ide-cd: debug log enhancements
cover ide-cd: debug log enhancements
Hi Bart,
here are some trivial enhancements to ide-cd which resulted from the debugging sessions lately.
drivers/ide/ide-cd.c | 44 ++++++++++++++++++++++++++------------------ 1 files changed, 26 insertions(+), 18 deletions(-)
PATCH 1/3 ide-cd: debug log enhancements
Add some more verbosity to key function calls in ide-cd debug code. While at it, delete a superfluous comment.
--- drivers/ide/ide-cd.c | 33 +++++++++++++++++++++------------ 1 files changed, 21 insertions(+), 12 deletions(-)
drivers/ide/ide-cd.c +21 -12
@@ -340,8 +340,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) }ide_debug_log (IDE_DBG_RQ ,"%s: stat: 0x%x, good_stat: 0x%x, " -"rq->cmd_type: 0x%x, err: 0x%x\n" , __func__, stat, - good_stat, rq->cmd_type, err); +"rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x, err: 0x%x\n" , + __func__, stat, good_stat, rq->cmd[0 ], rq->cmd_type, err);if (blk_sense_request (rq)) {/*
@@ -849,7 +849,8 @@ static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq)static void ide_cd_request_sense_fixup (ide_drive_t *drive,struct request *rq) { -ide_debug_log (IDE_DBG_FUNC ,"Call %s\n" , __func__); +ide_debug_log (IDE_DBG_FUNC ,"Call %s, rq->cmd[0]: 0x%x\n" , + __func__, rq->cmd[0 ]);/* * Some of the trailing request sense fields are optional,
@@ -876,7 +877,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,if (!sense) sense = &local_sense; -ide_debug_log (IDE_DBG_PC ,"Call %s, rq->cmd[0]: 0x%x, write: 0x%x, " +ide_debug_log (IDE_DBG_PC ,"Call %s, cmd[0]: 0x%x, write: 0x%x, " "timeout: %d, cmd_flags: 0x%x\n" , __func__, cmd[0 ], write, timeout, cmd_flags);
@@ -1177,8 +1178,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)unsigned short sectors_per_frame =queue_hardsect_size (drive->queue) >>SECTOR_BITS ; -ide_debug_log (IDE_DBG_RQ ,"Call %s, write: 0x%x, secs_per_frame: %u\n" , - __func__, write, sectors_per_frame); +ide_debug_log (IDE_DBG_RQ ,"Call %s, rq->cmd[0]: 0x%x, write: 0x%x, " +"secs_per_frame: %u\n" , + __func__, rq->cmd[0 ], write, sectors_per_frame);if (write) {/* disk has become write protected */
@@ -1221,7 +1223,8 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)static void cdrom_do_block_pc (ide_drive_t *drive,struct request *rq) { -ide_debug_log (IDE_DBG_PC ,"Call %s, rq->cmd_type: 0x%x\n" , __func__, +ide_debug_log (IDE_DBG_PC ,"Call %s, rq->cmd[0]: 0x%x, " +"rq->cmd_type: 0x%x\n" , __func__, rq->cmd[0 ], rq->cmd_type);if (blk_pc_request (rq))
@@ -1257,9 +1260,6 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) } } -/* -* cdrom driver request routine. -*/ static ide_startstop_t ide_cd_do_request (ide_drive_t *drive,struct request *rq,sector_t block) {
@@ -1267,8 +1267,10 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,ide_handler_t *fn;int xferlen; -ide_debug_log (IDE_DBG_RQ ,"Call %s, rq->cmd_type: 0x%x, block: %llu\n" , - __func__, rq->cmd_type, (unsigned long long )block); +ide_debug_log (IDE_DBG_RQ ,"Call %s, rq->cmd[0]: 0x%x, " +"rq->cmd_type: 0x%x, block: %llu\n" , + __func__, rq->cmd[0 ], rq->cmd_type, + (unsigned long long )block);if (blk_fs_request (rq)) {if (drive->atapi_flags &IDE_AFLAG_SEEKING ) {
@@ -1412,6 +1414,10 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, *capacity =1 +be32_to_cpu (capbuf.lba); *sectors_per_frame = blocklen >>SECTOR_BITS ; + +ide_debug_log (IDE_DBG_PROBE ,"%s: cap: %lu, sectors_per_frame: %lu\n" , + __func__, *capacity, *sectors_per_frame); +return 0 ; }
@@ -1643,6 +1649,9 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf) maxspeed =be16_to_cpup ((__be16 *)&buf[8 +8 ]); } +ide_debug_log (IDE_DBG_PROBE ,"%s: curspeed: %u, maxspeed: %u\n" , + __func__, curspeed, maxspeed); + cd->current_speed = (curspeed + (176 /2 )) /176 ; cd->max_speed = (maxspeed + (176 /2 )) /176 ; }
Signature · 1 line
1.5.5.4
Bartlomiej Zolnierkiewicz
AppliedQuoted 4 lines · Borislav Petkov
Add some more verbosity to key function calls in ide-cd debug code. While at it, delete a superfluous comment.
Signed-off-by Borislav Petkov <[email protected]>
applied
PATCH 2/3 ide-cd: small drive type print fix
In reply to Borislav Petkov--- drivers/ide/ide-cd.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/ide/ide-cd.c +1 -1
@@ -1784,7 +1784,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)if ((cdi->mask &CDC_DVD_R ) ==0 || (cdi->mask &CDC_DVD_RAM ) ==0 )printk (KERN_CONT " DVD%s%s" , (cdi->mask &CDC_DVD_R ) ?"" :"-R" , - (cdi->mask &CDC_DVD_RAM ) ?"" :"-RAM" ); + (cdi->mask &CDC_DVD_RAM ) ?"" :"/RAM" );if ((cdi->mask &CDC_CD_R ) ==0 || (cdi->mask &CDC_CD_RW ) ==0 ) printk(KERN_CONT " CD%s%s",
Signature · 1 line
1.5.5.4
Re: [PATCH 2/3] ide-cd: small drive type print fix
Quoted 1 line · Borislav Petkov
Signed-off-by Borislav Petkov <[email protected]>
applied (though I fail to see "an added value" of this change)
Quoted 17 lines
--- drivers/ide/ide-cd.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/ide/ide-cd.c +1
-1@@ -1784,7 +1784,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)if ((cdi->mask &CDC_DVD_R ) ==0 || (cdi->mask &CDC_DVD_RAM ) ==0 )printk (KERN_CONT " DVD%s%s" , (cdi->mask &CDC_DVD_R ) ?"" :"-R" , - (cdi->mask &CDC_DVD_RAM ) ?"" :"-RAM" ); + (cdi->mask &CDC_DVD_RAM ) ?"" :"/RAM" );if ((cdi->mask &CDC_CD_R ) ==0 || (cdi->mask &CDC_CD_RW ) ==0 ) printk(KERN_CONT " CD%s%s",
Re: [PATCH 2/3] ide-cd: small drive type print fix
Quoted 4 lines · Bartlomiej Zolnierkiewicz
Quoted 1 line · Borislav Petkov
Signed-off-by Borislav Petkov <[email protected]>applied (though I fail to see "an added value" of this change)
It simply makes the format consistent with the lines below: CD-R/RW - which is the more common way of enumerating supported media you find in different specs than DVD-R-RAM, don't you think?
Quoted 17 lines
Quoted 17 lines
--- drivers/ide/ide-cd.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/ide/ide-cd.c +1
-1@@ -1784,7 +1784,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)if ((cdi->mask &CDC_DVD_R ) ==0 || (cdi->mask &CDC_DVD_RAM ) ==0 )printk (KERN_CONT " DVD%s%s" , (cdi->mask &CDC_DVD_R ) ?"" :"-R" , - (cdi->mask &CDC_DVD_RAM ) ?"" :"-RAM" ); + (cdi->mask &CDC_DVD_RAM ) ?"" :"/RAM" );if ((cdi->mask &CDC_CD_R ) ==0 || (cdi->mask &CDC_CD_RW ) ==0 ) printk(KERN_CONT " CD%s%s",
Signature · 2 lines
Regards/Gruss,
Boris.Re: [PATCH 2/3] ide-cd: small drive type print fix
Quoted 9 lines · Borislav Petkov
Quoted 4 lines · Bartlomiej Zolnierkiewicz
Quoted 1 line · Borislav Petkov
Signed-off-by Borislav Petkov <[email protected]>applied (though I fail to see "an added value" of this change)
It simply makes the format consistent with the lines below: CD-R/RW - which is the more common way of enumerating supported media you find in different specs than DVD-R-RAM, don't you think?
Indeed, thanks for explaining it.
PATCH 3/3 ide-cd: shorten ide_cd_request_sense_fixup's param list
In reply to Borislav Petkov... since HWGROUP(drive)->rq points to the same rq as in the irq handler. While at it, remove stale comment.
There should be no functionality change resulting from this patch.
--- drivers/ide/ide-cd.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-)
drivers/ide/ide-cd.c +4 -5
@@ -843,12 +843,11 @@ static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq) rq->q->prep_rq_fn (rq->q, rq); } -/* -* All other packet commands. -*/ -static void ide_cd_request_sense_fixup (ide_drive_t *drive,struct request *rq) +static void ide_cd_request_sense_fixup (ide_drive_t *drive) { +struct request *rq =HWGROUP (drive)->rq; +ide_debug_log (IDE_DBG_FUNC ,"Call %s, rq->cmd[0]: 0x%x\n" , __func__, rq->cmd[0 ]);
@@ -1021,7 +1020,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)cdrom_end_request (drive, uptodate);return ide_stopped; }else if (!blk_pc_request (rq)) { -ide_cd_request_sense_fixup (drive, rq); +ide_cd_request_sense_fixup (drive);/* complain if we still have data left to transfer */ uptodate = rq->data_len ?0 :1 ; }
Signature · 1 line
1.5.5.4
Re: [PATCH 3/3] ide-cd: shorten ide_cd_request_sense_fixup's param list
Quoted 1 line · Borislav Petkov
... since HWGROUP(drive)->rq points to the same rq as in the irq handler. While
Since we already have obtained rq pointer why not pass it to the helper function instead of having the helper function waste cycles on it?
Moreover it results in slightly bigger code...
Quoted 1 line
at it, remove stale comment.
I applied this part only.
Quoted 36 lines
There should be no functionality change resulting from this patch.
Signed-off-by Borislav Petkov <[email protected]>--- drivers/ide/ide-cd.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-)drivers/ide/ide-cd.c +4
-5@@ -843,12 +843,11 @@ static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq) rq->q->prep_rq_fn (rq->q, rq); } -/* -* All other packet commands. -*/ -static void ide_cd_request_sense_fixup (ide_drive_t *drive,struct request *rq) +static void ide_cd_request_sense_fixup (ide_drive_t *drive) { +struct request *rq =HWGROUP (drive)->rq; +ide_debug_log (IDE_DBG_FUNC ,"Call %s, rq->cmd[0]: 0x%x\n" , __func__, rq->cmd[0 ]);@@ -1021,7 +1020,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)cdrom_end_request (drive, uptodate);return ide_stopped; }else if (!blk_pc_request (rq)) { -ide_cd_request_sense_fixup (drive, rq); +ide_cd_request_sense_fixup (drive);/* complain if we still have data left to transfer */ uptodate = rq->data_len ?0 :1 ; }