Skip to contentSkip to conversation

pci: introduce an ioremap_pcibar(pdev, barnr) function

PATCH In review Arjan van de Ven 6 participants 16 messages Sep 26, 2008 – Oct 1, 2008

Subsystems (27)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pci: introduce an ioremap_pcibar(pdev, barnr) function

Quoted 1 line

From abb4ec6b5b7f22904668fb5de5fe0d7a3a7fd2d5 Mon Sep 17 00:00:00 2001

From: Arjan van de Ven <[email protected]>
Date: Fri, 26 Sep 2008 16:34:52 -0700
Subject: [PATCH] pci: introduce an ioremap_pcibar(pdev, barnr) function

A common thing in many PCI drivers is to ioremap() an entire bar. This is a slightly fragile thing right now, needing both an address and a size, and many driver writers do.. various things there.

This patch introduces an ioremap_pcibar() function taking just a PCI device struct and the bar number as arguments, and figures this all out itself, in one place. In addition, we can add various sanity checks to this function (the patch already checks to make sure that the bar in question really is a MEM bar; few to no drivers do that sort of thing).

Hopefully with this type of API we get less chance of mistakes in drivers with ioremap() operations.

---
 include/linux/pci.h |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)
include/linux/pci.h +13 -0
index e48614b..65c1dbc 100644
@@ -1122,5 +1122,18 @@ static inline void pci_mmcfg_early_init(void) { }
 static inline void pci_mmcfg_late_init(void) { }
 #endif
 
+static inline void * ioremap_pcibar(struct pci_dev *pdev, int bar)
+{
+	/*
+	 * Make sure the BAR is actually a memory resource, not an IO resource
+	 */
+	if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
+		WARN_ON(1);
+		return NULL;
+	}
+	return ioremap_nocache(pci_resource_start(pdev, bar),
+				     pci_resource_len(pdev, bar));
+}
+
 #endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
Signature · 8 lines
1.5.5.1



-- 
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#1 lore raw

PATCH 1/1 pci: introduce users of ioremap_pcibar()

Quoted 1 line

From b94333809306543604f8bf23da6dddca3efac451 Mon Sep 17 00:00:00 2001

From: Arjan van de Ven <[email protected]>
Date: Fri, 26 Sep 2008 16:36:00 -0700
Subject: [PATCH] pci: introduce users of ioremap_pcibar()

one big patch for now; I'll split this up after the first review round to avoid to have to redo that many times

---
 drivers/block/sx8.c                        |    3 +--
 drivers/edac/i82875p_edac.c                |    4 +---
 drivers/i2c/busses/i2c-hydra.c             |    2 +-
 drivers/ide/pci/sgiioc4.c                  |    2 +-
 drivers/media/common/saa7146_core.c        |    3 +--
 drivers/media/video/cx23885/cx23885-core.c |    3 +--
 drivers/media/video/cx88/cx88-cards.c      |    3 +--
 drivers/mfd/sm501.c                        |    3 +--
 drivers/misc/ibmasm/module.c               |    3 +--
 drivers/misc/tifm_7xx1.c                   |    3 +--
 drivers/mmc/host/sdhci-pci.c               |    2 +-
 drivers/mtd/maps/pci.c                     |    3 +--
 drivers/net/bnx2x_main.c                   |    3 +--
 drivers/net/e1000/e1000_main.c             |    7 ++-----
 drivers/net/epic100.c                      |    2 +-
 drivers/net/ixgb/ixgb_main.c               |    3 +--
 drivers/net/qla3xxx.c                      |    4 +---
 drivers/net/s2io.c                         |    6 ++----
 drivers/net/wan/dscc4.c                    |    3 +--
 drivers/net/wan/pc300too.c                 |    2 +-
 drivers/net/wan/pci200syn.c                |    2 +-
 drivers/net/wireless/hostap/hostap_pci.c   |    2 +-
 drivers/net/wireless/ipw2200.c             |    2 +-
 drivers/net/wireless/rt2x00/rt2x00pci.c    |    3 +--
 drivers/pci/hotplug/cpcihp_zt5550.c        |    3 +--
 drivers/pci/hotplug/cpqphp_core.c          |    3 +--
 drivers/scsi/advansys.c                    |    3 +--
 drivers/scsi/arcmsr/arcmsr_hba.c           |    8 +++-----
 drivers/scsi/ipr.c                         |    2 +-
 drivers/scsi/nsp32.c                       |    3 +--
 drivers/scsi/qla1280.c                     |    3 +--
 drivers/scsi/stex.c                        |    3 +--
 drivers/serial/8250_pci.c                  |    6 ++----
 drivers/serial/icom.c                      |    3 +--
 drivers/uio/uio_cif.c                      |    3 +--
 drivers/usb/host/pci-quirks.c              |   13 +++++++------
 drivers/video/aty/aty128fb.c               |    2 +-
 drivers/video/cyber2000fb.c                |    3 +--
 drivers/video/geode/gx1fb_core.c           |    3 +--
 drivers/video/geode/gxfb_core.c            |    8 +++-----
 drivers/video/geode/lxfb_core.c            |    9 +++------
 drivers/video/gxt4500.c                    |    4 ++--
 drivers/watchdog/i6300esb.c                |    3 +--
 43 files changed, 59 insertions(+), 99 deletions(-)
drivers/block/sx8.c +1 -2
index a18e1ca..81a1fe7 100644
@@ -1625,8 +1625,7 @@ static int carm_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	for (i = 0; i < ARRAY_SIZE(host->req); i++)
 		host->req[i].tag = i;
 
-	host->mmio = ioremap(pci_resource_start(pdev, 0),
-			     pci_resource_len(pdev, 0));
+	host->mmio = ioremap_pcibar(pdev, 0);
 	if (!host->mmio) {
 		printk(KERN_ERR DRV_NAME "(%s): MMIO alloc failure\n",
 		       pci_name(pdev));
drivers/edac/i82875p_edac.c +1 -3
index e43bdc4..d1e77af 100644
@@ -312,9 +312,7 @@ static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
 	}
 
 	/* cache is irrelevant for PCI bus reads/writes */
-	window = ioremap_nocache(pci_resource_start(dev, 0),
-				 pci_resource_len(dev, 0));
-
+	window = ioremap_pcibar(dev, 0);
 	if (window == NULL) {
 		i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
 			__func__);
drivers/i2c/busses/i2c-hydra.c +1 -1
index 1098f21..9f15d78 100644
@@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev,
 				hydra_adap.name))
 		return -EBUSY;
 
-	hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0));
+	hydra_bit_data.data = ioremap_pcibar(dev, 0);
 	if (hydra_bit_data.data == NULL) {
 		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
 		return -ENODEV;
drivers/ide/pci/sgiioc4.c +1 -1
index 681306c..4e1eed7 100644
@@ -607,7 +607,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
 	bar0 = pci_resource_start(dev, 0);
-	virt_base = ioremap(bar0, pci_resource_len(dev, 0));
+	virt_base = ioremap_pcibar(dev, 0);
 	if (virt_base == NULL) {
 		printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
 				DRV_NAME, bar0);
drivers/media/common/saa7146_core.c +1 -2
index d01965e..23b6d17 100644
@@ -391,8 +391,7 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
 	if (err < 0)
 		goto err_disable;
 
-	dev->mem = ioremap(pci_resource_start(pci, 0),
-			   pci_resource_len(pci, 0));
+	dev->mem = ioremap_pcibar(pci, 0);
 	if (!dev->mem) {
 		ERR(("ioremap() failed.\n"));
 		err = -ENODEV;
drivers/media/video/cx23885/cx23885-core.c +1 -2
index 25fb099..d55da7d 100644
@@ -831,8 +831,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	}
 
 	/* PCIe stuff */
-	dev->lmmio = ioremap(pci_resource_start(dev->pci,0),
-			     pci_resource_len(dev->pci,0));
+	dev->lmmio = ioremap_pcibar(dev->pci, 0);
 
 	dev->bmmio = (u8 __iomem *)dev->lmmio;
 
drivers/media/video/cx88/cx88-cards.c +1 -2
index de199a2..3875c55 100644
@@ -2715,8 +2715,7 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
 
 	/* PCI stuff */
 	cx88_pci_quirks(core->name, pci);
-	core->lmmio = ioremap(pci_resource_start(pci, 0),
-			      pci_resource_len(pci, 0));
+	core->lmmio = ioremap_pcibar(pci, 0);
 	core->bmmio = (u8 __iomem *)core->lmmio;
 
 	/* board config */
drivers/mfd/sm501.c +1 -2
index 7aebad4..d562f41 100644
@@ -1625,8 +1625,7 @@ static int sm501_pci_probe(struct pci_dev *dev,
 		goto err3;
 	}
 
-	sm->regs = ioremap(pci_resource_start(dev, 1),
-			   pci_resource_len(dev, 1));
+	sm->regs = ioremap_pcibar(dev, 1);
 
 	if (sm->regs == NULL) {
 		dev_err(&dev->dev, "cannot remap registers\n");
drivers/misc/ibmasm/module.c +1 -2
index b5f6add..a5aca05 100644
@@ -104,8 +104,7 @@ static int __devinit ibmasm_init_one(struct pci_dev *pdev, const struct pci_devi
 	}
 
 	sp->irq = pdev->irq;
-	sp->base_address = ioremap(pci_resource_start(pdev, 0),
-					pci_resource_len(pdev, 0));
+	sp->base_address = ioremap_pcibar(pdev, 0);
 	if (!sp->base_address) {
 		dev_err(sp->dev, "Failed to ioremap pci memory\n");
 		result =  -ENODEV;
drivers/misc/tifm_7xx1.c +1 -2
index 67503ea..e2f177e 100644
@@ -354,8 +354,7 @@ static int tifm_7xx1_probe(struct pci_dev *dev,
 	fm->has_ms_pif = tifm_7xx1_has_ms_pif;
 	pci_set_drvdata(dev, fm);
 
-	fm->addr = ioremap(pci_resource_start(dev, 0),
-			   pci_resource_len(dev, 0));
+	fm->addr = ioremap_pcibar(dev, 0);
 	if (!fm->addr)
 		goto err_out_free;
 
drivers/mmc/host/sdhci-pci.c +1 -1
index fcb14c2..b8be3f1 100644
@@ -544,7 +544,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
 	}
 
 	addr = pci_resource_start(pdev, bar);
-	host->ioaddr = ioremap_nocache(addr, pci_resource_len(pdev, bar));
+	host->ioaddr = ioremap_pcibar(pdev, bar);
 	if (!host->ioaddr) {
 		dev_err(&pdev->dev, "failed to remap registers\n");
 		goto release;
drivers/mtd/maps/pci.c +1 -2
index 5c6a25c..e53612a 100644
@@ -120,8 +120,7 @@ intel_iq80310_init(struct pci_dev *dev, struct map_pci_info *map)
 	map->map.write = mtd_pci_write8,
 
 	map->map.size     = 0x00800000;
-	map->base         = ioremap_nocache(pci_resource_start(dev, 0),
-					    pci_resource_len(dev, 0));
+	map->base         = ioremap_pcibar(dev, 0);
 
 	if (!map->base)
 		return -ENOMEM;
drivers/net/bnx2x_main.c +1 -2
index a8eb3c4..2f4dd50 100644
@@ -10089,8 +10089,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 
 	dev->irq = pdev->irq;
 
-	bp->regview = ioremap_nocache(dev->base_addr,
-				      pci_resource_len(pdev, 0));
+	bp->regview = ioremap_pcibar(pdev, 0);
 	if (!bp->regview) {
 		printk(KERN_ERR PFX "Cannot map register space, aborting\n");
 		rc = -ENOMEM;
drivers/net/e1000/e1000_main.c +2 -5
index ad6da7b..617761c 100644
@@ -973,8 +973,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	hw->back = adapter;
 
 	err = -EIO;
-	hw->hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
-			      pci_resource_len(pdev, BAR_0));
+	hw->hw_addr = ioremap_pcibar(pdev, BAR_0);
 	if (!hw->hw_addr)
 		goto err_ioremap;
 
@@ -1022,9 +1021,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	 * because it depends on mac_type */
 	if ((hw->mac_type == e1000_ich8lan) &&
 	   (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
-		hw->flash_address =
-			ioremap(pci_resource_start(pdev, 1),
-				pci_resource_len(pdev, 1));
+		hw->flash_address = ioremap_pcibar(pdev, 1);
 		if (!hw->flash_address)
 			goto err_flashmap;
 	}
drivers/net/epic100.c +1 -1
index 76118dd..71e9e84 100644
@@ -364,7 +364,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 	ioaddr = pci_resource_start (pdev, 0);
 #else
 	ioaddr = pci_resource_start (pdev, 1);
-	ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1));
+	ioaddr = (long) ioremap_pcibar(pdev, 1);
 	if (!ioaddr) {
 		dev_err(&pdev->dev, "ioremap failed\n");
 		goto err_out_free_netdev;
drivers/net/ixgb/ixgb_main.c +1 -2
index aa75385..bf7553d 100644
@@ -381,8 +381,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->hw.back = adapter;
 	adapter->msg_enable = netif_msg_init(debug, DEFAULT_DEBUG_LEVEL_SHIFT);
 
-	adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
-	                              pci_resource_len(pdev, BAR_0));
+	adapter->hw.hw_addr = ioremap_pcibar(pdev, BAR_0);
 	if (!adapter->hw.hw_addr) {
 		err = -EIO;
 		goto err_ioremap;
drivers/net/qla3xxx.c +1 -3
index 3cdd07c..0a97470 100644
@@ -3978,9 +3978,7 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
 	if (qdev->device_id == QL3032_DEVICE_ID)
 		ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 
-	qdev->mem_map_registers =
-	    ioremap_nocache(pci_resource_start(pdev, 1),
-			    pci_resource_len(qdev->pdev, 1));
+	qdev->mem_map_registers = ioremap_pcibar(pdev, 1);
 	if (!qdev->mem_map_registers) {
 		printk(KERN_ERR PFX "%s: cannot map device registers\n",
 		       pci_name(pdev));
drivers/net/s2io.c +2 -4
index a2b0730..a7f7c45 100644
@@ -7921,8 +7921,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto mem_alloc_failed;
 	}
 
-	sp->bar0 = ioremap(pci_resource_start(pdev, 0),
-				     pci_resource_len(pdev, 0));
+	sp->bar0 = ioremap_pcibar(pdev, 0);
 	if (!sp->bar0) {
 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
 			  dev->name);
@@ -7930,8 +7929,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto bar0_remap_failed;
 	}
 
-	sp->bar1 = ioremap(pci_resource_start(pdev, 2),
-				     pci_resource_len(pdev, 2));
+	sp->bar1 = ioremap_pcibar(pdev, 2);
 	if (!sp->bar1) {
 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
 			  dev->name);
drivers/net/wan/dscc4.c +1 -2
index f5d55ad..a2984aa 100644
@@ -730,8 +730,7 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev,
 	        goto err_free_mmio_region_1;
 	}
 
-	ioaddr = ioremap(pci_resource_start(pdev, 0),
-					pci_resource_len(pdev, 0));
+	ioaddr = ioremap_pcibar(pdev, 0);
 	if (!ioaddr) {
 		printk(KERN_ERR "%s: cannot remap MMIO region %llx @ %llx\n",
 			DRV_NAME, (unsigned long long)pci_resource_len(pdev, 0),
drivers/net/wan/pc300too.c +1 -1
index bf1b015..a6a3234 100644
@@ -379,7 +379,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
 	card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
 
 	ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
-	card->rambase = ioremap(ramphys, pci_resource_len(pdev,3));
+	card->rambase = ioremap_pcibar(pdev, 3);
 
 	if (card->plxbase == NULL ||
 	    card->scabase == NULL ||
drivers/net/wan/pci200syn.c +1 -1
index b595b64..bb21980 100644
@@ -343,7 +343,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
 	card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);
 
 	ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
-	card->rambase = ioremap(ramphys, pci_resource_len(pdev,3));
+	card->rambase = ioremap_pcibar(pdev, 3);
 
 	if (card->plxbase == NULL ||
 	    card->scabase == NULL ||
drivers/net/wireless/hostap/hostap_pci.c +1 -1
index 3a874fc..adb4c10 100644
@@ -312,7 +312,7 @@ static int prism2_pci_probe(struct pci_dev *pdev,
 		goto err_out_disable;
 	}
 
-	mem = ioremap(phymem, pci_resource_len(pdev, 0));
+	mem = ioremap_pcibar(pdev, 0);
 	if (mem == NULL) {
 		printk(KERN_ERR "prism2: Cannot remap PCI memory region\n") ;
 		goto fail;
drivers/net/wireless/ipw2200.c +1 -1
index dcce354..22bfe83 100644
@@ -11648,7 +11648,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 	length = pci_resource_len(pdev, 0);
 	priv->hw_len = length;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0), length);
+	base = ioremap_pcibar(pdev, 0);
 	if (!base) {
 		err = -ENODEV;
 		goto out_pci_release_regions;
drivers/net/wireless/rt2x00/rt2x00pci.c +1 -2
index adf2876..7ce1abb 100644
@@ -222,8 +222,7 @@ static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
 
-	rt2x00dev->csr.base = ioremap(pci_resource_start(pci_dev, 0),
-				      pci_resource_len(pci_dev, 0));
+	rt2x00dev->csr.base = ioremap_pcibar(pci_dev, 0);
 	if (!rt2x00dev->csr.base)
 		goto exit;
 
drivers/pci/hotplug/cpcihp_zt5550.c +1 -2
index 41f6a8d..f7bc30a 100644
@@ -105,8 +105,7 @@ static int zt5550_hc_config(struct pci_dev *pdev)
 		goto exit_disable_device;
 	}
 
-	hc_registers =
-	    ioremap(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1));
+	hc_registers = ioremap_pcibar(hc_dev, 1);
 	if(!hc_registers) {
 		err("cannot remap MMIO region %llx @ %llx",
 			(unsigned long long)pci_resource_len(hc_dev, 1),
drivers/pci/hotplug/cpqphp_core.c +1 -2
index 54defec..342382b 100644
@@ -1102,8 +1102,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_bus;
 	}
 
-	ctrl->hpc_reg = ioremap(pci_resource_start(pdev, 0),
-					pci_resource_len(pdev, 0));
+	ctrl->hpc_reg = ioremap_pcibar(pdev, 0);
 	if (!ctrl->hpc_reg) {
 		err("cannot remap MMIO region %llx @ %llx\n",
 		    (unsigned long long)pci_resource_len(pdev, 0),
drivers/scsi/advansys.c +1 -2
index 218777b..00c4e27 100644
@@ -13425,8 +13425,7 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost,
 		}
 
 		boardp->asc_n_io_port = pci_resource_len(pdev, 1);
-		boardp->ioremap_addr = ioremap(pci_resource_start(pdev, 1),
-					       boardp->asc_n_io_port);
+		boardp->ioremap_addr = ioremap_pcibar(pdev, 1);
 		if (!boardp->ioremap_addr) {
 			shost_printk(KERN_ERR, shost, "ioremap(%lx, %d) "
 					"returned NULL\n",
drivers/scsi/arcmsr/arcmsr_hba.c +3 -5
index f91f79c..e522cf6 100644
@@ -235,7 +235,7 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 		uint32_t intmask_org;
 		int i, j;
 
-		acb->pmuA = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+		acb->pmuA = ioremap_pcibar(pdev, 0);
 		if (!acb->pmuA) {
 			printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n",
 							acb->host->host_no);
@@ -329,13 +329,11 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 		reg = (struct MessageUnit_B *)(dma_coherent +
 		ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock));
 		acb->pmuB = reg;
-		mem_base0 = ioremap(pci_resource_start(pdev, 0),
-					pci_resource_len(pdev, 0));
+		mem_base0 = ioremap_pcibar(pdev, 0);
 		if (!mem_base0)
 			goto out;
 
-		mem_base1 = ioremap(pci_resource_start(pdev, 2),
-					pci_resource_len(pdev, 2));
+		mem_base1 = ioremap_pcibar(pdev, 2);
 		if (!mem_base1) {
 			iounmap(mem_base0);
 			goto out;
drivers/scsi/ipr.c +1 -1
index e7a3a65..5fc4eab 100644
@@ -7478,7 +7478,7 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		goto out_scsi_host_put;
 	}
 
-	ipr_regs = ioremap(ipr_regs_pci, pci_resource_len(pdev, 0));
+	ipr_regs = ioremap_pcibar(pdev, 0);
 
 	if (!ipr_regs) {
 		dev_err(&pdev->dev,
drivers/scsi/nsp32.c +1 -2
index 22052bb..520f9e0 100644
@@ -3401,8 +3401,7 @@ static int __devinit nsp32_probe(struct pci_dev *pdev, const struct pci_device_i
 	data->IrqNumber   = pdev->irq;
 	data->BaseAddress = pci_resource_start(pdev, 0);
 	data->NumAddress  = pci_resource_len  (pdev, 0);
-	data->MmioAddress = ioremap_nocache(pci_resource_start(pdev, 1),
-					       pci_resource_len  (pdev, 1));
+	data->MmioAddress = ioremap_pcibar(pdev, 1);
 	data->MmioLength  = pci_resource_len  (pdev, 1);
 
 	pci_set_master(pdev);
drivers/scsi/qla1280.c +1 -2
index 37f9ba0..219ad65 100644
@@ -4294,8 +4294,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	error = -ENODEV;
 
 #if MEMORY_MAPPED_IO
-	ha->mmpbase = ioremap(pci_resource_start(ha->pdev, 1),
-			      pci_resource_len(ha->pdev, 1));
+	ha->mmpbase = ioremap_pcibar(ha->pdev, 1);
 	if (!ha->mmpbase) {
 		printk(KERN_INFO "qla1280: Unable to map I/O memory\n");
 		goto error_free_response_ring;
drivers/scsi/stex.c +1 -2
index 3790906..0c0fed9 100644
@@ -1108,8 +1108,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_scsi_host_put;
 	}
 
-	hba->mmio_base = ioremap_nocache(pci_resource_start(pdev, 0),
-		pci_resource_len(pdev, 0));
+	hba->mmio_base = ioremap_pcibar(pdev, 0);
 	if ( !hba->mmio_base) {
 		printk(KERN_ERR DRV_NAME "(%s): memory map failed\n",
 			pci_name(pdev));
drivers/serial/8250_pci.c +2 -4
index c2f2393..dbcebd4 100644
@@ -339,8 +339,7 @@ static int sbs_init(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
-	p = ioremap_nocache(pci_resource_start(dev, 0),
-						pci_resource_len(dev, 0));
+	p = ioremap_pcibar(dev, 0);
 
 	if (p == NULL)
 		return -ENOMEM;
@@ -364,8 +363,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
-	p = ioremap_nocache(pci_resource_start(dev, 0),
-					pci_resource_len(dev, 0));
+	p = ioremap_pcibar(dev, 0);
 	/* FIXME: What if resource_len < OCT_REG_CR_OFF */
 	if (p != NULL)
 		writeb(0, p + OCT_REG_CR_OFF);
drivers/serial/icom.c +1 -2
index 2b7531d..da19874 100644
@@ -1553,8 +1553,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
 		goto probe_exit1;
 	}
 
-	 icom_adapter->base_addr = ioremap(icom_adapter->base_addr_pci,
-						pci_resource_len(dev, 0));
+	 icom_adapter->base_addr = ioremap_pcibar(dev, 0);
 
 	if (!icom_adapter->base_addr)
 		goto probe_exit1;
drivers/uio/uio_cif.c +1 -2
index 5737606..bc907b1 100644
@@ -57,8 +57,7 @@ static int __devinit hilscher_pci_probe(struct pci_dev *dev,
 	info->mem[0].addr = pci_resource_start(dev, 0);
 	if (!info->mem[0].addr)
 		goto out_release;
-	info->mem[0].internal_addr = ioremap(pci_resource_start(dev, 0),
-					     pci_resource_len(dev, 0));
+	info->mem[0].internal_addr = ioremap_pcibar(dev, 0);
 	if (!info->mem[0].internal_addr)
 		goto out_release;
 
drivers/usb/host/pci-quirks.c +7 -6
index ae6e70e..b342669 100644
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/acpi.h>
+#include <linux/io.h>
 #include "pci-quirks.h"
 
 
@@ -172,9 +173,9 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				     pci_resource_len(pdev, 0));
-	if (base == NULL) return;
+	base = ioremap_pcibar(pdev, 0);
+	if (base == NULL)
+		return;
 
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 #ifndef __hppa__
@@ -221,9 +222,9 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
-	if (base == NULL) return;
+	base = ioremap_pcibar(pdev, 0);
+	if (base == NULL)
+		return;
 
 	cap_length = readb(base);
 	op_reg_base = base + cap_length;
drivers/video/aty/aty128fb.c +1 -1
index 243ea4a..0a8cafe 100644
@@ -2051,7 +2051,7 @@ static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_
 
 	/* Virtualize mmio region */
 	info->fix.mmio_start = reg_addr;
-	par->regbase = ioremap(reg_addr, pci_resource_len(pdev, 2));
+	par->regbase = ioremap_pcibar(pdev, 2);
 	if (!par->regbase)
 		goto err_free_info;
 
drivers/video/cyber2000fb.c +1 -2
index 41d6263..887ec8b 100644
@@ -1583,8 +1583,7 @@ cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto failed_release;
 
 	cfb->dev = dev;
-	cfb->region = ioremap(pci_resource_start(dev, 0),
-			      pci_resource_len(dev, 0));
+	cfb->region = ioremap_pcibar(dev, 0);
 	if (!cfb->region)
 		goto failed_ioremap;
 
drivers/video/geode/gx1fb_core.c +1 -2
index bb20a22..32cd9d7 100644
@@ -217,8 +217,7 @@ static int __init gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *d
 	ret = pci_request_region(dev, 0, "gx1fb (video)");
 	if (ret < 0)
 		return ret;
-	par->vid_regs = ioremap(pci_resource_start(dev, 0),
-				pci_resource_len(dev, 0));
+	par->vid_regs = ioremap_pcibar(dev, 0);
 	if (!par->vid_regs)
 		return -ENOMEM;
 
drivers/video/geode/gxfb_core.c +3 -5
index de2b8f9..bab8c8f 100644
@@ -242,23 +242,21 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de
 	ret = pci_request_region(dev, 3, "gxfb (video processor)");
 	if (ret < 0)
 		return ret;
-	par->vid_regs = ioremap(pci_resource_start(dev, 3),
-				pci_resource_len(dev, 3));
+	par->vid_regs = ioremap_pcibar(dev, 3);
 	if (!par->vid_regs)
 		return -ENOMEM;
 
 	ret = pci_request_region(dev, 2, "gxfb (display controller)");
 	if (ret < 0)
 		return ret;
-	par->dc_regs = ioremap(pci_resource_start(dev, 2), pci_resource_len(dev, 2));
+	par->dc_regs = ioremap_pcibar(dev, 2);
 	if (!par->dc_regs)
 		return -ENOMEM;
 
 	ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
 	if (ret < 0)
 		return ret;
-	par->gp_regs = ioremap(pci_resource_start(dev, 1),
-	pci_resource_len(dev, 1));
+	par->gp_regs = ioremap_pcibar(dev, 1);
 
 	if (!par->gp_regs)
 		return -ENOMEM;
drivers/video/geode/lxfb_core.c +3 -6
index 2cd9b74..9027542 100644
@@ -379,20 +379,17 @@ static int __init lxfb_map_video_memory(struct fb_info *info,
 	if (info->screen_base == NULL)
 		return ret;
 
-	par->gp_regs = ioremap(pci_resource_start(dev, 1),
-				pci_resource_len(dev, 1));
+	par->gp_regs = ioremap_pcibar(dev, 1);
 
 	if (par->gp_regs == NULL)
 		return ret;
 
-	par->dc_regs = ioremap(pci_resource_start(dev, 2),
-			       pci_resource_len(dev, 2));
+	par->dc_regs = ioremap_pcibar(dev, 2);
 
 	if (par->dc_regs == NULL)
 		return ret;
 
-	par->vp_regs = ioremap(pci_resource_start(dev, 3),
-			       pci_resource_len(dev, 3));
+	par->vp_regs = ioremap_pcibar(dev, 3);
 
 	if (par->vp_regs == NULL)
 		return ret;
drivers/video/gxt4500.c +2 -2
index 5645577..78ca660 100644
@@ -648,7 +648,7 @@ static int __devinit gxt4500_probe(struct pci_dev *pdev,
 	info->pseudo_palette = par->pseudo_palette;
 
 	info->fix.mmio_start = reg_phys;
-	par->regs = ioremap(reg_phys, pci_resource_len(pdev, 0));
+	par->regs = ioremap_pcibar(pdev, 0);
 	if (!par->regs) {
 		dev_err(&pdev->dev, "gxt4500: cannot map registers\n");
 		goto err_free_all;
@@ -656,7 +656,7 @@ static int __devinit gxt4500_probe(struct pci_dev *pdev,
 
 	info->fix.smem_start = fb_phys;
 	info->fix.smem_len = pci_resource_len(pdev, 1);
-	info->screen_base = ioremap(fb_phys, pci_resource_len(pdev, 1));
+	info->screen_base = ioremap_pcibar(pdev, 1);
 	if (!info->screen_base) {
 		dev_err(&pdev->dev, "gxt4500: cannot map framebuffer\n");
 		goto err_unmap_regs;
drivers/watchdog/i6300esb.c +1 -2
index c13383f..680e982 100644
@@ -394,8 +394,7 @@ static unsigned char __init esb_getdevice(void)
 			goto err_disable;
 		}
 
-		BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
-				   pci_resource_len(esb_pci, 0));
+		BASEADDR = ioremap_pcibar(esb_pci, 0);
 		if (BASEADDR == NULL) {
 			/* Something's wrong here, BASEADDR has to be set */
 			printk(KERN_ERR PFX "failed to get BASEADDR\n");
Signature · 8 lines
1.5.5.1



-- 
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#2 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 7 lines · Arjan van de Ven
Quoted 1 line

From b94333809306543604f8bf23da6dddca3efac451 Mon Sep 17 00:00:00 2001

From: Arjan van de Ven <[email protected]>
Date: Fri, 26 Sep 2008 16:36:00 -0700
Subject: [PATCH] pci: introduce users of ioremap_pcibar()

one big patch for now; I'll split this up after the first review round to avoid to have to redo that many times

*nod*

FTR, I like this interface better since most drivers use ioremap() instead of ioremap_nocache(). They generally should be using the latter.

Quoted 65 lines
---
 drivers/block/sx8.c                        |    3 +--
 drivers/edac/i82875p_edac.c                |    4 +---
 drivers/i2c/busses/i2c-hydra.c             |    2 +-
 drivers/ide/pci/sgiioc4.c                  |    2 +-
 drivers/media/common/saa7146_core.c        |    3 +--
 drivers/media/video/cx23885/cx23885-core.c |    3 +--
 drivers/media/video/cx88/cx88-cards.c      |    3 +--
 drivers/mfd/sm501.c                        |    3 +--
 drivers/misc/ibmasm/module.c               |    3 +--
 drivers/misc/tifm_7xx1.c                   |    3 +--
 drivers/mmc/host/sdhci-pci.c               |    2 +-
 drivers/mtd/maps/pci.c                     |    3 +--
 drivers/net/bnx2x_main.c                   |    3 +--
 drivers/net/e1000/e1000_main.c             |    7 ++-----
 drivers/net/epic100.c                      |    2 +-
 drivers/net/ixgb/ixgb_main.c               |    3 +--
 drivers/net/qla3xxx.c                      |    4 +---
 drivers/net/s2io.c                         |    6 ++----
 drivers/net/wan/dscc4.c                    |    3 +--
 drivers/net/wan/pc300too.c                 |    2 +-
 drivers/net/wan/pci200syn.c                |    2 +-
 drivers/net/wireless/hostap/hostap_pci.c   |    2 +-
 drivers/net/wireless/ipw2200.c             |    2 +-
 drivers/net/wireless/rt2x00/rt2x00pci.c    |    3 +--
 drivers/pci/hotplug/cpcihp_zt5550.c        |    3 +--
 drivers/pci/hotplug/cpqphp_core.c          |    3 +--
 drivers/scsi/advansys.c                    |    3 +--
 drivers/scsi/arcmsr/arcmsr_hba.c           |    8 +++-----
 drivers/scsi/ipr.c                         |    2 +-
 drivers/scsi/nsp32.c                       |    3 +--
 drivers/scsi/qla1280.c                     |    3 +--
 drivers/scsi/stex.c                        |    3 +--
 drivers/serial/8250_pci.c                  |    6 ++----
 drivers/serial/icom.c                      |    3 +--
 drivers/uio/uio_cif.c                      |    3 +--
 drivers/usb/host/pci-quirks.c              |   13 +++++++------
 drivers/video/aty/aty128fb.c               |    2 +-
 drivers/video/cyber2000fb.c                |    3 +--
 drivers/video/geode/gx1fb_core.c           |    3 +--
 drivers/video/geode/gxfb_core.c            |    8 +++-----
 drivers/video/geode/lxfb_core.c            |    9 +++------
 drivers/video/gxt4500.c                    |    4 ++--
 drivers/watchdog/i6300esb.c                |    3 +--
 43 files changed, 59 insertions(+), 99 deletions(-)
drivers/block/sx8.c +1 -2
index a18e1ca..81a1fe7 100644
@@ -1625,8 +1625,7 @@ static int carm_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	for (i = 0; i < ARRAY_SIZE(host->req); i++)
 		host->req[i].tag = i;
 
-	host->mmio = ioremap(pci_resource_start(pdev, 0),
-			     pci_resource_len(pdev, 0));
+	host->mmio = ioremap_pcibar(pdev, 0);
 	if (!host->mmio) {
 		printk(KERN_ERR DRV_NAME "(%s): MMIO alloc failure\n",
 		       pci_name(pdev));
drivers/edac/i82875p_edac.c +0 -0
index e43bdc4..d1e77af 100644

drivers/edac/i82875p_edac.c static int i82875p_setup_overfl_dev(struct pci_dev *pdev, · line 315

Quoted 7 lines
drivers/edac/i82875p_edac.c +1 -3
@@ -312,9 +312,7 @@ static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
 	}
 
 	/* cache is irrelevant for PCI bus reads/writes */
-	window = ioremap_nocache(pci_resource_start(dev, 0),
-				 pci_resource_len(dev, 0));
-
+	window = ioremap_pcibar(dev, 0);

Should the comment be deleted?
It made sense (sort of) for the orginal code and maybe including a comment like it in the new ioremap_pcibar() would be good.

Alternatively, the ioremap_pcibar() code needs to check for cacheable attribute and DTRT.

Quoted 62 lines
drivers/edac/i82875p_edac.c +0 -0
 	if (window == NULL) {
 		i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
 			__func__);
drivers/i2c/busses/i2c-hydra.c +1 -1
index 1098f21..9f15d78 100644
@@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev,
 				hydra_adap.name))
 		return -EBUSY;
 
-	hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0));
+	hydra_bit_data.data = ioremap_pcibar(dev, 0);
 	if (hydra_bit_data.data == NULL) {
 		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
 		return -ENODEV;
drivers/ide/pci/sgiioc4.c +1 -1
index 681306c..4e1eed7 100644
@@ -607,7 +607,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
 	bar0 = pci_resource_start(dev, 0);
-	virt_base = ioremap(bar0, pci_resource_len(dev, 0));
+	virt_base = ioremap_pcibar(dev, 0);
 	if (virt_base == NULL) {
 		printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
 				DRV_NAME, bar0);
drivers/media/common/saa7146_core.c +1 -2
index d01965e..23b6d17 100644
@@ -391,8 +391,7 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
 	if (err < 0)
 		goto err_disable;
 
-	dev->mem = ioremap(pci_resource_start(pci, 0),
-			   pci_resource_len(pci, 0));
+	dev->mem = ioremap_pcibar(pci, 0);
 	if (!dev->mem) {
 		ERR(("ioremap() failed.\n"));
 		err = -ENODEV;
drivers/media/video/cx23885/cx23885-core.c +1 -2
index 25fb099..d55da7d 100644
@@ -831,8 +831,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	}
 
 	/* PCIe stuff */
-	dev->lmmio = ioremap(pci_resource_start(dev->pci,0),
-			     pci_resource_len(dev->pci,0));
+	dev->lmmio = ioremap_pcibar(dev->pci, 0);
 
 	dev->bmmio = (u8 __iomem *)dev->lmmio;
 
drivers/media/video/cx88/cx88-cards.c +0 -0
index de199a2..3875c55 100644

drivers/media/video/cx88/cx88-cards.c struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) · line 2718

Quoted 6 lines
drivers/media/video/cx88/cx88-cards.c +1 -2
@@ -2715,8 +2715,7 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
 
 	/* PCI stuff */
 	cx88_pci_quirks(core->name, pci);
-	core->lmmio = ioremap(pci_resource_start(pci, 0),
-			      pci_resource_len(pci, 0));
+	core->lmmio = ioremap_pcibar(pci, 0);

Is there any easy way to tell if the device driver should be using uncached mappings vs cacheable mappings?
(Just from looking at the source code)

This patch changes that behavior of the device driver so it uses uncacheable instead of cacheable mappings. This is the only thing I'm uncertain about for this patch.

For storage/networking/audio cards I'm comfortable with the generalization that they all should use uncacheable mappings (I'm sure there are some exceptions.) I'm not with video devices.

I'm pretty sure this patch won't break anything. Good chance it will fix some existing drivers on platforms that really do map the BAR cacheable. But it might hurt performance on a few devices that really intended to use cacheable mappings for stuff like write coalescing.

And I have a second issue less important issue.
What is the result of ioremap_pcibar(pci, 1) when BAR0 is a 64-bit bar? Given the name, I expect to call "ioremap_pcibar(pci,2)" to get the desired result. Maybe just document how to handle this correctly in Documentation/pci.txt would be sufficient.

hth,
grant

Quoted 622 lines
drivers/media/video/cx88/cx88-cards.c +0 -0
 	core->bmmio = (u8 __iomem *)core->lmmio;
 
 	/* board config */
drivers/mfd/sm501.c +1 -2
index 7aebad4..d562f41 100644
@@ -1625,8 +1625,7 @@ static int sm501_pci_probe(struct pci_dev *dev,
 		goto err3;
 	}
 
-	sm->regs = ioremap(pci_resource_start(dev, 1),
-			   pci_resource_len(dev, 1));
+	sm->regs = ioremap_pcibar(dev, 1);
 
 	if (sm->regs == NULL) {
 		dev_err(&dev->dev, "cannot remap registers\n");
drivers/misc/ibmasm/module.c +1 -2
index b5f6add..a5aca05 100644
@@ -104,8 +104,7 @@ static int __devinit ibmasm_init_one(struct pci_dev *pdev, const struct pci_devi
 	}
 
 	sp->irq = pdev->irq;
-	sp->base_address = ioremap(pci_resource_start(pdev, 0),
-					pci_resource_len(pdev, 0));
+	sp->base_address = ioremap_pcibar(pdev, 0);
 	if (!sp->base_address) {
 		dev_err(sp->dev, "Failed to ioremap pci memory\n");
 		result =  -ENODEV;
drivers/misc/tifm_7xx1.c +1 -2
index 67503ea..e2f177e 100644
@@ -354,8 +354,7 @@ static int tifm_7xx1_probe(struct pci_dev *dev,
 	fm->has_ms_pif = tifm_7xx1_has_ms_pif;
 	pci_set_drvdata(dev, fm);
 
-	fm->addr = ioremap(pci_resource_start(dev, 0),
-			   pci_resource_len(dev, 0));
+	fm->addr = ioremap_pcibar(dev, 0);
 	if (!fm->addr)
 		goto err_out_free;
 
drivers/mmc/host/sdhci-pci.c +1 -1
index fcb14c2..b8be3f1 100644
@@ -544,7 +544,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
 	}
 
 	addr = pci_resource_start(pdev, bar);
-	host->ioaddr = ioremap_nocache(addr, pci_resource_len(pdev, bar));
+	host->ioaddr = ioremap_pcibar(pdev, bar);
 	if (!host->ioaddr) {
 		dev_err(&pdev->dev, "failed to remap registers\n");
 		goto release;
drivers/mtd/maps/pci.c +1 -2
index 5c6a25c..e53612a 100644
@@ -120,8 +120,7 @@ intel_iq80310_init(struct pci_dev *dev, struct map_pci_info *map)
 	map->map.write = mtd_pci_write8,
 
 	map->map.size     = 0x00800000;
-	map->base         = ioremap_nocache(pci_resource_start(dev, 0),
-					    pci_resource_len(dev, 0));
+	map->base         = ioremap_pcibar(dev, 0);
 
 	if (!map->base)
 		return -ENOMEM;
drivers/net/bnx2x_main.c +1 -2
index a8eb3c4..2f4dd50 100644
@@ -10089,8 +10089,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 
 	dev->irq = pdev->irq;
 
-	bp->regview = ioremap_nocache(dev->base_addr,
-				      pci_resource_len(pdev, 0));
+	bp->regview = ioremap_pcibar(pdev, 0);
 	if (!bp->regview) {
 		printk(KERN_ERR PFX "Cannot map register space, aborting\n");
 		rc = -ENOMEM;
drivers/net/e1000/e1000_main.c +2 -5
index ad6da7b..617761c 100644
@@ -973,8 +973,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	hw->back = adapter;
 
 	err = -EIO;
-	hw->hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
-			      pci_resource_len(pdev, BAR_0));
+	hw->hw_addr = ioremap_pcibar(pdev, BAR_0);
 	if (!hw->hw_addr)
 		goto err_ioremap;
 
@@ -1022,9 +1021,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	 * because it depends on mac_type */
 	if ((hw->mac_type == e1000_ich8lan) &&
 	   (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
-		hw->flash_address =
-			ioremap(pci_resource_start(pdev, 1),
-				pci_resource_len(pdev, 1));
+		hw->flash_address = ioremap_pcibar(pdev, 1);
 		if (!hw->flash_address)
 			goto err_flashmap;
 	}
drivers/net/epic100.c +1 -1
index 76118dd..71e9e84 100644
@@ -364,7 +364,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev,
 	ioaddr = pci_resource_start (pdev, 0);
 #else
 	ioaddr = pci_resource_start (pdev, 1);
-	ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1));
+	ioaddr = (long) ioremap_pcibar(pdev, 1);
 	if (!ioaddr) {
 		dev_err(&pdev->dev, "ioremap failed\n");
 		goto err_out_free_netdev;
drivers/net/ixgb/ixgb_main.c +1 -2
index aa75385..bf7553d 100644
@@ -381,8 +381,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->hw.back = adapter;
 	adapter->msg_enable = netif_msg_init(debug, DEFAULT_DEBUG_LEVEL_SHIFT);
 
-	adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
-	                              pci_resource_len(pdev, BAR_0));
+	adapter->hw.hw_addr = ioremap_pcibar(pdev, BAR_0);
 	if (!adapter->hw.hw_addr) {
 		err = -EIO;
 		goto err_ioremap;
drivers/net/qla3xxx.c +1 -3
index 3cdd07c..0a97470 100644
@@ -3978,9 +3978,7 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
 	if (qdev->device_id == QL3032_DEVICE_ID)
 		ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 
-	qdev->mem_map_registers =
-	    ioremap_nocache(pci_resource_start(pdev, 1),
-			    pci_resource_len(qdev->pdev, 1));
+	qdev->mem_map_registers = ioremap_pcibar(pdev, 1);
 	if (!qdev->mem_map_registers) {
 		printk(KERN_ERR PFX "%s: cannot map device registers\n",
 		       pci_name(pdev));
drivers/net/s2io.c +2 -4
index a2b0730..a7f7c45 100644
@@ -7921,8 +7921,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto mem_alloc_failed;
 	}
 
-	sp->bar0 = ioremap(pci_resource_start(pdev, 0),
-				     pci_resource_len(pdev, 0));
+	sp->bar0 = ioremap_pcibar(pdev, 0);
 	if (!sp->bar0) {
 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
 			  dev->name);
@@ -7930,8 +7929,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto bar0_remap_failed;
 	}
 
-	sp->bar1 = ioremap(pci_resource_start(pdev, 2),
-				     pci_resource_len(pdev, 2));
+	sp->bar1 = ioremap_pcibar(pdev, 2);
 	if (!sp->bar1) {
 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
 			  dev->name);
drivers/net/wan/dscc4.c +1 -2
index f5d55ad..a2984aa 100644
@@ -730,8 +730,7 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev,
 	        goto err_free_mmio_region_1;
 	}
 
-	ioaddr = ioremap(pci_resource_start(pdev, 0),
-					pci_resource_len(pdev, 0));
+	ioaddr = ioremap_pcibar(pdev, 0);
 	if (!ioaddr) {
 		printk(KERN_ERR "%s: cannot remap MMIO region %llx @ %llx\n",
 			DRV_NAME, (unsigned long long)pci_resource_len(pdev, 0),
drivers/net/wan/pc300too.c +1 -1
index bf1b015..a6a3234 100644
@@ -379,7 +379,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
 	card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
 
 	ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
-	card->rambase = ioremap(ramphys, pci_resource_len(pdev,3));
+	card->rambase = ioremap_pcibar(pdev, 3);
 
 	if (card->plxbase == NULL ||
 	    card->scabase == NULL ||
drivers/net/wan/pci200syn.c +1 -1
index b595b64..bb21980 100644
@@ -343,7 +343,7 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
 	card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);
 
 	ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
-	card->rambase = ioremap(ramphys, pci_resource_len(pdev,3));
+	card->rambase = ioremap_pcibar(pdev, 3);
 
 	if (card->plxbase == NULL ||
 	    card->scabase == NULL ||
drivers/net/wireless/hostap/hostap_pci.c +1 -1
index 3a874fc..adb4c10 100644
@@ -312,7 +312,7 @@ static int prism2_pci_probe(struct pci_dev *pdev,
 		goto err_out_disable;
 	}
 
-	mem = ioremap(phymem, pci_resource_len(pdev, 0));
+	mem = ioremap_pcibar(pdev, 0);
 	if (mem == NULL) {
 		printk(KERN_ERR "prism2: Cannot remap PCI memory region\n") ;
 		goto fail;
drivers/net/wireless/ipw2200.c +1 -1
index dcce354..22bfe83 100644
@@ -11648,7 +11648,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 	length = pci_resource_len(pdev, 0);
 	priv->hw_len = length;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0), length);
+	base = ioremap_pcibar(pdev, 0);
 	if (!base) {
 		err = -ENODEV;
 		goto out_pci_release_regions;
drivers/net/wireless/rt2x00/rt2x00pci.c +1 -2
index adf2876..7ce1abb 100644
@@ -222,8 +222,7 @@ static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
 
-	rt2x00dev->csr.base = ioremap(pci_resource_start(pci_dev, 0),
-				      pci_resource_len(pci_dev, 0));
+	rt2x00dev->csr.base = ioremap_pcibar(pci_dev, 0);
 	if (!rt2x00dev->csr.base)
 		goto exit;
 
drivers/pci/hotplug/cpcihp_zt5550.c +1 -2
index 41f6a8d..f7bc30a 100644
@@ -105,8 +105,7 @@ static int zt5550_hc_config(struct pci_dev *pdev)
 		goto exit_disable_device;
 	}
 
-	hc_registers =
-	    ioremap(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1));
+	hc_registers = ioremap_pcibar(hc_dev, 1);
 	if(!hc_registers) {
 		err("cannot remap MMIO region %llx @ %llx",
 			(unsigned long long)pci_resource_len(hc_dev, 1),
drivers/pci/hotplug/cpqphp_core.c +1 -2
index 54defec..342382b 100644
@@ -1102,8 +1102,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_bus;
 	}
 
-	ctrl->hpc_reg = ioremap(pci_resource_start(pdev, 0),
-					pci_resource_len(pdev, 0));
+	ctrl->hpc_reg = ioremap_pcibar(pdev, 0);
 	if (!ctrl->hpc_reg) {
 		err("cannot remap MMIO region %llx @ %llx\n",
 		    (unsigned long long)pci_resource_len(pdev, 0),
drivers/scsi/advansys.c +1 -2
index 218777b..00c4e27 100644
@@ -13425,8 +13425,7 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost,
 		}
 
 		boardp->asc_n_io_port = pci_resource_len(pdev, 1);
-		boardp->ioremap_addr = ioremap(pci_resource_start(pdev, 1),
-					       boardp->asc_n_io_port);
+		boardp->ioremap_addr = ioremap_pcibar(pdev, 1);
 		if (!boardp->ioremap_addr) {
 			shost_printk(KERN_ERR, shost, "ioremap(%lx, %d) "
 					"returned NULL\n",
drivers/scsi/arcmsr/arcmsr_hba.c +3 -5
index f91f79c..e522cf6 100644
@@ -235,7 +235,7 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 		uint32_t intmask_org;
 		int i, j;
 
-		acb->pmuA = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+		acb->pmuA = ioremap_pcibar(pdev, 0);
 		if (!acb->pmuA) {
 			printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n",
 							acb->host->host_no);
@@ -329,13 +329,11 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 		reg = (struct MessageUnit_B *)(dma_coherent +
 		ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock));
 		acb->pmuB = reg;
-		mem_base0 = ioremap(pci_resource_start(pdev, 0),
-					pci_resource_len(pdev, 0));
+		mem_base0 = ioremap_pcibar(pdev, 0);
 		if (!mem_base0)
 			goto out;
 
-		mem_base1 = ioremap(pci_resource_start(pdev, 2),
-					pci_resource_len(pdev, 2));
+		mem_base1 = ioremap_pcibar(pdev, 2);
 		if (!mem_base1) {
 			iounmap(mem_base0);
 			goto out;
drivers/scsi/ipr.c +1 -1
index e7a3a65..5fc4eab 100644
@@ -7478,7 +7478,7 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		goto out_scsi_host_put;
 	}
 
-	ipr_regs = ioremap(ipr_regs_pci, pci_resource_len(pdev, 0));
+	ipr_regs = ioremap_pcibar(pdev, 0);
 
 	if (!ipr_regs) {
 		dev_err(&pdev->dev,
drivers/scsi/nsp32.c +1 -2
index 22052bb..520f9e0 100644
@@ -3401,8 +3401,7 @@ static int __devinit nsp32_probe(struct pci_dev *pdev, const struct pci_device_i
 	data->IrqNumber   = pdev->irq;
 	data->BaseAddress = pci_resource_start(pdev, 0);
 	data->NumAddress  = pci_resource_len  (pdev, 0);
-	data->MmioAddress = ioremap_nocache(pci_resource_start(pdev, 1),
-					       pci_resource_len  (pdev, 1));
+	data->MmioAddress = ioremap_pcibar(pdev, 1);
 	data->MmioLength  = pci_resource_len  (pdev, 1);
 
 	pci_set_master(pdev);
drivers/scsi/qla1280.c +1 -2
index 37f9ba0..219ad65 100644
@@ -4294,8 +4294,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	error = -ENODEV;
 
 #if MEMORY_MAPPED_IO
-	ha->mmpbase = ioremap(pci_resource_start(ha->pdev, 1),
-			      pci_resource_len(ha->pdev, 1));
+	ha->mmpbase = ioremap_pcibar(ha->pdev, 1);
 	if (!ha->mmpbase) {
 		printk(KERN_INFO "qla1280: Unable to map I/O memory\n");
 		goto error_free_response_ring;
drivers/scsi/stex.c +1 -2
index 3790906..0c0fed9 100644
@@ -1108,8 +1108,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_scsi_host_put;
 	}
 
-	hba->mmio_base = ioremap_nocache(pci_resource_start(pdev, 0),
-		pci_resource_len(pdev, 0));
+	hba->mmio_base = ioremap_pcibar(pdev, 0);
 	if ( !hba->mmio_base) {
 		printk(KERN_ERR DRV_NAME "(%s): memory map failed\n",
 			pci_name(pdev));
drivers/serial/8250_pci.c +2 -4
index c2f2393..dbcebd4 100644
@@ -339,8 +339,7 @@ static int sbs_init(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
-	p = ioremap_nocache(pci_resource_start(dev, 0),
-						pci_resource_len(dev, 0));
+	p = ioremap_pcibar(dev, 0);
 
 	if (p == NULL)
 		return -ENOMEM;
@@ -364,8 +363,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
-	p = ioremap_nocache(pci_resource_start(dev, 0),
-					pci_resource_len(dev, 0));
+	p = ioremap_pcibar(dev, 0);
 	/* FIXME: What if resource_len < OCT_REG_CR_OFF */
 	if (p != NULL)
 		writeb(0, p + OCT_REG_CR_OFF);
drivers/serial/icom.c +1 -2
index 2b7531d..da19874 100644
@@ -1553,8 +1553,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
 		goto probe_exit1;
 	}
 
-	 icom_adapter->base_addr = ioremap(icom_adapter->base_addr_pci,
-						pci_resource_len(dev, 0));
+	 icom_adapter->base_addr = ioremap_pcibar(dev, 0);
 
 	if (!icom_adapter->base_addr)
 		goto probe_exit1;
drivers/uio/uio_cif.c +1 -2
index 5737606..bc907b1 100644
@@ -57,8 +57,7 @@ static int __devinit hilscher_pci_probe(struct pci_dev *dev,
 	info->mem[0].addr = pci_resource_start(dev, 0);
 	if (!info->mem[0].addr)
 		goto out_release;
-	info->mem[0].internal_addr = ioremap(pci_resource_start(dev, 0),
-					     pci_resource_len(dev, 0));
+	info->mem[0].internal_addr = ioremap_pcibar(dev, 0);
 	if (!info->mem[0].internal_addr)
 		goto out_release;
 
drivers/usb/host/pci-quirks.c +7 -6
index ae6e70e..b342669 100644
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/acpi.h>
+#include <linux/io.h>
 #include "pci-quirks.h"
 
 
@@ -172,9 +173,9 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				     pci_resource_len(pdev, 0));
-	if (base == NULL) return;
+	base = ioremap_pcibar(pdev, 0);
+	if (base == NULL)
+		return;
 
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 #ifndef __hppa__
@@ -221,9 +222,9 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
-	if (base == NULL) return;
+	base = ioremap_pcibar(pdev, 0);
+	if (base == NULL)
+		return;
 
 	cap_length = readb(base);
 	op_reg_base = base + cap_length;
drivers/video/aty/aty128fb.c +1 -1
index 243ea4a..0a8cafe 100644
@@ -2051,7 +2051,7 @@ static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_
 
 	/* Virtualize mmio region */
 	info->fix.mmio_start = reg_addr;
-	par->regbase = ioremap(reg_addr, pci_resource_len(pdev, 2));
+	par->regbase = ioremap_pcibar(pdev, 2);
 	if (!par->regbase)
 		goto err_free_info;
 
drivers/video/cyber2000fb.c +1 -2
index 41d6263..887ec8b 100644
@@ -1583,8 +1583,7 @@ cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto failed_release;
 
 	cfb->dev = dev;
-	cfb->region = ioremap(pci_resource_start(dev, 0),
-			      pci_resource_len(dev, 0));
+	cfb->region = ioremap_pcibar(dev, 0);
 	if (!cfb->region)
 		goto failed_ioremap;
 
drivers/video/geode/gx1fb_core.c +1 -2
index bb20a22..32cd9d7 100644
@@ -217,8 +217,7 @@ static int __init gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *d
 	ret = pci_request_region(dev, 0, "gx1fb (video)");
 	if (ret < 0)
 		return ret;
-	par->vid_regs = ioremap(pci_resource_start(dev, 0),
-				pci_resource_len(dev, 0));
+	par->vid_regs = ioremap_pcibar(dev, 0);
 	if (!par->vid_regs)
 		return -ENOMEM;
 
drivers/video/geode/gxfb_core.c +3 -5
index de2b8f9..bab8c8f 100644
@@ -242,23 +242,21 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de
 	ret = pci_request_region(dev, 3, "gxfb (video processor)");
 	if (ret < 0)
 		return ret;
-	par->vid_regs = ioremap(pci_resource_start(dev, 3),
-				pci_resource_len(dev, 3));
+	par->vid_regs = ioremap_pcibar(dev, 3);
 	if (!par->vid_regs)
 		return -ENOMEM;
 
 	ret = pci_request_region(dev, 2, "gxfb (display controller)");
 	if (ret < 0)
 		return ret;
-	par->dc_regs = ioremap(pci_resource_start(dev, 2), pci_resource_len(dev, 2));
+	par->dc_regs = ioremap_pcibar(dev, 2);
 	if (!par->dc_regs)
 		return -ENOMEM;
 
 	ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
 	if (ret < 0)
 		return ret;
-	par->gp_regs = ioremap(pci_resource_start(dev, 1),
-	pci_resource_len(dev, 1));
+	par->gp_regs = ioremap_pcibar(dev, 1);
 
 	if (!par->gp_regs)
 		return -ENOMEM;
drivers/video/geode/lxfb_core.c +3 -6
index 2cd9b74..9027542 100644
@@ -379,20 +379,17 @@ static int __init lxfb_map_video_memory(struct fb_info *info,
 	if (info->screen_base == NULL)
 		return ret;
 
-	par->gp_regs = ioremap(pci_resource_start(dev, 1),
-				pci_resource_len(dev, 1));
+	par->gp_regs = ioremap_pcibar(dev, 1);
 
 	if (par->gp_regs == NULL)
 		return ret;
 
-	par->dc_regs = ioremap(pci_resource_start(dev, 2),
-			       pci_resource_len(dev, 2));
+	par->dc_regs = ioremap_pcibar(dev, 2);
 
 	if (par->dc_regs == NULL)
 		return ret;
 
-	par->vp_regs = ioremap(pci_resource_start(dev, 3),
-			       pci_resource_len(dev, 3));
+	par->vp_regs = ioremap_pcibar(dev, 3);
 
 	if (par->vp_regs == NULL)
 		return ret;
drivers/video/gxt4500.c +2 -2
index 5645577..78ca660 100644
@@ -648,7 +648,7 @@ static int __devinit gxt4500_probe(struct pci_dev *pdev,
 	info->pseudo_palette = par->pseudo_palette;
 
 	info->fix.mmio_start = reg_phys;
-	par->regs = ioremap(reg_phys, pci_resource_len(pdev, 0));
+	par->regs = ioremap_pcibar(pdev, 0);
 	if (!par->regs) {
 		dev_err(&pdev->dev, "gxt4500: cannot map registers\n");
 		goto err_free_all;
@@ -656,7 +656,7 @@ static int __devinit gxt4500_probe(struct pci_dev *pdev,
 
 	info->fix.smem_start = fb_phys;
 	info->fix.smem_len = pci_resource_len(pdev, 1);
-	info->screen_base = ioremap(fb_phys, pci_resource_len(pdev, 1));
+	info->screen_base = ioremap_pcibar(pdev, 1);
 	if (!info->screen_base) {
 		dev_err(&pdev->dev, "gxt4500: cannot map framebuffer\n");
 		goto err_unmap_regs;
drivers/watchdog/i6300esb.c +1 -2
index c13383f..680e982 100644
@@ -394,8 +394,7 @@ static unsigned char __init esb_getdevice(void)
 			goto err_disable;
 		}
 
-		BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
-				   pci_resource_len(esb_pci, 0));
+		BASEADDR = ioremap_pcibar(esb_pci, 0);
 		if (BASEADDR == NULL) {
 			/* Something's wrong here, BASEADDR has to be set */
 			printk(KERN_ERR PFX "failed to get BASEADDR\n");
Signature · 12 lines
1.5.5.1



-- 
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#3 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 2 lines

FTR, I like this interface better since most drivers use ioremap() instead of ioremap_nocache(). They generally should be using the latter.

And pci_iomap is cleaner still. Plus pcim_iomap does resource tracking so all the masses of special case error code/cleanup can get cut down.

Quoted 3 lines

Is there any easy way to tell if the device driver should be using uncached mappings vs cacheable mappings?
(Just from looking at the source code)

There isn't one.

Quoted 3 lines

For storage/networking/audio cards I'm comfortable with the generalization that they all should use uncacheable mappings (I'm sure there are some exceptions.) I'm not with video devices.

There are exceptions - I2O for example and there are other cards that use write merging when possible beyond video. Also btw vidoe depends on the chip - if you cache/write merge the framebuffer on a Voodoo 1/2 card you must be in 24/32bit video modes for example.

Generally though PCI = controlled by hardware = uncached

Alan

#4 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

In reply to Grant Grundler
Quoted 3 lines · On Mon, 29 Sep 2008 01:26:43 -0600 Grant Grundler <[email protected]>…

Alternatively, the ioremap_pcibar() code needs to check for cacheable attribute and DTRT.

we should make it "if prefetchable, UC-, if not, hard UC", yes.

Quoted 11 lines

drivers/media/video/cx88/cx88-cards.c struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) · line 2718

Quoted 3 lines
drivers/media/video/cx88/cx88-cards.c +1 -2
-	core->lmmio = ioremap(pci_resource_start(pci, 0),
-			      pci_resource_len(pci, 0));
+	core->lmmio = ioremap_pcibar(pci, 0);

Is there any easy way to tell if the device driver should be using uncached mappings vs cacheable mappings?
(Just from looking at the source code)

This patch changes that behavior of the device driver so it uses uncacheable instead of cacheable mappings. This is the only thing I'm uncertain about for this patch.

ioremap() also is uncachable today.

Quoted 6 lines

And I have a second issue less important issue.
What is the result of ioremap_pcibar(pci, 1) when BAR0 is a 64-bit bar? Given the name, I expect to call "ioremap_pcibar(pci,2)" to get the desired result. Maybe just document how to handle this correctly in Documentation/pci.txt would be sufficient.

we should detect this and DTRT inside the implementation, not in the drivers.

Signature · 3 lines
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#5 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

On Mon, Sep 29, 2008 at 06:42:20AM -0700, Arjan van de Ven wrote:
...

Quoted 5 lines
Quoted 3 lines

This patch changes that behavior of the device driver so it uses uncacheable instead of cacheable mappings. This is the only thing I'm uncertain about for this patch.

ioremap() also is uncachable today.

Ok...it was using cacheable mapping on ia64 until this commit in 2007:

    http://www.gelato.unsw.edu.au/archives/linux-ia64/0703/20211.html

I stopped paying close attention on ia64 in 2006 for the most part. It's always been uncacheable on parisc.

After finding willy's patch (March 2006) on lwn.net, I remember the discussion around changing the behavior of ioremap() to be uncached:

    http://lwn.net/Articles/178084/

And I have to agree with willy/alan, pci_iomap() is already doing this.

However, pci_iomap() isn't quite right either:

        if (flags & IORESOURCE_MEM) {
                if (flags & IORESOURCE_CACHEABLE)
                        return ioremap(start, len);
                return ioremap_nocache(start, len);
        }

I expect it needs to use ioremap_cache() instead of ioremap(). One line patch below fixes that. Build-tested on x86 only.

Quoted 8 lines
Quoted 5 lines

And I have a second issue less important issue.
What is the result of ioremap_pcibar(pci, 1) when BAR0 is a 64-bit bar? Given the name, I expect to call "ioremap_pcibar(pci,2)" to get the desired result. Maybe just document how to handle this correctly in Documentation/pci.txt would be sufficient.

we should detect this and DTRT inside the implementation, not in the drivers.

pci_iomap() is already doing this. See lib/iomap.c:pci_iomap().

thanks,
grant

lib/iomap.c +1 -1
index d322293..5565cf9 100644
@@ -267,7 +267,7 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 		return ioport_map(start, len);
 	if (flags & IORESOURCE_MEM) {
 		if (flags & IORESOURCE_CACHEABLE)
-			return ioremap(start, len);
+			return ioremap_cache(start, len);
 		return ioremap_nocache(start, len);
 	}
 	/* What? */
#6 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 2 lines · On Mon, 29 Sep 2008 11:10:49 -0600 Grant Grundler <[email protected]>…

And I have to agree with willy/alan, pci_iomap() is already doing this.

pci_iomap() does "stuff" but it assumes you're using the iomap APIs across the driver. MANY don't.

And pci_iomap() takes more parameters than most driver writers want or need. Most of the time it's "I want the whole bar"; even if my patch wraps around that, making the API simpler is still worth it imo

#7 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 8 lines · Arjan van de Ven
Quoted 2 lines · On Mon, 29 Sep 2008 11:10:49 -0600 Grant Grundler <[email protected]>…

And I have to agree with willy/alan, pci_iomap() is already doing this.

pci_iomap() does "stuff" but it assumes you're using the iomap APIs across the driver. MANY don't.

pci_iomap() returns a "void __iomem *". readl/writel take "void __iomem *" as an argument. See build_mmio_read() in include/asm-x86/io.h

I think the assumption is the other way around: use of ioread/iowrite assumes use of io_remap(). pci_iomap is the PCI wrapper around io_remap(). You just want a simpler wrapper (and I agree, it really could without the extra arg).

But in any case, we can document pci_iomap() to be whatever you think we should be exporting. pci_iomap() is not currently documented in Documentation/. Or at least grep isn't seeing it.

Quoted 3 lines

And pci_iomap() takes more parameters than most driver writers want or need. Most of the time it's "I want the whole bar"; even if my patch wraps around that, making the API simpler is still worth it imo

You are right about that.
Would calling the API "pci_iomap_bar()" to keep the naming consistent help make it more acceptable?

(And adding documentation for both would be good too...I can do that if the new API gets accepted.)

hth,
grant

#8 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 9 lines · On Tue, 30 Sep 2008 23:24:50 -0600 Grant Grundler <[email protected]>…
Quoted 5 lines

And pci_iomap() takes more parameters than most driver writers want or need. Most of the time it's "I want the whole bar"; even if my patch wraps around that, making the API simpler is still worth it imo

You are right about that.
Would calling the API "pci_iomap_bar()" to keep the naming consistent help make it more acceptable?

I'm fine with pci_iomap_bar()... it meets my goals
Would be nice if I'd be allowed to make it only work on MEM bars not IO bars (so that drivers don't accidentally end up calling this on an IO bar and then using readl() etc)

Signature · 3 lines
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#9 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 8 lines · Arjan van de Ven

On Tue, 30 Sep 2008 23:24:50 -0600

Quoted 5 lines · Grant Grundler
Quoted 4 lines

And pci_iomap() takes more parameters than most driver writers want or need. Most of the time it's "I want the whole bar"; even if my patch wraps around that, making the API simpler is still worth it imo

Quoted 8 lines
Quoted 3 lines

You are right about that.
Would calling the API "pci_iomap_bar()" to keep the naming consistent help make it more acceptable?

I'm fine with pci_iomap_bar()... it meets my goals
Would be nice if I'd be allowed to make it only work on MEM bars not IO bars (so that drivers don't accidentally end up calling this on an IO bar and then using readl() etc)

IIRC pci_iomap() was documented to work on both at it does "the right thing" automatically.

Eike

#10 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

In reply to Arjan van de Ven
Quoted 9 lines · Arjan van de Ven
Quoted 6 lines · On Tue, 30 Sep 2008 23:24:50 -0600 Grant Grundler <[email protected]>…
Quoted 5 lines

And pci_iomap() takes more parameters than most driver writers want or need. Most of the time it's "I want the whole bar"; even if my patch wraps around that, making the API simpler is still worth it imo

Quoted 9 lines
Quoted 3 lines

You are right about that.
Would calling the API "pci_iomap_bar()" to keep the naming consistent help make it more acceptable?

I'm fine with pci_iomap_bar()... it meets my goals
Would be nice if I'd be allowed to make it only work on MEM bars not IO bars (so that drivers don't accidentally end up calling this on an IO bar and then using readl() etc)

If they use the iomap interface they shouldn't be using readl at all, they should be using ioread*... It would be a bug otherwise.

cheers, Kyle

#11 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 8 lines · Kyle McMartin
Quoted 4 lines · Arjan van de Ven

I'm fine with pci_iomap_bar()... it meets my goals
Would be nice if I'd be allowed to make it only work on MEM bars not IO bars (so that drivers don't accidentally end up calling this on an IO bar and then using readl() etc)

If they use the iomap interface they shouldn't be using readl at all, they should be using ioread*... It would be a bug otherwise.

That's a viewpoint I've heard several people espouse over the last few days, but it's not (entirely) true. Addresses returned from calling iomap() on a memory location must be compatible with addresses returned from calling ioremap(), so you can use readl() on an iomap address, as long as you know that it was a memory address that was iomapped.

        if (flags & IORESOURCE_MEM) {
                if (flags & IORESOURCE_CACHEABLE)
                        return ioremap(start, len);
                return ioremap_nocache(start, len);
        }

OK, not all architectures use the generic code, but I've been through and they all do more or less the above (mn10300 and frv just return the address, but their readl() and inl() are identical)

Signature · 4 lines
Matthew Wilcox				Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours.  We can't possibly take such
a retrograde step."
#12 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 15 lines · Matthew Wilcox
Quoted 2 lines

If they use the iomap interface they shouldn't be using readl at all, they should be using ioread*... It would be a bug otherwise.

That's a viewpoint I've heard several people espouse over the last few days, but it's not (entirely) true. Addresses returned from calling iomap() on a memory location must be compatible with addresses returned from calling ioremap(), so you can use readl() on an iomap address, as long as you know that it was a memory address that was iomapped.

        if (flags & IORESOURCE_MEM) {
                if (flags & IORESOURCE_CACHEABLE)
                        return ioremap(start, len);
                return ioremap_nocache(start, len);
        }
Quoted 4 lines

OK, not all architectures use the generic code, but I've been through and they all do more or less the above (mn10300 and frv just return the address, but their readl() and inl() are identical)

I don't recall anyone ever promising that the iomap interfaces would be usable with legacy accessors. I'd certainly prefer it if we didn't, as well, as it makes for more explicitly written drivers...

Just because you can use them, doesn't mean you should.

regards, Kyle

#13 lore raw

Re: [PATCH] pci: introduce users of ioremap_pcibar()

Quoted 6 lines · On Wed, 1 Oct 2008 09:07:17 -0400 Kyle McMartin <[email protected]> wrote:
Quoted 5 lines

OK, not all architectures use the generic code, but I've been through and they all do more or less the above (mn10300 and frv just return the address, but their readl() and inl() are identical)

Quoted 6 lines

I don't recall anyone ever promising that the iomap interfaces would be usable with legacy accessors. I'd certainly prefer it if we didn't, as well, as it makes for more explicitly written drivers...

Just because you can use them, doesn't mean you should.

ok so now we're full circle.
I started with a real ioremap, was told "no must use iomap" despite the same argument you make, and now we're back to square one.

What I want is an interface that can replace ioremap() for the common "I want the bar uncached" case. Nothing more nothing less.... sigh.

Signature · 3 lines
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#14 lore raw
In reply to Arjan van de Ven
Quoted 9 lines · Arjan van de Ven

A common thing in many PCI drivers is to ioremap() an entire bar. This is a slightly fragile thing right now, needing both an address and a size, and many driver writers do.. various things there.

This patch introduces an ioremap_pcibar() function taking just a PCI device struct and the bar number as arguments, and figures this all out itself, in one place. In addition, we can add various sanity checks to this function (the patch already checks to make sure that the bar in question really is a MEM bar; few to no drivers do that sort of thing).

So we already have a pci_iomap() which takes a 'max' argument. If you make 'max' -1, don't you get this same behaviour?

Signature · 4 lines
Matthew Wilcox				Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours.  We can't possibly take such
a retrograde step."
#15 lore raw
Quoted 12 lines · On Fri, 26 Sep 2008 20:56:14 -0600 Matthew Wilcox <[email protected]> wrote:
Quoted 10 lines · Arjan van de Ven

A common thing in many PCI drivers is to ioremap() an entire bar. This is a slightly fragile thing right now, needing both an address and a size, and many driver writers do.. various things there.

This patch introduces an ioremap_pcibar() function taking just a PCI device struct and the bar number as arguments, and figures this all out itself, in one place. In addition, we can add various sanity checks to this function (the patch already checks to make sure that the bar in question really is a MEM bar; few to no drivers do that sort of thing).

Quoted 2 lines

So we already have a pci_iomap() which takes a 'max' argument. If you make 'max' -1, don't you get this same behaviour?

there are many ways to map a bar... I'm just arguing for providing a really simple, hard-to-get-wrong, one which only takes a device and a bar number.
The goal of my patch isn't to introduce new functionality per se (although having the ability to add checks is nice and welcome), it's mostly to provide a simple, hard-to-get-wrong interface. Less chance to get it wrong -> less hard to diagnose bugs.

Signature · 3 lines
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org