Skip to contentSkip to conversation

APIC misconfiguration

DISCUSSION Andrey Batyiev 3 participants 7 messages Oct 6, 2008 – Oct 7, 2008

lore
Share & tools
lore
#0 lore raw

Hello everyone

I'm trying to create touchscreen driver for Wibrain UMPC. I found out that device doesn't emit interrupts until I switch polarity field in IO_APIC_route_entry. To do this, I need to export ioapic_read_entry and ioapic_write_entry symbols from arch/x86/kernel/io_apic_{32,64}.c Is there any other (better) way to do this?

Thanks,
Andrey

#1 lore raw

[Andrey Batyiev - Mon, Oct 06, 2008 at 07:23:08PM +0300]

| Hello everyone
| 
| I'm trying to create touchscreen driver for Wibrain UMPC. I found
| out that device doesn't emit interrupts until I switch polarity
| field in IO_APIC_route_entry. To do this, I need to export
| ioapic_read_entry and ioapic_write_entry symbols from
| arch/x86/kernel/io_apic_{32,64}.c
| Is there any other (better) way to do this?
| 
| Thanks,
|    Andrey
| 

Hi Andrey,

actually it's not a bug of APIC itself but rather misconfigured device I think. Not sure thru which bus it does work (pci i suppose) but I think you better are to fix it on more higher level like in config space of this device. PCI guys could tell you more about this area I believe.

- Cyrill -

#2 lore raw

Hi Cyrill,

Quoted 5 lines

actually it's not a bug of APIC itself but rather misconfigured device I think. Not sure thru which bus it does work (pci i suppose) but I think you better are to fix it on more higher level like in config space of this device. PCI guys could tell you more about this area I believe.

Device is connected to ISA bus and haven't any autoconfiguration methods.

Thanks,
Andrey

#3 lore raw

[Andrey Batyiev - Mon, Oct 06, 2008 at 07:55:28PM +0300]

| Hi Cyrill,
| 
| > actually it's not a bug of APIC itself but rather misconfigured
| > device I think. Not sure thru which bus it does work (pci
| > i suppose) but I think you better are to fix it on more higher
| > level like in config space of this device. PCI guys could tell
| > you more about this area I believe.
| 
| Device is connected to ISA bus and haven't any autoconfiguration methods.
| 
| Thanks,
|    Andrey
| 

hmm... don't we have any ISA quirks already? If this device support PnP there should be descriptor for irq line where you could change it since I don't believe it would be a first device in kernel which behave not as supposed and developers has to override some configs bits. Hope it help (i didn't check ISA code though -- too busy now).

- Cyrill -

#4 lore raw
Quoted 5 lines

hmm... don't we have any ISA quirks already? If this device support PnP there should be descriptor for irq line where you could change it since I don't believe it would be a first device in kernel which behave not as supposed and developers has to override some configs bits. Hope it help (i didn't check ISA code though -- too busy now).

Well, it seems device haven't either PnP or isapnp doesn't detect it.

Thanks,
Andrey

#5 lore raw

[Andrey Batyiev - Mon, Oct 06, 2008 at 08:30:42PM +0300]

| > hmm... don't we have any ISA quirks already? If this device support
| > PnP there should be descriptor for irq line where you could change it
| > since I don't believe it would be a first device in kernel which behave
| > not as supposed and developers has to override some configs bits.
| > Hope it help (i didn't check ISA code though -- too busy now).
| 
| Well, it seems device haven't either PnP or isapnp doesn't detect it.
| 
| Thanks,
|    Andrey
| 

Lets better wait for advices for other developers. Writting directly to io-apic routing table is not a good idea i think. Some quirks should be involved.

- Cyrill -

#6 lore raw
In reply to Andrey Batyiev
Quoted 7 lines · Andrey Batyiev
Quoted 5 lines

hmm... don't we have any ISA quirks already? If this device support PnP there should be descriptor for irq line where you could change it since I don't believe it would be a first device in kernel which behave not as supposed and developers has to override some configs bits. Hope it help (i didn't check ISA code though -- too busy now).

Well, it seems device haven't either PnP or isapnp doesn't detect it.

It'd be more likely to be acpipnp nowadays. Does it appear anywhere in /sys/class/pnp?

Signature · 1 line
Matthew Garrett | [email protected]