powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
Subsystems (2)
PATCH 1/1 powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
The RTC is sitting on the I2C1 bus at address 0x68. RTC interrupt signal is connected to the IPIC's EXT3 interrupt line.
Signed-off-by Anton Vorontsov <[email protected]>
--- arch/powerpc/boot/dts/mpc8377_mds.dts | 7 +++++++ arch/powerpc/boot/dts/mpc8378_mds.dts | 7 +++++++ arch/powerpc/boot/dts/mpc8379_mds.dts | 7 +++++++ 3 files changed, 21 insertions(+), 0 deletions(-)
arch/powerpc/boot/dts/mpc8377_mds.dts +7 -0
@@ -136,6 +136,13 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; }; i2c@3100 {
arch/powerpc/boot/dts/mpc8378_mds.dts +7 -0
@@ -136,6 +136,13 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; }; i2c@3100 {
arch/powerpc/boot/dts/mpc8379_mds.dts +7 -0
@@ -136,6 +136,13 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; }; i2c@3100 {
Signature · 1 line
1.5.6.3
Kumar Gala
AppliedQuoted 9 lines · Anton Vorontsov
The RTC is sitting on the I2C1 bus at address
0x68. RTC interrupt signal is connected to the IPIC's EXT3 interrupt line.Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/boot/dts/mpc8377_mds.dts | 7 +++++++ arch/powerpc/boot/dts/mpc8378_mds.dts | 7 +++++++ arch/powerpc/boot/dts/mpc8379_mds.dts | 7 +++++++ 3 files changed, 21 insertions(+), 0 deletions(-)
applied.
- k