hwmon: LM96000 support

1/1

diff -NurpP --minimal linux-2.6.27-rc8-khali/Documentation/hwmon/lm85 linux-2.6.27-rc8-khali-lm96k-v0.1/Documentation/hwmon/lm85
@@ -189,6 +189,22 @@ Configuration choices:
      -1    PWM always 100%  (full on)
      -2    Manual control (write to 'pwm#' to set)
 
+* PWM Tachometer Monitor Mode
+
+* pwm#_tmm - controls the monitor mode for pwm#
+
+Configuration choices:
+
+   Value     Meaning                                 <min
+  ------  ----------------------------------------  ------
+      0    Traditional tach input monitor             any   
+      1    Traditional tach input monitor            FFFFh
+      2    Most accurate readings                    FFFFh
+      3    Least effect on programmed PWM of Fan     FFFFh
+
+In the default setting, you will get false readings when under 
+minimum detctable RPM, in all other modes FFFFh.
+
 The National LM85's have two vendor specific configuration
 features. Tach. mode and Spinup Control. For more details on these,
 see the LM85 datasheet or Application Note AN-1260. These features


Herbert Poetzl