cxgb3 - simplify port type struct and usage

index 02dd69b..455ef52 100644
@@ -54,7 +54,6 @@ struct port_info {
 	struct adapter *adapter;
 	struct vlan_group *vlan_grp;
 	struct sge_qset *qs;
-	const struct port_type_info *port_type;
 	u8 port_id;
 	u8 rx_csum_offload;
 	u8 nqsets;

@@ -282,6 +281,7 @@ int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb);
 void t3_os_ext_intr_handler(struct adapter *adapter);
 void t3_os_link_changed(struct adapter *adapter, int port_id, int link_status,
 			int speed, int duplex, int fc);
+void t3_os_phymod_changed(struct adapter *adap, int port_id);
 
 void t3_sge_start(struct adapter *adap);
 void t3_sge_stop(struct adapter *adap);

index bf22e56..f4e046e 100644
@@ -122,7 +122,9 @@ static struct cphy_ops ael1002_ops = {
 int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
 			int phy_addr, const struct mdio_ops *mdio_ops)
 {
-	cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops);
+	cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE,
+		   "10GBASE-R");
 	ael100x_txon(phy);
 	return 0;
 }

@@ -178,7 +180,9 @@ static struct cphy_ops ael1006_ops = {
 int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
 			     int phy_addr, const struct mdio_ops *mdio_ops)
 {
-	cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops);
+	cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE,
+		   "10GBASE-SR");
 	ael100x_txon(phy);
 	return 0;
 }

@@ -198,7 +202,9 @@ int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
 {
 	unsigned int stat;
 
-	cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops);
+	cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
+		  "10GBASE-CX4");
 
 	/*
 	 * Some cards where the PHY is supposed to be at address 0 actually

@@ -256,6 +262,8 @@ static struct cphy_ops xaui_direct_ops = {
 int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
 			    int phy_addr, const struct mdio_ops *mdio_ops)
 {
-	cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops);
+	cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops,
+		  SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
+		  "10GBASE-CX4");
 	return 0;
 }

index 78c10d3..e83a360 100644
@@ -193,8 +193,6 @@ struct mdio_ops {
 struct adapter_info {
 	unsigned char nports;	/* # of ports */
 	unsigned char phy_base_addr;	/* MDIO PHY base address */
-	unsigned char mdien;
-	unsigned char mdiinv;
 	unsigned int gpio_out;	/* GPIO output settings */
 	unsigned int gpio_intr;	/* GPIO IRQ enable mask */
 	unsigned long caps;	/* adapter capabilities */

@@ -202,13 +200,6 @@ struct adapter_info {
 	const char *desc;	/* product description */
 };
 
-struct port_type_info {
-	int (*phy_prep)(struct cphy *phy, struct adapter *adapter,
-			int phy_addr, const struct mdio_ops *ops);
-	unsigned int caps;
-	const char *desc;
-};
-
 struct mc5_stats {
 	unsigned long parity_err;
 	unsigned long active_rgn_full;

@@ -548,7 +539,6 @@ enum {
 
 /* PHY operations */
 struct cphy_ops {
-	void (*destroy)(struct cphy *phy);
 	int (*reset)(struct cphy *phy, int wait);
 
 	int (*intr_enable)(struct cphy *phy);

@@ -569,8 +559,10 @@ struct cphy_ops {
 
 /* A PHY instance */
 struct cphy {
-	int addr;		/* PHY address */
+	int addr;			/* PHY address */
+	unsigned int caps;		/* PHY capabilities */
 	struct adapter *adapter;	/* associated adapter */
+	const char *desc;		/* PHY description */
 	unsigned long fifo_errors;	/* FIFO over/under-flows */
 	const struct cphy_ops *ops;	/* PHY operations */
 	int (*mdio_read)(struct adapter *adapter, int phy_addr, int mmd_addr,

@@ -595,10 +587,13 @@ static inline int mdio_write(struct cphy *phy, int mmd, int reg,
 /* Convenience initializer */
 static inline void cphy_init(struct cphy *phy, struct adapter *adapter,
 			     int phy_addr, struct cphy_ops *phy_ops,
-			     const struct mdio_ops *mdio_ops)
+			     const struct mdio_ops *mdio_ops,
+			      unsigned int caps, const char *desc)
 {
-	phy->adapter = adapter;
 	phy->addr = phy_addr;
+	phy->caps = caps;
+	phy->adapter = adapter;
+	phy->desc = desc;
 	phy->ops = phy_ops;
 	if (mdio_ops) {
 		phy->mdio_read = mdio_ops->read;

index fea2c71..5b8251d 100644
@@ -2368,7 +2368,7 @@ static void check_link_status(struct adapter *adapter)
 		struct net_device *dev = adapter->port[i];
 		struct port_info *p = netdev_priv(dev);
 
-		if (!(p->port_type->caps & SUPPORTED_IRQ) && netif_running(dev))
+		if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev))
 			t3_link_changed(adapter, i);
 	}
 }

@@ -2731,7 +2731,7 @@ static void __devinit print_port_info(struct adapter *adap,
 		if (!test_bit(i, &adap->registered_device_map))
 			continue;
 		printk(KERN_INFO "%s: %s %s %sNIC (rev %d) %s%s\n",
-		       dev->name, ai->desc, pi->port_type->desc,
+		       dev->name, ai->desc, pi->phy.desc,
 		       is_offload(adap) ? "R" : "", adap->params.rev, buf,
 		       (adap->flags & USING_MSIX) ? " MSI-X" :
 		       (adap->flags & USING_MSI) ? " MSI" : "");

276 lines not on this page · raw message

index 8f1b0d3..68e6334 100644
@@ -224,6 +224,9 @@ static struct cphy_ops vsc8211_ops = {
 int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
 			int phy_addr, const struct mdio_ops *mdio_ops)
 {
-	cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops);
+	cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
+		  SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
+		  SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
+		  SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
 	return 0;
 }