Skip to contentSkip to conversation

Omap McBSP updates from linux-omap tree, v2

PATCH In review Tony Lindgren 2 participants 16 messages Sep 24, 2008 – Oct 9, 2008

Subsystems (4)
lore
Share & tools
lore

Tony Lindgren

author maintainer
#0 lore raw

cover Omap McBSP updates from linux-omap tree, v2

Hi all,

This series contains pending McBSP patches from linux-omap tree for review.

These patches are against Russell's devel branch as patches against the mainline tree would currently produce merge conflicts.

Regards,

Tony

author maintainer
#1 lore raw

PATCH 1/5 Don't use __init but __devinit to define probe function. A pointer to

From: Uwe Kleine-König <[email protected]>

echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/unbind echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/bind

While at it move the remove function to the .devexit.text section.

---
 arch/arm/plat-omap/mcbsp.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/plat-omap/mcbsp.c +3 -3
index e63990f..e0803a8 100644
@@ -804,7 +804,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
  */
-static int __init omap_mcbsp_probe(struct platform_device *pdev)
+static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 {
 	struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
 	int id = pdev->id - 1;
@@ -868,7 +868,7 @@ exit:
 	return ret;
 }
 
-static int omap_mcbsp_remove(struct platform_device *pdev)
+static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 {
 	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
 
@@ -894,7 +894,7 @@ static int omap_mcbsp_remove(struct platform_device *pdev)
 
 static struct platform_driver omap_mcbsp_driver = {
 	.probe		= omap_mcbsp_probe,
-	.remove		= omap_mcbsp_remove,
+	.remove		= __devexit_p(omap_mcbsp_remove),
 	.driver		= {
 		.name	= "omap-mcbsp",
 	},
Signature · 6 lines
1.5.6.rc3.21.g8c6b5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
author maintainer
#2 lore raw

PATCH 2/5 ARM: OMAP: Allocate McBSP devices dynamically

From: Chandra Shekhar <[email protected]>

Based on Chandra's earlier patches in linux-omap tree.

Note that omap1_mcbsp_check and omap2_mcbsp_check are no longer needed as there's now omap_mcbsp_check_valid_id() defined.

Also some functions can now be marked __init.

---
 arch/arm/mach-omap1/mcbsp.c             |   37 +--
 arch/arm/mach-omap2/mcbsp.c             |   28 +--
 arch/arm/plat-omap/include/mach/mcbsp.h |   33 ++-
 arch/arm/plat-omap/mcbsp.c              |  388 ++++++++++++++++++-------------
 4 files changed, 270 insertions(+), 216 deletions(-)
arch/arm/mach-omap1/mcbsp.c +12 -25
index afb5789..7de7c69 100644
@@ -103,30 +103,6 @@ static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
 { }
 #endif
 
-static int omap1_mcbsp_check(unsigned int id)
-{
-	/* REVISIT: Check correctly for number of registered McBSPs */
-	if (cpu_is_omap730()) {
-		if (id > OMAP_MAX_MCBSP_COUNT - 2) {
-		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
-				id + 1);
-		       return -ENODEV;
-		}
-		return 0;
-	}
-
-	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-		if (id > OMAP_MAX_MCBSP_COUNT - 1) {
-			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
-				id + 1);
-			return -ENODEV;
-		}
-		return 0;
-	}
-
-	return -ENODEV;
-}
-
 static void omap1_mcbsp_request(unsigned int id)
 {
 	/*
@@ -151,7 +127,6 @@ static void omap1_mcbsp_free(unsigned int id)
 }
 
 static struct omap_mcbsp_ops omap1_mcbsp_ops = {
-	.check		= omap1_mcbsp_check,
 	.request	= omap1_mcbsp_request,
 	.free		= omap1_mcbsp_free,
 };
@@ -263,6 +238,18 @@ int __init omap1_mcbsp_init(void)
 	}
 
 	if (cpu_is_omap730())
+		omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
+	if (cpu_is_omap15xx())
+		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap16xx())
+		omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
+
+	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+								GFP_KERNEL);
+	if (!mcbsp_ptr)
+		return -ENOMEM;
+
+	if (cpu_is_omap730())
 		omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
 						OMAP730_MCBSP_PDATA_SZ);
 
arch/arm/mach-omap2/mcbsp.c +12 -16
index 709db03..73f2279 100644
@@ -28,7 +28,7 @@ struct mcbsp_internal_clk {
 	int n_childs;
 };
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX)
 static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
 {
 	const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
@@ -117,18 +117,8 @@ static void omap2_mcbsp_request(unsigned int id)
 		omap2_mcbsp2_mux_setup();
 }
 
-static int omap2_mcbsp_check(unsigned int id)
-{
-	if (id > OMAP_MAX_MCBSP_COUNT - 1) {
-		printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
-		return -ENODEV;
-	}
-	return 0;
-}
-
 static struct omap_mcbsp_ops omap2_mcbsp_ops = {
 	.request	= omap2_mcbsp_request,
-	.check		= omap2_mcbsp_check,
 };
 
 #ifdef CONFIG_ARCH_OMAP24XX
@@ -185,7 +175,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 #define OMAP34XX_MCBSP_PDATA_SZ		0
 #endif
 
-int __init omap2_mcbsp_init(void)
+static int __init omap2_mcbsp_init(void)
 {
 	int i;
 
@@ -196,13 +186,19 @@ int __init omap2_mcbsp_init(void)
 	}
 
 	if (cpu_is_omap24xx())
+		omap_mcbsp_count = OMAP24XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap34xx())
+		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+
+	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+								GFP_KERNEL);
+	if (!mcbsp_ptr)
+		return -ENOMEM;
+
+	if (cpu_is_omap24xx())
 		omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
 						OMAP24XX_MCBSP_PDATA_SZ);
 
-	if (cpu_is_omap34xx())
-		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
-						OMAP34XX_MCBSP_PDATA_SZ);
-
 	return omap_mcbsp_init();
 }
 arch_initcall(omap2_mcbsp_init);
arch/arm/plat-omap/include/mach/mcbsp.h +21 -12
index a3074f2..46898fa 100644
@@ -81,9 +81,6 @@
 #define OMAP_MCBSP_REG_XCERG	0x3A
 #define OMAP_MCBSP_REG_XCERH	0x3C
 
-#define OMAP_MAX_MCBSP_COUNT	3
-#define MAX_MCBSP_CLOCKS	3
-
 #define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
 #define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
 
@@ -91,12 +88,14 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
 #define OMAP_MCBSP_REG_DXR2	0x08
 #define OMAP_MCBSP_REG_DXR1	0x0C
+#define OMAP_MCBSP_REG_DRR	0x00
+#define OMAP_MCBSP_REG_DXR	0x08
 #define OMAP_MCBSP_REG_SPCR2	0x10
 #define OMAP_MCBSP_REG_SPCR1	0x14
 #define OMAP_MCBSP_REG_RCR2	0x18
@@ -124,9 +123,9 @@
 #define OMAP_MCBSP_REG_RCERH	0x70
 #define OMAP_MCBSP_REG_XCERG	0x74
 #define OMAP_MCBSP_REG_XCERH	0x78
-
-#define OMAP_MAX_MCBSP_COUNT	2
-#define MAX_MCBSP_CLOCKS	2
+#define OMAP_MCBSP_REG_SYSCON	0x8C
+#define OMAP_MCBSP_REG_XCCR	0xAC
+#define OMAP_MCBSP_REG_RCCR	0xB0
 
 #define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
 #define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
@@ -137,10 +136,6 @@
 
 #endif
 
-#define OMAP_MCBSP_READ(base, reg)		__raw_readw((base) + OMAP_MCBSP_REG_##reg)
-#define OMAP_MCBSP_WRITE(base, reg, val)	__raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
-
-
 /************************** McBSP SPCR1 bit definitions ***********************/
 #define RRST			0x0001
 #define RRDY			0x0002
@@ -151,6 +146,7 @@
 #define DXENA			0x0080
 #define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
 #define RJUST(value)		((value)<<13)	/* bits 13:14 */
+#define ALB			0x8000
 #define DLB			0x8000
 
 /************************** McBSP SPCR2 bit definitions ***********************/
@@ -228,6 +224,17 @@
 #define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
 #define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
 
+/*********************** McBSP XCCR bit definitions *************************/
+#define DILB			0x0020
+#define XDMAEN			0x0008
+#define XDISABLE		0x0001
+
+/********************** McBSP RCCR bit definitions *************************/
+#define RDMAEN			0x0008
+#define RDISABLE		0x0001
+
+/********************** McBSP SYSCONFIG bit definitions ********************/
+#define SOFTRST			0x0002
 
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
@@ -311,7 +318,6 @@ struct omap_mcbsp_spi_cfg {
 struct omap_mcbsp_ops {
 	void (*request)(unsigned int);
 	void (*free)(unsigned int);
-	int (*check)(unsigned int);
 };
 
 struct omap_mcbsp_platform_data {
@@ -353,6 +359,8 @@ struct omap_mcbsp {
 	struct omap_mcbsp_platform_data *pdata;
 	struct clk *clk;
 };
+extern struct omap_mcbsp **mcbsp_ptr;
+extern int omap_mcbsp_count;
 
 int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
@@ -377,5 +385,6 @@ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg *
 /* Polled read/write functions */
 int omap_mcbsp_pollread(unsigned int id, u16 * buf);
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
 
 #endif
arch/arm/plat-omap/mcbsp.c +225 -163

741 lines not on this page · raw message

Signature · 1 line
1.5.6.rc3.21.g8c6b5
author maintainer
#3 lore raw

PATCH 3/5 ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx

From: Chandra Shekhar <[email protected]>

Based on Chandra's earlier patches in linux-omap tree.

---
 arch/arm/mach-omap2/mcbsp.c             |   56 ++++++++++++++++++++++++++++++-
 arch/arm/plat-omap/include/mach/mcbsp.h |    5 +++
 2 files changed, 60 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/mcbsp.c +55 -1
index 73f2279..b4fe0f3 100644
@@ -28,7 +28,7 @@ struct mcbsp_internal_clk {
 	int n_childs;
 };
 
-#if defined(CONFIG_ARCH_OMAP24XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
 {
 	const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
@@ -89,6 +89,30 @@ static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
 			.disable	= omap_mcbsp_clk_disable,
 		},
 	},
+	{
+		.clk = {
+			.name		= "mcbsp_clk",
+			.id		= 3,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+	{
+		.clk = {
+			.name		= "mcbsp_clk",
+			.id		= 4,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
+	{
+		.clk = {
+			.name		= "mcbsp_clk",
+			.id		= 5,
+			.enable		= omap_mcbsp_clk_enable,
+			.disable	= omap_mcbsp_clk_disable,
+		},
+	},
 };
 
 #define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
@@ -168,6 +192,33 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.ops		= &omap2_mcbsp_ops,
 		.clk_name	= "mcbsp_clk",
 	},
+	{
+		.phys_base	= OMAP34XX_MCBSP3_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP3_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP3_TX,
+		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP34XX_MCBSP4_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP4_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP4_TX,
+		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP34XX_MCBSP5_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP5_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP5_TX,
+		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
 #else
@@ -198,6 +249,9 @@ static int __init omap2_mcbsp_init(void)
 	if (cpu_is_omap24xx())
 		omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
 						OMAP24XX_MCBSP_PDATA_SZ);
+	if (cpu_is_omap34xx())
+		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
+						OMAP34XX_MCBSP_PDATA_SZ);
 
 	return omap_mcbsp_init();
 }
arch/arm/plat-omap/include/mach/mcbsp.h +5 -0
index 46898fa..f4e7980 100644
@@ -46,6 +46,9 @@
 
 #define OMAP34XX_MCBSP1_BASE	0x48074000
 #define OMAP34XX_MCBSP2_BASE	0x49022000
+#define OMAP34XX_MCBSP3_BASE	0x49024000
+#define OMAP34XX_MCBSP4_BASE	0x49026000
+#define OMAP34XX_MCBSP5_BASE	0x48096000
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
 
@@ -267,6 +270,8 @@ typedef enum {
 	OMAP_MCBSP1 = 0,
 	OMAP_MCBSP2,
 	OMAP_MCBSP3,
+	OMAP_MCBSP4,
+	OMAP_MCBSP5
 } omap_mcbsp_id;
 
 typedef int __bitwise omap_mcbsp_io_type_t;
Signature · 1 line
1.5.6.rc3.21.g8c6b5
author maintainer
#4 lore raw

PATCH 4/5 ARM: OMAP: Add support for OMAP2430 in McBSP

From: Jarkko Nikula <[email protected]>

---
 arch/arm/mach-omap2/mcbsp.c             |   79 +++++++++++++++++++++++++++----
 arch/arm/plat-omap/include/mach/mcbsp.h |    3 +
 2 files changed, 72 insertions(+), 10 deletions(-)
arch/arm/mach-omap2/mcbsp.c +69 -10
index b4fe0f3..cae3ebe 100644
@@ -145,8 +145,8 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = {
 	.request	= omap2_mcbsp_request,
 };
 
-#ifdef CONFIG_ARCH_OMAP24XX
-static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
+#ifdef CONFIG_ARCH_OMAP2420
+static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP24XX_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
@@ -166,10 +166,64 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 };
-#define OMAP24XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap24xx_mcbsp_pdata)
+#define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
 #else
-#define omap24xx_mcbsp_pdata		NULL
-#define OMAP24XX_MCBSP_PDATA_SZ		0
+#define omap2420_mcbsp_pdata		NULL
+#define OMAP2420_MCBSP_PDATA_SZ		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
+	{
+		.phys_base	= OMAP24XX_MCBSP1_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
+		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP24XX_MCBSP2_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
+		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP2430_MCBSP3_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP3_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP3_TX,
+		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP2430_MCBSP4_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP4_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP4_TX,
+		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+	{
+		.phys_base	= OMAP2430_MCBSP5_BASE,
+		.dma_rx_sync	= OMAP24XX_DMA_MCBSP5_RX,
+		.dma_tx_sync	= OMAP24XX_DMA_MCBSP5_TX,
+		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
+		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
+		.ops		= &omap2_mcbsp_ops,
+		.clk_name	= "mcbsp_clk",
+	},
+};
+#define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
+#else
+#define omap2430_mcbsp_pdata		NULL
+#define OMAP2430_MCBSP_PDATA_SZ		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP34XX
@@ -236,8 +290,10 @@ static int __init omap2_mcbsp_init(void)
 		clk_register(&omap_mcbsp_clks[i].clk);
 	}
 
-	if (cpu_is_omap24xx())
-		omap_mcbsp_count = OMAP24XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap2420())
+		omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
+	if (cpu_is_omap2430())
+		omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
 	if (cpu_is_omap34xx())
 		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
 
@@ -246,9 +302,12 @@ static int __init omap2_mcbsp_init(void)
 	if (!mcbsp_ptr)
 		return -ENOMEM;
 
-	if (cpu_is_omap24xx())
-		omap_mcbsp_register_board_cfg(omap24xx_mcbsp_pdata,
-						OMAP24XX_MCBSP_PDATA_SZ);
+	if (cpu_is_omap2420())
+		omap_mcbsp_register_board_cfg(omap2420_mcbsp_pdata,
+						OMAP2420_MCBSP_PDATA_SZ);
+	if (cpu_is_omap2430())
+		omap_mcbsp_register_board_cfg(omap2430_mcbsp_pdata,
+						OMAP2430_MCBSP_PDATA_SZ);
 	if (cpu_is_omap34xx())
 		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
 						OMAP34XX_MCBSP_PDATA_SZ);
arch/arm/plat-omap/include/mach/mcbsp.h +3 -0
index f4e7980..6a0d1a0 100644
@@ -43,6 +43,9 @@
 
 #define OMAP24XX_MCBSP1_BASE	0x48074000
 #define OMAP24XX_MCBSP2_BASE	0x48076000
+#define OMAP2430_MCBSP3_BASE	0x4808c000
+#define OMAP2430_MCBSP4_BASE	0x4808e000
+#define OMAP2430_MCBSP5_BASE	0x48096000
 
 #define OMAP34XX_MCBSP1_BASE	0x48074000
 #define OMAP34XX_MCBSP2_BASE	0x49022000
Signature · 1 line
1.5.6.rc3.21.g8c6b5
author maintainer
#5 lore raw

PATCH 5/5 ARM: OMAP: Fixes to omap_mcbsp_request function

From: Jarkko Nikula <[email protected]>

Bootloader may let McBSP logic running so make sure that block is idle before requesting IRQs. Also make sure that TX and RX waitqueues are initialized before request_irq.

---
 arch/arm/plat-omap/mcbsp.c |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)
arch/arm/plat-omap/mcbsp.c +9 -4
index f27e641..af33fc7 100644
@@ -234,8 +234,16 @@ int omap_mcbsp_request(unsigned int id)
 	mcbsp->free = 0;
 	spin_unlock(&mcbsp->lock);
 
+	/*
+	 * Make sure that transmitter, receiver and sample-rate generator are
+	 * not running before activating IRQs.
+	 */
+	OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0);
+	OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0);
+
 	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
 		/* We need to get IRQs here */
+		init_completion(&mcbsp->tx_irq_completion);
 		err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
 					0, "McBSP", (void *)mcbsp);
 		if (err != 0) {
@@ -245,8 +253,7 @@ int omap_mcbsp_request(unsigned int id)
 			return err;
 		}
 
-		init_completion(&mcbsp->tx_irq_completion);
-
+		init_completion(&mcbsp->rx_irq_completion);
 		err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler,
 					0, "McBSP", (void *)mcbsp);
 		if (err != 0) {
@@ -256,8 +263,6 @@ int omap_mcbsp_request(unsigned int id)
 			free_irq(mcbsp->tx_irq, (void *)mcbsp);
 			return err;
 		}
-
-		init_completion(&mcbsp->rx_irq_completion);
 	}
 
 	return 0;
Signature · 1 line
1.5.6.rc3.21.g8c6b5
#7 lore raw

Re: [PATCH 5/5] ARM: OMAP: Fixes to omap_mcbsp_request function

Quoted 11 lines · Russell King - ARM Linux
Quoted 8 lines · Tony Lindgren

From: Jarkko Nikula <[email protected]>

Bootloader may let McBSP logic running so make sure that block is idle before requesting IRQs. Also make sure that TX and RX waitqueues are initialized before request_irq.

Ok.

Please note that we're into the _final_ week before the merge window opens, which means I'm beginning to close down accepting patches.

If you want to get these in, please expedite it. Thanks.

#8 lore raw

Re: [PATCH 5/5] ARM: OMAP: Fixes to omap_mcbsp_request function

In reply to Russell King - ARM Linux
Quoted 11 lines · Russell King - ARM Linux
Quoted 8 lines · Tony Lindgren

From: Jarkko Nikula <[email protected]>

Bootloader may let McBSP logic running so make sure that block is idle before requesting IRQs. Also make sure that TX and RX waitqueues are initialized before request_irq.

Ok.

The other question to ask about these patches is: does it finally allow mainline to reach parity with your tree on the McBSP code?

If not, is it possible to have a set of patches which brings the McBSP code completely up to date in mainline?

author maintainer
#9 lore raw

git-pull request for omap mcbsp changes (Re: [PATCH 5/5] ARM: OMAP: Fixes to omap_mcbsp_request function)

Quoted 8 lines · Russell King - ARM Linux
Quoted 7 lines · Russell King - ARM Linux
Quoted 6 lines · Tony Lindgren

From: Jarkko Nikula <[email protected]>

Bootloader may let McBSP logic running so make sure that block is idle before requesting IRQs. Also make sure that TX and RX waitqueues are initialized before request_irq.

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

Ok.

The other question to ask about these patches is: does it finally allow mainline to reach parity with your tree on the McBSP code?

Yes.

Quoted 2 lines

If not, is it possible to have a set of patches which brings the McBSP code completely up to date in mainline?

There are no other McBSP patches pending right now.

Here's the pull request for you for these patches:

The following changes since commit 56f68556d7bbb51dd158c74deb09c783345bfbbd:
Russell King (1):
Merge unstable branch 'omap-rmk'

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-upstream

Chandra Shekhar (2):
ARM: OMAP: Allocate McBSP devices dynamically
ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx

Jarkko Nikula (2):
ARM: OMAP: Add support for OMAP2430 in McBSP
ARM: OMAP: Fixes to omap_mcbsp_request function

Uwe Kleine-König (1):
Fix sections for omap-mcbsp platform driver

 arch/arm/mach-omap1/mcbsp.c             |   37 +--
 arch/arm/mach-omap2/mcbsp.c             |  147 ++++++++++--
 arch/arm/plat-omap/include/mach/mcbsp.h |   41 +++-
 arch/arm/plat-omap/mcbsp.c              |  403 ++++++++++++++++++-------------
 4 files changed, 404 insertions(+), 224 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#10 lore raw

Re: git-pull request for omap mcbsp changes (Re: [PATCH 5/5] ARM: OMAP: Fixes to omap_mcbsp_request function)

Quoted 38 lines · Tony Lindgren
Quoted 8 lines · Russell King - ARM Linux
Quoted 7 lines · Russell King - ARM Linux
Quoted 6 lines · Tony Lindgren

From: Jarkko Nikula <[email protected]>

Bootloader may let McBSP logic running so make sure that block is idle before requesting IRQs. Also make sure that TX and RX waitqueues are initialized before request_irq.

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

Ok.

The other question to ask about these patches is: does it finally allow mainline to reach parity with your tree on the McBSP code?

Yes.

Quoted 2 lines

If not, is it possible to have a set of patches which brings the McBSP code completely up to date in mainline?

There are no other McBSP patches pending right now.

Here's the pull request for you for these patches:

The following changes since commit 56f68556d7bbb51dd158c74deb09c783345bfbbd:
Russell King (1):
Merge unstable branch 'omap-rmk'

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-upstream

Chandra Shekhar (2):
ARM: OMAP: Allocate McBSP devices dynamically
ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx

Quoted 6 lines

Jarkko Nikula (2):
ARM: OMAP: Add support for OMAP2430 in McBSP
ARM: OMAP: Fixes to omap_mcbsp_request function

Uwe Kleine-König (1):
Fix sections for omap-mcbsp platform driver

Pulled.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#13 lore raw

Re: [PATCH 2/5] ARM: OMAP: Allocate McBSP devices dynamically

In reply to Tony Lindgren
Quoted 11 lines · Tony Lindgren

From: Chandra Shekhar <[email protected]>

Based on Chandra's earlier patches in linux-omap tree.

Note that omap1_mcbsp_check and omap2_mcbsp_check are no longer needed as there's now omap_mcbsp_check_valid_id() defined.

Also some functions can now be marked __init.

Ok.

author maintainer
#14 lore raw

Re: [PATCH 1/5] Fix sections for omap-mcbsp platform driver

In reply to Tony Lindgren
Quoted 6 lines · Tony Lindgren

From: Uwe Kleine-König <[email protected]>

echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/unbind echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/bind

While at it move the remove function to the .devexit.text section.

Looks like I managed to trash the subject on this one, here's a fixed version.

Tony

Quoted 1 line

From f4ca1382337bfb1bf612fa07c2bb0207b1a5da37 Mon Sep 17 00:00:00 2001

From: =?utf-8?q?Uwe=20Kleine-K=C3=B6nig?= <[email protected]>
Date: Wed, 24 Sep 2008 16:13:11 +0300
Subject: [PATCH] Fix sections for omap-mcbsp platform driver
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit

Don't use __init but __devinit to define probe function. A pointer to omap_mcbsp_probe is passed to the core via platform_driver_register and so the function must not disappear when the init code is freed. Using __init and having HOTPLUG=y the following probably oopses:

echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/unbind echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/bind

While at it move the remove function to the .devexit.text section.

arch/arm/plat-omap/mcbsp.c +3 -3
index e63990f..e0803a8 100644
@@ -804,7 +804,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
  */
-static int __init omap_mcbsp_probe(struct platform_device *pdev)
+static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 {
 	struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
 	int id = pdev->id - 1;
@@ -868,7 +868,7 @@ exit:
 	return ret;
 }
 
-static int omap_mcbsp_remove(struct platform_device *pdev)
+static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 {
 	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
 
@@ -894,7 +894,7 @@ static int omap_mcbsp_remove(struct platform_device *pdev)
 
 static struct platform_driver omap_mcbsp_driver = {
 	.probe		= omap_mcbsp_probe,
-	.remove		= omap_mcbsp_remove,
+	.remove		= __devexit_p(omap_mcbsp_remove),
 	.driver		= {
 		.name	= "omap-mcbsp",
 	},
#15 lore raw

Re: [PATCH 1/5] Fix sections for omap-mcbsp platform driver

Quoted 10 lines · Tony Lindgren
Quoted 6 lines · Tony Lindgren

From: Uwe Kleine-König <[email protected]>

echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/unbind echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/bind

While at it move the remove function to the .devexit.text section.

Looks like I managed to trash the subject on this one, here's a fixed version.

Ok.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html