port pcxhr driver do devres
PATCH 1/1 port pcxhr driver do devres
---
I was a bit bored and ported the pcxhr driver to use devres to manage it's IRQ and PCI resources. This is completely untested as I don't have such a card but you might find it useful nevertheless.
commit e7df0303a1517bdd0d2f0af5fbdf91acc0b7f426
tree 45fbf9c75c8ea51ae89f0409ed02138380b71624
parent 9824b8f11373b0df806c135a342da9319ef1d893
author Rolf Eike Beer <[email protected]> Sun, 21 Sep 2008 17:26:28 +0200 committer Rolf Eike Beer <[email protected]> Sun, 21 Sep 2008 17:26:28 +0200
sound/pci/pcxhr/pcxhr.c | 14 ++------------ 1 files changed, 2 insertions(+), 12 deletions(-)
sound/pci/pcxhr/pcxhr.c +2 -12
@@ -1171,12 +1171,6 @@ static int pcxhr_free(struct pcxhr_mgr *mgr)snd_printdd ("reset pcxhr !\n" ); } -/* release irq */ -if (mgr->irq >=0 ) -free_irq (mgr->irq, mgr); - -pci_release_regions (mgr->pci); -/* free hostport purgebuffer */ if (mgr->hostport.area) {snd_dma_free_pages (&mgr->hostport);
@@ -1185,7 +1179,6 @@ static int pcxhr_free(struct pcxhr_mgr *mgr)kfree (mgr->prmh); -pci_disable_device (mgr->pci);kfree (mgr);return 0 ; }
@@ -1210,21 +1203,19 @@ static int __devinit pcxhr_probe(struct pci_dev *pci, const struct pci_device_id }/* enable PCI device */ -if ((err =pci_enable_device (pci)) <0 ) +if ((err =pcim_enable_device (pci)) <0 )return err;pci_set_master (pci);/* check if we can restrict PCI DMA transfers to 32 bits */ if (pci_set_dma_mask (pci,DMA_32BIT_MASK ) <0 ) {snd_printk (KERN_ERR "architecture does not support 32bit PCI busmaster DMA\n" ); -pci_disable_device (pci);return -ENXIO ; }/* alloc card manager */ mgr =kzalloc (sizeof (*mgr),GFP_KERNEL );if (! mgr) { -pci_disable_device (pci);return -ENOMEM ; }
@@ -1238,7 +1229,6 @@ static int __devinit pcxhr_probe(struct pci_dev *pci, const struct pci_device_id/* resource assignment */ if ((err =pci_request_regions (pci, card_name)) <0 ) {kfree (mgr); -pci_disable_device (pci);return err; }for (i =0 ; i <3 ; i++)
@@ -1247,7 +1237,7 @@ static int __devinit pcxhr_probe(struct pci_dev *pci, const struct pci_device_id mgr->pci = pci; mgr->irq =-1 ; -if (request_irq (pci->irq, pcxhr_interrupt,IRQF_SHARED , +if (devm_request_irq (&pci->dev, pci->irq, pcxhr_interrupt,IRQF_SHARED , card_name, mgr)) {snd_printk (KERN_ERR "unable to grab IRQ %d\n" , pci->irq);pcxhr_free (mgr);
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Sun, 21 Sep 2008 17:31:39 +0200,
Quoted 7 lines · Rolf Eike Beer
Signed-off-by Rolf Eike Beer <[email protected]>---
I was a bit bored and ported the pcxhr driver to use devres to manage it's IRQ and PCI resources. This is completely untested as I don't have such a card but you might find it useful nevertheless.
Thanks for the patch.
I think it's good to do this kind of clean ups, but I'd like to make sure that it works properly after the change.
Any other sound driver to test by yourself?
Takashi
Quoted 10 lines · Takashi Iwai
At Sun, 21 Sep 2008 17:31:39 +0200,
Quoted 6 lines · Rolf Eike Beer
Signed-off-by Rolf Eike Beer <[email protected]>---
I was a bit bored and ported the pcxhr driver to use devres to manage it's IRQ and PCI resources. This is completely untested as I don't have such a card but you might find it useful nevertheless.
Quoted 6 lines
Thanks for the patch.
I think it's good to do this kind of clean ups, but I'd like to make sure that it works properly after the change.
Any other sound driver to test by yourself?
Sorry for the delay. No, nothing around at the moment, especially no time.
Greetings,
Eike
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel