Skip to contentSkip to conversation

NMI watchdog: when booting with reset_devices, clear the performance counters

PATCH Applied Aristeu Rozanski 2 participants 5 messages Sep 22, 2008 x86

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 NMI watchdog: when booting with reset_devices, clear the performance counters

P4s have a quirk that makes necessary to clear P4_CCCR_OVF bit on the CCCR everytime the PMI is triggered. When booting the kernel with reset_devices (more specific kdump case), the counters reach zero and the PMI will be generated. This is not a problem on other processors but on P4s, it'll continue to generate NMIs until that bit is cleared. Since there may be other users of the performance counters, clear and disable all of them when booting with reset_devices option.

We have a P4 box here that crashes because of this problem. Since the kdump kernel usually boots with only one processor active, the second logical unit won't be set up, therefore, MSR_P4_IQ_CCCR1 (and other performance counter registers) won't be cleared and P4_CCCR_OVF may be still set because the previous kernel was using this register. An NMI is triggered because of the MSR_P4_IQ_CCCR1 right after the NMI delivery is enabled, triggering the race fixed on my previous email.

---
 arch/x86/kernel/cpu/perfctr-watchdog.c |   40 +++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
arch/x86/kernel/cpu/perfctr-watchdog.c +41 -0
@@ -444,6 +444,27 @@ static const struct wd_ops p6_wd_ops = {
 #define P4_CCCR_ENABLE		(1 << 12)
 #define P4_CCCR_OVF 		(1 << 31)
 
+#define P4_CONTROLS 18
+static unsigned int p4_controls[18] = {
+	MSR_P4_BPU_CCCR0,
+	MSR_P4_BPU_CCCR1,
+	MSR_P4_BPU_CCCR2,
+	MSR_P4_BPU_CCCR3,
+	MSR_P4_MS_CCCR0,
+	MSR_P4_MS_CCCR1,
+	MSR_P4_MS_CCCR2,
+	MSR_P4_MS_CCCR3,
+	MSR_P4_FLAME_CCCR0,
+	MSR_P4_FLAME_CCCR1,
+	MSR_P4_FLAME_CCCR2,
+	MSR_P4_FLAME_CCCR3,
+	MSR_P4_IQ_CCCR0,
+	MSR_P4_IQ_CCCR1,
+	MSR_P4_IQ_CCCR2,
+	MSR_P4_IQ_CCCR3,
+	MSR_P4_IQ_CCCR4,
+	MSR_P4_IQ_CCCR5,
+};
 /*
  * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
  * CRU_ESCR0 (with any non-null event selector) through a complemented
@@ -485,6 +506,26 @@ static int setup_p4_watchdog(unsigned nm
 		evntsel_msr = MSR_P4_CRU_ESCR0;
 		cccr_msr = MSR_P4_IQ_CCCR0;
 		cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
+
+		/*
+		 * If we're on the kdump kernel or other situation, we may
+		 * still have other performance counter registers set to
+		 * interrupt and they'll keep interrupting forever because
+		 * of the P4_CCCR_OVF quirk. So we need to ACK all the
+		 * pending interrupts and disable all the registers here,
+		 * before reenabling the NMI delivery. Refer to p4_rearm()
+		 * about the P4_CCCR_OVF quirk.
+		 */
+		if (reset_devices) {
+			unsigned int low, high;
+			int i;
+
+			for (i = 0; i < P4_CONTROLS; i++) {
+				rdmsr(p4_controls[i], low, high);
+				low &= ~(P4_CCCR_ENABLE | P4_CCCR_OVF);
+				wrmsr(p4_controls[i], low, high);
+			}
+		}
 	} else {
 		/* logical cpu 1 */
 		perfctr_msr = MSR_P4_IQ_PERFCTR1;
Applied
#1 lore raw
Quoted 16 lines · Aristeu Rozanski

P4s have a quirk that makes necessary to clear P4_CCCR_OVF bit on the CCCR everytime the PMI is triggered. When booting the kernel with reset_devices (more specific kdump case), the counters reach zero and the PMI will be generated. This is not a problem on other processors but on P4s, it'll continue to generate NMIs until that bit is cleared. Since there may be other users of the performance counters, clear and disable all of them when booting with reset_devices option.

We have a P4 box here that crashes because of this problem. Since the kdump kernel usually boots with only one processor active, the second logical unit won't be set up, therefore, MSR_P4_IQ_CCCR1 (and other performance counter registers) won't be cleared and P4_CCCR_OVF may be still set because the previous kernel was using this register. An NMI is triggered because of the MSR_P4_IQ_CCCR1 right after the NMI delivery is enabled, triggering the race fixed on my previous email.

Quoted 4 lines

applied to tip/x86/nmi-watchdog, thanks.

i'm wondering, is this fix a v2.6.27 candidate?

Ingo

#2 lore raw
Quoted 16 lines
Quoted 16 lines

P4s have a quirk that makes necessary to clear P4_CCCR_OVF bit on the CCCR everytime the PMI is triggered. When booting the kernel with reset_devices (more specific kdump case), the counters reach zero and the PMI will be generated. This is not a problem on other processors but on P4s, it'll continue to generate NMIs until that bit is cleared. Since there may be other users of the performance counters, clear and disable all of them when booting with reset_devices option.

We have a P4 box here that crashes because of this problem. Since the kdump kernel usually boots with only one processor active, the second logical unit won't be set up, therefore, MSR_P4_IQ_CCCR1 (and other performance counter registers) won't be cleared and P4_CCCR_OVF may be still set because the previous kernel was using this register. An NMI is triggered because of the MSR_P4_IQ_CCCR1 right after the NMI delivery is enabled, triggering the race fixed on my previous email.

Quoted 8 lines
Quoted 4 lines

applied to tip/x86/nmi-watchdog, thanks.

i'm wondering, is this fix a v2.6.27 candidate?

I believe so. Even being a small affected group (P4 based boxes using NMI watchdog and kdump), it's fully reproducible.

Signature · 1 line
Aristeu
#3 lore raw
Quoted 21 lines · Aristeu Rozanski
Quoted 21 lines
Quoted 20 lines

P4s have a quirk that makes necessary to clear P4_CCCR_OVF bit on the CCCR everytime the PMI is triggered. When booting the kernel with reset_devices (more specific kdump case), the counters reach zero and the PMI will be generated. This is not a problem on other processors but on P4s, it'll continue to generate NMIs until that bit is cleared. Since there may be other users of the performance counters, clear and disable all of them when booting with reset_devices option.

We have a P4 box here that crashes because of this problem. Since the kdump kernel usually boots with only one processor active, the second logical unit won't be set up, therefore, MSR_P4_IQ_CCCR1 (and other performance counter registers) won't be cleared and P4_CCCR_OVF may be still set because the previous kernel was using this register. An NMI is triggered because of the MSR_P4_IQ_CCCR1 right after the NMI delivery is enabled, triggering the race fixed on my previous email.

Quoted 5 lines
Quoted 3 lines

applied to tip/x86/nmi-watchdog, thanks.

i'm wondering, is this fix a v2.6.27 candidate?

I believe so. Even being a small affected group (P4 based boxes using NMI watchdog and kdump), it's fully reproducible.

is there a bugzilla.kernel.org entry for it? If not, could you please file it? Thanks,

Ingo

#4 lore raw
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines

applied to tip/x86/nmi-watchdog, thanks.

i'm wondering, is this fix a v2.6.27 candidate?

I believe so. Even being a small affected group (P4 based boxes using NMI watchdog and kdump), it's fully reproducible.

is there a bugzilla.kernel.org entry for it? If not, could you please file it? Thanks,

#11621 created

Signature · 1 line
Aristeu