONFIG_SKFP=y
# CONFIG_HIPPI is not setCONFIG_PLIP=mCONFIG_PPP=mCONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not setCONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not setCONFIG_PPPOATM=mCONFIG_PPPOL2TP=m
# CONFIG_SLIP is not setCONFIG_SLHC=mCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not setCONFIG_KEYBOARD_LKKBD=yCONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_GPIO is not setCONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not setCONFIG_MOUSE_SERIAL=yCONFIG_MOUSE_APPLETOUCH=mCONFIG_MOUSE_BCM5974=mCONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=yCONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not setCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not setCONFIG_TOUCHSCREEN_ELO=yCONFIG_TOUCHSCREEN_MTOUCH=yCONFIG_TOUCHSCREEN_INEXIO=mCONFIG_TOUCHSCREEN_MK712=mCONFIG_TOUCHSCREEN_PENMOUNT=mCONFIG_TOUCHSCREEN_TOUCHRIGHT=yCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_UCB1400=mCONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not setCONFIG_TOUCHSCREEN_WM9712=yCONFIG_TOUCHSCREEN_WM9713=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not setCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not setCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not setCONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not setCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=m
# CONFIG_HVC_XEN is not setCONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_HW_RANDOM is not setCONFIG_NVRAM=y
# CONFIG_RTC is not setCONFIG_GEN_RTC=mCONFIG_GEN_RTC_X=yCONFIG_R3964=mCONFIG_APPLICOM=y
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=m
# CONFIG_CARDMAN_4000 is not setCONFIG_CARDMAN_4040=mCONFIG_IPWIRELESS=mCONFIG_MWAVE=y
CONFIG_PC8736x_GPIO=mCONFIG_NSC_GPIO=mCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not setCONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not setCONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not setCONFIG_TCG_INFINEON=mCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=m
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not setCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_SIS5595=m
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not setCONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_GPIO=mCONFIG_I2C_OCORES=m
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_TAOS_EVM=mCONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#CONFIG_I2C_VOODOO3=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not setCONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not setCONFIG_AT24=mCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_PCF8591=mCONFIG_TPS65010=mCONFIG_SENSORS_MAX6875=mCONFIG_SENSORS_TSL2550=mCONFIG_I2C_DEBUG_CORE=yCONFIG_I2C_DEBUG_ALGO=yCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=yCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not setCONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#CONFIG_SPI_AT25=mCONFIG_SPI_SPIDEV=yCONFIG_SPI_TLE62X0=yCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=yCONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not setCONFIG_GPIO_PCA953X=mCONFIG_GPIO_PCF857X=m
#
# PCI GPIO expanders:
#CONFIG_GPIO_BT8XX=m
#
# SPI GPIO expanders:
#CONFIG_GPIO_MAX7301=mCONFIG_GPIO_MCP23S08=yCONFIG_W1=m
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=m
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not setCONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not setCONFIG_W1_SLAVE_DS2760=mCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=y
# CONFIG_BATTERY_DS2760 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=yCONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=yCONFIG_SENSORS_AD7414=m
# CONFIG_SENSORS_AD7418 is not setCONFIG_SENSORS_ADCXX=yCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not setCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7473=m
# CONFIG_SENSORS_K8TEMP is not setCONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not setCONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not setCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not setCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not setCONFIG_SENSORS_LM70=yCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not setCONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not setCONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not setCONFIG_SENSORS_LM93=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not setCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_VIA686A is not setCONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not setCONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not setCONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not setCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_APPLESMC is not setCONFIG_HWMON_DEBUG_CHIP=yCONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not setCONFIG_WATCHDOG=yCONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not setCONFIG_ALIM1535_WDT=m
# CONFIG_ALIM7101_WDT is not setCONFIG_SC520_WDT=mCONFIG_IB700_WDT=yCONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not setCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=y
# CONFIG_HP_WATCHDOG is not setCONFIG_SC1200_WDT=yCONFIG_PC87413_WDT=y
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not setCONFIG_CPU5_WDT=mCONFIG_SMSC37B787_WDT=yCONFIG_W83627HF_WDT=yCONFIG_W83697HF_WDT=mCONFIG_W83877F_WDT=yCONFIG_W83977F_WDT=yCONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=m
# CONFIG_WDT_501_PCI is not set
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=yCONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not setCONFIG_MFD_SM501=yCONFIG_HTC_PASIC3=m
# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
#
# Multimedia core support
#CONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2_COMMON=mCONFIG_VIDEO_ALLOW_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_DVB_CORE=yCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#CONFIG_VIDEO_SAA7146=mCONFIG_VIDEO_SAA7146_VV=m
# CONFIG_MEDIA_ATTACH is not setCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_CUSTOMIZE=yCONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA827X=mCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not setCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_MT2060=mCONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MT2131 is not setCONFIG_MEDIA_TUNER_QT1010=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_MEDIA_TUNER_MXL5005S=mCONFIG_MEDIA_TUNER_MXL5007T=mCONFIG_VIDEO_V4L2=mCONFIG_VIDEO_V4L1=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEO_IR=m
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not setCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_TTPCI_EEPROM=mCONFIG_DVB_AV7110=mCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET_CORE=mCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=m
# CONFIG_DVB_BUDGET_AV is not set
# CONFIG_DVB_BUDGET_PATCH is not set
#
# Supported USB Adapters
#CONFIG_DVB_USB=mCONFIG_DVB_USB_DEBUG=yCONFIG_DVB_USB_A800=mCONFIG_DVB_USB_DIBUSB_MB=mCONFIG_DVB_USB_DIBUSB_MB_FAULTY=yCONFIG_DVB_USB_DIBUSB_MC=mCONFIG_DVB_USB_DIB0700=mCONFIG_DVB_USB_UMT_010=mCONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_M920X is not setCONFIG_DVB_USB_GL861=mCONFIG_DVB_USB_AU6610=m
# CONFIG_DVB_USB_DIGITV is not setCONFIG_DVB_USB_VP7045=mCONFIG_DVB_USB_VP702X=mCONFIG_DVB_USB_GP8PSK=mCONFIG_DVB_USB_NOVA_T_USB2=mCONFIG_DVB_USB_TTUSB2=m
# CONFIG_DVB_USB_DTT200U is not setCONFIG_DVB_USB_OPERA1=mCONFIG_DVB_USB_DW2102=m
# CONFIG_DVB_USB_ANYSEE is not setCONFIG_DVB_TTUSB_BUDGET=m
# CONFIG_DVB_TTUSB_DEC is not setCONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not setCONFIG_DVB_SIANO_SMS1XXX=m
# CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS is not set
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=mCONFIG_DVB_B2C2_FLEXCOP_PCI=mCONFIG_DVB_B2C2_FLEXCOP_USB=mCONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not setCONFIG_DVB_CX24123=mCONFIG_DVB_MT312=mCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0299=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA10086=mCONFIG_DVB_VES1X93=mCONFIG_DVB_TUNER_ITD1000=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUA6100=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=m
# CONFIG_DVB_DRX397XD is not setCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=mCONFIG_DVB_DIB3000MB=mCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=m
# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=mCONFIG_DVB_OR51211=mCONFIG_DVB_OR51132=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=mCONFIG_DVB_S5H1409=mCONFIG_DVB_AU8522=m
# CONFIG_DVB_S5H1411 is not set
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=mCONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#CONFIG_DVB_LNBP21=mCONFIG_DVB_ISL6405=mCONFIG_DVB_ISL6421=m
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_AGP is not setCONFIG_DRM=yCONFIG_DRM_TDFX=m
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not setCONFIG_DRM_MGA=yCONFIG_DRM_VIA=yCONFIG_DRM_SAVAGE=m
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=yCONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_CORGI=mCONFIG_BACKLIGHT_PROGEAR=mCONFIG_BACKLIGHT_MBP_NVIDIA=m
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=yCONFIG_SOUND=m
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not setCONFIG_AC97_BUS=m
# CONFIG_HID_SUPPORT is not setCONFIG_USB_MOUSE=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not setCONFIG_USB_DEVICE_CLASS=yCONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not setCONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not setCONFIG_USB_MON=y
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=yCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=mCONFIG_USB_ISP1760_PCI=yCONFIG_USB_OHCI_HCD=yCONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=yCONFIG_USB_WDM=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y # CONFIG_USB_STORAGE_SDDR55 is not set CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_STORAGE_SIERRA=y CONFIG_USB_STORAGE_CYPRESS_ATACB=y CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=m
#
# USB port drivers
#
# CONFIG_USB_USS720 is not setCONFIG_USB_SERIAL=yCONFIG_USB_SERIAL_CONSOLE=yCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not setCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP2101=m
# CONFIG_USB_SERIAL_CYPRESS_M8 is not setCONFIG_USB_SERIAL_EMPEG=yCONFIG_USB_SERIAL_FTDI_SIO=yCONFIG_USB_SERIAL_FUNSOFT=mCONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not setCONFIG_USB_SERIAL_IR=yCONFIG_USB_SERIAL_EDGEPORT=yCONFIG_USB_SERIAL_EDGEPORT_TI=yCONFIG_USB_SERIAL_GARMIN=yCONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=yCONFIG_USB_SERIAL_KEYSPAN=y
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not setCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not setCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not setCONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
# CONFIG_USB_SERIAL_KLSI is not setCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_MOS7720=yCONFIG_USB_SERIAL_MOS7840=yCONFIG_USB_SERIAL_MOTOROLA=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=yCONFIG_USB_SERIAL_OTI6858=yCONFIG_USB_SERIAL_SPCP8X5=y
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_TI=yCONFIG_USB_SERIAL_CYBERJACK=yCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not setCONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not setCONFIG_USB_LCD=yCONFIG_USB_BERRY_CHARGE=mCONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not setCONFIG_USB_CYTHERM=yCONFIG_USB_PHIDGET=yCONFIG_USB_PHIDGETKIT=yCONFIG_USB_PHIDGETMOTORCONTROL=m
# CONFIG_USB_PHIDGETSERVO is not setCONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not setCONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not setCONFIG_USB_IOWARRIOR=mCONFIG_USB_ISIGHTFW=mCONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not setCONFIG_USB_UEAGLEATM=mCONFIG_USB_XUSBATM=mCONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not setCONFIG_MMC_TEST=y
#
# MMC/SD Host Controller Drivers
#CONFIG_MMC_SDHCI=yCONFIG_MMC_SDHCI_PCI=yCONFIG_MMC_RICOH_MMC=m
# CONFIG_MMC_WBSD is not setCONFIG_MMC_TIFM_SD=mCONFIG_MMC_SPI=mCONFIG_MMC_SDRICOH_CS=m
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#CONFIG_LEDS_PCA9532=mCONFIG_LEDS_GPIO=mCONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not setCONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not setCONFIG_INFINIBAND=mCONFIG_INFINIBAND_USER_MAD=mCONFIG_INFINIBAND_USER_ACCESS=mCONFIG_INFINIBAND_USER_MEM=yCONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not setCONFIG_INFINIBAND_IPATH=mCONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
# CONFIG_MLX4_INFINIBAND is not setCONFIG_INFINIBAND_NES=mCONFIG_INFINIBAND_NES_DEBUG=yCONFIG_INFINIBAND_IPOIB=mCONFIG_INFINIBAND_IPOIB_CM=y
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
# CONFIG_INFINIBAND_SRP is not setCONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not setCONFIG_AUXDISPLAY=yCONFIG_KS0108=mCONFIG_KS0108_PORT=0x378CONFIG_KS0108_DELAY=2CONFIG_UIO=mCONFIG_UIO_CIF=mCONFIG_UIO_PDRV=mCONFIG_UIO_PDRV_GENIRQ=mCONFIG_UIO_SMX=mCONFIG_XEN_BALLOON=y
# CONFIG_XEN_SCRUB_PAGES is not set
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=yCONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not setCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=y
#
# File systems
#CONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT2_FS_XIP=yCONFIG_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4DEV_FS=y
# CONFIG_EXT4DEV_FS_XATTR is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=mCONFIG_REISERFS_CHECK=yCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not setCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_DLM=mCONFIG_OCFS2_FS=yCONFIG_OCFS2_FS_O2CB=yCONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not setCONFIG_OCFS2_DEBUG_MASKLOG=yCONFIG_OCFS2_DEBUG_FS=y
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not setCONFIG_QFMT_V1=mCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=mCONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not setCONFIG_ZISOFS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=yCONFIG_HFS_FS=yCONFIG_HFSPLUS_FS=yCONFIG_BEFS_FS=mCONFIG_BEFS_DEBUG=yCONFIG_BFS_FS=yCONFIG_EFS_FS=mCONFIG_CRAMFS=yCONFIG_VXFS_FS=mCONFIG_MINIX_FS=yCONFIG_OMFS_FS=mCONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_SYSV_FS=mCONFIG_UFS_FS=yCONFIG_UFS_FS_WRITE=yCONFIG_UFS_DEBUG=y
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not setCONFIG_ACORN_PARTITION_ICS=yCONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not setCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not setCONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not setCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not setCONFIG_NLS_CODEPAGE_950=mCONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not setCONFIG_NLS_CODEPAGE_874=m
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not setCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=yCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not setCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=yCONFIG_DLM=yCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=y
# CONFIG_DETECT_SOFTLOCKUP is not setCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not setCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not setCONFIG_DEBUG_VM=yCONFIG_DEBUG_VIRTUAL=yCONFIG_DEBUG_WRITECOUNT=yCONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not setCONFIG_DEBUG_NOTIFIERS=yCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL is not set
# CONFIG_KPROBES_SANITY_TEST is not setCONFIG_BACKTRACE_SELF_TEST=yCONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not setCONFIG_LATENCYTOP=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_TRACING=yCONFIG_FTRACE=y
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SYSPROF_TRACER=y
# CONFIG_SCHED_TRACER is not setCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_BOOT_TRACER=yCONFIG_STACK_TRACER=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FTRACE_MCOUNT_RECORD=yCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=yCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=mCONFIG_KGDB_TESTS=yCONFIG_STRICT_DEVMEM=yCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=yCONFIG_EARLY_PRINTK_DBGP=yCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=yCONFIG_DEBUG_PAGEALLOC=yCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=yCONFIG_DIRECT_GBPAGES=yCONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not setCONFIG_MMIOTRACE_HOOKS=yCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=mCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not setCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
# CONFIG_KEYS is not setCONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19 CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=mCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=mCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=mCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not setCONFIG_CRYPTO_RMD128=mCONFIG_CRYPTO_RMD160=mCONFIG_CRYPTO_RMD256=mCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_WP512=m
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not setCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not setCONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not setCONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not setCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_X86_64=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not setCONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not setCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_64=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
Quoted 50 lines · Ingo Molnar
below is the delta patch i've applied to tip/timers/posixtimers - might be easier to review for those who've seen v1 and who'd like to check the changes.
...kernel/sched.c +7
-29+unsigned long long task_delta_exec (struct task_struct *p) { +struct rq *rq; +unsigned long flags; +u64 ns =0 ; + + rq =task_rq_lock (p, &flags);if (task_current (rq, p)) {u64 delta_exec;update_rq_clock (rq); delta_exec = rq->clock - p->se.exec_start;if ((s64 )delta_exec >0 ) -return delta_exec; + ns = delta_exec; } -return 0 ; -} - -/* -* Return p->sum_exec_runtime plus any more ns on the sched_clock -* that have not yet been banked in case the task is currently running. -*/ -unsigned long long task_sched_runtime (struct task_struct *p) -{ -unsigned long flags; -u64 ns; -struct rq *rq; - - rq =task_rq_lock (p, &flags); - ns = p->se.sum_exec_runtime +task_delta_exec (p, rq); -task_rq_unlock (rq, &flags); - -return ns; -} - -/* -* Return sum_exec_runtime for the thread group plus any more ns on the -* sched_clock that have not yet been banked in case the task is currently -* running. -*/ -unsigned long long thread_group_sched_runtime (struct task_struct *p) -{ -unsigned long flags;
kernel/sched.c EXPORT_PER_CPU_SYMBOL(kstat); · line 4059
Quoted 10 lines
kernel/sched.c +0
-8-u64 ns; -struct rq *rq; -struct task_cputime totals; - - rq =task_rq_lock (p, &flags); -thread_group_cputime (p, &totals); - ns = totals.sum_exec_runtime +task_delta_exec (p, rq); -task_rq_unlock (rq, &flags);return ns;
Looks like task_delta_exec() forgets to unlock rq.
Quoted 11 lines
kernel/sched_stats.h +11
-0+static inline void thread_group_cputime_account_exec_runtime ( +struct thread_group_cputime *tgtimes, +unsigned long long ns) +{ +if (tgtimes->totals) { +struct task_cputime *times; + + times =per_cpu_ptr (tgtimes->totals,get_cpu ()); + times->sum_exec_runtime += ns; +put_cpu_no_resched (); + }
kernel/sched_stats.h sched_info_switch(struct task_struct *prev, struct task_struct *next) · line 358
Quoted 10 lines
kernel/sched_stats.h +10
-0+} + +#else /* CONFIG_SMP */ + +static inline void thread_group_cputime_account_user ( +struct thread_group_cputime *tgtimes, +cputime_t cputime) +{ + tgtimes->totals->utime =cputime_add (tgtimes->totals->utime, cputime); +}
Confused. Unless I misread the patch, tgtimes->totals can be NULL on UP too?
Do we really need the special version for !CONFIG_SMP ? per_cpu_ptr() just returns the pointer. Yes, get_cpu() disables preemption, but perhaps this is tolerable?
(of course, this can't explain the crash)
Oleg.
Quoted 2 lines · Oleg Nesterov
Confused. Unless I misread the patch,
tgtimes->totalscan be NULL on UP too?
Yep. I've had about four different irons in the fire over the last few days and I think because of that I ended up giving this less attention than I should have. I'll beat on this some more and reroll the patch in the next day or so.
I'll also provide the delta patch as Ingo requested.
Sorry, folks.
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Quoted 1 line · Oleg Nesterov
Looks like
task_delta_exec()forgets to unlock rq.
Actually it shouldn't be locking rq. I failed to delete the lock.
Quoted 2 lines
Confused. Unless I misread the patch,
tgtimes->totalscan be NULL on UP too?
Yeah. I totally messed up on this, too many things going on at once. I've eliminated the SMP/UP split in sched_stats.h and pulled it all into the three basic functions.
Quoted 1 line
(of course, this can't explain the crash)
I'll be investigating this in the morning (I'm at home today and without a test box).
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
PATCH 1/1 Fix itimer/many thread hang.
In reply to Frank MayharA couple of days ago I re-resubmitted the itimer/many thread hang. Unfortunately, I had too many things going on at once and screwed it up, not verifying the UP version and entirely missing a set of cleanups that I had intended to include. This rectifies that screwup.
At Ingo's request, this is an incremental patch, relative to the code in his -tip tree.
These changes have been minimally tested on both UP and SMP environments. They simplify the UP code, consolidating pretty much all of it with the SMP version and depending on lower-level SMP/UP handling to take care of the differences. It also cleans up some UP compile errors, moves the scheduler stats-related macros into kernel/sched_stats.h, cleans up a merge error in kernel/fork.c and has a few other minor fixes and cleanups as suggested by Oleg and Ingo. Again, thanks for the reviews, guys.
I'm dropping the original README; if you want it it's in the archives at least three times.
include/linux/kernel_stat.h | 1 + include/linux/sched.h | 182 +------------------------------------------ kernel/fork.c | 5 +- kernel/posix-cpu-timers.c | 155 +++++++++++++++--------------------- kernel/sched.c | 46 ++---------- kernel/sched_stats.h | 86 ++++++++++++++++++++ 6 files changed, 163 insertions(+), 312 deletions(-)
include/linux/kernel_stat.h +1 -0
@@ -70,6 +70,7 @@ static inline unsigned int kstat_irqs(unsigned int irq)return sum; } +extern unsigned long long task_delta_exec (struct task_struct *);extern void account_user_time (struct task_struct *,cputime_t );extern void account_user_time_scaled (struct task_struct *,cputime_t );extern void account_system_time (struct task_struct *,int ,cputime_t );
include/linux/sched.h +4 -178
213 lines not on this page · raw message
kernel/fork.c +1 -4
@@ -797,7 +797,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)int ret;if (clone_flags &CLONE_THREAD ) { - ret =thread_group_cputime_clone_thread (current, tsk); + ret =thread_group_cputime_clone_thread (current);if (likely (!ret)) {atomic_inc (¤t->signal->count);atomic_inc (¤t->signal->live);
@@ -840,9 +840,6 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt =0 ; sig->inblock = sig->oublock = sig->cinblock = sig->coublock =0 ;task_io_accounting_init (&sig->ioac); -INIT_LIST_HEAD (&sig->cpu_timers[0 ]); -INIT_LIST_HEAD (&sig->cpu_timers[1 ]); -INIT_LIST_HEAD (&sig->cpu_timers[2 ]);taskstats_tgid_init (sig);task_lock (current->group_leader);
kernel/posix-cpu-timers.c +64 -89
260 lines not on this page · raw message
kernel/sched.c +6 -40
61 lines not on this page · raw message
kernel/sched_stats.h +86 -0
89 lines not on this page · raw message
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Ingo Molnar
AppliedQuoted 8 lines · Frank Mayhar
A couple of days ago I re-resubmitted the itimer/many thread hang. Unfortunately, I had too many things going on at once and screwed it up, not verifying the UP version and entirely missing a set of cleanups that I had intended to include. This rectifies that screwup.
At Ingo's request, this is an incremental patch, relative to the code in his -tip tree.
Quoted 8 lines
These changes have been minimally tested on both UP and SMP environments. They simplify the UP code, consolidating pretty much all of it with the SMP version and depending on lower-level SMP/UP handling to take care of the differences. It also cleans up some UP compile errors, moves the scheduler stats-related macros into
kernel/sched_stats.h, cleans up a merge error inkernel/fork.cand has a few other minor fixes and cleanups as suggested by Oleg and Ingo. Again, thanks for the reviews, guys.
applied to tip/timers/posixtimers, thanks Frank!
the additional simplifications in v2->v3:
3 files changed, 38 insertions(+), 90 deletions(-)
look really good. If you dont hear from me it means -tip testing goes fine and the patches are queued up for v2.6.28.
Ingo
Quoted 6 lines · Frank Mayhar
/*
* Return any ns on thesched_clockthat have not yet been banked in
* @p in case that task is currently running.
- *
- * Called withtask_rq_lock()held on @rq.
*/
kernel/sched.c EXPORT_PER_CPU_SYMBOL(kstat); · line 4059
Quoted 9 lines
kernel/sched.c +5
-1-static unsigned long long task_delta_exec (struct task_struct *p,struct rq *rq) +unsigned long long task_delta_exec (struct task_struct *p) { +struct rq *rq; +unsigned long flags; +u64 ns =0 ; +if (task_current (rq, p)) {u64 delta_exec;
hmmm ... where do we get 'rq' from?
in v3 you did this:
- rq = task_rq_lock(p, &flags);
which removed the deadlock but left us with a random uninitialized rq variable ...
the right solution for the bug would have been to unlock it. Miraculously we didnt actually crash anywhere visibly, found it by reviewing the code. I thought this code gets excercised quite frequently. The commit below fixes it.
Could you please functionality-test latest tip/master:
http://people.redhat.com/mingo/tip.git/README
with your testcase that excercises these codepaths heavily?
Thanks,
Ingo
Quoted 20 lines · Ingo Molnar
Quoted 6 lines · Frank Mayhar
/*
* Return any ns on thesched_clockthat have not yet been banked in
* @p in case that task is currently running.
- *
- * Called withtask_rq_lock()held on @rq.
*/kernel/sched.c EXPORT_PER_CPU_SYMBOL(kstat); · line 4059
Quoted 9 lines
kernel/sched.c +5
-1-static unsigned long long task_delta_exec (struct task_struct *p,struct rq *rq) +unsigned long long task_delta_exec (struct task_struct *p) { +struct rq *rq; +unsigned long flags; +u64 ns =0 ; +if (task_current (rq, p)) {u64 delta_exec;hmmm ... where do we get 'rq' from?
Quoted 6 lines
in v3 you did this:
- rq =
task_rq_lock(p, &flags);which removed the deadlock but left us with a random uninitialized rq variable ...
You know, I just knew I had a brain around here _somewhere_.
Weirdly, this didn't fall over on any of my testing. The gods know what it was actually doing, though.
I'm picking up tip/master right now and will test your fix for this shortly.
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Quoted 2 lines · Frank Mayhar
I'm picking up tip/master right now and will test your fix for this shortly.
Okay, I've put it through its paces and everything appears to be working well with Ingo's fix.
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Quoted 6 lines · Frank Mayhar
Quoted 2 lines · Frank Mayhar
I'm picking up tip/master right now and will test your fix for this shortly.
Okay, I've put it through its paces and everything appears to be working well with Ingo's fix.
great, thanks for checking!
it has not caused any new problems in -tip testing either, and that means a couple of thousand test builds and test boots so far in the past week, so we've got the usual codepaths covered pretty well. With your test of the less common codepaths we should be pretty good in general.
Ingo
a couple of fixlets below, pointed out by scripts/checkpatch.pl.
Ingo
---------->
Quoted 1 line
From
5ce73a4a5a4893a1aa4cdeed1b1a5a6de42c43b6Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sun, 14 Sep 2008 17:11:46 +0200
Subject: [PATCH] timers: fix itimer/many thread hang, cleanups
--- include/linux/sched.h | 2 +- kernel/posix-cpu-timers.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
include/linux/sched.h +1 -1
@@ -430,7 +430,7 @@ struct pacct_struct {* @utime: time spent in user mode, in &cputime_t units * @stime: time spent in kernel mode, in &cputime_t units * @sum_exec_runtime: total time spent on the CPU, in nanoseconds -* +* * This structure groups together three kinds of CPU time that are * tracked for threads and thread groups. Most things considering * CPU time want to group these counts together and treat all three
kernel/posix-cpu-timers.c +3 -3
@@ -94,7 +94,7 @@ void update_rlimit_cpu(unsigned long rlim_new) cputime =secs_to_cputime (rlim_new);if (cputime_eq (current->signal->it_prof_expires, cputime_zero) || -cputime_lt (current->signal->it_prof_expires, cputime)) { +cputime_lt (current->signal->it_prof_expires, cputime)) {spin_lock_irq (¤t->sighand->siglock);set_process_cpu_timer (current,CPUCLOCK_PROF , &cputime,NULL );spin_unlock_irq (¤t->sighand->siglock);
@@ -1372,9 +1372,9 @@ void run_posix_cpu_timers(struct task_struct *tsk)* tsk->signal is non-NULL; this probably can't happen but cover the * possibility anyway. */ -if (unlikely (!sig) || !fastpath_timer_check (tsk, sig)) { +if (unlikely (!sig) || !fastpath_timer_check (tsk, sig))return ; - } + sighand =lock_task_sighand (tsk, &flags);if (likely (sighand)) {/*
Quoted 62 lines · Frank Mayhar
include/linux/sched.h +59
-0+/** +* thread_group_cputime_account_user - Maintain utime for a thread group. +* +* @tgtimes: Pointer to thread_group_cputime structure. +* @cputime: Time value by which to increment the utime field of that +* structure. +* +* If thread group time is being maintained, get the structure for the +* running CPU and update the utime field there. +*/ +static inline void thread_group_cputime_account_user ( +struct thread_group_cputime *tgtimes, +cputime_t cputime) +{ +if (tgtimes->totals) { +struct task_cputime *times; + + times =per_cpu_ptr (tgtimes->totals,get_cpu ()); + times->utime =cputime_add (times->utime, cputime); +put_cpu_no_resched (); + } +} + +/** +* thread_group_cputime_account_system - Maintain stime for a thread group. +* +* @tgtimes: Pointer to thread_group_cputime structure. +* @cputime: Time value by which to increment the stime field of that +* structure. +* +* If thread group time is being maintained, get the structure for the +* running CPU and update the stime field there. +*/ +static inline void thread_group_cputime_account_system ( +struct thread_group_cputime *tgtimes, +cputime_t cputime) +{ +if (tgtimes->totals) { +struct task_cputime *times; + + times =per_cpu_ptr (tgtimes->totals,get_cpu ()); + times->stime =cputime_add (times->stime, cputime); +put_cpu_no_resched (); + } +} + +/** +* thread_group_cputime_account_exec_runtime - Maintain exec runtime for a +* thread group. +* +* @tgtimes: Pointer to thread_group_cputime structure. +* @ns: Time value by which to increment the sum_exec_runtime field +* of that structure. +* +* If thread group time is being maintained, get the structure for the +* running CPU and update the sum_exec_runtime field there. +*/ +static inline void thread_group_cputime_account_exec_runtime( + struct thread_group_cputime *tgtimes,
include/linux/sched.h static inline int spin_needbreak(spinlock_t *lock) · line 2231
Quoted 10 lines
include/linux/sched.h +10
-0+ unsigned long long ns) +{ +if (tgtimes->totals) { +struct task_cputime *times; + + times =per_cpu_ptr (tgtimes->totals,get_cpu ()); + times->sum_exec_runtime += ns; +put_cpu_no_resched (); + } +}
please uninline these functions.
Ingo
Quoted 1 line
please uninline these functions.
They are short and have only one caller.
Thanks,
Roland
Quoted 3 lines · Roland McGrath
Quoted 1 line
please uninline these functions.
They are short and have only one caller.
then they should be defined in the .c file which uses them.
really, sched.h is large enough already and has lots of unnecessary stuff in it.
Ingo
Quoted 7 lines · Ingo Molnar
Quoted 3 lines · Roland McGrath
Quoted 1 line
please uninline these functions.
They are short and have only one caller.
then they should be defined in the .c file which uses them.
Well, they are actually used in sched.h, in the inline routines account_group_user_time() and friends, which are in turn used by routines in sched.c. The point here is that the thread_group_cputime_account_xxx() routines are defined differently depending upon whether we're building for UP or SMP and the account_group_xxx() routines use the appropriate version accordingly.
Quoted 2 lines
really,
sched.his large enough already and has lots of unnecessary stuff in it.
Agreed, but Roland and I were trying to make life easier for folks who have to maintain SMP and UP versions of this stuff, keeping it all in one place rather than scattering it about.
If you insist, I'll un-inline the routines but this will mean moving all of this (thread_group_cputime_account_xxx() and account_group_xxx() routines) to sched.c. Maybe that makes sense. It's your call; I'll hold off on the changes (and resubmitting the patch) while I wait for you to let me know what you prefer. Thanks.
Signature · 2 lines
Frank Mayhar <[email protected]> Google, Inc.
Quoted 23 lines · Frank Mayhar
Quoted 7 lines · Ingo Molnar
Quoted 3 lines · Roland McGrath
Quoted 1 line
please uninline these functions.
They are short and have only one caller.
then they should be defined in the .c file which uses them.
Well, they are actually used in
sched.h, in the inline routinesaccount_group_user_time()and friends, which are in turn used by routines insched.c. The point here is that thethread_group_cputime_account_xxx()routines are defined differently depending upon whether we're building for UP or SMP and theaccount_group_xxx()routines use the appropriate version accordingly.Quoted 2 lines
really,
sched.his large enough already and has lots of unnecessary stuff in it.Agreed, but Roland and I were trying to make life easier for folks who have to maintain SMP and UP versions of this stuff, keeping it all in one place rather than scattering it about.
Quoted 5 lines
If you insist, I'll un-inline the routines but this will mean moving all of this (
thread_group_cputime_account_xxx()andaccount_group_xxx()routines) tosched.c. Maybe that makes sense. It's your call; I'll hold off on the changes (and resubmitting the patch) while I wait for you to let me know what you prefer. Thanks.
it's already in tip/sched/posix-cpu-timers, so please send a delta patch against tip/master:
http://people.redhat.com/mingo/tip.git/README
i'd suggest to move all the scheduler-internal accounting functions into kernel/sched_stats.h. AFAICS there's no scheduler-external user of these APIs. The most widely used external APIs is thread_group_cputime_smp(), and that is out of line already. (except on UP where it's trivial)
Ingo