sh: GPIO for SuperH using gpiolib
cover sh: GPIO for SuperH using gpiolib
Pinmuxed GPIO support for SuperH using gpiolib
[PATCH 01/05] sh: Add GPIO and pinmux base code [PATCH 02/05] sh: Add sh7722 pinmux tables [PATCH 03/05] sh: Use sh7722 GPIO on Migo-R board [PATCH 04/05] sh: Add sh7723 pinmux tables [PATCH 05/05] sh: Use sh7723 GPIO on AP325RXA board
These patches add support for GPIO to SuperH. The regular GPIO operations are all supported for configuring and reading/writing pin data. IRQs are not supported at this point.
The main feature of this patchset is the table based pinmux code. So far the pinmux hardware has been configured by the board code by hand, using pinmux register values. This is both slow and error prone. The table based pinmux code give users a nice abstraction and allows them to describe their hardware configuration pin by pin and let the pinmux code handle the details such as register layout and dependencies.
The pinmux code is written so multiple GPIOs map to one physical pin. So for example on sh7723, pin PTS5 can be accessed as regular Port S pin 5 GPIO, but it can also be locked to two different functions - as TX pin of the SCIF1 serial port or as SDHI0D3 - a D3 pin on the first MMC interface.
This specific PTS5 pin is exported as 3 different GPIOs:GPIO_PTS5GPIO_FN_SCIF1_PTS_TXDGPIO_FN_SDHI0D3_PTS
Only one at a time can be selected using gpio_request().
These patches include support for sh7722/Migo-R and sh7723/AP325RXA hardware.
---
arch/sh/Kconfig | 3 arch/sh/boards/Kconfig | 2 arch/sh/boards/board-ap325rxa.c | 100 + arch/sh/boards/mach-migor/lcd_qvga.c | 6 arch/sh/boards/mach-migor/setup.c | 185 +-- arch/sh/include/asm/gpio.h | 118 + arch/sh/include/asm/sh7722.h | 210 +++ arch/sh/include/asm/sh7723.h | 254 ++++ arch/sh/kernel/Makefile_32 | 1 arch/sh/kernel/Makefile_64 | 1 arch/sh/kernel/cpu/sh4a/Makefile | 5 arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 1776 ++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 1909 +++++++++++++++++++++++++++++++ arch/sh/kernel/gpio.c | 436 +++++++ 14 files changed, 4903 insertions(+), 103 deletions(-)
Quoted 8 lines · Magnus Damm
Pinmuxed GPIO support for SuperH using gpiolib
[PATCH 01/05] sh: Add GPIO and pinmux base code [PATCH 02/05] sh: Add sh7722 pinmux tables [PATCH 03/05] sh: Use sh7722 GPIO on Migo-R board [PATCH 04/05] sh: Add sh7723 pinmux tables [PATCH 05/05] sh: Use sh7723 GPIO on AP325RXA board
Quoted 4 lines
These patches add support for GPIO to SuperH. The regular GPIO operations are all supported for configuring and reading/writing pin data. IRQs are not supported at this point.
Ok, with a bit of tidying, I've checked this in to the sh/gpiolib topic branch. I note that this depends on David's request/free hooks, so I'm not able to merge it until there is a resolution there.
Quoted 4 lines · Magnus Damm
The pinmux code is written so multiple GPIOs map to one physical pin. So for example on sh7723, pin PTS5 can be accessed as regular Port S pin 5 GPIO, but it can also be locked to two different functions - as TX pin of the SCIF1 serial port or as SDHI0D3 - a D3 pin on the first MMC interface.
I've lost track of the status of these patches, but as a terminology point I think it's best to keep in mind that those alternate functions are not what's called a "GPIO". The GPIO framework only expects to handle the first function -- "GPIO".
Quoted 6 lines
This specific PTS5 pin is exported as 3 different GPIOs:
GPIO_PTS5GPIO_FN_SCIF1_PTS_TXDGPIO_FN_SDHI0D3_PTS
Only one at a time can be selected usinggpio_request().
Quoted 4 lines · Paul Mundt
Ok, with a bit of tidying, I've checked this in to the sh/gpiolib topic branch. I note that this depends on David's request/free hooks, so I'm not able to merge it until there is a resolution there.
They're in mainline now, since the middle of last week ISTR...